Can you work out what is missing in photo?

This is a clip of the properties bar when inserting a link in DW CS6:
Perhaps you can tell me what is missing and how to get DW to display it on my laptop?
Its the same whatever resolution I set the laptop to.
Just one of the irritations of DW CS6!

Hi Nancy,
I am using a new Sony Vaio with a 17" wide screen laptop at 1910x1080 definition. The clip was taken when the panel was at its widest possible.
Due to the high definition of this computer, the text is very small to read, so I set it up Windows 7 Ultimate to 150% which makes it readable.
Once I reduce this to 100%, the Dreamweaver panel is completely visible. Only problem is that when I can see the fields, I cannot read them easily, with resultant eye strain after a few hours use.
Looking into it further, it seems that Dreamweaver panels are not constructed using CSS which I would have assumed they would be, but by using a lot of graphics with fields inserted into them.
For a company that is supposed to be at the forefront of web design, who's programs construct websites that will fit any size of screen and still remain readable, it seems a pity that they cannot construct their own screen displays in a similar manner.
I have seen the argument that many people use about "screen real estate" being the reason why the icons and text are so small, but in these days of providing accessible websites, perhaps Adobe should turn their attention to those of us who may not have 100% vision, and provide accessible programs.
It matters not lot how much screen is free for the work area if you cannot see the icons! Why not an option to increase the text size per se, rather than just in certain areas?
They also specify a screen resolution that is no longer available on laptops, or if it is, I have been unable to find one with a large enough screen - 1280x800 display with 16-bit video card.
Modern screens seem only to work in native resolution, so perhaps Adobe should take a walk in the market place and look at what screens are available.
The whole usability thing has gotten worse with CS6, especially if you use Photoshop - (which mostly I don't thank goodness) with a grey on grey on grey interface. (though there is a coloured icons option for some parts)
I personally think that until someone sues Adobe for not catering for people with visual disabilities, they will do nothing about it.
I will be putting in a request for this, but doubt that any suitable response will be made.
Thanks for looking.
Howard

Similar Messages

I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

Acrobat XI is not distributed with Designer. Designer is now a separate product. You can create forms in Acrobat as an AcroForm or using Forms Central (an online forms program). You can print the form to a new PDF and then recreate the fields in Acrobat using the recognize form fields. You will likely have to fix the form fields, but that would be the process. Generally, once a form is taken to Designer, you can't bring it back without such steps.
Designer is available with AA8 - AAX, but since is a separate product as I indicated.

How can you found out what computers you are home sharing so you can delete some, How can you found out what computers you are home sharing so you can delete some

How can you find out what computers you are sharing with so you can delete some

Oh, have you brought up so many good points. Not to take us off-topic, but I could rant all day about Eloqua consulting firms who let low-level employees (Eloqua skill-wise) loose on clients projects. Just not fair for either the employee or client. There was one company that did this to me a few years ago, and since then dozens of people have asked me about them for a reference. Needless to say, they never get a good one from me, and have likely lost hundreds of thousands of dollars in projects because of this. Not worth it in the long-run to cut corners.
Back to the topic at hand....
You really hit the nail on the head in so many ways. It really all does come down to one thing: hard work. There are no shortcuts. Always keep learning. Embrace every Eloqua challenge you can, and never say never. Never be fearful of being wrong by asking something 'silly', or 'looking stupid'. I remember several times that I've submitted Eloqua support tickets, or tickets to other related vendors about things that I was convinced were bugs/major issues. Turned out to be my mistake. But that's ok. You brush off, stand back up, and learn from them.
And finally, be modest. You will never know everything about Eloqua. Be willing to learn from others, and know that there actually may be a better way to do something than you may have spent days or weeks working on.

How can you find out what generation your iPod touch is?

How can you find out what generation your iPod touch is?

Hi,
Here is help for the operating system:
If you are locked to iOS 3 then you have an iPod Touch 1st Gen.
If you are locked to iOS 4 then you have an iPod Touch 2nd Gen.
If you are locked to iOS 5 then you have an iPod Touch 3rd Gen.
If you are locked to iOS 6 then you have an iPod Touch 4th Gen.
If you can get iOS 7 and have an iPhone 5 sized screen [bigger] you have the current iPod Touch 5th Gen.
I assume since it says you have iOS 5.1.1 you have an iPod Touch 3rd Gen.
Also, you may want to sync it so iTunes can tell you or you can look at the model number on the back.
Hope this helped.

HT4211 how can you find out what kb are being used by what apps

how can you find out what kb are being used by what apps there is always alot of kb being used even when I don't use my phone

Go into settings , general, usage and it tells you what the apps use. If your refering to the memory storage of the apps.

How can you find out what time you were on a website on on your iPod?

How can you find out what time and day you were on a certain website on your iPod?

You can find the day in Safari's History, but not the time.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

I can't work out what apps use the internet. Please help

I cna't work out what uses the internet and what doesn't on my iphone4 please help????

Settings>WiFi>Off...then Settings>General>Network>Cellular Data>Off...then start launching your apps, those that require a data connection either won't work or will generate an error message. You could also accomplish the same thing by putting your phone in Airplane Mode.

I can't work out how to transfer my photos and what not from my iPhone 4 to my iPhone6 via iCloud

I've recently purchased an iphone 6 and am trying to transfer all my photos and documents from my iphone 4 to my iphone 6 via iCloud.
However I can't seem to work out how to do it.
Please someone help!

If you're backing up your iPhone 4 to iCloud, I believe you can just restore your 6 from that backup.
What have you tried?
~Lyssa

Can't work out what is wrong with my nano

The 4th gen Ipod nano isn't recognised by itunes and doesn't turn on, when I try to turn it on it comes up with an hour glass and doesn't do anything else.I have tried reseting it and charging it overnight but I can't work it out. I bought it off ebay so I'm worried it could be fake as I havn't heard of a hourglass coming up on an Ipod and I cant find it when I search it on google.
Does this happen to 'real' ipods?
Thanks

Hi Carnageboy
Check the back of your iPod and you should see the serial number under the capacity label (it will be tiny text)
Enter the iPod's SN into Apples Warranty checker to see if there is any warranty left:
https://selfsolve.apple.com/GetWarranty.do
If there warranty, then call Apple for support.
Regards
LG.

How can you find out what launches / runs something else?

In poking around with my system trying to get it to run things for all users, at some point in the past I did something which causes a script to run when ever I log in.
This script is located in the application directory, and if I put any script called Login.sh there, it runs. It runs for any user too.
I have no idea what I did to cause this and I can't figure out a way to find out who is launching it.
I looked in the loginwindow.plist files, the com.apple.loginwindow.plist files, the ttys file in /etc and in the RC files too.
Is there an easy way to find out (maybe by putting something in that login.sh script) what is running it? I know it is the 'root' user.
I thought maybe if I could search all files on my HD for the word "Login.sh" I could find the culprit. I do not know how to do that though.
Any ideas?

You look up the process in the same output and find out what the parent process is. (after crossing your fingers and hoping it's not something generic like launchd)

W can you find out what is in your icloud

I can I find out just what is stored in icloud. Having trouble with photo stream for pictures loaded on iphone taken prior to buying the ipad.

Having trouble with photo stream for pictures loaded on iphone taken prior to buying the ipad.
Nancy...
Try here > iCloud: Photo Stream Troubleshooting

Can you figure out what was the problem in this simple 3 liner code?

Hello, below is a class to demonstrate a problem I see that I can't understand. I create an instance of the enclosing
class at class level, another instance in static main method. Class below fails at run time with stack overflow exception. It's all fine if one of those two instantiation steps is removed, What is wrong can anyone any ideas?
public class App
// create instance of this class
App app = new App();
public static void main( String[] args )
// create instance of this class again.
App app2 = new App();
System.out.println( "Hello World!" );
}

As soon as a new instance of 'App' is created, 'App app = new App();' is called, which calls 'App app = new App();' etc. Hence the stack overflow.
When you remove 'App app = new App();', obviously, the stack overflow does not occur. And when your remove 'App app2 = new App();' the 'App' class is never instantiated and therefore, the exception is also not thrown.

Can you find out what packages a class has imported?

Hi all, I start my final year at uni in september and at the moment i'm just experimenting with stuff while i try and decide what to do for my final year project.
Without going into too much detail what i want to be able to do is for the client to "submit" a class file that is then dynamically loaded and run on the server. Obviously this has security implications so what i was wondering was if it is possible to determine what packages a class has imported from the actual classfile.
I've looked through the vm spec but haven't been able to find anything theyre that looks like it'll help. Any suggestions or ideas (or solutions!) would be much appreciated.
Thanks. Matt.

You could use the Class.getDeclaredClasses() to see the class types that exist as members, but that won't do you any good since the class will have already undergone static initialization within your VM, and the security breach would have already been made. You could inspect the constant pool in the class data to check what other classes are referenced but then that brings up several questions:
1 - How do you know which classes are bad? Even if you define a set, copies can be created in new packages (or simply aliased) so that the list is invalid.
2 - How do you know the class you are loading is not malicious? A client class may not reference any external class but may be malicious itself.
3 - The offending class might use reflection exclusively to reference classes without leaving a trace in the class file. This would be absolutely impossible to detect.
Your only choices are (a) to use signed classes, and make it the responsibility of someone to review the classes and sign them, or (b) install your own Security Manager to catch all prohibited activity, or (c) check as classes are referenced in the classloader. Option (a) is the best method, but (b) or (c) might work in a very restricted environment.

ITunes isn't working, and I can't work out what to do

Hi, been trying (half-heartedly for the last 8 months) to sort out iTunes on our eMac. We currently have iTune 4.9 on, but it won't play anything. Have tried in the past to delete the application, as advised by someone previously, but I can't as I haven't got it's root or something to that effect.
Please help as my husband can't use his music!

Hello jammymummy,
sorry to hear about your iTunes woes.
8 months.... Ouch! I don't have a solution for
yall but I do have a couple of suggestions.
1. Post your question again; however, post
it at the Mac OS X v10.3 & earlier category. It is located to the right of the
iTunes category on the discussions page. I have seen questions regarding
v10.2 there. Include the part about how you may have deleted another
iTunes version. Important... before you post the question open iTunes
and in the header bar under iTunes select about iTunes. Write down
which version you have (3 numbers) to include it in your post. Then go the
apple at the top left of the screen and from the pull down menu select
about this Mac. Again write down 3 numbers which version of Mac OS X
you have. Then select more info so you can include in your post your
CPU speed, how much RAM and HD size. In your finder window look at the
bottom to see how much space is left on it.
2. Since you mentioned the deleting files it would
be a good idea to do some hard drive routine maintenance.
Nothing in-depth or difficult usually just a few steps.
Ask about repairing permissions with disk utility.
As I do not have v10.2 I can not help yall further.
I hope these suggestions will help you some.
Like millions of others we just want our Macs to do
a few things and music is one of those things.
8 months...Wow! Yall have patience. Hope this helps you.
Good Luck & Cheers,
A

How can you find out what number comment you are on within the comments list?

Hi everyone,
I have looked around but I cannot seem to find an answer to what seems a very simple request.
I have a PDF with over a hundred comments on it and I am making (slow) progress through the comments list. I would like to estimate how long this job will take me to complete by looking at the time I have spent on the job and a which comment number I am at (e.g. I am currently at comment 60 of 120 - half way through).
I cannot seem to find a way to do this without manually counting the number of comments I have been through already - which seems a watse of my time.
Is there an easy way to do this? I am sure I am missing something simple here.
Thanks in advance,
twordz

Sorry, I guess I mis-spoke. I thought that it will be numbered sequentially
for the entire document, but I guess it's per page.
The problem with numbering comments is that their internal order does not
necessarily correspond to their physical location in the file. The internal
order is based on the order in which they were created. Having said that,
it is possible to generate a summary of the comments with sequential
numbers for the entire file (not just page by page), but it would require a
custom-made script.

Can you work out what is missing in photo?

Similar Messages

Maybe you are looking for