Can you zoom in more then 100% without using the loop?

If you press the 'Z' key, your photo will zoom to 100%, but is there a way to zoom more then 100%? I know that I can use the loop tool to do that, but I'd prefer to just have my viewer display at 200% instead.
Thanks,
Kenny

If you display the image at full screen, then zoom, your image will appear to be way more magnified. Can't say exactly why.

Similar Messages

  • Can you have PXIe 1062Q turn on without using the power button

    I am using a PXIe-1062Q for a test project that will be inside of a protective case.  The power button to the chassis will be covered by a plate on the protective case that will make it annoying and difficult to power on using the power button on the chassis.  The chassis will be plugged into a trip-lite power strip that is mounted in the case.  Is there any way that I can have the chassis power on when I turn on the power strip?
    Solved!
    Go to Solution.

    I found an alternate route.  Under the BIOS of the controller I changed the AC power Loss settings to TURN on after the AC power is returned.  This allows me to use the power strip in my configuration to control the AC power distributed to the controller.  The following steps will describe how I completed this.
    Power on the PXIe-8115 controller.
    A message will appear on your monitor Press <DEL> to enter SETUP
    Select "delete" (quickly, because you don't have much time before the window disappears and the controller continues to load normally.
    This will open up the BIOS Main Menu
    Select Advanced tab ( use arrow keys to highlight different tabs and selections, select specific setting to change with "enter"
    Select >>Power/Rest Configuration
    Change configuration to power on when AC power is restored.
    The controller can be shut down normally using the start menu and "shut down"
    The chassis's power button is still capable of turning on the power to the controller, but now when I shut off the AC power strip, and then return the power, the chassis controller powers up.

  • HT204380 Can you FaceTime between 2 iPads that are using the same apple ID but separate emails?

    Can you FaceTime between 2 iPads that are using the same apple ID but separate emails?

    Yes......I do so all the time.

  • Can I install CS5 student teacher edition without using the disk on my 2nd computer as I do not have a disk drive

    I have CS5 student and teacher edition. I have a CD. I want to install it onto my mac book pro (2nd computer), can I do this without using the disk.

    Thanks very much, well I'm still struggling.
    The link kind of worked [took a couple of hours ] but then I wasn't able to fully install it, it said it was partially installed and I didn't know where to go from there. A red disk appeared on my desk top, I clicked it and another window appeared but then I couldn't do anything with it. It said I had to access the download manager but I don't know what a download manager is, it certainly isn't where my documents download to.
    My original CD is for student teacher edition which I still fall under, I have a serial number for that edition.
    If you are able to shed any further light on this I would be very grateful.

  • If i purchase a movie from iTunes on my Windows 7 PC is there a way I can download it and watch it offline without using the iTunes program?

    I have been trying to figure out the answer to this all day I want to purchase The Interview I know you can download but I want to know if you can watch it offline without using the iTunes program like will i get the file to this movie i purchased?

    Thank you i been looking for a  answer to this all day but I couldn't find anything on it! Now I know I will find a file with it! thanks!

  • I have some old cd's I have burned on itunes. How can I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe . Please be gentle.

    I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle

    Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
    However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD)  - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
    Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
    Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
    Steven

  • In Elements 12 why can't I suddenly not reposition layers without using the layer panel?

    In Elements 12 I have always been able to drag photos from the bin onto a background and easily move them or alter them simply by clicking on those photo/slayers while working on the same background without using the layer panel.  A couple days ago I suddenly have to show the layer panel and click on that particular layer in the panel before I am able to move, alter, or delete a particular layer. Also, every time I open a new image or blank file to use as a background, I am suddenly working with a locked background which I don't want, and the directions to un-lock don't seem to work, if that has something to do with it.  I didn't change any settings that I know of.

    For editing purposes, the thrust of the program is to work in layers, and to do that it is necessary to have the layers palette in view so that the appropriate layer can be made the active layer.
    The background layer is locked by default. You can probably drag the padlock to the trash can, or, do your work on a duplicate layer which will come in unlocked.
    Try dragging photos from the layers palette to the work area, not up from the photobin to the work area.
    Also, go to Edit>Preferences>General and be sure that "Allow Floating Documents in Full Edit Mode" is checked.

  • Can you delete an E-mail account without deleting the associated E-mails

    I was going to delete my Mindspring account from the mac mail, but it says that all the mail will also be deleted, or at least, that is how I interpet what is stated.   Soooo, is there a way delete my mindspring account without deleting the mail.  I am trying to take mindspring off as an option when sending E-mail
    Thanks
    Stan

    In Mail 4.6 (10.6) I'm not seeing only seeing Import Mailbox, no export. But Mail can be archived
    Note: I'm not getting the Archive option with Cmd, but I do get it with a right-click.
    Archiving mailboxes
    You can archive (create a backup copy) of a mailbox so you can retrieve messages if needed.
    To archive a mailbox:
    Select one or more mailboxes to archive.
    To select mailboxes that are next to each other (contiguous) in the list, hold down Shift as you click the first and last mailbox; to select mailboxes that are not next to each other in the list, hold down Command as you click each mailbox.
    Choose Mailbox > Archive Mailbox, or choose Archive Mailbox from the Action pop-up menu (looks like a gear) at the bottom of the sidebar.
    Choose a folder or create a new folder where you want to store the archives, and then click Choose.
    Mail archives the mailboxes as .mbox packages. If you’ve already archived a mailbox, Mail does not overwrite the existing file but appends a number to the filename to create a new version of it.
    If you need to recover messages, you can import an archived .mbox file as “Mail for Mac OS X.”
    Importing mailboxes
    If you set up Time Machine to back up files, you can use it to restore previous versions of a mailbox or a message. Time Machine deletes older backups to make room for new ones as the backup disk fills up, so older backups of Mail might be deleted.
    Message was edited by: WZZZ

  • Can you make a multiple track selection without using a modifier key?

    i think this is mainly a wishlist kind of question as i'm pretty certain it's not possible. while the track tool can be accessed with a single key command, in order to select multiple tracks, you have to hold down the shift key. in FCP, the track tool had several options. for instance, TTTT would select all tracks forward but you could map this to a single key. so many things about premiere are great, but certain keyboard shortcuts are sadly lacking.

    yes, really. if i do something more than 5 times in any given day then i'd like to do it as efficiently and quickly as possible. as an editor, i use the select all tracks forward command in FCP at least 20 times a day, but probably more. so even though it's not a "big deal", it does slow down my workflow when i have to hit 2 keys. it's not a big deal to go to the post office but it really makes life easier when the mail carrier stops at my house.

  • How can i turn off Find My iPad without using the iPad?

    My swipe screen has stopped working completely on my iPad. Very disappointing as it is only 18 months old and has been well looked after! I have tried holding down the off/on button and menu button to reboot but this doesn't work. I have now logged the fault with Apple and have an appointment to see someone in the support team this Monday. However, I wanted to try one more thing. I want to restore to factory settings as I've read that this could resolve the problem. When I plug it in to iTunes and try to restore iPad i get a warning message telling me I need to go to iCloud settings on my iPad and turn off Find My iPad before restoring. As I cannot use the iPad I cant do it from there. Is there another way? Please help me, I want to weep!

    FORCE IPAD INTO RECOVERY MODE (this will disable Find My iPhone)
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • Can I get a Mac email address without using the cloud?

    Can I get a Mac email address without having to use the cloud?  The OS on my desktop computer has not been upgraded to support it yet, but my phone will.

    Apple don't provide @mac.com addresses anymore. They haven't done for years.
    You can get an @me.com email address but ony by signing up for iCloud on an iOS device or Mac.

  • How can you develop photo galleries with multiple pages using the web module?

    Going through the web module I can see there are many options for developing a web page with a single collection of photos.  How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

    This thread will give you several ideas.
    Re: How do you embed a gallery into an existing website?

  • How can I copy bookmarks from another PC without using the resotre not to loose the ones on the curtrent PC

    I want to copy bookmarks from another PC not using the restore function inorder not to delete bookmarks on current PC

    Export them to an HTML file, then import the HTML file to the other computer, that will add the bookmarks to those that already exist.
    * https://support.mozilla.com/kb/Exporting+bookmarks+to+an+HTML+file
    * https://support.mozilla.com/kb/Importing+Bookmarks+from+an+HTML+File

  • How can I zoom between 50% to 100%

    How can I zoom between 50% to 100%
    50% is too small while 100% is too big
    Because my Comp height and width is very different , fit is not useful for me
    so do anyone know how can I zoom between 50% to 100% ?

    Post the code you currently have

  • Free Goods  more then 100%

    Hi,
    while enter the master data in VBN1 for free goods (Inclusive)
    system is not allowed me to enter the more free goods more then 100%
    For Ex : Product A :  7Qty Purchase i want to give him 10Qty free bt system is nt allowed me
    while enter this system is giving me message (The additional quantity is greater than or equals                   7)
    so pls. help me for resloved this issue
    Regards
    Prashant Desai

    Hi,
    Please check the following it might help you
    Unchange Free Goods Quantity in sales order
    free goods.
    regards
    thenmozhi

Maybe you are looking for