Can ZEN look for registry keys and modify them?

I found some registry keys I need to change. But they are in the HK_USERS
section of the registry which will be different on every PC. Can I make ZEN
search for the key name and change it fi found?
[HKEY_USERS\S-1-5-21-2238441965-2819776847-193749584-1006\Software\Novell\GroupWise\Address
Book - User Interface\RFQ Options]
"Auto Delete Enabled"="Yes"
"Save Received from Internal"="No"
"Save Sent to Internal"="No"
"Auto Delete - Amount"=dword:00000001
"Auto Delete - Units"="Weeks"
[HKEY_USERS\S-1-5-21-2238441965-2819776847-193749584-1006\Software\Novell\GroupWise\Address
Book - User Interface\Search Books]
@="Selected List, Manual RFQ"
"AB.4E6F76656C6C47576162703139393500.Novell GroupWise Address
Book"=dword:00000000
"AB.0081D836918BCE1187EB00805FB4B2BE.Frequent Contacts"=dword:00000001

Robin Witkop-Staub,
> I found some registry keys I need to change. But they are in the HK_USERS
> section of the registry which will be different on every PC. Can I make ZEN
> search for the key name and change it fi found?
But they should be the same for CURRENT_USER. Ie HKEY_USERS is just all users'
keys.
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

Similar Messages

  • The hard drive on my MacBook died and I had it replaced. I can't locate my website files and every time I try to open my idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password?

    The hard drive on my MacBook died and I had it replaced. Now I can't locate my website files and every time I try to open my finder/idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password? Any suggestions out there

    Arty ~ Welcome to the Support Communities. iWeb can't import/open published HTML/media files on your iDisk. iWeb can only open its key Domain file which contains your site data — it's usually located here:
    ...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html
    Also this thread may help:
    Hard Drive replacement causes new/unknown user password?

  • I have a dell computer with windows xp. i can not download itunes it is looking for itunes.msi and because it can not find it, i can not download itunes 10, and i can not delete itunes from my computer. HELP!!!!!!

    i have a dell computer with windows xp. i can not download itunes it is looking for itunes.msi and because it can not find it, i can not download itunes 10, and i can not delete itunes from my computer. HELP!!!!!!
    What else can I do ?

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • Siri can't look for places in Cyprus and problem with remembering of siblings

    I like to use Siri, but when I ask for a place or address, it answers "Sorry, I can't look for places in Cyprus" !
    Is there anything that I can do so Siri work properly?
    Also, when I tell Siri to remember a sibling, she always ask me who this is! for example, if I ask call my mother, she always asks "what is your mother's name?" I answer and she says "Do you want me to remember that ... is your mother?" and I say YES, so she answer "OK, I will remember that ... is your mother" Every day the same thing! Is there anything that I can do for this too?
    Kindly Advise.

    Hi SophofromGeorgia,
    Welcome to the Apple Support Communities!
    It does not look like these features are available in Georgia yet. Please refer to the following article for feature availability by country.
    Apple - iOS 7 Feature Availability
    http://www.apple.com/ios/feature-availability/
    Have a great day,
    Joe

  • Read Registry Keys and store it in Inventory DB

    Hallo together,
    I am looking for a program to extract some Registry keys into the ZENworks 7 inventory database.
    I know I need to create a CUSTOM.INI and fill it with values. When I create the CUSTOM.INI by hand I got it to work to store the values in the inventory database.
    But I need a program to read the Registry values and store them in the CUSTOM.ini file with the correct syntax.
    A Script or any other small program would be helpful. I know how I could read the Registry values with REG.exe but I do not know how to store the values in the correct syntax in CUSTOM.ini?
    I found zRegScan but I did not get it to work. I found out that the Program is called by the Inventory process (it appears in the TaskManager for a short time). When I run zRegScan by hand (or with a manual launched ZfDInvScanner.exe) I get the following error windows:
    Title: zRegScan.exe - Common Language Runtime Debugging Services
    Warning: Application has generated an exception that could not be handled. Process id=0x814, Thread id=0xf14
    When I click "Cancel" I receive a 2nd Window:
    Title: zRegScan.exe - No debugger found.
    Warning: Registered JIT debugger is not available. An atempt to launch a JIT debugger with ...
    I tried for several hours to get it operational - with no success.
    The zRegScan.log does not show anything helpful.
    I have WinXP SP2 and SP3 machines and ZfD7ir3a.
    Thanks for your help
    Klaus

    BachmannK,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Client Authentication/Authorization via ISE & AD, Posture Registry Key, and mapped to specific DHCP scope by AD membership

    Hi Team,
    I'm currently working on a configuration entailing WLC and ISE where the customer wants a single SSID,and wants his wireless clients to authenticate successfully if they pass a registry key compliance.  Additionally, they want clients to received a different IP address or get mapped to a different DHCP scope based on the Microsoft AD group they belong too. for example:
    Client authenticating with registry key and in AD group ABC that passes authentication gets IP address or subnet for AD group ABC.
    Client authenticating with registry key and in AD group XXX that passes authentication gets IP address or subnet for AD group XXX.
    Clients---->WLC------>ISE-----> MS AD ( groups ABC, XXXX, YYY )
    currently using EAP-PEAP/MSCHAPv2
    Does anyone have any idea or pointers or can refer me somewhere that I can read on how to accomplish this?  Not sure on how to do the registry compliance check nor what attributes will allow me to map the client to a DHCP Scope based on this AD group membership? 
    Thanks...

    Do check cisco how to guides you will get step by step configuration of the current requirement
     

  • Take ownership of a registry key, and change permissions

    Hello,
    I am writing a powershell script to configure a W2008-R2 Server. In one of the steps, I need to take ownership of an existing registry key, and then give full control permissions to the administrators.
    I have done this:
    $acl = Get-Acl $key
    $me = [System.Security.Principal.NTAccount]"$env:userdomain\$env:username"
    $acl.SetOwner($me)
    $person = [System.Security.Principal.NTAccount]"Administrators"
    $access = [System.Security.AccessControl.RegistryRights]"FullControl"
    $inheritance = [System.Security.AccessControl.InheritanceFlags]"None"
    $propagation = [System.Security.AccessControl.PropagationFlags]"None"
    $type = [System.Security.AccessControl.AccessControlType]"Allow"
    $rule = New-Object System.Security.AccessControl.RegistryAccessRule($person,$access,$inheritance,$propagation,$type)
    $acl.AddAccessRule($rule)
    Set-Acl $key $acl
    But it fails in "set-acl" command, with the message "Set-Acl : Requested registry access is not allowed."
    Any ideas of how to do this? or if it is even possible?
    Thank you!

    Here is the code to take ownership of a registry key.  You first need to set the SeTakeOwnership permission on your process
    The enable-privilege function is taken from a posting by Lee Holmes (http://www.leeholmes.com/blog/2010/09/24/adjusting-token-privileges-in-powershell/), but
    I've been meaning to get around to tidy it up a bit for my purposes.  Perhaps this thread is the motivation I need to do this.  I should also note that the PowerShell Community Extensions has cmdlets to work with tokens already.  
    I also never tested whether you can do the PowerShell native methods of get-acl set-acl if you set the token.  I don't have time to play with that now, but if you want to try it and let us know if it works that would be great.  The opensubkey method
    I'm using I've documented here for changing permissions when you don't have permissions: http://powertoe.wordpress.com/2010/08/28/controlling-registry-acl-permissions-with-powershell/
    function enable-privilege {
    param(
    ## The privilege to adjust. This set is taken from
    ## http://msdn.microsoft.com/en-us/library/bb530716(VS.85).aspx
    [ValidateSet(
    "SeAssignPrimaryTokenPrivilege", "SeAuditPrivilege", "SeBackupPrivilege",
    "SeChangeNotifyPrivilege", "SeCreateGlobalPrivilege", "SeCreatePagefilePrivilege",
    "SeCreatePermanentPrivilege", "SeCreateSymbolicLinkPrivilege", "SeCreateTokenPrivilege",
    "SeDebugPrivilege", "SeEnableDelegationPrivilege", "SeImpersonatePrivilege", "SeIncreaseBasePriorityPrivilege",
    "SeIncreaseQuotaPrivilege", "SeIncreaseWorkingSetPrivilege", "SeLoadDriverPrivilege",
    "SeLockMemoryPrivilege", "SeMachineAccountPrivilege", "SeManageVolumePrivilege",
    "SeProfileSingleProcessPrivilege", "SeRelabelPrivilege", "SeRemoteShutdownPrivilege",
    "SeRestorePrivilege", "SeSecurityPrivilege", "SeShutdownPrivilege", "SeSyncAgentPrivilege",
    "SeSystemEnvironmentPrivilege", "SeSystemProfilePrivilege", "SeSystemtimePrivilege",
    "SeTakeOwnershipPrivilege", "SeTcbPrivilege", "SeTimeZonePrivilege", "SeTrustedCredManAccessPrivilege",
    "SeUndockPrivilege", "SeUnsolicitedInputPrivilege")]
    $Privilege,
    ## The process on which to adjust the privilege. Defaults to the current process.
    $ProcessId = $pid,
    ## Switch to disable the privilege, rather than enable it.
    [Switch] $Disable
    ## Taken from P/Invoke.NET with minor adjustments.
    $definition = @'
    using System;
    using System.Runtime.InteropServices;
    public class AdjPriv
    [DllImport("advapi32.dll", ExactSpelling = true, SetLastError = true)]
    internal static extern bool AdjustTokenPrivileges(IntPtr htok, bool disall,
    ref TokPriv1Luid newst, int len, IntPtr prev, IntPtr relen);
    [DllImport("advapi32.dll", ExactSpelling = true, SetLastError = true)]
    internal static extern bool OpenProcessToken(IntPtr h, int acc, ref IntPtr phtok);
    [DllImport("advapi32.dll", SetLastError = true)]
    internal static extern bool LookupPrivilegeValue(string host, string name, ref long pluid);
    [StructLayout(LayoutKind.Sequential, Pack = 1)]
    internal struct TokPriv1Luid
    public int Count;
    public long Luid;
    public int Attr;
    internal const int SE_PRIVILEGE_ENABLED = 0x00000002;
    internal const int SE_PRIVILEGE_DISABLED = 0x00000000;
    internal const int TOKEN_QUERY = 0x00000008;
    internal const int TOKEN_ADJUST_PRIVILEGES = 0x00000020;
    public static bool EnablePrivilege(long processHandle, string privilege, bool disable)
    bool retVal;
    TokPriv1Luid tp;
    IntPtr hproc = new IntPtr(processHandle);
    IntPtr htok = IntPtr.Zero;
    retVal = OpenProcessToken(hproc, TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, ref htok);
    tp.Count = 1;
    tp.Luid = 0;
    if(disable)
    tp.Attr = SE_PRIVILEGE_DISABLED;
    else
    tp.Attr = SE_PRIVILEGE_ENABLED;
    retVal = LookupPrivilegeValue(null, privilege, ref tp.Luid);
    retVal = AdjustTokenPrivileges(htok, false, ref tp, 0, IntPtr.Zero, IntPtr.Zero);
    return retVal;
    $processHandle = (Get-Process -id $ProcessId).Handle
    $type = Add-Type $definition -PassThru
    $type[0]::EnablePrivilege($processHandle, $Privilege, $Disable)
    enable-privilege SeTakeOwnershipPrivilege
    $key = [Microsoft.Win32.Registry]::LocalMachine.OpenSubKey("SOFTWARE\powertoe",[Microsoft.Win32.RegistryKeyPermissionCheck]::ReadWriteSubTree,[System.Security.AccessControl.RegistryRights]::takeownership)
    $acl = $key.GetAccessControl()
    $me = [System.Security.Principal.NTAccount]"t-alien\tome"
    $acl.SetOwner($me)
    $key.SetAccessControl($acl)
    http://twitter.com/toenuff
    write-host ((0..56)|%{if (($_+1)%3 -eq 0){[char][int]("116111101110117102102064103109097105108046099111109"[($_-2)..$_] -join "")}}) -separator ""

  • What is the best program for designing event flyers? I am looking for something basic and simple.

    What is the best program for designing event flyers? I am looking for something basic and simple.

    Poor old Photoshop® is forever being put down when it comes to layout work, but it is perfectly capable, and can output a high quality print PDF the printer will be perfectly happy with.  OK you don't have the text flow between columns bells and whistles of InDesign and [spit] Publisher, but if you have a $10/month Photoshop/Lightroom subscription, instead of the $50/month full subscription, don't think you can't do a perfectly good flyer or poster.
    https://helpx.adobe.com/photoshop/how-to/align-objects-guides.html

  • I am looking for an boolean and numeric expression evaluator. I want to be able to compare ( ,=, , or, not, and, nand, etc)and evaluate boolean/numeric expression.

    I am looking for an boolean and numeric expression evaluator. I want to be able to compare (>,=, <, or, not, and, nand, etc)and evaluate boolean/numeric expression. Does anyone know if there is any code samples anywhere. If anyone has any input, I would greately appreciate it.

    The problem is that I have to enter a string of that type (any random string), and the program should go and calculate the result for the whole stirng, by looking at which parts to calculate first (figuring out precedence), second, etc. This is like a calculator, you don't know what the user is going to enter next, so I can't just use the boolean palatte. I could use it if the equation was always of the form "a 'operator' b", where the operator is any logic or comparison operator. But that is not what I am trying to accomplish.
    Can you do logic in the formula node? I think it only allows numeric values for inputs and outputs, it doesn't let you enter in and output booleans and stuff..does it?
    Thanks,
    Yuliya

  • Looking for MI Developers and Architects

    Established company in Orange County (California) is currently looking for experienced developers and architects in SAP Netweaver Mobile. Competitive slaries, plus bonuses, we will also sponsor visas to work in the US . Please email resumes if interested to:
    anton at rapidconsultingusa.com

    You can also try posting to the Flex Jobs mailing list, if
    you haven't already:
    http://tech.groups.yahoo.com/group/flexjobs/
    hth,
    matt horn
    flex docs

  • How do we change de location where iMovie looks for its projets and event ?

    Would you know how to change de location where iMovie looks for its projets and events ?
    I want to put those on an external disk.

    You must do this within iMovie.
    In iMovie, click VIEW/GROUP EVENTS BY DISK
    This will show all properly formatted external disks (must by HFS+ journalled, not FAT32)
    Now you can drag your Events to the disk by dragging and dropping the Event Name to the icon of the disk in the Event Source List in iMovie.
    You can also move projects. See iMovie Help for details.

  • [svn:bz-trunk] 9838: Bug: BLZ-416  - Can bypass checks for which channel and protocol a destination can be called over by using NetConnection instead of BlazeDS messaging .

    Revision: 9838
    Author:   [email protected]
    Date:     2009-08-31 11:27:50 -0700 (Mon, 31 Aug 2009)
    Log Message:
    Bug: BLZ-416  - Can bypass checks for which channel and protocol a destination can be called over by using NetConnection instead of BlazeDS messaging.
    QA: Yes
    Doc: Yes - note the new enforce-endpoint-validation setting.
    Details: Added the following config setting:
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-416
    Modified Paths:
        blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
        blazeds/trunk/modules/core/src/flex/messaging/MessageBroker.java
        blazeds/trunk/modules/core/src/flex/messaging/config/MessagingConfiguration.java
        blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java
        blazeds/trunk/modules/core/src/flex/messaging/config/SystemSettings.java

  • My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

    If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
    Do this to transfer info
    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

  • No inspection lot can be opened for this material and vendor -QA228

    Hi every one !
    Iam  getting  Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
    we analyze the issue asfollow -
    1.checked Quality Lot-Available
    2.Quality info record- Availble
    3. Quality plan is exist.
    But stil throwing  above Error.

    Hi,
    Check the below threads,
    [No inspection lot can be opened for this material and vendor;
    [No inspection lot can be opened for this material and vendor;

  • I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    I want to set up 5 different ipods to sync from one library, but want to be able to control what is synced to each ipod and have it remember that for future synching and just look for new songs and not sync all the other music in the library

    Click here for options.
    (58961)

Maybe you are looking for