Cancel a line after buddy upgrade
I'm part of a family plan and used a buddy upgrade a couple years ago, and that line is a few months away from being able to upgrade. Because I used someone else's upgrade, they used mine recently, so "my" contract is until 2014 now. Will I be able to cancel my line when the other person's upgrade is available without paying an ETF?
Hi andreec95, It would be break my heart to see you go! May I ask why you are considering ending your service? I can confirm as the other users stated that the contract is specific for each line. If an upgrade is alternated, the original line eligible for the upgrade is responsible for the contract. I hope we can restore you confidence in us and help keep you as a customer!
Thank You,
YaleK_VZW
Follwo us on Twitter @VZWsupport
Similar Messages
-
I would just like my blog to return to its original format with no line down the middle of the page and the top border going across the entire page not just halfway. This happened immediately after I upgraded to Firefox 6. My blog's format is normal on other computers but not normal on my computer. Thank you.
Can you attach a screenshot and maybe post a link?
*http://en.wikipedia.org/wiki/Screenshot
Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).
Reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a (too) high value can cause issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text. -
After Firefox upgrade just a few minutes ago, Windows 7 no longer allows hyperlinks in e-mails (Outlook 2003) to connect. Message is "This operations has been cancelled due to restrictions in your computer. Please contact your system administrator."
I use Windows 7 x64 with Office 2010 and the message I get is General Failure. the URL was:..... An error occured in sending the command to the application.
This only started happening after the 3.6.14 update. -
Since upgrading to Lion when I attempt to download a service like Skype online it cancels my download after 15 minutes of loading. How do I fix this?
Have you got age restrictions set in Settings > General > Restrictions so that the app is being hidden when it's downloaded ?
-
Error in SM59 TCP/IP connection after kernel upgrade to 215..
Hi
We recently upgraded our kernel to patch 215(NW 7.0)..
We built the kernel by first taking the entire kernel stack( level 201) and then patched it with dw, enserver, lib_dbsl, tp, r3trans, r3inlpgm, saposcol with level = 215 except for lib_dbsl, which is 214 and enserver which is 207...
After the upgrade to this new level, we have a SM59 TCP/IP connection which calls an RPG program located in /qsys.lib/..(start on application server radio option), which has stopped working...
Now this RFC doesn't work anymore...
When we test it, it shows us the following:
Logon Cancel
Error Details timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details ERROR: timeout during allocate
Error Details LOCATION: SAP-Gateway on host sapdev.ny..... / sapgw00
Error Details DETAIL: no connect of TP /qsys.lib/rtcimo.lib/RFC000.pgm from host sapdev.ny.....
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 1537
Error Details MODULE: gwr3cpic.c
Error Details LINE: 6255
Error Details RETURN CODE: 242
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Aug 18 23:09:46 2009
Error Details VERSION: 2
We have another system in which tp is at patch 169 and it works fine...
Looks like something changed with the kernel/tp patch...
doesn't show anything in the sm21 log..in the work process log for dev_rd..
MtxInit: -2 0 0
Mon Aug 17 16:00:47 2009
GwDpInit: attached to gw_adm at 70000008059bae0
DpSetProcessPriority: Run priority for gwrd adjusted to 12
Tue Aug 18 14:35:09 2009
ERROR => GwISearchPartner: timeout, partner LU: >%%SAPGUI%%<, TP: >saphttp< [gwr3cpic.c 6212]
ERROR => GwISearchPartner: HOST: %%SAPGUI%%, conv ID: 22575469 [gwr3cpic.c 6225]
Tue Aug 18 17:25:25 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c 6212]
ERROR => GwISearchPartner: HOST: sapdev.ny....., conv ID: 32824524 [gwr3cpic.c 6225]
Tue Aug 18 17:29:30 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c 6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33074744 [gwr3cpic.c 6225]
Tue Aug 18 17:40:29 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c 6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33722803 [gwr3cpic.c 6225]
Tue Aug 18 22:52:39 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c 6212]
Tue Aug 18 22:52:40 2009
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 52504488 [gwr3cpic.c 6225]
Tue Aug 18 23:09:46 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c 6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 53534925 [gwr3cpic.c 6225]
Has anyone seen anything like this??
Please let us know..
Thanks
sap ques...
Edited by: sap ques on Aug 19, 2009 5:23 AM
Edited by: sap ques on Aug 19, 2009 5:25 AMThis error may be due to kernel patch level. You can try some other patch level. If you can raise an OSS message with SAP, they can tell you exactly which Kernel patch will solve your problem.
-
After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recordings
After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.
HI,
In Message Menu > Preference > Accounts you should at least have the iMessage Account (Which is Enabled) and th Bonjour one that most likely is not.
After that if you had iChat type AIM valid Screen Names or Jabber IDs in an earlier OS then the System Preferences > Mail, Contacts and Calendars should list them and have them set to be used with Messages.
There is a vague chance that you have not set these up yet (you can do it in Messages or Mail, Contacts and Calendars)
Once you have a t least one other "Account" other than th iMessage one in Messages then the Buddy List option will appear next to CMD and 1 in the Window menu list.
NEXT
If you go to the General Section of the Messages Preferences you can unlink several Buddy lists if you have them (By default they are shown as one gathered Buddy list)
I Have several Accounts logged in (AIM valid and Jabber ones)
Uploaded with Skitch!
And I separate them in to individual lists which then gives me this in the Window Menu
Uploaded with Skitch!
8:06 PM Thursday; August 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Three line family plan. How do I cancel the line that's about to complete its two-year contract?
My phone is the primary line for a three-line family plan I share with my wife and brother. My two years is up this month, my wife's two years is up next month, and my brother's is up the month after that. As each contract expires, we want to cancel the family plan and switch over to month-to-month plans. One caveat: I'm abroad right now, so I simply want my service to lapse completely until I return in six months, and I'll worry about my phone then. How do I cancel my line when my contract expires this month? How do I switch my wife and brother's accounts over to month-to-month as their contracts expire?
Hi, I was just looking into similar circumstances but I want to keep my daughter's line and only suspend mine. My question is that if I suspend my phone can I still upgrade my daughter's line? I was laid off and if I don't find another job then I want to cancel my phone but keep her phone active. Her last phone the screen shattered so I want to renew her contract to get a new phone. I am thinking of going thru the edge plan since it seems the price with the discount works out to be the same if I go that way instead of paying the full discounted price outright. Can I upgrade her phone without renewing the contract on my phone?
Thank you so much!! -
One line out of contract, can I cancel another line under contract without ETF?
I've seen many people asking this question, but the answer was different from what I heard from the chat with CSR.
So, does this idea work?
I have three lines on my account.
A - Upgrade available in 10/2012 (contract ends on similar date)
B - Upgrade available in 10/2013 (contract ends on similar date)
C - Upgrade available as of now (contract ended)
Basically, I have one line that's out of contract.
Since I have one line that's done with the contract, can I cancel one line even though it's still under contract from my account?
I thought this wasn't allowed, but in my recent chat with CSR named Cassey(she said she left notation about our conversation), she said it is possible and was so sure about that.
I was in the exact same situation back in March when I cancelled 4th line I used to have in my account.
I was told it couldn't be done that way and had to wait for a couple month with the charges.
Please clear this up so that I could take an appropriate action.hwangong wrote:
So, is the answer "no"?
I can't cancel a line as long as it's under contract even though I have another line that's out of contract? Correct - the contract, or agreement is to keep a line of service active for 24 months after the upgrade (or purchase of a subsidized/discounted phone). If the 24 months is not up, and you cancel that line, there will be an ETF based on the # of months out of the 24 that were fulfilled.
Then, I really wish there is a way I can talk to the rep I chatted.
I triple checked with her, she said I could do that, and she was so sure about it. Maybe she misunderstood the question?? Though it seems pretty clear to me what you are asking, and it's just as clear it's not the way it works! The contract is on the line of service, and tied to that phone number. -
[SOLVED]Problem with logging in after system upgrade
Hi,
I'm encountering some problem after rebooting my machine just after last upgrade. Few minutes ago I was sure I found the source of the problem when system hang on "Reached target Graphical Interface" message. Reason - nvidia drivers had to be replaced with legacy version (https://www.archlinux.org/news/nvidia-340xx-and-nvidia/). But it didn't help. Also it made things a little bit worse. Because now my system uses nvidia-340xx and it seems drivers are fine but when login screen of lightdm should appear screens stay blank... and nothing happens. I simply can't do anything.
What I noticed is also xfce4-session was upgraded (4.10.1.3->4.10.1-5) and maybe this is the separate problem? but I can't downgrade this package as some time ago I removed all contents of /var/cache/pacman/pkg.
What I have is arch on pendrive so I can chroot into existing system.
Any ideas?
Last edited by jakub (2014-10-08 22:09:02)I found something similar to line
(EE) Mar 07 14:05:07 NVIDIA(0): WAIT: (E, 0, 0x837d, 0)
these values are not exact as I'm too tired now to rewrite the real ones from screen
maybe I should install some older nvidia drivers (these 340xx are broken somehow I think). Unfortunately I don't have my /pkg content anymore.
Where can I download packages like nvidia-340.32-1-x86_64.pkg.tar.xz from? (according to pacman.log I had this version back in July and it was working fine I think).
I could also start X with Nouveau drivers but not xfce (anyway I would like to install old nvidia drivers back)
Last edited by jakub (2014-10-08 22:03:11) -
Gtk messed up after latest upgrade
After latest upgrades it seems that anything gtk-related (2 or 3) is drawn as garbage, see image on http://i.imgur.com/g57D0KS.jpg
Tiled-qt on the left looks fine, however, as does chromium.
Xorg.log here:
[ 13.396]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 13.396] X Protocol Version 11, Revision 0
[ 13.396] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 13.396] Current Operating System: Linux laite-arch 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 13.396] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ea8eee16-3368-4aea-baf2-63f8483fc7b2 ro quiet
[ 13.396] Build Date: 01 July 2013 10:48:42AM
[ 13.396]
[ 13.396] Current version of pixman: 0.30.0
[ 13.396] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.396] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.396] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 26 17:41:33 2013
[ 13.538] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.538] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.812] (==) No Layout section. Using the first Screen section.
[ 13.812] (==) No screen section available. Using defaults.
[ 13.812] (**) |-->Screen "Default Screen Section" (0)
[ 13.813] (**) | |-->Monitor "<default monitor>"
[ 13.813] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.813] (==) Automatically adding devices
[ 13.813] (==) Automatically enabling devices
[ 13.813] (==) Automatically adding GPU devices
[ 14.042] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.261] Entry deleted from font path.
[ 14.495] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14.495] Entry deleted from font path.
[ 14.495] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14.495] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14.495] Entry deleted from font path.
[ 14.495] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14.495] (**) FontPath set to:
/usr/share/fonts/local,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 14.495] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.495] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.509] (II) Loader magic: 0x7fdc20
[ 14.509] (II) Module ABI versions:
[ 14.509] X.Org ANSI C Emulation: 0.4
[ 14.509] X.Org Video Driver: 14.1
[ 14.509] X.Org XInput driver : 19.1
[ 14.509] X.Org Server Extension : 7.0
[ 14.510] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.513] (--) PCI:*(0:2:0:0) 1002:94b3:174b:1170 rev 0, Mem @ 0xd0000000/268435456, 0xfbfe0000/65536, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 14.513] Initializing built-in extension Generic Event Extension
[ 14.513] Initializing built-in extension SHAPE
[ 14.513] Initializing built-in extension MIT-SHM
[ 14.513] Initializing built-in extension XInputExtension
[ 14.513] Initializing built-in extension XTEST
[ 14.513] Initializing built-in extension BIG-REQUESTS
[ 14.513] Initializing built-in extension SYNC
[ 14.513] Initializing built-in extension XKEYBOARD
[ 14.513] Initializing built-in extension XC-MISC
[ 14.513] Initializing built-in extension SECURITY
[ 14.513] Initializing built-in extension XINERAMA
[ 14.513] Initializing built-in extension XFIXES
[ 14.513] Initializing built-in extension RENDER
[ 14.513] Initializing built-in extension RANDR
[ 14.513] Initializing built-in extension COMPOSITE
[ 14.513] Initializing built-in extension DAMAGE
[ 14.513] Initializing built-in extension MIT-SCREEN-SAVER
[ 14.513] Initializing built-in extension DOUBLE-BUFFER
[ 14.513] Initializing built-in extension RECORD
[ 14.513] Initializing built-in extension DPMS
[ 14.514] Initializing built-in extension X-Resource
[ 14.514] Initializing built-in extension XVideo
[ 14.514] Initializing built-in extension XVideo-MotionCompensation
[ 14.514] Initializing built-in extension XFree86-VidModeExtension
[ 14.514] Initializing built-in extension XFree86-DGA
[ 14.514] Initializing built-in extension XFree86-DRI
[ 14.514] Initializing built-in extension DRI2
[ 14.514] (II) "glx" will be loaded by default.
[ 14.514] (II) LoadModule: "dri2"
[ 14.514] (II) Module "dri2" already built-in
[ 14.514] (II) LoadModule: "glamoregl"
[ 14.724] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 16.917] (II) Module glamoregl: vendor="X.Org Foundation"
[ 16.917] compiled for 1.14.0, module version = 0.5.0
[ 16.917] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.917] (II) LoadModule: "glx"
[ 16.917] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.116] (II) Module glx: vendor="X.Org Foundation"
[ 17.116] compiled for 1.14.2, module version = 1.0.0
[ 17.116] ABI class: X.Org Server Extension, version 7.0
[ 17.116] (==) AIGLX enabled
[ 17.117] Loading extension GLX
[ 17.117] (==) Matched ati as autoconfigured driver 0
[ 17.117] (==) Matched ati as autoconfigured driver 1
[ 17.117] (==) Matched vesa as autoconfigured driver 2
[ 17.117] (==) Matched modesetting as autoconfigured driver 3
[ 17.117] (==) Matched fbdev as autoconfigured driver 4
[ 17.117] (==) Assigned the driver to the xf86ConfigLayout
[ 17.117] (II) LoadModule: "ati"
[ 17.117] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 17.162] (II) Module ati: vendor="X.Org Foundation"
[ 17.162] compiled for 1.14.0, module version = 7.1.0
[ 17.162] Module class: X.Org Video Driver
[ 17.162] ABI class: X.Org Video Driver, version 14.1
[ 17.162] (II) LoadModule: "radeon"
[ 17.162] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 17.266] (II) Module radeon: vendor="X.Org Foundation"
[ 17.266] compiled for 1.14.0, module version = 7.1.0
[ 17.266] Module class: X.Org Video Driver
[ 17.266] ABI class: X.Org Video Driver, version 14.1
[ 17.266] (II) LoadModule: "vesa"
[ 17.281] (WW) Warning, couldn't open module vesa
[ 17.281] (II) UnloadModule: "vesa"
[ 17.281] (II) Unloading vesa
[ 17.281] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.281] (II) LoadModule: "modesetting"
[ 17.281] (WW) Warning, couldn't open module modesetting
[ 17.281] (II) UnloadModule: "modesetting"
[ 17.281] (II) Unloading modesetting
[ 17.281] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 17.281] (II) LoadModule: "fbdev"
[ 17.282] (WW) Warning, couldn't open module fbdev
[ 17.282] (II) UnloadModule: "fbdev"
[ 17.282] (II) Unloading fbdev
[ 17.282] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.282] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
[ 17.292] (++) using VT number 7
[ 17.307] (II) [KMS] Kernel modesetting enabled.
[ 17.307] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.307] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 17.307] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 17.307] (==) RADEON(0): Default visual is TrueColor
[ 17.307] (==) RADEON(0): RGB weight 888
[ 17.307] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 17.307] (--) RADEON(0): Chipset: "ATI Radeon HD 4770" (ChipID = 0x94b3)
[ 17.307] (II) Loading sub module "dri2"
[ 17.307] (II) LoadModule: "dri2"
[ 17.307] (II) Module "dri2" already built-in
[ 17.307] (II) Loading sub module "exa"
[ 17.307] (II) LoadModule: "exa"
[ 17.308] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 17.350] (II) Module exa: vendor="X.Org Foundation"
[ 17.350] compiled for 1.14.2, module version = 2.6.0
[ 17.350] ABI class: X.Org Video Driver, version 14.1
[ 17.350] (II) RADEON(0): KMS Color Tiling: enabled
[ 17.350] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 17.350] (II) RADEON(0): KMS Pageflipping: enabled
[ 17.350] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 17.370] (II) RADEON(0): Output DVI-0 has no monitor section
[ 17.390] (II) RADEON(0): Output DIN has no monitor section
[ 17.421] (II) RADEON(0): Output DVI-1 has no monitor section
[ 17.440] (II) RADEON(0): EDID for output DVI-0
[ 17.460] (II) RADEON(0): EDID for output DIN
[ 17.491] (II) RADEON(0): EDID for output DVI-1
[ 17.491] (II) RADEON(0): Manufacturer: BNQ Model: 7841 Serial#: 21573
[ 17.491] (II) RADEON(0): Year: 2009 Week: 38
[ 17.491] (II) RADEON(0): EDID Version: 1.3
[ 17.491] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 17.491] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 17.491] (II) RADEON(0): Max Image Size [cm]: horiz.: 53 vert.: 29
[ 17.491] (II) RADEON(0): Gamma: 2.20
[ 17.491] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 17.491] (II) RADEON(0): Default color space is primary color space
[ 17.491] (II) RADEON(0): First detailed timing is preferred mode
[ 17.491] (II) RADEON(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 17.491] (II) RADEON(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 17.491] (II) RADEON(0): Supported established timings:
[ 17.491] (II) RADEON(0): 720x400@70Hz
[ 17.491] (II) RADEON(0): 640x480@60Hz
[ 17.491] (II) RADEON(0): 640x480@75Hz
[ 17.491] (II) RADEON(0): 800x600@60Hz
[ 17.491] (II) RADEON(0): 800x600@75Hz
[ 17.491] (II) RADEON(0): 832x624@75Hz
[ 17.491] (II) RADEON(0): 1024x768@60Hz
[ 17.491] (II) RADEON(0): 1024x768@75Hz
[ 17.491] (II) RADEON(0): 1280x1024@75Hz
[ 17.491] (II) RADEON(0): 1152x864@75Hz
[ 17.491] (II) RADEON(0): Manufacturer's mask: 0
[ 17.491] (II) RADEON(0): Supported standard timings:
[ 17.491] (II) RADEON(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
[ 17.491] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 17.491] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 17.491] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 17.491] (II) RADEON(0): #4: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 17.491] (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 17.491] (II) RADEON(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 17.491] (II) RADEON(0): Supported detailed timing:
[ 17.491] (II) RADEON(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 17.491] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 17.491] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 17.491] (II) RADEON(0): Serial No: F9904610SL000
[ 17.491] (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 17.491] (II) RADEON(0): Monitor name: BenQ G2420HDB
[ 17.491] (II) RADEON(0): EDID (in hex):
[ 17.491] (II) RADEON(0): 00ffffffffffff0009d1417845540000
[ 17.491] (II) RADEON(0): 261301030e351d782e6085a6564a9c25
[ 17.491] (II) RADEON(0): 125054a56b80710081c081408180a9c0
[ 17.491] (II) RADEON(0): b300d1c00101023a801871382d40582c
[ 17.491] (II) RADEON(0): 4500dd0c1100001e000000ff00463939
[ 17.491] (II) RADEON(0): 3034363130534c303030000000fd0032
[ 17.491] (II) RADEON(0): 4c185311000a202020202020000000fc
[ 17.491] (II) RADEON(0): 0042656e512047323432304844420076
[ 17.491] (II) RADEON(0): Printing probed modes for output DVI-1
[ 17.491] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17.491] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 17.492] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 17.492] (II) RADEON(0): Modeline "1152x720"x60.0 67.28 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 17.492] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17.492] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17.492] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17.492] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17.492] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17.492] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.492] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17.492] (II) RADEON(0): Output DVI-0 disconnected
[ 17.492] (II) RADEON(0): Output DIN disconnected
[ 17.492] (II) RADEON(0): Output DVI-1 connected
[ 17.492] (II) RADEON(0): Using exact sizes for initial modes
[ 17.492] (II) RADEON(0): Output DVI-1 using initial mode 1920x1080
[ 17.492] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 17.492] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:20000000 visible:1f7d7000
[ 17.492] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 17.492] (==) RADEON(0): DPI set to (96, 96)
[ 17.492] (II) Loading sub module "fb"
[ 17.492] (II) LoadModule: "fb"
[ 17.492] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.567] (II) Module fb: vendor="X.Org Foundation"
[ 17.567] compiled for 1.14.2, module version = 1.0.0
[ 17.567] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.567] (II) Loading sub module "ramdac"
[ 17.567] (II) LoadModule: "ramdac"
[ 17.567] (II) Module "ramdac" already built-in
[ 17.567] (--) Depth 24 pixmap format is 32 bpp
[ 17.568] (II) RADEON(0): [DRI2] Setup complete
[ 17.568] (II) RADEON(0): [DRI2] DRI driver: r600
[ 17.568] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 17.568] (II) RADEON(0): Front buffer size: 8160K
[ 17.568] (II) RADEON(0): VRAM usage limit set to 456966K
[ 17.569] (==) RADEON(0): Backing store disabled
[ 17.569] (II) RADEON(0): Direct rendering enabled
[ 17.569] (II) EXA(0): Driver allocated offscreen pixmaps
[ 17.569] (II) EXA(0): Driver registered support for the following operations:
[ 17.569] (II) Solid
[ 17.570] (II) Copy
[ 17.570] (II) Composite (RENDER acceleration)
[ 17.570] (II) UploadToScreen
[ 17.570] (II) DownloadFromScreen
[ 17.570] (II) RADEON(0): Acceleration enabled
[ 17.570] (==) RADEON(0): DPMS enabled
[ 17.570] (==) RADEON(0): Silken mouse enabled
[ 17.570] (II) RADEON(0): Set up textured video
[ 17.570] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 17.570] (II) RADEON(0): [XvMC] Extension initialized.
[ 17.570] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17.571] (--) RandR disabled
[ 20.549] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.549] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.549] (II) AIGLX: enabled GLX_ARB_create_context
[ 20.549] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 20.549] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 20.549] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.549] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.552] (II) AIGLX: Loaded and initialized r600
[ 20.552] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.553] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 21.889] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 21.889] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.889] (II) LoadModule: "evdev"
[ 21.890] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.925] (II) Module evdev: vendor="X.Org Foundation"
[ 21.925] compiled for 1.14.2, module version = 2.8.1
[ 21.925] Module class: X.Org XInput Driver
[ 21.925] ABI class: X.Org XInput driver, version 19.1
[ 21.925] (II) Using input driver 'evdev' for 'Power Button'
[ 21.925] (**) Power Button: always reports core events
[ 21.925] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 21.925] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.925] (--) evdev: Power Button: Found keys
[ 21.925] (II) evdev: Power Button: Configuring as keyboard
[ 21.925] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 21.925] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.925] (**) Option "xkb_rules" "evdev"
[ 21.925] (**) Option "xkb_model" "pc104"
[ 21.925] (**) Option "xkb_layout" "fi"
[ 21.925] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.026] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 22.027] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.027] (II) Using input driver 'evdev' for 'Power Button'
[ 22.027] (**) Power Button: always reports core events
[ 22.027] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 22.027] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.027] (--) evdev: Power Button: Found keys
[ 22.027] (II) evdev: Power Button: Configuring as keyboard
[ 22.027] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 22.027] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 22.027] (**) Option "xkb_rules" "evdev"
[ 22.027] (**) Option "xkb_model" "pc104"
[ 22.027] (**) Option "xkb_layout" "fi"
[ 22.027] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.028] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event1)
[ 22.028] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 22.028] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 22.028] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 22.028] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event1"
[ 22.028] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Vendor 0x45e Product 0x745
[ 22.028] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 22.028] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 22.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/input/input1/event1"
[ 22.029] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 8)
[ 22.029] (**) Option "xkb_rules" "evdev"
[ 22.029] (**) Option "xkb_model" "pc104"
[ 22.029] (**) Option "xkb_layout" "fi"
[ 22.029] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.030] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event2)
[ 22.030] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev pointer catchall"
[ 22.030] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 22.030] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 22.030] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 22.030] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event2"
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Vendor 0x45e Product 0x745
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 9 mouse buttons
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y relative axes
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Forcing absolute x/y axes to exist.
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Adding scrollwheel support
[ 22.031] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 22.031] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.1/input/input2/event2"
[ 22.031] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 9)
[ 22.031] (**) Option "xkb_rules" "evdev"
[ 22.031] (**) Option "xkb_model" "pc104"
[ 22.031] (**) Option "xkb_layout" "fi"
[ 22.031] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.031] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for relative axes.
[ 22.031] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: ignoring absolute axes.
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 22.033] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/mouse1)
[ 22.033] (II) No input driver specified, ignoring this device.
[ 22.033] (II) This device may have been added with another device file.
[ 22.033] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event3)
[ 22.033] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 22.033] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 22.033] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 22.033] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event3"
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Using mtdev for this device
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Vendor 0x45e Product 0x745
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 1 mouse buttons
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute multitouch axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y absolute axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Forcing relative x/y axes to exist.
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Adding scrollwheel support
[ 22.033] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 22.033] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.2/input/input3/event3"
[ 22.033] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 10)
[ 22.033] (**) Option "xkb_rules" "evdev"
[ 22.033] (**) Option "xkb_model" "pc104"
[ 22.033] (**) Option "xkb_layout" "fi"
[ 22.033] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.034] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for relative axes.
[ 22.034] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: ignoring absolute axes.
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 22.034] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/js0)
[ 22.034] (II) No input driver specified, ignoring this device.
[ 22.034] (II) This device may have been added with another device file.
[ 22.034] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 22.034] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 22.034] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 22.034] (**) Logitech USB Receiver: always reports core events
[ 22.034] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 22.034] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
[ 22.034] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 22.034] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 22.034] (--) evdev: Logitech USB Receiver: Found relative axes
[ 22.034] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 22.034] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 22.034] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 22.034] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 22.034] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.034] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input0/event0"
[ 22.034] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 22.034] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 22.034] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 22.034] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 22.034] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 22.034] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 22.035] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event7)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event8)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 22.035] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 30.896] (II) AIGLX: Suspending AIGLX clients for VT switch
I'm using open drivers for my Radeon HD4770.
Same problem persists with all gtk themes.
Last edited by laite (2013-07-26 16:28:49)I have the same problem too. the same graphic card model.
I temporarily change the driver to 'vesa' or 'fbdev' to make it render right.
but it may cause the resolution smaller.
any suggestion ?
pacman -Qi linux
Name : linux
Version : 3.10.2-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.10.2
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
[installed]
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 66453.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Mon Jul 22 14:52:41 2013
Install Date : Fri Jul 26 00:23:13 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
pacman -Qi pango
Name : pango
Version : 1.34.1-1
Description : A library for layout and rendering of text
Architecture : x86_64
URL : http://www.pango.org/
Licenses : LGPL
Groups : None
Provides : None
Depends On : libthai cairo libxft harfbuzz
Optional Deps : None
Required By : cogl gst-plugins-base gstreamer0.10-base-plugins gtk2 gtk3
librsvg libtiger pangomm
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 3682.00 KiB
Packager : Jan Alexander Steffens (heftig) <[email protected]>
Build Date : Tue May 14 01:42:00 2013
Install Date : Fri Jul 26 01:08:47 2013
Install Reason : Installed as a dependency for another package
Install Script : Yes
Validated By : Signature
Last edited by Ashur (2013-07-26 17:48:58) -
After upgrading my IMac to Mountain Lion, Time Machine keeps backing up large amounts of data (50 to 60 GB at at time}. I have not imputed that kind of data into the Mac since I have lttle use for it for the moment. My back up disc is a Time Capsule. Help!
OK, I will hold for a couple of days see what happens. First back up after the upgrade was 10 gb. the second one is in progress and is backink up 59.8 gb.
No data inputs have occured since the last back up before the upgrade and usually I only do small tasks such as family photos, email and ocassionaly on line shopping such as a few songs from ITunes.
Thanks I'll keep you informed. -
LWAP issues with a 5508 controller after AP upgrade
Hi All, I’m having a few problems after upgrading my AP to a LWAP and hope you can help.
I have an AIR-AP1242AG-E-K9 which had c1240-k9w8-mx.124-21a.JA loaded, I followed the link below and upgraded with Cisco’s upgrade tool to c1240-rcvk9w8-mx with no problems at all, after the upgrade I could then see the LWAP on the 4402 controller and had it working a treat.
Now the problems begin, I brought it into the office where we have 5508 controllers, plug in the LWAP into our management switch and boot it up I get an IP assigned from the DHCP server and the AP goes into discovery mode but never finds the controller.
I have logged the boot process but this does not give much away, our other 1100 series AP’s boot fine, I was hoping that somebody here could help me resolve this issue.
Link to upgrade material.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp169977
Console Boot Log.
Xmodem file system is available.
flashfs[0]: 9 files, 3 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6848512
flashfs[0]: Bytes available: 9150464
flashfs[0]: flashfs fsck took 36 seconds.
Base ethernet MAC Address: 00:1d:45:01:03:0a
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
Loading "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx"...##################################################################################################################################################################################################
File "flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(10b)JDA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 30-Oct-08 12:05 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x003C24A0
Initializing flashfs...
flashfs[1]: 9 files, 3 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6848512
flashfs[1]: Bytes available: 9150464
flashfs[1]: flashfs fsck took 5 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1131825Y
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:1D:45:01:03:0A
Part Number : 73-10256-06
PCA Assembly Number : 800-26918-05
PCA Revision Number : A0
PCB Serial Number : FOC11296730
Top Assembly Part Number : 800-29233-01
Top Assembly Serial Number : FCZ1131825Y
Top Revision Number : A0
Product/Model Number : AIR-AP1242AG-E-K9
The name for the keys will be: ap.cisco.com
% The key modulus size is 1024 bits
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]
ip ssh version 2
^
% Invalid input detected at '^' marker.
transport input ssh
^
% Invalid input detected at '^' marker.
aaa new-model
^
% Invalid input detected at '^' marker.
aaa authentication login default enable local none
^
% Invalid input detected at '^' marker.
o
^
% Invalid input detected at '^' marker.
Press RETURN to get started!
*Mar 1 00:00:08.640: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:09.675: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Mar 1 00:00:12.131: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(10b)JDA, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 30-Oct-08 12:05 by prod_rel_team
transport input ssh
^
% Invalid input detected at '^' marker.
logging origin-id string AP:001d.4501.030a
^
% Invalid input detected at '^' marker.
logging 255.255.255.255
^
% Invalid input detected at '^' marker.
logging trap 3
^
% Invalid input detected at '^' marker.
*Mar 1 00:00:28.149: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:28.627: Logging LWAPP message to 255.255.255.255.
%DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 172.30.156.66, mask 255.255.255.224, hostname AP001d.4501.030a
Translating "CISCO-LWAPP-CONTROLLER. somedomain.com "...domain server (172.22.7.22)
%LWAPP-3-CLIENTEVENTLOG: Did not get vendor specific options from DHCP.
%LWAPP-3-CLIENTEVENTLOG: Did not get log server settings from DHCP.
%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source (172.22.7.23)
%LWAPP-3-CLIENTEVENTLOG: Performing DNS resolution for CISCO-LWAPP-CONTROLLER. somedomain.com
%LWAPP-3-CLIENTERRORLOG: DNS Name Lookup: could not resolve CISCO-LWAPP-CONTROLLER.somedomain.com
%CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
And that is where she sits and does nothing more, I have noticed the DNS problems but the other 1100 series LWAP’s boot up after show that same issue.Hi,
If new ap's arent on the same subnet as the controller's management interface, you've got to 'tell' them how initially find the controller.
Dns and dhcp option 43 are the most common methods:
http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a00808f8599.shtml#backinfo -
Late 2012 Mac Mini slow after Yosemite upgrade
First time on forums - hope Im not asking a questions that has been asked several times before. I purchased a mac mini not even a year ago, and its was plenty fast until I updated to Yosemite. I also found a link to Etresoft from another questions and ran it. For the sake of expediency - Ill go ahead and post the results. Any thoughts? - all help is more appreciated than I can express in words..
Problem description:
Mac running very slow after Yosemite upgrade
EtreCheck version: 2.1.8 (121)
Report generated February 8, 2015 at 7:30:25 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Late 2012) (Technical Specifications)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
12 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
8 GB DDR3 1067 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000
SMS19A450 1440 x 900 @ 60 Hz
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: one day 23:7:9
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (240.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
VIA Labs, Inc. USB3.0 Hub
Western Digital My Book 1230 4 TB
EFI (disk4s1) <not mounted> : 315 MB
Time Machine (disk4s2) /Volumes/Time Machine : 4.00 TB (2.80 TB free)
VIA Labs, Inc. USB3.0 Hub
hub_device
Western Digital My Passport 0741 2 TB
EFI (disk2s1) <not mounted> : 210 MB
2 T - Passport Drive - User Data (disk2s2) /Volumes/2 T - Passport Drive - User Data : 2.00 TB (1.47 TB free)
VIA Labs, Inc. USB2.0 Hub
VIA Labs, Inc. USB2.0 Hub
hub_device
Apple, Inc. Keyboard Hub
Logitech Optical USB Mouse
Apple Inc. Apple Keyboard
MediaTek Inc MT1887 507.9 MB
disk5s1 (disk5s1) <not mounted> : 32 KB
JayHoferEDIT2014 (disk5s2) /Volumes/JayHoferEDIT2014 : 502 MB (0 B free)
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Firewire Information: ℹ️
Seagate FreeAgent FW 800mbit - 800mbit max
EFI (disk3s1) <not mounted> : 210 MB
2 T - Fire Drive (disk3s2) /Volumes/2 T - Fire Drive : 2.00 TB (1.61 TB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Magican.app
[not loaded] com.magican.iokit.filemon (1 - SDK 10.7) [Click for support]
[not loaded] com.magican.iokit.netmon (1 - SDK 10.7) [Click for support]
/Library/Application Support/MacKeeper/AntiVirus.app
[not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) [Click for support]
[loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) [Click for support]
/Library/Extensions
[loaded] com.karios.driver.DuetDisplay (1 - SDK 10.10) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.xpc.loginitemregisterd.plist
5 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
4 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.brother.LOGINserver.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.magican.castle.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.zeobit.MacKeeper.AntiVirus.plist [Click for support]
[running] net.kromtech.MacKeeper.plugin.AntiTheft.daemon.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[running] net.kromtech.MacKeeper.Helper.plist [Click for support]
User Login Items: ℹ️
duet Application (/Applications/Duet.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
Google Chrome Application (/Applications/Google Chrome.app)
Box Sync UNKNOWN (missing value)
Knock Application (/Applications/Knock.app)
MagicanMonitor Application (/Applications/Magican.app/Contents/Frameworks/MagicanMonitor.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 25 Check version
User internet Plug-ins: ℹ️
Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 [Click for support]
3rd Party Preference Panes: ℹ️
Backblaze Backup [Click for support]
Flash Player [Click for support]
Growl [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 499.25 GB Disk used: 258.52 GB
2 T - Passport Drive - User Data: Disk size: 2.00 TB Disk used: 532.92 GB
Destinations:
My Book [Local]
Total size: 4.00 TB
Total number of backups: 69
Oldest backup: 2014-05-28 08:55:42 +0000
Last backup: 2015-02-09 03:04:24 +0000
Size of backup disk: Adequate
Backup size 4.00 TB > (Disk used 791.44 GB X 3)
Top Processes by CPU: ℹ️
5% WindowServer
4% MailTab Pro for Gmail
3% Google Chrome
2% MagicanMonitor
1% bztransmit
Top Processes by Memory: ℹ️
490 MB MailTab Pro for Gmail
412 MB softwareupdated
283 MB AntiVirus
271 MB Google Chrome Helper EH
232 MB Google Chrome
Virtual Memory Information: ℹ️
2.53 GB Free RAM
6.05 GB Active RAM
1.39 GB Inactive RAM
1.70 GB Wired RAM
91.14 GB Page-ins
154 MB Page-outs
Diagnostics Information: ℹ️
Feb 8, 2015, 08:27:16 AM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-08-082716_[reda cted].crash
Feb 6, 2015, 08:20:10 PM Self test - passed
Feb 6, 2015, 07:49:11 PM /Users/[redacted]/Library/Logs/DiagnosticReports/DashlaneAgent_2015-02-06-19491 1_[redacted].crash1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1217 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1000 80 40 500 300 85 25 20480 262144 20 2000 524288 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays CFBundleIdentifier 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' 'com\\.apple\\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n'"${k[22]}"'%s\n' {Privacy,Mode}': %s\n' '\n ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' '\nContents of %s\n '"${k[22]}"'mod date: %s\n '"${k[22]}"'checksum: %s\n%s\n' '%d MB: %s\n' );b=(com.adobe.{AAM.Updater-1.0{,},AdobeCreativeCloud,CS{4,5}ServiceManager,fpsaud,SwitchBoard{,}} ${k[21]}{aelwriter,{AirPortBaseSt,SafariNotific}ationAgent,FolderActions.enabled,installer.osmessagetracing,mrt.uiagent,ReportCrash.Self,{rp,usb}muxd} com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.daemon{,} com.microsoft.office.licensing.helper com.oracle.java.{Helper-Tool,JavaUpdateHelper{,}} com.teamviewer.{Helper,teamviewer{,_desktop,_service}} org.macosforge.xquartz.{privileged_{,},}startx );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' BEGIN { FS=":";if(system("sw_vers -productVersion|grep -q ^10\.1")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' { sub(/ :/,"");print|"tail -n'${p[10]}'";} ' ' NR==2&&$4<='${p[7]}' { print $4;} ' ' ($1~"wir"&&$2>'${p[22]}')||($1~"uts"&&$2>'${p[19]}') { print $1" "int($2);} ' '|grep DYLD' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q":"$0":"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/ /{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { if(NR<'{${p[14]},${p[21]}}') printf("^/[Sp]|'${k[21]}'");} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print;} END { split("'"${b[*]}"'",b);split("'"${c[*]}"'",c);for(i in b) print b[i]".plist\t"c[i];} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' $2=="=" { gsub(/[()"]/,"",$3);print $3;} ' ' /^\// { sub("/dev/","",$1);printf("%s: %s\n",$1,$9);} ' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[5]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[5]}'||T<'${p[20]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[6]}"'",m);} ' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS=":";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n "$5" => "$3" UID ("$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n "$3" (UID "$4", error "$5"): "$2;} END { u1="Mb/s";u2="per sec";u3="ms/s";u4="KiB/s";u5="%";u6="total";u7="MB";u8="ports";u[1]=u1;u[2]=u1;u[3]=u3;u[4]=u4;u[5]=u5;u[6]=u6;u[7]=u7;u[8]=u8;u[9]=u2;u[10]=u2;u[11]=u2;u[12]=u2;l[1]="Net in";l[2]="Net out";l[3]="I/O wait time";l[4]="I/O requests";l[5]="CPU usage";l[6]="Open files";l[7]="Memory";l[8]="Mach ports";l[9]="File opens";l[10]="Forks";l[11]="Failed forks";l[12]="System errors";for(i in o) print "\n"l[i]" ("u[i]")\n"o[i];} ' ' END{if($3~/[0-9]/)print$3} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[18]}"' "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n '"${k[22]}"'"T;printf("'"${f[9]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[18]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[19]}"'\\ :'"${k[16]}"' \""$0"\"/*/'${k[20]}'";p|getline b;close(p);if(b~/ /||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[20]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/:/;s/(\n)c/\1:/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}':/;s/ *: */:/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS=":"} { printf("'"${f[10]}"'",$1/1048576,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[17]}}'/ { getline d;if(d~"t") D=D"\n"$1;} END { print D;} ' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $3":"$2;} ' '|tail -n'${p[6]} ' $1>1 { $NF=$NF" x"$1;} /\*/ { if(!f) f="\n\t* Code injection";} { $1="";} 1;END { print f;} ' ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;1s/:/ tree/;/^ +[MPSV].+:../d;s/:$//;p;' 's/,.+"//p' '|grep -q e:/' '/[^ .]/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[18]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' env pluginkit scutil 'dtrace -q -x aggsortrev -n' profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls route egrep 'dscl . -read' );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[20]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|calling|(complet|enabl)ed|ry HD' -k Message CReq 'bad |corru|dead|fail|GPU |hfs: Ru|inval|v_c|NVDA\(|pagin|error|TCON|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0 < 0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno != 0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1:%@d:%s:%d\n\",@a);printa(\"2:%@d:%s:%d\n\",@b);printa(\"9:%@d:%s:%d:%s:%d\n\",@c);printa(\"10:%@d:%s:%d:%d\n\",@d);printa(\"11:%@d:%s:%d:%d\n\",@e);printa(\"12:%@d:%s:%d:%d\n\",@f);printa(\"3:%@d:%s:%d\n\",@g);printa(\"4:%@d:%s:%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{aut*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/{Lau,Sec}*/*t .launchd.conf" list '-F "" -k Sender hidd -k Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info} -P -m\ / '' -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:'}'"' -name\ kMDItem${k[16]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[16]} :CFBundleDisplayName $EUID {,'/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s $TMPDIR../C -type f -size +'${p[11]}'M -exec stat -f'%z:%N' {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' "-o ',\"name\":\"[^\"]+' L*/A*/Fi*/P*/*/a*.json" users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$Sender \$(RefProc): \$Message" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "sandbox ex" ' );N1=${#c2[@]};for j in {0..15};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console}\ log Activity SMC Login\ hook 'I/O per process' 'High file counts' UID Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ {caches/logs,overrides} Shutdown\ codes Heat Diagnostic\ reports Bad\ plists Free\ space VM );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D${i}0'(){ A'$i' $@;C0;};';for j in 2 3;do eval D$i$j'(){ local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D10 0 N1+1 2;D10 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D12 22 15 63;D10 0 N1+2 3;D10 0 N1+15 17;D13 3 0 N1+3 4;D13 4 0 N1+4 5;D13 N3+4 0 N1+9 59;for i in 0 1 2;do D13 N3+i 0 N1+5+i 6;done;D13 N3+3 0 N1+8 71;D13 62 1 10 7;D13 10 1 11 8;B2&&D13 18 19 53 67;D12 11 2 12 9;D12 12 3 13 10;D12 13 42 70 101 25;D12 65 6 36 13;D12 45 20 52 66;D13 66 7 37 14;D13 17 8 15 38;D10 9 16 16 77 45;C4;B2&&D10 35 49 61 75 76 78 45;B2&&{ D10 28 17 45;C4;};D10 12 40 54 16 79 45;D10 12 39 54 16 80 45;D13 31 25 37 15;B2&&D13 19 21 0;B2&&D13 40 10 42;B2&&D12 2 29 35 46;D12 44 34 43 53;D12 25 22 20 32;D12 33 0 N1+14 51;D12 34 21 28 35;D13 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D13 50 38 5 68;B4 19 0;D23 37 33 34 42;B2&&D13 46 35 45 55;D13 38 32 31 43;B2&&D13 59 4 65 76 91;D13 63 4 19 44 75 95 96;B1&&{ D13 53 5 55 75 69&&D13 51 6 58 31;D13 56 5 56 97 75 98&&D10 0 N1+7 99;D12 55 5 27 84;D13 61 5 54 75 70;D13 14 5 14 12;D13 15 5 72 12;C4;};D13 16 5 73 12;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 20;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 6 6 73 102;B2&&{ A1 18 26 94;B7 6;B4 0 0 11;C3 23;};A1 18 26 94;B7 6;B4 0 0 11;C3 24;D13 60 14 66 92;D13 58 14 67 93;D13 26 4 21 24;D13 42 14 1 62;D13 43 37 2 90 48;D13 41 10 42;D12 48 36 47 25;A1 4 3 60&&{ B3 5;A2 14 61;B4 0 6 21;B4 5 0;A2 14 62;B4 0 0 21;B6 0 6 4;C3 5;};D13 9 41 69 100;D12 32 21 68 35;D12 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D13 54 5 7 75 76 69;D13 52 5 8 75 76 69;D13 57 4 64 76 91;D12 0 4 4 84;D12 1 4 51 84;D13 21 22 9 37;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D20 31 47;D13 64 4 71 41;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 29;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 16;A1 26 50 64;B7 16;C3 6;D13 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The results are on the Clipboard.
Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Mac Mini (Mid-2011 Core i7) Slow after Yosemite Upgrade
I've searched the other "slow after Yosemite upgrade" threads but those seem to relate to Core Duo 2 machines with less RAM. I have a Core i7 MM w/ 8GB of RAM, after the Yosemite upgrade it constantly lags, I can barely type on it these days because the text lags so badly. It's unusable to say the least. Is there anything I can do to speed it up? There must be a reason why the performance is so bad.
Problem description:
Slow after Yosemite upgrade.
EtreCheck version: 2.1.8 (121)
Report generated 1 March 2015 8:48:15 pm AEDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
Mac mini (Mid 2011) (Technical Specifications)
Mac mini - model: Macmini5,2
1 2.7 GHz Intel Core i7 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6630M - VRAM: 256 MB
Thunderbolt Display 2560 x 1440
DX80 spdisplays_1080p
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 12:20:13
Disk Information: ℹ️
Hitachi HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.96 GB (551.28 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. iPad
Apple Inc. Apple Thunderbolt Display
Apple Inc. FaceTime HD Camera (Display)
Apple Inc. Display Audio
Firewire Information: ℹ️
BUFFALO INC. HDD 800mbit - 800mbit max
EFI (disk2s1) <not mounted> : 210 MB
ext2tb (disk2s2) /Volumes/ext2tb : 2.00 TB (686.75 GB free)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Apple Inc. Thunderbolt Display
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Extensions
[loaded] com.sophos.kext.sav (9.2.50 - SDK 10.8) [Click for support]
[loaded] com.sophos.nke.swi (9.2.50 - SDK 10.8) [Click for support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.1) [Click for support]
[not loaded] com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.sophos.uiserver.plist [Click for support]
[running] net.culater.SIMBL.Agent.plist [Click for support]
[loaded] org.gpgtools.gpgmail.enable-bundles.plist [Click for support]
[loaded] org.gpgtools.gpgmail.patch-uuid-user.plist [Click for support]
[loaded] org.gpgtools.Libmacgpg.xpc.plist [Click for support]
[loaded] org.gpgtools.macgpg2.fix.plist [Click for support]
[running] org.gpgtools.macgpg2.gpg-agent.plist [Click for support]
[loaded] org.gpgtools.macgpg2.updater.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.fitbit.galileod.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[running] com.sophos.common.servicemanager.plist [Click for support]
[loaded] org.gpgtools.gpgmail.patch-uuid.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
[running] com.google.Chrome.framework.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
Google Drive Application (/Applications/Google Drive.app)
Dropbox Application (/Applications/Dropbox.app)
SpiderOak Application (/Applications/SpiderOak.app)
AirServer Application Hidden (/Applications/AirServer.app)
Plex Media Server Application (/Applications/Plex Media Server.app)
Box Sync Application (/Applications/Box Sync.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Click for support]
GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 7 Update 21 Check version
User internet Plug-ins: ℹ️
WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
1Password
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
GPGPreferences [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.96 GB Disk used: 197.68 GB
Destinations:
ext2tb [Local]
Total size: 2.00 TB
Total number of backups: 38
Oldest backup: 2012-10-07 09:09:10 +0000
Last backup: 2015-03-01 09:07:46 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 197.68 GB X 3)
Top Processes by CPU: ℹ️
40% WindowServer
12% firefox
2% Activity Monitor
1% Box Sync Monitor
1% sysmond
Top Processes by Memory: ℹ️
533 MB mds_stores
498 MB firefox
429 MB softwareupdated
172 MB InterCheck
155 MB SpiderOak
Virtual Memory Information: ℹ️
8.58 GB Free RAM
4.31 GB Active RAM
2.49 GB Inactive RAM
1.79 GB Wired RAM
10.08 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 1, 2015, 08:38:46 PM /Library/Logs/DiagnosticReports/SpiderOak_2015-03-01-203846_[redacted].cpu_reso urce.diag [Click for details]
Mar 1, 2015, 08:30:37 PM /Library/Logs/DiagnosticReports/WindowServer_2015-03-01-203037_[redacted].cpu_r esource.diag [Click for details]
Mar 1, 2015, 04:42:31 PM /Library/Logs/DiagnosticReports/firefox_2015-03-01-164231_[redacted].cpu_resour ce.diag [Click for details]
Mar 1, 2015, 08:26:20 AM Self test - passedWhen you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
G50-30 System is unstable after BIOS upgrade
After installing Windows 7 I decided to upgrade BIOS and picked the proposed update for Windows 7 64bit (http://support.lenovo.com/uu/en/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-30-notebook-lenovo).
After applying the upgrade system boot failed. This issue was fixed using yapha7's advice (see this thread: https://forums.lenovo.com/t5/Lenovo-B-and-G-Series-Notebooks/Lenovo-G50-30-Bios-update-crashed-installed-win-7/m-p/1693051#M32265).
Well, OS boots. But now I can draw violet lines on a viewport by pressing two mouse buttons simultaneously. WLAN breaks periodically, gets fixed by a reconnection. CPU consumption increases without any resorce-intensive task being launched. It iss understood that latter two issues might not be related to a BIOS upgrade. But they all appeared shortly after the upgrade.
Also it is not clear if I'm able to use USB 3.0?
The current BIOS version is A7CN47WW. Is it possible to rollback? Can you provide the original / any stable BIOS version (for Lenovo G50-30 Windows 7 x64) which is prior to the one available at the drivers download page? Thank you!hi a_demenkov,
Just to check, have you considered reinstalling Win7 after you got the issues that you described after flashing the BIOs to v47?
If you're leaning towards downgrading to the BIOS to v45, try the following:
1. Boot into the BIOs and enable BIOS Back Flash.
- Sample image
2. The BIOS v45 download link is not listed but if you look at the the BIOS v47 file below, you should be able to get v45 by renaming:
BIOS v47
https://download.lenovo.com/consumer/mobiles/a7cn47ww_64.exe
to
BIOS v45
https://download.lenovo.com/consumer/mobiles/a7cn45ww_64.exe
If you're not able to flash the BIOS inside Windows then you may need to do it under DOS.
How to flash InsydeH2O EFI under DOS enviroment
Goodluck!
Maybe you are looking for
-
Is there a way to ROTATE a flashpaper swf
Is there a way to rotate a flashpaper swf on a web page? My client is converting brochures to flashpaper and has no way to rotate the image from her application. She prints to flashpaper and the result is a portrait mode that really needs to be on th
-
Excel 2010; Two file opened in a single instance with two different windows... Is it possible?
Hello I'm using Excel 2010 I need to open a new Excel file to be display on a 2' monitor. The new file need to be under the same instance has my main Excel file to prevent problem with a special dll collection that I'm using. I need to have both fil
-
Can any one can provide ISU invoice material ?
Hi Expert , Can u plz provide me ISU INVOICE material for study and can u saggest how to install ISU in my system for practice. Abhishek Tripathi
-
Hello, I have several sequence files that make use of sequences in one common sequence file. There are two container types defined in that common sequence file (not, unfortunately, in a type INI file, I inherited it that way). When I try to start the
-
Connecting a form with a report
Hi, I have created a report page with two tables 'A' and 'B' , with ID as primary key for A and ID is foreign key for B . There is an edit link in each row of the report. When we click on that edit link it will be redirected to a form page which is b