Cancel active thread in the Portal

Hi
We are working with NW04S portal and I'm wondering if it's possible to cancel an active thred from the portal ??
If I remenber corectly it was possible in EP5 by going under system administration --> support --> portal runtime, something like that.
If I want to cancel a thread on NW04S where do I go and how can I do it ??
Regards

How did you do that?
I´m trying to do the opposite. Learners can see the cancel button in the portal but I´d like to avoid them from that option.
I know there is an options by hidding the BSP, but we want to use the standard.
Thanks a lot.

Similar Messages

  • To extract portal activity data from the portal into Solution manager.

    HI all,
          I need to extract the portal activity data from the portal into Solution  Manager BI and then later on into the SAP BW in order to generate BEx reports on the portal activity data. I need to know about the configuartions that are needed to be done on the portal side and the solution manager side so as to get the data into SolMan from portal.  Waiting for a response.
    Thanks and regards,
    Divya.

    Hi
    In solution manager you can do the  analysis of the ADC data files (Portal activity reporting) as as part of the End-to-End Diagnostics (Portal Activity Reporting tab in the End-to-End Workload Analysis).
    Will you see the Portal Activity Reporting tab under End-to-End Workload Analysis?
    by default PAR in SAP Solution Manager 7.0 EHP1 is deactivated ,since we requires
    some manual configuration of the Activity Data Collector.
    please follow the attached config guide in the SAP note for configuration.
    Jansi

  • Cancel Course Participation in the Portal

    We implemented the LSO this year, and I thought one of  the things users could do in the Portal is cancel participation in a course listed under My Training Activities.  But I don't see an option for this.  Did I misunderstand, or is there some configuration to do to enable this for learners?

    How did you do that?
    I´m trying to do the opposite. Learners can see the cancel button in the portal but I´d like to avoid them from that option.
    I know there is an options by hidding the BSP, but we want to use the standard.
    Thanks a lot.

  • Can you post a new message thread to the Portal Forum by e-mailing it

    Hi All,
    Is it possible to post a new message to the SAP Portal Forum by e-mailing it?
    Thanks.
    Regards,
    Mel Calucin
    Bentley Systems

    From Jive Software support, this is not available out of the box.
    -mqc

  • Configurations for extracting portal activity data from netweaver portal.

    Hi,
    I need to fetch  the portal activity data from the portal into Solution Manager. I would like to know the configurations on the portal that will be needed in order to extract the portal actvity data . How will i proceed extracting the portal activity data?
    thanks and regards,
    Divya.

    Hi Divya,
    We can not say that Early Watch Alerts is same as the  the portal activity report.
    Its a diagnosis service, for the solution monitoring of SAP and non-SAP systems
    in the SAP Solution Manager. Its gives you the complete details of your System.
    If we talk about Portal then you can get the details like :
    1. Java Heap details
    2. Memory Uses
    3.Portal Objects access details (Like Activity report )
    4.Server Nodes details
       and many more things.................
    The Underlying concept is to ensure smooth operation of individual SAP Systems
    by keeping you informed of their status and allowing you to take action,
    before severe technical problem occurs.
    Check the below link for ewa:
    [SAP EarlyWatch Alert overview|http://www.mediafire.com/?gilijcnnwet]
    [SAP EarlyWatch Alert|http://help.sap.com/saphelp_sm40/helpdata/en/87/50cce344ae495bae240add66a28ed7/content.htm]
    [Using SAP EarlyWatch Alert|http://help.sap.com/saphelp_sm40/helpdata/en/5a/b27f17edb04a6882c59f6619a267b9/content.htm]
    Regards,
    Piyush

  • BPEL Client API - Query Domain for Number of Active Threads ?

    Hi,
    Is there a method to query the number of active threads within the domain ? i.e. the same value displayed under Thread Allocation Activity shown on http://localhost/BPELConsole/default/domain.jsp?mode=thread
    I've browsed the API docs but can't find a way to do this... I might have missed something thought.
    Cheers,
    Rob

    Thanks Marc.
    How would I go about getting a domain handle ? The bit I'm stuck on in obtaining the initial authenticated connection to the server. The ngThreadInfo code does this:
    Server server = ServletUtils.getServer( request, response );
    String token = server.getServerAuth().getToken();
    and I guess the request/response vars provide the security context in which the getServerAuth operates ?
    Which API functions can I embed in a BPEL process to connect to the server and subsequently obtain the domain handle ?
    Cheers,
    Rob J.

  • How to list the documents in the Portal Activity Report?

    Hello,
    In the Portal Activity Report I would like to see the documents list with number of uploads, number of downloads and the username who have accessed the documents for monthly. Can any one help me where to mention all the details regarding this one. I didn't found anything regarding this in the Portal Activity Report.
    Thnx in advance.
    cheers,
    Murali

    Hello,
    Can anyone help me solving this problem.
    Thnx in advance
    cheers
    Murali

  • How to execute the Portal Activity Report

    Hello,
    In the System Administration -> System Configuration-> Service Configuration Editor
    Under Applications->com.sap.portal.activityreport.core-> Services->ActivityReport and I have configured the report.
    I saved I have restarted the service to effect the changes and in Portal Catalog
    Application->com.sap.portal.activityreport.core and I have administrated the changes. The Application Details Editor is displayed.
    I have clicked the Restart the portal also.
    I would like to know how to execute this Portal Activity Report after making this configuration.
    Can anyone help me.
    Thnx in advance
    cheers
    Kris

    Hi Kris,
    here an example with steps:
    1. Navigate to Content Administration -> Portal Content
    2. Step into a test folder and right click on the folder to create a new iView
    2. Select the template "Portal Activity Report iView"
       Name: Daily User Logins
       Technical Name: DailyUserLogins
    3. Open the newly created iView and define the following parameters
       under "Specify report content"
          Start of Reporting: Date 01.01.2005 and Time: 08:00
          End of Reporting: Date 31.12.2005 and Time: 24:00
          Time Unit for Reporting: Daily
       under "Configure report options"
          Information to Report: Number of users logged on
    You have created a new reporting iView, aggregating information about the number of anonymous and authenticated users on a daily basis.
    Hope this helps,
    Robert

  • Can the Portal Activity Report show unique users per page?

    Hello all
    I guess this is a rather simple question, but can someone tell me if the portal activity report can show a count of unique users per page per week for instance?
    Or will it just show which users have visited the page in a list without aggregating them to a number? And if the users are aggregated to a number, is it only uniwue users that are counted for the given period?
    Regards,
    Martin

    Hi sogaard,
    It shows the no of unique logons.isnt it.
    Try these blogs
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5497
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5436
    Hope this helps
    Regards
    Vineeth

  • How to view the Users in the Portal Activity Report

    Hello,
    Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
    Please explain me in detail how to view the Report.
    Thnx in Advance
    cheers,
    Murali

    hi,
    You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
    Do see the documentation
    http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
    Weblog :Portal SP9: Portal Activity Report
    Regards,
    Ganesh N

  • Differences between the Portal Data Collector and the Activity Data Collect

    Hello,
    I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
    Best Regards.
    Pablo Mortera.

    All of my SQL Server instances  are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database 
    I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
    Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
    Wizard.  Process Exit Code 5.  The step failed.
    Thanks
    PAULqaz

  • *IMPORTANT* Limiting the number of active threads

    Hi All,
    i have a few of questions so please bare with me:
    1) What is the best way to limit the number of active threads? ie i want to run 10 threads but i want there to be only 3 running at a time.
    this is how im thinking of doing it rite now:
    count = 0;
    while(...)
    thread[count].start();
    while(threadgroup.activeCount > 4){}
    count++;
    2) I have a class that extends thread how do i overide the constructor so that i can add the thread to the threadgroup?
    ok here is an example of what i mean:
    u can do this with a normal thread: Thread one = new Thread(threadgroup, "what");
    this is what i need to do tho:
    class whatever extends Thread {
    public whatever(int a, int b, ThreadGroup tg)
    { what do i put here to make this thread part of the tg threadgroup?}
    thanx for any help in advance and i kinda need a quick answer cause this is due soon , thanx youssefe2k4

    Hi,
    1) Why do you want to do that?
    2) super(tg, "a name");
    /KajIt's part of a homework assignment... I saw another post on this forum and one at JavaRanch where you need to create an application that given a directory will scan each file and report the file name and how many lines are in them... but it must be multithreaded, each thread scan a single file and updates some list and finally you can only have three of these file scanning threads running at the same time...
    Quote "To avoid having too many threads competing for the system resources when there are a lot of files in the directory, we will restrict the number of active Producer threads (active threads are started threads that have not ended yet) during the run time. For this assignment, at any time there should not be more than 3 active Producer threads. If there are already three active Producer threads during the run time, the program should wait until one of them ends to start the next Producer thread."
    I was think about working on it, so that I can strengthen my knowledge in threads...
    I still might do it, just for fun... I don't know yet...
    We will see...
    - MaxxDmg...
    - ' He who never sleeps... '

  • Where will the portal activity data reside in SolMan?

    Hi,
         I have activated the portal activity data reporting feature in the portal and the portal activity extractors in SolMan. Now where will the portal activity data reside in SolMan?
    Will the portal activity data be present in the SolMan BI (i.e infocubes such as 0SMD_ADCD, 0SMD_ADCH)?
    thans and regards,
    Divya.

    Hi
    seems it stores ADC datafiles files in file system of portal, from there its fetching ad reporting data time to time
    pleare read this guide [PADC_Activation_Guide.pdf|https://websmp110.sap-ag.de/~sapidb/012003146900000606822009E/PADC_Activation_Guide.pdf]
    and check this [How PAR works?|http://help.sap.com/saphelp_nw04/helpdata/en/b5/c652070d474533a18a930112a4b926/content.htm]
    Jansi

  • After downloading i-clouds I keep receiving a no service message and could not activate iphone. it says the iphone could not be activated because the activation server is temporarily unavailable. i have read several threads with the same but no solution

    after downloading i-clouds I keep receiving a no service message and phone could not be activated because the activation server is temporarily unavailable.
    I have read several questions on this but dont see a solution.

    Activation requires a SIM, assuming the SIM is functional it should simply activate.
    The vast majority of activation issues are the result of devices that have been hacked or jailbroken.  If that is the case, no support can be provided here.

  • RFC: Introduce new 'Article/Tutorial (Comment) Threads' in the Web Dynpro Forum

    Some time ago I've suggested on SCN Support is both forum moderator and most active articles wrtiter
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net
    Message was edited by: Bertram Ganz
    This thread was branched from forum thread: How to print the data of a Model node.

    Hi Valery,
    thanks for this great idea. Indeed, there is no channel set up to communicate feedback/suggestions/questions to Web Dynpro tutorials or articles in a standardized way.
    WebLogs can be commented on the WebLog page itself and they are announced in a special ;\ New Web Dynpro Weblogs which can be opened via the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d">Web Dynpro Feature2Sample Matrix</a>. Actually the section 'Further Information' lists all related articles, WebLogs etc. These links are regularly updated so that the Sample Description Pages helps to keep all links to valuable information in a central place.
    The 'Sample Description Page' should additionally comprise a section <b>'Discussion'</b> with a link to the above 'Article Comment Thread' in the Web Dynpro forum. The reader downloads the material from the sample description page and also finds a link to the related 'Article Comment Thread' there.
    For all new articles (which are combined with a related 'Article Comment Thread') the <i>Further Information</i> links could point to the 'Article Comment Thread' (which then itself links to the article) but not directly to the article resource. The reader can then also have look at the existing comments to the related resource. As an alternative the article PDF itself should have a permanent link to the 'Article Comment Thread' in the Web Dynpro Forum.
    Please post your comments on this idea.
    Regards, Bertram

Maybe you are looking for