Cancel button functionality does not work--- while searching for G/l Acc
HI SAP SRM Gurus,
This is regarding an issue faced by the end user.
For information my client is on WAS 6.4 Patch Level 155, SRM 4.0, EBP 5.0, SRM Server 5.0.
In account assignment details..while searching for G/l account for the Account Assignment used at the time of creation of the shopping cart, if no G/l account is found, the Cancel button functionality provided, does not work, however when
G/l account(s) is/are found, then the Cancel button functionality
works properly.
Kindly assist.
Awaiting your reply in this regard.
Thanks in advance
Ankur
Hi,
Sound like a bug.
Did you open an OSS ticket ?
Kind regards,
Yann
Similar Messages
-
My search function does not work. How can I fix it?
Hello
I need help I just bough a macbook 13 inch, with snow leopard
and the search function does not work.
The window opens but when I write the name i searh it gives me no results.
How can i fix it?
Do i need really to re install all snow leopard?
thanks
ptHello paola t & welcome to the forums
I need help I just bough a macbook 13 inch
It may be that Spotlight hasn't completed indexing just yet - is there a dot (indicates busy) inside the magnifying icon top right?
Also, check System Preferences/Spotlight to see what if any exclusions are configured, etc. -
Mail search function does not work after reinstalling
Hello!
I recently had to re-install Leopard on my MacBook Pro.
I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
All mails are present, and everything works great, apart from the fact that the search function does not work.
I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
What can I do about it ?It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
Thanks to leonie for some information contained in this. -
Mac Lion. Search function does not work in mails.
Hello,
I already wasted several hours trying to find solution for a problem which appeared with Lion, search function does not work, in mail at least.
I was not using Leopard before and I am not a mac expert.
(search function was already bad in the normal it was already bad in the normal 10.7 set up but at least it was working in mac mails).
I tried reindexing via spotlight privacy settings (adding and removing HD) but does not work much better.
I don't want to go to terminal, as as mentioned I don't know enough about mac to try this.
What to do?
Thanks,
C.Anyone? Any ideas?
-
IPad 4 switches off when i am using it, even when battery is fully charged. Restore function (holding down both buttons) often does not work. Cannot power up iPad. I have updated software, restarted computer, but no success. I did restore the iPad about 8 times during the past 2 weeks. Just completed another restore. iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready. That was 30 minutes ago. iPad still won't start. I am looking down the barrel of yet another fruitless restore. What a crap product.
Try a reset:
Hold the Sleep and Home button down until you see the Apple logo. -
when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue? My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not. Any suggestions?
Hello Nina Izurin,
While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..
I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand
-
Crystal Report for VS2010 - The Go To Page function does not work
When running a report into Crystal(VS2010), the Go To Page function does not work. Typing in a page number and pressing Enter does not take you to that page. The report remains on the current page. I'm not sure if there is suppose to be a button like the one in Crystal 8.5(VS2008).
As long as you are using the CR assemblies for VS .NET, the viewer (Win) should look like this:
Remember, the ActiveX viewer based on the Report Designer Component (RDC, referencing craxdrt.dll) is not supported in VS 2010.
- Ludek
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Share Your Knowledge in SCN Topic Spaces -
When opening firefox I receive this message. I unistalled and then installed again and still receive this message. The debug function does not work- firefox closes.
it's a box that opens with blue header firefox.exe- Application error
red circle with white X to left followed by: instruction at 0x1000865c referenced memory at 0x1000865c The memory could not be read. Click OK to terminate program. Click on CANCEL to debug program. CANCEL as well as OK shut down firefox. XP continues to work. Sorry, but I'm not familiar with the tech side of this.
Thanks -
Palm Desk Top 6.2 Address Look Up Function Does Not Work In Windows 7
I recently upgraded my desk top computer's operating system from Windows Vista Home Premium to Windows 7 Home Premium. I synchronize with a Palm Tx PDA. HP PalmOS customer support Chat helped me work through a compatibility issue that was preventing display of Address, Calendar, Memo and To Do items on my desk top computer via the Palm Desk Top 6.2 application. I now find that the address look up function does not work (although it worked fine when I was running Vista). Without success, I tried running the repair tool as well as reloading the software (both overlay and clean reinstall). I would appreciate any help or suggestions to fix?
Post relates to: Palm TXHi,
844869 wrote:
CREATE TABLE TEST_EMPLOYEES
FIRST_NAME VARCHAR2(26 CHAR),
GRADE VARCHAR2(5 CHAR)
INSERT INTO TEST_EMPLOYEES (FIRST_NAME, GRADE) VALUES ( 'William', 45 ); ...Thanks for posting the CREATE TABLE and INSERT statements; that's very helpful.
William&45 1
Robin 43 1
Raymond 43 1
Richard 43 1
Karen 28 1
Michelle 1
Jonathan 1
Mark 1
Ann 1You may have noticed that this site normally doesn't display multiple spaces in a row.
Whenever you post formatted text (such as query results) on this site, type these 6 characters:
\(small letters only, inside curly brackets) before and after each section of formatted text, to preserve spacing.
This is one of the many helpful things found in the forum FAQ {message:id=9360002}
Are the results above what you're getting with some existing query, or are they the results you want?
If those are your current results, post your query. In that case, what are the results you want? Do you want this?FIRST_NAME GRADE RNK
William 45 1
Robin 43 2
Raymond 43 2
Richard 43 2
Karen 28 5
Michelle 6
Jonathan 6
Mark 6
Ann 6
Edited by: Frank Kulash on Feb 21, 2013 2:39 PM
I see you've added the desired results to your original message.
Here's one way to do that:SELECT first_name
, grade
, RANK () OVER (ORDER BY grade NULLS FIRST) AS rnk
FROM test_employees
ORDER BY grade DESC NULLS LAST -
Recently upgraded to a new iMac running 10.9.4. Printing works well from this computer and all other devices (iPad, iPhone, etc.). However, the "scan to computer" function does not work. In the "Scan" section of HP Utility when I click on "Scan to Computer" the error message reads "Scan to Computer Cannot Be Enabled. The software required for Scan to Computer could not be located on this computer. Please download and install the latest HP recommended software for your device from http://www.hp.com/support, and then try again.
Of course I have done this... twice... still no luck. Also ran Software Update and there was an update, but it made no difference.Yes, did all that... in order. It did not resolve the problem. However, I did find what appears to be the answer. After re-installing the driver software DO NOT immediately follow the prescribed steps. Instead, quit the installer, restart the Mac, and an Apple software update will appear after restart. Install that software update, and even though the computer and software do not call for it, restart the Mac again. Only then add the printer and follow the balance of the steps. It works! Thank you for your help.
-
Siri does not work when used for calling a contact function
Siri does not work when used for calling a contact function
Very strange, try to turn off/on your iPhone. Or make a reset (home+power button)...
If it continues try to restore it. -
I-5 vibration function does not work - any ideas?
i-Phone 5 vibration function does not work - any ideas why?
I am having similar issues. I took to Apple Genius Bar today and of course it would not do it. His suggestion was to restore iOS 6 and see what happens. I'm currently restoring and I'll see what happens
-
Iphone 5c clock does not work while asleep
done hard reset updated on and off set automatically time but it works while the device is in use
iphone 5c clock does not work while asleep
I have to ask how you know... does it show the right time before you go to sleep? When you wake up? -
My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.
Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.
Maybe you are looking for
-
Would love to know how to save the podcast into a manageable audio file and share it with the site administrator of my new website. Is it easier to upload it to Itunes and then direct the admin. to the podcast to download? Any help will be greatly a
-
I wanna know how to search for a specific record, if i have made a data block. with up and down arrows, i move to the next/last record. but how can i search? i don't know how to make at a specific time, all the fields blank, and i type a part of name
-
What is this "Recovered file" in Trash?
Every time I log-in there is a folder in the Trash called "Recovered Files" which contains a document titled "com.shirtpocket.lastVolumeList" What is this document? Is it correct that it should be there at each log-in? Thanks for your help. John
-
I want to read a pdf that has been saved to the database and if it has been signed display the signer's name and the sign date to the user. If the file is first saved to a physical location I can do this with the SDK/ JSObject it there anyway I can
-
is there any code available for gettin the imei number internally