Cancel Confirmations for Limits Orders in SRM.

We are able to Create Confirmations in SRM for Limit orders and It creates a service entry sheet in ECC with Mvmt Type 101.. When we try to cancel these Confirmations from SRM. It a creates a Cancellation document in SRM but it doesnu2019t flow to ECC.. when Checked in the Shopping cart Related documents it is found that the Qty is getting added up even for cancelled Confirmation which got created.
We are looking for Solution if we cancel the limit order confirmation from SRM , it should cancel the service entry sheet posted in backend ECC..
And we will be doing confirmations/Cancellations only from SRM
Please help us with your responses.. we are on SRM 7.0 EHP 1 .

Hello,
We have faced same issue in SRM 5.0
We created a custom program for it using RFC FM BBP_entrysheet_cancel  we have to cancel the Entry sheet in  backend.
Regards,
Neelima

Similar Messages

  • Production confirmations for Production order

    Hi all
    I am using ECC 6.0 and Production orders. When I do a final confirmation to the order the order is in a 'CNF' status. Now after it is in a CNF status if I try to perform another confirmation using a CO15 then it allows me to do a confirmation with a 'warning'. If I am using a CO11 or CO11N then its a hard error. Is there a way I can get a warning message on a already Final confirmed order in tcode CO11 or CO11N?
    thanks

    Hi John,
    You want the system to allow to confirm operation wise even though you have already confirmed with respect to order
    I dont think its possible,because if you see logically -once we do the confirmation for the order system will complete the confirmation for operations too ie it will book the time,cost to the respective cost center
    So logically it will not be possible to confirm the operations which are already confirmed when doing the order confirmation
    If you want to do order wise confirmation then you have to cancel the order confirmation & then you will be able to do operation wise confirmation
    Hope the above explantion is understandable
    Revert back if you have further query
    Reward points if useful
    Regards,
    SVP

  • Confirmations for Limit Orders in ECS

    In extended classic scenario when creating a limit order, there is an error in process in the local PO related to the follow-on documents for goods receipt with the following error message:
    'Combination of GR/IR control not allowed for external services'
    It is only possible to create the order in the backend if the Invoice Only option is selected in the Limit Order, but then this means it is not possible to create a confirmation for Limit Orders!
    Has anyone else come across this problem in ECS for limit orders?  As far as I am aware the functionality should work with GR-based invoice verification.  In the backend PO it is possible to create the same order without any errors!

    Monica,
    My analysis till now is:
    1) It is true that limit oders are not going with "Confirmation & Invoice" flag. We need to raise OSS.
    (There is one additional problem with this is "The vendor master flags don't get transferred to PO" for this you will have to implement the OSS notes 956083.)
    Now after applying this notes you see the standard functionality:
    2) If we are creating PO with "Invoice Only" flag then there are follwoing options:
    a) If the "GR based invoice" flag in vendor master is checked then the POs goes into D item category and you can enter a service sheet for them.
    b) If the "GR based invoice" flag in vendor master is NOT checked then the POs goes into B item category and you can enter invoice just after PO.
    I made change in V_T163Y for B item category and checked the flag for GR but then too I am not able to enter GR for item category B.
    Please assign points for useful answer as applicable.

  • Progress confirmation for process order

    Hello to all,
    I want to use the progress confirmation functionality for process order. I know that it is possible for production orders, but I couldn't find respective transaction for process order. Do you know if it is possible to use progress confirmation for process orders.
    BR,
    Nikolay

    Thanks for your inputs, but they are not useful!
    COR6 - it cannot be used once the order is confirmed at phase level;
    COOISPI - it's a report
    COR6N -it is the standard transaction for process order confirmation
    I want to do so-called "unplanned milestone" for process orders, something similar to CO1F for production orders.
    BR,
    Nikolay

  • Confirmation for PM order

    Hi PM Expert,
    When i am creating confirmation for PM order, system do a goods movement as a automatic without  ticking goods movement  button. How to set consumption after ticking goods movement  and save button.
    Regards,
    Aktolga

    Hi,
    Please ensure you have not enabled back flushing in component tab,by which material would be issued automatically.
    Regards,
    Sudhakar

  • Restricing CO11N confirmations for TECO orders

    For production orders with partial confirmations and TECOed say  TECO & PCNF, PDLV  how to restrict further confirmation happening in CO11N
    Thanks & Regards
    Manikandan .J

    Hi Mani,
    You can restrict it the confirmations for TECO order by following ways.
    1) Using User Status (T.Code BS02) - You can set both Production order and / or Prod. Cofirmation
    2) User Exit
         - CONFPP05 PP order confirmation.: Customer enhancements during saving
         - CONFPP04 PP order confirmation: Customer-specific input checks 2
         - CONFPP02 PP Order confirmation: Customer-specific input checks 1
    Regards,
    Dhaval

  • Confirmation for Service Order

    Hi Gurus,
    How to create follow-up document of Confirmation for a service order in IC Agent role
    Thanks,Sarat

    You could use the left navigation bar to go to service confirmation tab and just click create on service confirmations, the prerequisite is you must be on the service order from which u want to create Confirmation, this will link up all the transactions your interaction record
    Second way of doing it, is click on followup document from service order to create service confirmation prerequisite here is that you must have the configuration ready for creating follow up documents
    Thanks
    Raj

  • Confirmation for Service PO from SRM to R/3

    Hi All,
    We are using SRM 3.0, EBP 4.0 ECS and R/3 4.6C.
    I have posted confirmations for a Service PO successfully in SRM and a GR and Service Entry Sheet has been posted in R/3 correspondingly. However some of the confirmation results in the status "Currently being transferred" and R/3 does not get updated with GR and Service Entry Sheet.
    I have checked that the workflow has processed succesfully and it is in 'Completed" status.
    Our observation -  While posting cofirmation for a Goods PO, the GR is posted in R/3 using IDOC. We can trace the same in transaction WE02. While posting confirmation for a Service PO, GR and Service Entry Sheet is posted in R/3, however not sure how this is posted as we are not able to trace any IDOC for a Service PO confirmation.
    I need to know how confirmation is posted for a Service PO.
    Any pointers to resolve the above issue would be highly appreciated.
    Thanks in advance,
    Francis

    Hi Francis,
    Please refer to the following threads for some ideas:
    Confirmation not transferred to backend R/3
    Re: PO confirmation havinmg status error in transmission
    Re: Coudnt create confirmation or Invoice from EBP
    Cheers,
    Serguei

  • Generating Inbound delivery based on Vendor Confirmation for Purchase order

    Is there a way to create Inbound deliveries based on Vendor confirmation for a purchase order.
    Here is the complete scenario.
    Buyer Creates the PO for qty 100 and Date August 29
    Vendor Confirms that he can supply a qty of 50 for August 29 and remaining 50 for Sep15th
    Based on vendor confirmation, Buyer creates 2 vendor confirmations (AB) to match with the data received from Buyer, without modifing the PO.
    Requirement:
    Inbound deliveries should get created based on the vendor confirmation.
    As MRP looks at Inbound delivery for Planning purposes once they are available, Inbound delivery should match with vendor confirmation data.
    Is it possible to get this requirement met with standard config available in SAP.

    could you eventually get the answer from the docu Set Up Confirmation Control

  • Goods Receipt after Completion Confirmation for Service Order

    Hi,
    We have a scenario in which a Notification is used to create a Sales Order & a Service Order using the action button.
    The Sales Order has a old/used product as a line item which we will consume along with some other new parts(added in the components tab in Service Order) to make a remanufactured product which we will obtain after using IW42 for Completion Confirmation. (The Service order is to carry the cost of refabrication/refurburishment & additional parts as well)
    We need to do Goods receipt of this remanufactured product to bring it into stock so that we can deliver the same using the same sales order.
    Is this possible? We have tried using Refurbishment order both CS/PM but have not been successful in inwarding the remanufactured product using IW8W.
    Kindly do suggest possibility of using a Service Order(created through a notification) with a GR feature for the above process of inwarding. Any alternate suggestions would also be very helpful.
    If this functionality can be achieved with some enhancement(custom exit, BADI etc) & some amongst you have worked on something similar , please do share your valuable inputs
    Thanks & Best Wishes
    Vishal

    Hi
    I dont think you will be able to do Goods receipt against prodcution order using inbound delivery VL31N. Inbound deliveries are normally created for Purchase orders and then GR can be posted wrt to the inbound delivery.
    Prod order is normally within warehouse only so you can use MB31 and post GR directly against Prod order.
    If you can explain more about your scenario hope we may help
    Please let us know
    thanks

  • Auto Confirmation for combined order with quantity distribution

    Dear All,
    we need your help that we have using the auto-confirmation for normal production order , but got the problem in combined order confirmation for final operation , in final operation we are not getting quantity distribution with respect to child order.
    please suggest any BAPI is there?

    Not possible in standard system.

  • EDI Confirmation for Purchase Order

    Hi All,
    Scenario : Our vendor is located abroad. The Purchase order is transmitted to the vendor via EDI. The vendor sends a confirmation for the PO as an IDOC via EDI. The suitation we have is that there are instances where there is a miss match( Requested item doesn't match the confirmed item) between the item in the PO and the IDOC received from the vendor as confirmation. But the PO is still confirmed. Is there a method where we identify when there is a miss match in the item.
    Any input on the above would be appreciated.
    Thanks
    Nigel

    Hi Nigel,
    You could control this via customizing purchasing->Confimrations->Setup confirmation using SPRO.
    here ,you can specify the tolerance for price quantity and material.
    The tolerances you define apply to all vendors. Using the enhancement MM06E001 provided by SAP, you can specify that the tolerances do not apply to certain vendors.
    If the acknowledged quantities, prices, and dates vary from those set out in the PO or purchase agreement, the system issues a warning message. In this case, the purchasing document is not updated.
    Regards,
    Karuna

  • Confirmation for Serialized Materials in SRM

    Hi,
    We have bunch of Serialized materials in SRM. Were able to create SC and PO 's/PR's were getting created.When I am trying to create Confirmation for Serialized Materials, its throwing me error and I dont see any field to enter the Serial Number.
    Am i missing anything on the config side or this is standard bug?
    If I am missing some steps to create confirmation for serialized items, pls od let me know.
    FYI, we are on SRM 5.5.
    Thanks,
    Satya.

    Awaiting some valuable inputs on this.
    Regards,
    Satya

  • Confirmation for Refurbishment Order

    Dear Experts,
    For refurbishment order after the service entry sheet is confirmation of activities required ? If required it should be carried out before service entry sheet or after that ? Please advice.
    Regards,
    Vivid

    Dear Thiagarajan,
    Thanks for the reply. I have done GR using MB31 as the system not allowing me to do GR through IW8W .
    Now the cost of the material got updated. Kindly tell whether I am proceeding in the right direction as per  the below sequence.
    Creation of Split valuation Material
    Creation of service entry sheet
    Creation of Refurbishment order with control key PM03
    Release of the order
    Goods issue for the order
    Creation of PO with the PR generated
    Release of the PO
    Entry and release of service entry sheet ( will the cost for service only get updated? Not possible to post the material also to the refurbishment order?)
    Good receipt for the order
    Technical completion of the order
    Settlement of the order
    Closing the order
    Thanks and Regards,
    Vivid

  • Milestone Confirmation for Process Orders

    Hi,
    We are using PPPI and I am trying to perform a milestone confirmation for phase (COR6).  Although it is working without errors, it prompts you for which phase to confirm. 
    In discrete PP, you set up milestones, and when you go to CO11 - confirm operation, the system automatically goes to the details for the first milestone operation.
    Is there any way you can do this with proces orders for COR6, ie automatically go to the detail screen for the milstone phase?
    Regards,
    Fotini Delgado

    Hi
    u can use t; code COR6 : confirmation of process order
    we can enter operation number (same as final one )
    so we can directly confirm last Phase
    or
    We can use
    CORR : for collective confirmation of process order
    or
    CORZ : confirmation : for time event
    please tell me if u have any more question
    Thanks
    Sunil Singh

Maybe you are looking for