Cancel or Reprocess BPM message with error on outbound state

I have a BPM scenario, IDOC comes from R3 and triggers a BPM. The BPM has a fork step which sends the message across 4 branches. Each branch has its own steps. Now, the problem is the IDOC has come and has trigerred the BPM but has errored on outbound side. The first step in each branch is a mapping step and the BPM has failed at this due to Jco communication failure. This has been fixed now. Now I need to reprocess this message, but can not restart as it shows succes message in inbound side.
I have to re process this message, but how?
Regards,
Jaishankar

Jai,
I dont know whether it is the correct appraoch.
Have a look at the transaction SWWERRE_DEBUG
Regards,
Sudharshan N A

Similar Messages

IDoc error :'Message has error at outbound side'.

Hi Experts,
am working on JMS-->IDoc, where TIBCO sends MBGMCR01 IDoc to ECC through XI .
in SXMB_MONI : shows red flag in outbound:with the message as 'Message has error at outbound side'.
please, suggest to solve the issue.
thank you,
MK

Hi
Have a look this
Message has error on outbound side in sxmb_moni
BPM - Message has error on the outbound side
Reprocess a message with error at outbound side

Messages with errors canceled

What is the meaning of this below message status in SXMB_MONI ?? What is the cause of this status ?? What is the meaning of message can be deleted with the next delete job ??
Messages with errors canceled
Processing of a message with errors was canceled. The message can therefore be deleted with the next delete job.
Thanks
Kumar

This status signifies the following:
1. The message has errors and was canceled manually.
2. The status is final, i.e., it cannot be restarted now.
3. The message can be deleted.
Regards,
Prateek

Message has error on outbound side in sxmb_moni

Dear All,
I have a query related to sxmb_moni messages.
Scenario : FILE - XI - IDOC
In sxmb_moni, message is successfully processed by XI but it is showing error " message has error on outbound side".
My questions are:
1)Is it possible to restart the message . When I tried to restart the sucessful message with error on outbound side it showed me message " You cannot restart xml message".
2)I tried to analyze error for outbound side using SM58, it showed me message "No connection to database,session terminated" .
Can anyone please advice what could be the reason for this .
Thanks & Regards
Prabhat

Hi Prabhat,
the message was send to the IDoc adapter. The error occures there.
Control, if the send XML can be translated to IDocs (use a message mapping).
Control, if the SM59 destination to R/3 is working.
Conrol, if the communication channel is customized in the right way. Control, if the port is customized (transaction IDX1).
Also the metadata for that IDoc should be in IDX2, that should happen automaticly, if not, assumedly the destination is not working.
Regards,
Udo

Cancel message with errors - How to automate this?

XI / PI SDN Community
I think that because of basis team settings every time a message fails to pass through the pipeline (for example a mapping error) XI tries to process this message over and over again for days!
Assuming that basis is not going to change any configuration on their end: Is therer a way to create a job (TCODE sm36) to do this cancel for me? - I mean I have access to go and manually cancel the message with errors tru the moni.
Regards,
José Francisco

Dear Jose,
Hi this is Tarang ...
For cancelling messages on Java engine ( ones that you see on RWB )
1. There is no standard program which would allow you to cancel the messages here
2. you can only set a maxim retry interval...i.e how many times a meesage in error should be retried foe sending...this setting can be done in transaction sxmb_adm....there is a parameter called IS_RETRY for this..
For cancelling the messages on ABAP engine ( ones that you see in MONI)
1. You can cancel them using the report rsxmb_cancel_messages ...but dont use this report independently...
coz there are some chances ..due to which you are getting a message in error in moni ..but the message is restartable......then if you directly cancel it , it is not correct
2. you cna club the above report with rsxmb_restart_messages...i.e you can create a job sequence where 1 step would be scheduling thee program rsxmb_restart_messages and then the ones that are not restarted properly ...yu can cancle using the second step in the sequence ....i.e rsxmb_cancel_messages
But be it ABAP / JAVA engine every XI landscape has many of the EOIO interfaces where in the concept is that if the first message in the queue gets stuck ...the message behind that should also get stuck....if you cancel message automatically (say using the above report), there are chances that particular message was configured for EOIO and the message behind that is actuaaly not meant to move ahead..but once you cancel the first message3 the other will go.....which is wrong and against the laws of EOIO...
hence SAP suggests " no automatic cancellation of message neither at ABAP nor at JAVA level should be done"
SAP says that manual cancellation of messages is included in the daily maintenance task of XI
you can obviously play with the number of retries using entry IS_retry
Hope this helps
Edited by: Tarang Shah on Mar 6, 2009 11:07 AM

Monitoring SAPconnect message with error into RZ20

Hello,
I would like to send an alert by e-mail every time a message aimed at being sent outside SAP (through SAPconnect layer) fails.
I have customized using standard help and OSS notes 546493 and 683974.
Into RZ20, I have customized the INT node with the following data:
maximum of alerts kept = 1
the newest alerts are kept
set "value obsolete" after 0 seconds
Performance attributes
last reported value
threshold values : 0 for the 4 fields
alert is triggered if the comparative value exceeds the treshold value
Methods attributes
start the data collection every 300 seconds
data collection method = SAPconnect
auto-reaction method = ZCCMS_Send_Alert_to_ALM_V2 (duplicated from CCMS_Send_Alert_to_ALM_V2)
With this customizing, I expected to trigger an alert at every message with error.
Unfortunately, it triggers the alerts only at the first message in error.
I have to complete the alert manually to expect an alert trigged for the following message with error.
Is there a way to complete the alert automatically (as soon as it is triggered) ?
Or how can I do to achieve what I would like to do ?
Thank you very much for your help.
Regards,
Fabrice

Hello Alexander,
yes, I have tried to set the "value obsolete" to 1 seconde.
Indeed, the value becomes obsolete but the alert is not completed.
Then, for the following error, I get a new value but no new alert is triggered.
Thank you.
Regards,
Fabrice

HT6114 computer gives restart message with error report, follows update 10.9.2

following update to 10.9.2 get restart message with error report

Hi g4towerman,
Thanks for visiting Apple Support Communities.
You may find the information in this article helpful with diagnosing and resolving the error you are seeing:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem."
http://support.apple.com/kb/TS4636
Best Regards,
Jeremy

Message has Error Status Outbound Side

Hi All,
I have one question.... we procssed one file from ftp it should creates Idocs in R/3 side we developed this scenario using BPM....it processed successfully inbound side but in Outbound side it is showing Red Flag (Error Meaase : Message has Error Status Outbound Side) and its not creating IDOCs in R/3 Side but in Process engine all steps completed Sucessfully and created Idocs in XI....i tried so many ways...like in Queues and Refreshed Cache and checked RFC connection in Both ways and checked passwords in communication channels.... i could't find any this....if any body help me on this....it would be appritiated.
This was i am testing on Test system i got this type of problem but in Development box it is working successfully we are using the same fuctionality and same code also i don't know why its happening.
Thanks,
Sudheer.

Hi,
Where are you find the Error and
> Process engine all steps completed Sucessfully and created Idocs in XI....
Can you explain in detail
Regards
Sangeetha

** Is it possible to skip messages with error in BPM and continue next msg

Hi Friends,
I am doing File to File BPM scenario. My Source XML is like as below.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Employee xmlns:ns0="http://www.test.com/XITEST/FileToFile/BPM">
 <Details>
 <EmpCode>10010</EmpCode>
 <EmpName>Jeg</EmpName>
 <***>M</***>
 <BasicPay>5000</BasicPay>
 </Details>
 <Details>
 <EmpCode>10011</EmpCode>
 <EmpName>Praksh</EmpName>
 <***>M</***>
 <BasicPay>4500</BasicPay>
 </Details>
 <Details>
 <EmpCode>10012</EmpCode>
 <EmpName>Nithya</EmpName>
 <***>F</***>
 <BasicPay>4300</BasicPay>
 </Details>
 <Details>
 <EmpCode>10013</EmpCode>
 <EmpName>Sunil</EmpName>
 <***>F</***>
 <BasicPay>4800</BasicPay>
 </Details>
 <Details>
 <EmpCode>10014</EmpCode>
 <EmpName>Abdul</EmpName>
 <***>M</***>
 <BasicPay>4750</BasicPay>
 </Details>
 <Details>
 <EmpCode>10015</EmpCode>
 <EmpName>Sathya</EmpName>
 <***>F</***>
 <BasicPay>4250</BasicPay>
 </Details>
 <Details>
 <EmpCode>10016</EmpCode>
 <EmpName>Rams</EmpName>
 <***>M</***>
 <BasicPay>8000</BasicPay>
 </Details>
</ns0:Employee>
If you look at the above message, the 3rd & 6th employee are female. In the BPM design, we use
a) 'Transformation' step, to split the messages (1:n).
b) Block Step (Mode : For Each) to process one by one message
c) in the Container Step, thru XPath expression we created one variable and assign '***' to that variable
d) In the Switch step we check whether variable is 'F' (Female). If it is there we insert control step to throw exception. (But, exception Branch is not added to catch the exception. The reason is that to restart the BPM)
e) If the *** is 'M' we insert Send Step to send the employee to the output file.
Note that if we insert exception handler branch, the BPM will tell this is completed. So, we are not able to restart those records (*** = 'F') after correct ***. Once the BPM is completed, that work item will not come in tcode 'Continue Process Following Error' option in tcode SXMB_MONI_BPE
Requirement is whenever the BPM encounters *** = 'F', it should throw an error and the same time BPM should not stop and continue with the next records.
Friends, we tried all the ways thru 'Queue Assignment' property of the BPM and made settings thru tcode SWF_INB_CONF. But, we are not able to achive this requirmenent.
'Restart possibilitye of the BPM for the error record and the same time should process the remaining correct records'.
Any idea friends, to solve this issue.
Kindly Reply,
Jeg P.

Use one more Receiver Abstract interface for this and do the message and interface mapping .
Collecting :
If ur record is female (u r checking this in swich step) , pass tht record to intreface mapping (use one branch here to collect the message).
Else you send that message to the target(else branch)
After that use one block for collecting messages and throw the exception for each record......

Resend cancelled messages with errors

Hi! I cancelled some messages then i need to resend them. however it show an error: "Unable to schedule n of n messages for processing; update the status". what are the steps to resend them back?
Thanks!

Hi Ronald - If the messages are cancelled, you should get them republished from source..
have a look at the below thread -
How to resend Message from RWB With status "Canceled with Errors"
If you can download the payload, may be you send it from RWB..
modified...

BPM - Message has error on the outbound side

I get this error 'Message has error on the outbound side" . I am using IDOC - BPM - JDBC. I checked SXI_CACHE and I see ret code 99 for this Integration Process. I tried to activate it. I see an error saying that ZCUST_NUMBER is not a component object of PAYLOAD. I have this context object defined on the Abstract Message Interface built to store the IDOC.
Any ideas are helpful

Michael,
The program outputs a returncode = 99 during the cache refresh of an integration process (ccBPM), with an error message that says that 'xxxx' is not a component of the 'PAYLOAD' data object.
If you are getting the above error, check OSS NOte 890760

Cancel a bulk of messages with code 014

Hi Forum,
We've been having problems deleting a bulk of messages that have failed & can be seen as code 014 after running RSXMB_SHOW_STATUS.
When trying to first cancel the messages with RSXMB_CANCEL_MESSAGES, the program doesn't seem to recognize the messages & I get the error "No XML messages exist for this selection" or "no text matches the selection criteria".
Thanks in advance,
Yoav Zilberman

Hi,
I don't think there is any provision given to cancel messages which are showing the sys error status.
Try deleting messages from sxmspmast and sxmspmast2 tables. That will be helpful in your case.
Regards,
Jitender

Message with error in SMQ2

Hi,
Does anyone know why some messages with message mapping failures shows up in SMQ2 and some messages with message mapping failures won't show up in SMQ2?
Thanks,
Jay

Hi Jung,
If there is a mapping problem then you should be able to see the error messages in SXMB_MONI.
SMQ2 will show errors in case there are problems with inbound queue.
The various problems can be queue getting stuck, queues not registered, etc.. incase of mapping error you cannot see error in inbound queue (SMQ2).
Regards,
Gautam Purohit

BPM :: Messages not processed at outbound side

Hi Experts,
We have 1000+ synchronous messages with BPM for only two days in July which havent processed fully. Now oncoming messages are getting processed fine, but the messages which were waiting for outbound processing from July are still waiting.
inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... cant see any failed/waiting messages iin queues .. when I checked the workflow logs few are showing workflow manually edited and processed after exception.
The date messages were triggered are 10/Jun and seems one or more messages were edited on 17/jun later.
Now we would like to know which workflow thrown the exception and what they have done during manual operation.
And how to process the remaining holding messages.
Thanks in advance for you ideas and suggestions.

Hi,
As you pointed out in your post that
"inbound side there is a success flag and outbound side it is showing a clock symbol(looks like scenario is collecting / waiting)... "
Now you have not explained your scenario completely. Still from the problem statement I can say that The BPM is waiting for some messages. There are three possible scenarios where you can see the clock symbol.
You have the option of collecting multiple messages for an interface and bundling them into one message, for example, individual sales order items into one sales order. To do so, you need to define a receiver step within a loop. The loop can finish in a variety of ways.
Payload-Dependent => The loop finishes when the number of messages received matches the number specified in the payload of the messages.
Time-Dependent => The loop finishes at a specified point in time.
Message-Dependent => The loop finishes when a specific message is received.
Once all the messages have been received, a transformation step bundles the messages collected in the container element and from them creates a message in the container element .This message is then sent by a subsequent send step.
The processes use one of the abstract interfaces as an inbound interface, and the other as an outbound interface.
Your BPM cannot be time dependant, otherwise it would have completed processing by now.
Either your BPM is message dependant or payload dependant. You need to find this out.
Check out the correlation (if) used in BPM, and the condition in BPM which stops the message collection.
Plesae check SXMB_MONI and study the messages which have been succesfully processed by the BPM, so if your BPM is message dependant you have to find out what message it needs to stop collecting the message, this you can do by studying the successful message processed by the BPM. In this case your BPM will contain a FORK step. In one branch of FORK step there will be a receive step, this is the step where you can find the message required to complete waiting stage of the BPM.
Check if this message has arrived or not.
If your BPM is Payload dependant, find out whether number of messages received by the BPM matches the expected count or not. In this case the BPM must have a container operation to count the messages received. If the count is less than required value, the BPM will remain in waiting state.
regards
Anupam

BPM message mapping error

Hi all,
I am using BPM for sending idoc to mq through XI.
In the transformation step, an error is throwing up in the workflow.
But I am using the same kind of mapping in other scenario. I am getting success message for mapping.
Any idea why its throwing up error?
Thanks,
Deno

Hi Deno,
There should be a invalid operation in your BPM itself. This problem cannot be viewed while design and configuration times. When you perfom a check (F7) your BPM, it will not show any errors and gets activated giving you a feel that your BPM is perfect. which is not true.
So check ur BPM once again and see if there are any invalid operations. Try doing this and u will get an error (99 code) in sxi_cache.
RUN1: Have a BPM with a simple rx and send steps. Save and active the same. Import it into Configuration and actiave it. Go to sxi_cache and u will find that the BPM has ret code 0.
RUN2: Insert a container operation ( assign a simple variable to your MESSAGEID > usign ur condition editor>interface variables>context objects> MESSAGEID). Try importing the same into your Configuration time and Active the same. When u go to Sxi_cache, u will find that the ret code is 99.
So the Design and configuration times dosen't show any invalid operations in BPM.
Cheers,
Siva Maranani.

Cancel or Reprocess BPM message with error on outbound state

Similar Messages

Maybe you are looking for