Cancel password auto-populate

Using Top Producer on iPad I cannot cancel the auto fill of the password so I can't use this program. I have read and followed every suggestion up to and including a reset after turning off all buttons in Safari Passwords and AutoFill. Any other suggestions appreciated!

Hi JonMorgan,
Based on your description, my understanding is that you want to achieve that the second dropdown gets populated depending on what the first dropdown is set to.
To achieve your requirement, creating cascading dropdown fields with InfoPath.
Please refer to the following links about cascade drop down in InfoPath form:
http://msreddysharepoint.blogspot.in/2012/12/infopath-2013-web-browser-creating.html
http://www.pointbeyond.com/2011/11/20/cascading-dropdowns-in-infopath-2010/
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Similar Messages

How do i turn off auto populate itunes?

Please tell me there is a way to switch OFF the function of having iTunes automatically populating itself with every mp3 file on my hard drive.
I was horrified to find very sensitive work related phone calls and interviews in my iTunes library because they are mp3 files. I certainly do not wish to have them there. I only want my music in iTunes.
So I now cannot have iTunes open when people or clients are round, because the files are people's names. It would take hours to rename them, and why should I have to? That's how I know what's in them.
It also means that I have 8GB of stuff I do not need in iTunes and when I watch important podcast videos, the sheer volume of stuff in there slows them down and keeps stopping and starting the videos, which is hugely annoying.
Is there a way to switch this auto populate off please?

Autastic wrote:
I definitely did not agree to it populating iTunes with all these files. It just did it on its own as soon as I opened iTunes after the new update. I assumed it was part of the update, then I saw all these millions of files. I also had my external drive connected (that has a backup of my C drive), and it copied all those files too - so I have two of everything in iTunes!
Does this mean that every time iTunes updates, this will happen? And of course an update is an install, and they happen a LOT! - way too often for my liking.
It's not normal, no, and has never happened to me on any of my systems. Something, perhaps a file permissions problem with a preference file or a corruption in the iTunes library files, caused the flag that tells iTunes that the first run has already occurred to be mis-set such that iTunes thought it was a new install.
(*) About the other headache the new update caused; when I connect my iPod I now get a box saying:
*"The iPod "(my ipod)" is synced with another iTunes library.*
*Do you want to erase this iPod and sync with this iTunes library?*
*+An iPod can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPod with the contents of this iTunes library."+*
*"Erase and Sync"* or "Cancel"
Ditto the above. That's a symptom of the same sort of problem. You'll probably need to clean up iTunes so that only the content you want there is present, and then allow your iPod to sync as if it was connecting to a new library (which in reality it will be).
I clicked Cancel as I went white thinking it would try to add all those millions of files to my iPod too. So now I can't even update my iPod.
Why on earth do I have a 2nd library? I have only ever had one PC with iTunes on. It is not on a network or anything. Is this due to the update to iTunes 10?
How can I stop future upgrades?
Turn off the automatic check in Apple Software Update, a separate application on your system.
But again, this is not normal behavior. Something was corrupt in the iTunes files on your system. So once you get a clean set, this problem should not happen again unless the same conditions (whatever those might have been: software conflict, power surge, etc.) occur again. You'll want to do some of the normal steps to check for disk problems/corruptions in Windows to make sure this isn't a systemic problem with your drive or WIndows.
Regards.
Message was edited by: Dave Sawyer

How do I cancel the Auto Renewal for Zoosk?

After MANY attempts, I cannot find how or where to cancel the Auto-Renewal for the Zoosk online dating site. Please help.

Hello purcheek,
The resource below will explain how to manage your subscriptions in the iTunes application on your Mac. I've highlighted the key information here for you. Click on the article for complete details.
Manage your auto-renewing subscriptions - Apple Support
https://support.apple.com/en-us/HT202039
Use your computer to manage subscriptions
Open iTunes.
If you're not signed in, go to Store > Sign In and enter your information.
Go to Store > View Account. If prompted, enter your password and then click View Account.
On the Account Information page, scroll to the Settings section.
Click Manage to the right of Subscriptions.
Choose the subscription you want to manage.
Use the options to manage your subscription. You can choose a different subscription period, or turn off Auto-Renewal.
If you don't see a subscription in iTunes and are still being charged, you'll need to contact the publisher directly to cancel your subscription.
Hope that helps ...
- Judy

Cancellation of Auto Renewal

How do I cancel the auto renewal of photoshop? Thank you

iTunes Store: Purchasing and managing auto-renewing subscriptions
I learned this the hard way when I had pandora-one
Hope this helps.

Is there a way to auto-populate text based on a selection?

I honestly don't even know how to word my question haha... so the title may be misleading...
For my job I need to fill out indesign files, and at one part of the file based on the state a person is from I need to paste a specific e-mail in several places.
Is there a way where maybe I create a dropdown menu of the several state e-mails I can choose from, and upon choosing it auto-populates that choice into the several other places?
I guess, is there a way where if I make a select or input text into one area it will generate in the other areas as well?

Maybe you need some kind of clipboard manager to choose several texts to paste
http://lifehacker.com/5298615/five-best-clipboard-managers

How do I auto populate a text box if a check box is ticked in Acrobat XI Pro?

Basically, i have been asked to create a catalogue of sorts for my organisation with a form at the end that will be completed by the end user. it will be a catalogue of books and toys that people can request to borrow from us. Its all specialist equipment that we loan out for disabled people. When they are scrolling through the catalogue i would like there to be a check box and if they would like to borrow that item they would tick that box and any other products that they would like to borrow. Is it possible to have a text box that auto populates with a list of the items they have selected. the form would be similar to the one below. it the box next to Products to borrow i would like it to add products as they tick the boxes in the preceeding pages. I would be happy to share an example document if needed. thanks in advance for any help.
Name
Address
Products to borrow

Thank you for your willingness to help.
The problem with a drop down is that it would not present all options when printed, and some of our users will be completing this form manually (printed). All options need to be displayed.
Here's an example:
SELECT PREFIX:
A12
B12
C12
They can check one of the above and then based on what they select, I want the next box (a text field) to pre-fill with their selection.
So if they select A12, the text box would automatically fill with A12.

Auto-populate fields in Custom Object Based on Another Record

Hello,
I am hoping to auto-populate a few default values in a new Custom Object record based on an associated Lead record. The layout is this:
I use the Lead record to take care of most of the information in the sales stages until the product is sold. The Lead record has fields to record information for a one product sale. The sales person can then use the Custom Object (called 'GX Additional Product') (which shows up in the Related Information section of the Lead record) to add additional items to a sales order request. Many of the fields in the GX Additional Product (custom object) record are identical to fields already filled out in the Lead record.
What I would like to do, is when a new GX Additional Product (custom object) is added to the Lead record, those identical fields already filled out in the Lead record, by default, populate the corresponding fields in the new GX Additional Product (custom object) record.
Is this possible? Is this something that can be done with JoinFieldValues? If so, I've had a bit of confusion trying to set up a JoinFieldValues expression.
If you have any information to share that would be helpful, that would be greatly appreciated! THANKS!

Hi,
You can use JoinFieldValue to Custom Objects from other entities, cause you will have other objects' ID recorded inside the CO's, when you open a new detail record associated with the parent. Make sure your custom object is showing as a detail section (N:1) into lead´s main page. Try with one field first, using the exact syntax provided at samples listed at product documentation.
regards,
Flavio Amorim
Brazil
www.triscal.com.br

[SOLVED:] SLIM not reading slim.conf (no password auto-focus)

Yesterday I began having issues with SLIM. I'm not sure if they're related, but while running Puppy , I inadvertently deleted the desktop icon for my Arch home directory on /dev/sda8. I rebooted Puppy and it reappeared. After running Puppy, something went wrong with my clocks (system and hardware) and the times were all wrong. I fixed that with NTPD. I currently dual boot Arch and Windows 7 from the hard drive, and occasionally from a USB stick, Puppy Linux. I'm using an ASUS K50IJ laptop. I run Xfce4. I do not have any disk encryption enabled.
When I boot up, the SLIM login appears as normal, but rather than password auto-focus, I'm prompted for a username. If I enter the username and hit return, I'm still staring at the username prompt. After three or four iterations of entering a username + enter, I finally get a password prompt and can log in.
I have tried:
1. Reinstalling archlinux-themes-slim
2. Uninstalling archlinux-themes-slim and slim, then reinstalling slim
3. Removing old Xfce4 & Xfwm sessions
4. Removing slim.conf and entering a pristine version.
5. Reviewing /var/log/slim.log files for oddities. I found one:
Before the trouble started, I the message in the log was:
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.32-1-lts x86_64
Current Operating System: Linux asus 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:5
9:47 CEST 2012 x86_64
Kernel command line: root=/dev/sda4 ro
Build Date: 30 May 2012 07:24:13PM
Current version of pixman: 0.26.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 8 15:30:48 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
/usr/bin/xauth: file /home/rasteenb/.Xauthority does not exist
/usr/bin/startxfce4: X server already running on display :0.0
Now I get:
slim: waiting for X server to begin accepting connections.slim: unexpected signal 15
slim: waiting for X server to begin accepting connections.
slim: System is booting up.
slim: pam_authentication(): Authentication failure
slim: System is booting up.
slim: pam_authentication(): Authentication failure
slim: System is booting up.
slim: pam_authentication(): Authentication failure
slim: System is booting up.
slim: pam_authentication(): Authentication failure
slim: System is booting up.
slim: pam_authentication(): Authentication failure
Now I'm stumped.
Rob
Last edited by rasteenb (2012-07-17 11:16:03)

I solved this - slim was not the last daemon I started in rc.conf. By moving it to the end, I get password auto-focus and everything works.
Now my rc.conf looks like
# DAEMONS
DAEMONS=(syslog-ng dbus acpid @network @wicd @openntpd @cupsd @crond slim)
I found this recommendation in the Display Manager wiki page while researching the problem:
Ensure you start the display manager last in the DAEMONS array, otherwise X will later allocate a tty device which was previously claimed by Getty (see /etc/inittab). Not placing the display manager at the end can cause X crashes, and is therefore unsupported.
I'd just been lucky before that there wasn't a conflict.
There is a "flicker" during login where I'm shown the XFCE splash, then the SLIM splash again, then the XFCE desktop. Not sure what's going on there, but it's no big deal.
Cheers,
Rob

HT201359 I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

Use the Report a Problem link in the emailed receipt.

PROBLEM WITH AUTO POPULATE IN THE GOOGLE SEARCH BOX

When I type in the google search box it auto populates search terms as it always has. However since upgrading to FF4 when I click on the one I want to go to ... nothing happens. I have to type the full search every time. I don't see this issue anywhere in the forum, am I the only one having this problem?

How Firefox is opened should not matter.
It could be the work of one of your add-ons, or even add / mal-ware.
Open your '''Add-ons Manager <Control><Shift > A''' and make sure you
know what each one is and what it does.
Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
Also, check the programs that are on your computer
'''Windows:''' Start > Control Panel > Uninstall Programs.
'''Mac:''' Open the "Applications" folder.
'''Linux:''' Check your user manual.
Go thru the list. If you find something that you don't
know what it is, use a web search.
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''' {web link}

Auto populate for fields in ZTable

Hi
I created a Z Table with 10 Fields,Out of those 2 fields are timestamp and Created by.
Timestamp and Created by are made Output only fields in Table Maintenance Generator
SE11> ZTable>Table Maintenance Generator>Environment>Modifications-->Events
Type -5 concatenate sy-datum sy-uzeit into ZTable-Timestamp.
With which when user performs a manual posting in the table and save a record in SM30 the Timestamp is populated automatically.
Similar to these how can i Auto Populate the Created By with the user id (logon id) of the user who made the posting.
I tried to create a new event of type-5 - System is not allowing me to create a event another event of same time
How can i enhance the exisisting event so that i can get Auto Populate of Created By
Thanks in advance

Hi friend,
Put your code which populate user name inside form of event 5 (maybe below your existence code).
regards,

Auto-populate PDF opended in Reader

Do anyone know of a way to Auto-populate a Form PDF created with adobe designer and opended in Adobe Reader. I do not need to save, I just need to Autopopulate the Form fileds and then print.

Autopopulate with what?
Mike

Auto-populate of SHELL_shellName_shell Upper form DE only functions in one single-instance project shell. The DE in the BP Upper Form needs to auto-populate in two separate single-instance shells. How can I get this DE to autopopulate in both?

The Unifier environment
contains two single-instance project shells, INF and PBS, and two multiple-instance child project shells, INFS and
PB. There is a single instance, non-workflow
business process, ‘Project Information’ that contains a data element in the
upper form definition, Project ID. The Project ID is set to auto-populate from the multi-instance “INFS”
project shell attribute, which is populated manually.
Issue: The auto-populate functionality for the
Project ID ‘Shell_shellName_shell’ data element within the single-instance
Project Information BP only functions within one of the shells, either
INFS or PB, but not both. The INF and INFS shells are currently deployed
to production, PB and PBS shell are not.
It is critical that Project ID ‘Shell_shellname_shell’ data element is populated correctly in the
Project Information upper form of both shells, INFS and PB,
because that data element is referenced by multiple business processes and
integrations.
The attribute form definitions for both single and multiple instance project shells are identical. The Project ID utilizes the same data
element ‘SHELL_shellName_shell’ as is defined in both shell attribute forms
(INFS and PB).
The data definition source is a Unifier system-level variable, SYS Shell
Name (String, 128, Text Box)
Potential Solutions:
1. Create a Project ID DE of another data type which can
be successfully auto-populated from either shell. Drawback: all BPs and integrations which
reference Shell_Shellname_shell will need to be rewritten.
2. Investigate converting the Project Information single-instance
to a multi-instance BP, and create a
separate instance for each single-instance shell type. Same Drawback as Option #1, but with additional
rework. Most likely Project Information
would have to be recreated as a new BP.
Not sure that this option would even work.
3. Create a separate Project Information BP for PB. Drawback: Two separate BPs for Project Information would
need to be created. All existing BPs
refer to Project Information, so this option could potentially invalidate the
ability to use the existing BPs in the PB shell.

Was it really necessary to post the whole API description?!?
Locale[] locales = Locale.ENGLISH();ENGLISH is not a method in class Locale, so do not add the braces "( );".
Also, the constant ENGLISH is not an array, but just a single Locale object.
You didn't say what your problem was. What do you want to achieve with your program and what is it that you don't understand?

Auto populate in forms

I'm creating textboxes in a form where multiple users will fill out their contact info. As I fill in the text box the lines below a given column automatically populate with the information above. So if in line 1 I filled out John Smith for name When I began typing for line 2 John Smith would auto populate. I'm not sure because the PDF was created before I started my current job but I think it was a PDF created from a word doc. Any advice would be much appreciated, thanks.

If the field names are the same, this is the behavior that you will get. So if you want to avoid this, simply give the fields unique names.

Auto populate text fields with a trigger such as entering text into input fields in ADF

Hello all,
I am not able to auto populate text fields with a trigger such as entering text into input fields in ADF.
I tried AdfFacesContext.getCurrentInstance().addPartialTarget(val); in the back end using setter method of input text field.
its not working ..
is there any way to achieve it
Regards,
Shakir

Hi,
Always mention your JDev version.
The valueChangeListener would fire only when you set the autoSubmit property of the field to true. Can you elaborate your requirement? What do you mean by related data? Are you performing some sort of search?
If you want to get the value you entered on the field, just set autoSubmit to true and get the new value from the valueChangeListener. If your requirement is something like as and when you type, do something, you need to check out this approach :https://blogs.oracle.com/groundside/entry/auto_reduce_search_sample
-Arun

Cancel password auto-populate

Similar Messages

Maybe you are looking for