Cancel/reverse service entry sheet

Hi Experts,
Please let me know how to cancel/reverse one accepted service entry document.
After revoking acceptance also system is asking for reason for movement. But nowhere I found to enter that against the movement type 102, through the transaction ML81N.
Bye.

Indranil
For me while reversing the Material document in MIGO i got the following error message.
Transaction code MBST (=> use transaction ML81 / ML85) not defined
Message no. ME027
Diagnosis
The SAP transaction code for the function you have selected is not defined in the system table 160.
Can you tell me wht I need to do?
Regrads
Rammohan.

Similar Messages

  • Reverse service entry sheet

    Hi,
    We are involved in implementing Transportation module for an FMCG client, we were trying to show the reverse cycle to the client.
    Service PO has been raised, GR done and service entry sheet generated and has been accepted. Now we want to reverse the whole cycle so we first tried to reverse the GR it gave an error "Transaction code MBST (=> use transaction ML81 / ML85) not defined" so we tried to cancel the service entry sheet first and then the GR.
    I tried to cancel the service entry sheet thru ML81 it gave an error "Not possible to delete already accepted entry sheets" then we went to ML81N to revoke the acceptance but when we enter the purchase order and the service entry sheet number it goes into the display mode and the display- change button is greyed out, when we try to go into the set status all the buttons are greyed out.
    we have all authorization for our ID.
    Can any one of you give a clue.
    Regards
    Godwin

    Hi All,
    Thank you for the contribution, i have got the reply from SAP please read below
    " hello,
    a revoke of the service acceptance created by the shipment cost trans-
    fer to FI/CO is not allowed. The only way to cancel this service entry
    is cancelling the shipment cost transfer.
    To cancel a shipment cost document (SCD) there a two ways:
    (1) Start VI02, enter the SCD number and ENTER
    (2) Select the transferred item, for which you want to cancel the
    transfer
    (3) Scoll to the end of data line in the overview screen
    (4) Set the flag in column 'Cancel' and press ENTER
    (5) Update the cancellation date, if the period (= transfer period) is
    closed already
    (6) Save the SCD
    => The Transfer of the SCD to FI/CO is canceled now
    (1) Start VI02, enter the SCD number and ENTER
    (2) Double click on the transferred item, you want to cancel
    (3) Select tab strip 'Settlement'
    (4) Set the flag in field 'Cancellation' and press ENTER
    (5) Update the 'Date canc.', if the period (= transfer period) is
    closed already
    (6) Save the SCD
    => The Transfer of the SCD to FI/CO is canceled now
    In both cases the used Service Entry Sheet (SES) will be deleted, but
    the Service Purchase Order will remain, even if the PO was created
    automatically by the settlement process of the SCD.
    I hope my explanations help you to clarify this issue.
    If so, would you be so kind and close/confirm this message? "
    Regards
    Godwin

  • Unable to reverse Service entry sheet posted in earlier prds

    Hi All,
    We are unable to reverse the service Entry sheet created via Shipment cost document. As the Shipment cost document was created in the month ofJanuary 2011. And now that period is closed. But I am looking the way wherein by changing the posting date to current month date. So that system should allow me to reverse the cancellation of service Entry sheet
    by ticking the cancellation tick mark under the Settlement Tab.
    I need inputs for reversing it in current month. in the similar lines. as we reverse the service entry sheet in ML81N and have an option to change the Posting date. But in VI02, Date Cancellation field is greyed out and we are unable to tried it out.
    So basicaly how to change the posting date in shipment cost document, sothat cancellation should happen in date which is being entered by user.
    Thanks
    Nitin

    Hello there,
    I had the same problem yesterday and we were able to do the reverse of the ship cost provision and the repost using posting dates from this month. Here is what we did:
    For reversing using a different date.
    Go to VI02, double click on the position, go to "settlement" tab and select "Cancellation" box, then use the menu bar in the "Item" -"Redet. settlement date option" , you will have an information pop up message "Redet. settlement date not possible - account
    already assigned to item" ,  just hit enter and the "date cancellation" field will be now available to modify. Put the date you desire and save.  If you go to the document flow, you will notice the cancellation is done and the posting document is in the FI period you desire.
    To repost the same shipment cost with the new date (current period).
    Go to VI02, double click on the position, go to "settlement" tab , Hit the button "delete account assigment" and the settlement date field will be available for change. Modify the date, save and leave the transaction.
    Enter again and from the menu go to "Item - account assigment", and you will notice the system already redetermine the account assigment, go back (F3) and the "Transfer" field is not available to select and save.
    Then you have the new service acceptance posted with the current period.
    I spend some time and couldn´t find the answer in other websites, now that i have the answer, I hope this help somebody else,
    Rgds,
    Sara

  • Delete/Cance/Reverse  service entry sheet

    Hi,
       Plz help me out in the issue relating to the service entry sheet, where in i have done the service entry & posted invoice document with respect to the service entry sheet.But now my requirement is to delete/cancel/reverse the service entry sheet b'cos we have booked the service expenditure to the wrong account & now i need to make the rectifications for the same & book to the appropriate account.I have reversed the invoice document with  THE TRANSACTION CODE MR8M but iam not able to findout the solution . Plz suggest ....
    Regards,
    Gangadhar Nalluri
    Message was edited by: Gangadhar nalluri

    Hi,
    Now you can reverse or revoke the service entry sheet using tcode ML81n.here click on display<->change button then you will get one button 'Revoke' in appication tool bar.using this button you can reverse service entry sheet.after this you can also delete SES using delete button.When you revoke the service entry sheet all accounting docuements will also be reserved automatically.
    Hope this will helps.
    Regards,
    sunitha.

  • Problem with cancellation of service entry sheet

    Hi guys,
    I am trying to cancel the service entry sheet using ML81N.  Though i have authorisation for ML81N, i am not getting display change button.  Please help me out how to get this display change mode.
    chintu

    Hi ,
    Go to ML81N again .
    Pl check wether MIRO has already been done or not , if it is then you won't be able to cancel it .
    2nd try to unrelease the service sheet and save it . Again open the SS you will be able to see the change button .
    Thanks
    Dipak

  • Facing problem in canceling the service entry sheet

    Everytime i am trying to cancel the service entry sheet following errormessage is being displayed " Error posting acceptance of Entry Sheet 1000009476 Choose (1) Eror Log (2) Save w/o acceptance (3) Exit without saving.
    and when i am choosing error log its showing the following message
    " RC = 3  F5   808 Field WBS element. is a required field for G/L Account 1000 400200"
    Please help me out i will be obliged

    Hi,
    it is due to the WBS and G/L settings,
    just check with your FI concern about the G/L mapping for the account assinment,
    check in OBYC settings for key VBR,
    whether the G/L is mapped or not,
    rgds
    chenna
    Edited by: lakshmi reddy on Oct 22, 2010 9:59 AM

  • Cancel a service entry sheet

    Hello to everyone,
    does anybody know how to cancel a service entry sheet?
    Thanks and Best Regards

    Dear Ignacioh,
    It depends at which level your service entry sheet is at.
    Is it at created stage? or the Acceptance was already done?
    If it is at created stage, heres what you need to do.
    1) Go to ML81N
    2) Click on change mode, and then click on the deletion indicator (looks like a rubbish bin)
    3) Save it
    If it is at Acceptance level,
    1) Go to ML81N
    2) Revoke Acceptance  (If you have release strategy in place, ask the approver to revoke it), by clicking on revoke button (funny looking arrow button).
    3) Save it.
    4) Go back in to change mode and click on the deletion indicator
    5) Save it.

  • Partial cancellation of service entry sheet

    Dear Friends,
    I have created a open Service Purchase Order with Service limits. I have done service entry sheet for quantity (lets say 49) with some value. I have done invoice for 45 quantity only with respect to service entry sheet. Now I came to know that the correct quantity is only 45 and not 49 in numbers. Now I would like to reverse the 4 nos. quantity at service entry sheet level.
    Could you please let me know the correct procedure to solve the above issue.
    Regards,
    Dwarak

    Hi buddy,
    If it is not at the organisation...I mean  at the client side ..
    go to T/c MIR4 give the invoice no..and delete the Invoice first or
    go tto t/c MR8m and Cancel the invoice doc..
    then come back to ML 81n..
    give the SES No..say Revoke acceptance ( there is Invverse Arrow above )...Like a Ancor..
    Once you Revoke acceptance Of Services ...GRN for whole 49 pieces will get cancel..
    know create once again SES by ML81N...include quantity 45 and Proceed for invoicing
    Thanks and Regards
    Adarsh Srivastava

  • Cancelation of service entry sheet created in Pervious Fiscal Year.

    Dear Experts,
    I want to revoke the service entry sheet created against the WBS Element.
    The Service Entry sheet is created and accepted in pervious fiscal year.When the Service entry sheet is revoke it is giving the error for Budget Exceeds. We are having the Investment management activated in our company.
    Kindly  suggest the solution for the reversing the Service entry sheet.

    Dear Rahul,
    If you have done the carry forward then you can change the PO delivery date, make it to current / future date and revoke the service entry. Your budget will be checked in this fiscal year (based on PO delivery date).
    Rregards
    Shubham

  • Cancelling Accepted Service Entry Sheet

    Hi experts,
    Service purchase order was created and service entry sheet was also accepted. After this user has also deleted this PO item. Now, how to cancel this accepted service entry sheet?
    please. help me out
    jay

    Hi
    first remove the deletion flag from the PO line item, Now goto ML81N & enter the service entry sheet whcih needs to be cancelled, Click on Change &
    Click on Entry sheet in the menu bar-.
    Click on Status Revoke Acceptance. & save the Entry sheet
    If you have relase strategy for the Entry sheet first cancel the relase using ML85 & then perform the Revoke acceptance in Ml81N
    Thanks & Regards
    Kishore

  • How to reverse an entry sheet (ML81N) in SAP?

    Hi All,
    colud anyone tell me how to reverse an entry sheet (ML81N) in SAP?
    Thanks
    G.Rossi

    Dear
    please check this link may help u..
    cancel/reverse service entry sheet
    regards,
    Pravin Kadam

  • Service entry sheet reversal document (Status: Error in process) List repor

    Hi,
    I have a requirement, to have or develop report which gives service entry sheet reversal documents (Status: Error in process),
    while investigation i found below options (not exactly meeting my requirement)
    1) Display and Process Confirmations Centrally >Document Category>reverse documents
    which giving all reversed document list (need only error list) and it is giving only my puchasign group list (need all purchasing group list)
    2) I can execute PPB_PD with BUS2203>status>I1019
    is there any way/possible option that i can execute a report of reversal service entry sheets which ststus :error in process"
    Thanks,
    Jai

    Hi Christian,
    Thanks for your reply.
    But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
    Also I have checked the time at which the cancellation was created and everything is in sync.
    How can i change the status of SES from 'Error in process' to 'posted in backend'?
    Please advise
    Thanks

  • How to cancel service entry sheet

    Dear all ,
    Pl explain the process for how to cancel the service entry sheet ?
    Regards

    Hi,
    Go to Tcode ML81 , enter the concerned Service Entry sheet No
    Then Revoke acceptance of service entry sheet (If it is accepted).
    Then save it.
    Then again enter same service entry sheet no in ML81 & delete it.
    hope it helps
    Regards,
    Rahul

  • Cancel Service Entry Sheet

    Hi SAPieessssssss
    I want to cancel my service entry sheet how do i do it

    Hi,
    (a) Go to transaction code ML81N.
    (b) Go to Entry Sheet
    (c) Go to Set Status
    (d) Go to Cancel release
    Hope this info will be useful.
    Bye,
    Muralidhara

  • Service entry sheet - GR Posting Reversal

    hi
    While reversing Service entry sheet (SES), it was been found that the SES quantity and the corrensponding GR ( which was automatically created while posting SES using the same quantity of SES) quantity is not same. ( Actually this is not possible)
    Hence while reversing the SES getting an error PU GR quantity deficit.If I can change the SES quantity then probably I can reverse the SES. also the SES does not allow me to change anything when I put it in change mode - all the fields are grey.
    I guess this is a bug in SAP. can somebody tell me how to solve it.
    Please guide, 
    SACHIN

    Alexandro fozters
    As per the PO history,
    Invoice has not been done for this SES...also this PO is with Acc assig. cat. U and item catagory D

Maybe you are looking for

  • Help needed in SQL statement

    Hi, From the SQL statement below, i need help in explaining what does the line "WHERE ( lims_sys.result.result_template_id = lims_sys.result_template_limit.result_template_id (+))" do? This statement was written by a vendor and now i have problem dis

  • My fiefox seems to have gone to an older vesion for my user only, how do I change it back to the firefox 13 look?

    For some reason, the orange firefox button at the top has disappeared, and my tabs have gone down out of the top bar, I want them back! How do i fix this? I'm not sure when this exactly started, I think I was doing something with addons? Maybe fixing

  • OWA_CONTENT not working.

    Challenge: Need to upload file from PC to the database. I found instructions on how to do this (Metalink doc ID: Note:77573.1) And followed them to the point. Problem: Theoreticaly file from PC should be uploaded into Oracle and placed into OWS_CONTE

  • Duplicate songs under 'Artists' category

    I do not know how this happened with my iPod, but after one of the last times I synced my iPod, some songs under the artist tab were duplicated. I have tried to fix the issue in many different ways. I went to the songs and manually changed the inform

  • Missing Appointments in my Calendar

    I just checked my calendar on my iPhone and about 85% of my appointments are missing. They are also not on my Calendar on my Macbook OR in iCloud. Any ideas??? Help!