Cancel SO after pick release

Dear Expert,
I find out that it is not allowed to cancel SO with 'Pick Confirm/Staged' status. The Problem is: if I desire to cancel that SO, how is the work arround for this situation. And how can I return the stock from staging to original subinventory normally. Is subinventory transfer or move order the best solution?
regards
Indra Stp

Hi Indra,
The process you should follow is to backorder your order line(s). This will release the reservation(s) that pick confirm created against your staged stock.
You can then cancel your order.
The process would be the same if you needed to make an amendment to the order after pick confirm except that you wouldn't necessarily need to move your stock back to stores. In the case of an order cancellation, you're right that you should move back the stock. Whether you do this via a subinv transfer (far the easiest) or a requisition move order is your choice.
Regards,
Jon

Similar Messages

  • How to extract pick details after pick release with OPM Modules

    Hi, Can someone show me how to extract pick details (for third party warehouse) after pick release released in OPM modules?
    I remembered that I can access interface tables MTL_TXN_REQUEST_HEADER and MTL_TXN_REQUEST_LINES to extract pick detail. But it seems that in OPM modules, it does not use these two tables. Any help are greatly appreciated.
    Calvin

    Hi,
    This problem Could happen when you referesh quality or test system.
    Your delta setup for the related master and transaction data needs to be reinit.
    What happens is when you init. the delta and subsequent delta is all maintained in your source system
    please check Notes 852443,424848,834229
    Hope this helps
    Thanks
    Teja
    Message was edited by:
            Teja badugu

  • Cancel Sales Order after Pick release

    1)Is there a way to cancel the Order after it has been pick released.
    2) Is there a way to update the ordr , if the Order status is 'Closed'
    Thanks

    1) To cancel a sales order after it is pick released, you will have to backorder the lines first. Then you can cancel them
    2) No. That is the reason why in most real world scenarios, the order is closed after a gap of some days(say 30 days) after all the lines are closed.

  • Cancell booking after QM release

    Hello,
    i am not sure if this is the right, but i try it.
    I confirm my production after this it's went to a QM inspection lot. I use the QA16 to make a decision for this material.
    Now after this decision i see that somethings goes wrong with the confirmation.
    Is there a way to bring the material back to the QM lot? So i can cancell my confirmation?
    Thanks for help

    Hi
    Go to QA32 for already made UD. Select it and UD Tab ,change it's UD code to R ( Rejected) under charactertics.Then post the Inspected qty to Blocked Stock.

  • Need to delete / cancel delivery after picking

    Hi,
       In case if delivery picked and PGI has not been done then i need to cancel the delivery. To delete / cancel the delivery i need to undo pickings. Could you suggest me the FM / BAPI to unpick the qtys and cancel the delivery.

    Hi..
    Refer the below thread...
    Re: BAPI's for Delivery
    Hope this helps...
    Regards,
    Chithra

  • Need API Name for PIck Release and Ship Confirm for WMS Module

    Hi All,
    One if my requirement is that Initially I will create Internal Sales Order and send to the other system (legacy) there they do the shipping then they provide the flat file which contains shipping information. Based on the incoming file I will close the order. Here they are using the WMS to process the pick release and ship confirm.
    Can any one please help me how to do pick release and ship confirm by using an API or Interface in WMS. If knows please provide the name of the API's and flow.
    Thanks,
    Prasanna

    For external orders we have a solution on WMS_DEVICE_CONFIRMATION_PUB api.
    may be you have done pick release using this api in WMS enabled organizations. After pick release
    you can use WSH api to do Ship Confirm.
    Anatoly.

  • Unable to pick release the order.......

    Hi!!!!
    I am new to oracle apps,
    I am unable to pick release, the status is showing in shipping transactions is showing as backordered, but the availability of the item is adequate enough.......
    Kindly help..... and advice....
    Regards

    Welcome to the forum.
    This is a common issue. Please search the thread for similar question.
    The following thread lists a lot of culprits
    Backorder although on-hand quantity exists
    Also check the following on metalink
    LINE STATUS 'BACKORDERED' AFTER PICK RELEASE ALTHOUGH SUFFICIENT QUANTITY AVAIL [ID 378240.1]
    FAQ: Troubleshooting Stuck Pick Release and Shipping Transactions [ID 863761.1]
    Reserved Sales Order Lines Getting Backordered While Picking or Shipping [ID 390683.1]
    Hope this helps,
    Sandeep Gandhi

  • Where to find Pick Release Date After Ship Confirm in Order to Cash cycle

    Dear All,
    In Order to Cash cycle how to find Pick Release Date. After performing the Ship Confirm Transaction, how to view when we have performed Pick Release Transaction?
    Thanks in Advance.
    Regards,
    Aditya

    Run the Diagnostic OM order Information report against the order. In the report you can the find the picked date.
    Can I know you are using the transact move order ?
    Thanks

  • Quality Check after launch pick release and before shipment

    Dear All,
    This is our client requirement to have Quality Check after launch pick release and before shipment in order management.Can any one please help in this regard?We are also using process Manufacturing Module?
    Regards
    Naveed

    See if this helps
    A Guide to Oracle Quality: An Oracle White Paper [ID 248331.1]
    Mahendra

  • Sales Order Picking - Pick Release BackOrder Clarification

    Dear All,
    A Small Clarificaiton required in Pick Release process.
    Assume the folllowing scenario
    Item_A - Primary UOM is Each
    Item_A - Stock avl in Subinventory_A - 10 Each
    Item is packed 6 Each into a Packet and sold to Customer
    Now a Sales Order is avl for Item_A (Sales Order Quantity = 2 Packets (Packet is a another UOM under the same UOM class))
    Picking happens is Base UOM, so system picks Item_A in Each,when I run Pick Release.
    So, now 10 Nos are picked confirmed and 2 Nos are backordered now.
    But ,since I am selling it in packets, I want 6 Nos to be Pick Confirmed and remaining 4 Nos to be backordered
    How to do this ?
    I have tried with AutoPacking & Container fill percentages, but unable to achieve the same.
    Any help is highly appreciated.
    Thanks
    Karthi Sankar!

    1) To cancel a sales order after it is pick released, you will have to backorder the lines first. Then you can cancel them
    2) No. That is the reason why in most real world scenarios, the order is closed after a gap of some days(say 30 days) after all the lines are closed.

  • Pick Release event

    Hi All,
    I am responsible for a customization in which I need to send a message whenever a line is pick released. I have used the event oracle.apps.wsh.delivery.pik.pickinitiated as the triggering point. However, the issue is that its triggering even for the lines which have been backordered. I found another event oracle.apps.wsh.delivery.gen.create , but not sure if thats the right one. Please help me if I can somehow block the backordered lines from triggering.

    Hello Mozzie555,
    Thank you for your interest in purchasing Dark Souls II from Best Buy!  I'll be happy to answer your questions today.  
    If you pre-order the game online for in-store pickup you should expect that they will have it waiting for you as long as you are there within 8 days of the release.  After that time the order will be cancelled and you will be refunded to your method of payment.
    Best Buy will typically allow for purchase of other gaming-related items during a midnight game release, but you may wish to check with your local store for any guidelines specific to their location if this is something that would interest you.  Follow the link below to find the midnight store list.
    Titanfall at Best Buy
    Thanks,
    Mike|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Restriction of revoke after final release

    Hi experts,
    After final release of purchasing document lets say PR or PO user should not be able to revoke it.
    Any suggestions highly appreciated apart from getting it done  through user exit.
    Regards,
    Maverick

    Dear Ramesh,
    Thanks for your response.
    I have already set changeability to 1 but my concern is after PR final approval if a PO is created with its reference then in this PR user should not be able to revoke or cancel an approval.
    I think we can do this with user exit but is there any other alternative?
    regards,
    Maverick
    Edited by: Maverick 331 on Jun 16, 2009 1:00 PM

  • How to find Pick Release Date in O2C Cycle

    Dera All,
    How to find Pick Release date in Order to Cash cylec after we perform the ship confirm Transaction.
    Please advice me as its a requirement from my customer. Pick Release date should come in Report.
    Regards,
    Aditya

    Run the Diagnostic OM order Information report against the order. In the report you can the find the picked date.
    Can I know you are using the transact move order ?
    Thanks

  • Pick Release fails with APP-18237 Error. Invalid quantity

    Hi,
    I am trying to Pick Releae a Sales Order Line, the line is having Scheduled Status ='Reserved'
    But, while pick releasing it shows below error message:
    Picking Line: 217753 Detail: 190168 Item: 2
    Transactable: Y Reservable: Y
    Requested Quantity: 5
    Autodetailed Quantity: 0
    Available to Reserve: 0
    Error Code: 8
    Message:
    APP-18237 Error. Invalid quantity
    Can anyone explain, when or how a Sales Order line with Reserved Status, will show the above error?
    Thanks,
    Gowri

    Please see if the following docs help.
    Pick Release Error: 'Could not Create Move Order Line for Delivery Detail'. (Doc ID 748927.1)
    Cannot Pick Release Non-Inventory OPM Items In R12 (Doc ID 1481238.1)
    Pick Slip Report Complete With Null Value After Release Sales Order (Doc ID 1362175.1)
    If none of the above helps, you may log a SR.
    Thanks,
    Hussein

  • R12.1.3 - Pick release for batches completing in error during upgrade

    Hi,
    We are upgrading from 11.5.9 to 12.1.3.  Pick release for batches fails with the following error message in log file.
    The delivery lines given in the log file all have sub-inventory restricted items. We don't use WMS.
    Any help/pointers greatly appreciated!
    Scenario:
    =======
    Batch pick release performed for sub-inventory "A". The program "Pick Selection List Generation" fails with the following error message.
    Items on the failed delivery lines are sub-inventory restricted and assigned to sub-inventories "B", "C" & "D".
    Error Message:
    ============
    Could not Create Move Order Line for Delivery Detail XXXXX
    Delete Line 9.990000000000000000000000000000000000000000000000000000000000000000
    000000000000000000000000000E+125
    Error occurred in Inv_Pick_Release_Pub.Pick_Release
    ORA-22160: element at index [32] does not exist in Package INV_Pick_Release_PUB
    Procedure Pick_Release
    Unexpected error from INV_Pick_Release_Pub.Pick_Release. Exiting
    SQLCODE: 1 SQLERRM: User-Defined Exception
    Exception occurred in WSH_PICK_LIST.Release_Batch_Sub
    Error occurred in Release_Batch_Sub
    SQLCODE: 1 SQLERRM: User-Defined Exception
    Exception occurred in WSH_PICK_LIST
    Thanks,
    Renganayaki S

    Please see if the following docs help.
    Pick Release Error: 'Could not Create Move Order Line for Delivery Detail'. (Doc ID 748927.1)
    Cannot Pick Release Non-Inventory OPM Items In R12 (Doc ID 1481238.1)
    Pick Slip Report Complete With Null Value After Release Sales Order (Doc ID 1362175.1)
    If none of the above helps, you may log a SR.
    Thanks,
    Hussein

Maybe you are looking for

  • Iphoto won't open after upgrading to mavericks

    I just bought my macbook air from a pawn store a few days ago. I just got the OS X upgrade to finish after upgrading itunes, iphoto, safari, etc. Now when I tried to open iPhoto it said I need to upgrade. When I go to the App Store and click update a

  • Trigger a Workflow when a date is reached in SharePoint Online

    I have created a simple list workflow (SharePoint Online) which emails a user, informing them a Document's Target Closure Date has been reached. The workflow works fine when started manually. I want to trigger the workflow only when Target Closure Da

  • ITunes+Quicktime install crashes - no error

    Ok, I'm not the only one having this problem, but I've tried the solutions provided and none of them have accomplished anything. Basically I run the iTunes/QT installer, it appears to run through just fine. At the end it uninstalls/deletes iTunes. Sy

  • Ejb compilation error

    I am trying to compile the following sample code. Compilation error message is ShoppingCartBean.java:2: cannot find symbol symbol: class EJB location package javax.annotation import java.util.HashMap; import javax.annotation.EJB; import javax.ejb.Rem

  • Strange over exposure

    Can anyone help with this problem because I'm really stumped! I'm using Lightroom 5.7 on a Windows 7 laptop & not had any problems up until now but images in Develop mode show large red areas as though they are over exposed (see screen shot). The sam