Cancel the release and change the z segment in new version.

Hi,
I have a Z segment created in 4.6c.
Now we have upgraded to ECC  and i want to change one of the field ( i.e data element of the field ) and I am not able to change it.
It gives me the hard error. I am unable to cancel the relase and do the modication.
If I try to add a version it doesnt accept it with out any additonal fields.
I have tried deleting the segemnt in Basic type and tried deleting the whole segemnt, but it doesn accept this way too.
Any ideas how to go about it?
Thanks,
Krishna.

Hello,
I had a similar problem when I tried to delete fields from a segment. I also wasn't able to cancel the release of the segment and the release of the extended idoc type.
The reason seems to be that the idoc extension and the segment have been set to "released" in a lower release version of the sap-system.
I was able to edit the segment when I changed the corresponding table entry in EDISDEF and set the release to the current one. However that is no solution I would like to propose.
Anyway the problem could have something to do with the release of the the sap-system. In this case I would be glad if someone could offer a solution which is more close to the standard than editing the system tables directly.

Similar Messages

  • I want to cancel my subscription and change to the photographer plan, how do I do this? I tried to call you but it is impossible, chat is impossible as well . If I would not obtain answer for you, I will  have no  choice to cancell my suscription

    I want to cancel my subscription and change to the photographer plan, how do I do this?
    I tried to call you but it is impossible, chat is impossible as well . If I would not obtain answer for you, I will  have no  choice to cancell my suscription.
    Thanks in advance

    You need to cancel the present CC (in case of repurchase the cancellation fee can be waived off) & repurchase the plan that you want.
    Please let me know if you would like to go for cancellation of the present CC via personal messaging.
    Regards
    Rajshree

  • HT1338 I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2?

    I cannot access my iphoto application on my imac as it says I have made changes in Iphoto using a newer version. We have recently purchased a Macbook Air and this has Lion (as opposed to leopard on the iMac) and we are sharing photos between the 2.  I am awaiting the upgrade discs for snow leopard and then to Lion for the iMac but is there a way to access my photos until this arrives?

    Do a malware check with several malware scanning programs on the Windows computer.
    Please scan with all programs because each program detects different malware.
    All these programs have free versions.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *AdwCleaner:<br>http://www.bleepingcomputer.com/download/adwcleaner/<br>http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender:<br>http://windows.microsoft.com/en-us/windows/using-defender
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *Anti-rootkit utility TDSSKiller:<br>http://support.kaspersky.com/5350?el=88446
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • When I try to open a spreadsheet on my Mac that I worked on with my iPhone, I get "You need a newer version of Numbers to open this spreadsheet." When I go to the App store, it says I already have it. I have v. 2.3 and can't seem to download newer version

    When I try to open a spreadsheet on my Mac that I worked on with my iPhone, I get "You need a newer version of Numbers to open this spreadsheet." When I go to the App store, it says I already have it. I have v. 2.3 and can't seem to download newer version.

    If you are running Mavericks, and the Mac App store says you are up to date, then you have Numbers 3.2 as well as Numbers 2.3. You are getting the "Need a newer version message because your Mac is trying to open the document using Numbers 2.3.
    Launch Numbers 3, then open the document from within that app, or right click/control-click the document and choose Open with Numbers 3.x.
    Regards,
    Barry

  • I downloaded the iOs 7, then went to sync it with my computer but it said I needed to update my iTunes, so I went to download it and it said I needed a newer version? 10.6 or something? And so now I can't sync my phone... Any suggestions?

    I downloaded the iOs 7, after went to sync it with my computer but it said I needed to update my iTunes, so I went to download the 11.1 and it said I needed a newer version? 10.6 (or something like that)
    And so now I can't sync my phone...
    Any suggestions? Besides throwing my computer out!! haha
    My macbook is older.. bought in.. 2009. So I realize things may not work exactly the same.

       Yeah really!
       One thing depends upon the other then nothing works or is no longer compatible. 
       I don't blame ya for wantin' to throw your computer out! Ha-Ha! 

  • I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

    I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

    I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
    There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
    Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

  • Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?

    downloaded new version but I keep getting error message with download.
    What does the error message say, andrea? (Precise text, please.)

  • The software on the iPhone has expired and must be upgraded to a newer version

    Been using my iPhone 4 for days with iOS 5.  Got off a call and not it wants be to reactivate for some reason.  so I go to iTunes to reactivate.  It says the "The software on the iPhone has expired and must be upgraded to a newer version" so I click the update button in iTunes and it says it's up to date but still can't activate.  HELP!!!!!

    That's because you put a Beta version of iOS 5.0 on your phone. All the iOS 5.0 betas have expired. You'll have to restore your phone in iTunes to re-activate it.

  • The app messenger was not installed because the ipod needs a new version but i'm just updated to the last verison.What i do?

    The app messenger was not installed because the ipod needs a new version but i'm just updated to the last verison.What i do?

    What model iPod do you have and what iOS is on the iPod?
    What is the specific app?
    If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • Upgrading from 4.7 to ECC 6.0 And GTS 2.0 to a newer version

    Hi everyone,
    I am new to SAP SD, I am involved in upgrading from R/3 4.7 to ecc 6.0 and GTS 2.0 to a newer version. Can somebody tell me the major differences in these two vesions and also some link through which I can get some info. It is very urgent.
    Thanks.

    Dear Paranidharan Gandhi,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP
    ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target
    Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word
    document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

    So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct?  Where do you look, or what do you do, that indicates the playlists are in alphabetical order?  Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
    If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe. 
    The 3rd gen shuffle uses VoiceOver.  If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details).  When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
    There are more details in the manual for the 3rd gen shuffle, which is online here
    http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
    See page 22 for the section about setting up and using VoiceOver.  The part about switching playlists starts on page 23 (Using the Playlist Menu).

  • I just updated to OSX and keep getting notifications to download new versions of Pages, Keynote and Numbers, would these be free?

    I just updated to OSX and keep getting notifications to download new versions of Pages, Keynote and Numbers, would these be free?

    Normally, that would be excellent advice. But in this case it is not thought to be necessary.
    The new copies will be installed "loose" in the Applications folder. The originals are kept in the iWork folder in the Applications folder. If you do not like the new versions, they can be discarded and the original versions will be used again.
    The new versions have many new  iCloud features, but some users have complained that key features they require are missing. It is thought that Apple will add them over time.

  • I own a Verizon account with both myself and my friend on the account. My contract is up but his is not, and we both have similar phones (S3 and S4). Would it be possible to cancel his plan and change my contract end date to be his end date to compensate?

    I'm trying to find the best/cheapest way to drop my friend from my plan. Thanks!

    Contracts are tied to a number at Verizon. Verizon doesn't allow people out of contracts without an ETF, nor should they.
    If you want to only have 1 line on your account and don't want to pay an ETF, you will have to cancel your line and take over your friend's number. No, it's not ideal, but neither is you being responsible for your friend's line.

  • Cancel the creation of a new record from a tree-form

    Hi all,
    We have an application with a tree-form interface. On the form is an option to create a new object (e.g. Employee, as an analogy). We would like to provide a way to cancel the creation and return to the previous selected node/employee; e.g. with a cancel button.
    How can we accomplish that?
    We tried to use the standard bindings rollback as an actionListener (#{bindings.Rolback.execute}), but this doesn't work as expected. The employee on the form is not the same as the selected one in the tree, but always the first one. After deep investigations it seems that the synchronization mthod
    JhsPageLifecycle.restoreRowCurrencies tries the synchronization with the (now obsolete) key of the new record.
    This gives the impression that rollback can be used to rollback changes on existing objects, but not to rollback the creation of a new record. So we're looking for another approach; any suggestions?
    Ciao
    Aino

    Hi,
    problem does not seem to be solved after all :-(
    As I wrote in the first post, the rollback tries to synchronize, using the id of the new row (that we retrieve from a database sequence when the viewrow is created).
    Any suggestion how we can synchronize with the 'selected' row?
    The strange thing is that it seems to work when we create a 'subordinate' (like create an employee from a department page), but it does not work when we create the same object (like a department from a department page).
    Ciao
    Aino

  • How to know enhancements in the JDK when a new version is released?

    Hello:
    Java is releasing new versions of its JDK frequently. So, I would like to know what new features bring each version of JDK. I mean, I've just found this page: [http://java.sun.com/j2se/1.5.0/docs/guide/language/]. This page has documentation about enhancements in JDK 5 and also some examples of this enhancements.
    However, I didn't find a page which can show me the enhancements in JDK 6. I mean, Java will continue releasing new versions of JDKs in the future. My question is, how a java programmer can update his knowledge about new features that will bring future versions of JDKs?. Is there any subscription or something like that in order to get notifyed and be able to learn what's new on every new version of JDKs?.
    Thanks for your answer.
    Bye.

    A quick google search turned up [this page|http://java.sun.com/javase/6/webnotes/features.html], which seems to have it all.
    Note that there is no direct equivalent to the page you linked to (language changes), because Java 6 didn't have any major changes in the Java language, while Java 5 introduced quite a few of those (generics, enum, annotations, ...).

Maybe you are looking for