Cancel use of Passwords on Blackberry 9800

Any time I cancel the use of a Password on the 9800, the phone is asking for a new password, I don't want to use any Password on the phone, I need Help an what I can do to eliminated the use of passwords on the phone.
Any Help on what I can do. Will be a big help
Thank very much.

I read what you wrote, but it doesn't make sense. You have to enter the password when you select the option to disable the password. Is that what you are in fact seeing.
The only other thing I can think of is IT policy, but from what I know that would lock the password setting to enabled and you wouldn't be able to disable it period.
If the above isn't relevant, see what others say.
- Ira

Similar Messages

Update Apn data setting for BlackBerry 9800 torch.

How can I update my Apn data setting on the BlackBerry 9800 torch? Because I am on the AT&T pay as you go plan, but on the pay as you go plan the phone as no mobile network but I have to use the wi-fI because on the 50$ unlimited plan is only talk and text, so I am trying to go to net 10 because unlimited talk and text and web and I have the unlocked code so I can take it over to net to but I when net 10 web page and they say I need to Updated the Apn data setting that the phone will work right, can someone help me, even if I have to someone besides net 10, just so the phone works at 100%.
Solved!
Go to Solution.

Hello!
Here is a KB with instructions:
KB05327 How to set the APN settings on the BlackBerry smartphone
Hopefully it contains something useful!
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

HT5847 I have a blackberry 9800 and a macbook pro OS Mavericks 10.9.2. I want to sync my notes, contacts. Please help.

I have a blackberry 9800 and a macbook pro OS Mavericks 10.9.2. I want to sync my notes, contacts. Please help.

Try syncmate 5 expert http://www.macupdate.com/app/mac/26317/syncmate-expert
BB desktop software uses syncservices which is no longer in Mavericks.
BB Link should work but not on your phone.

Blackberry 9800 blank screen

My newly purchased Blackberry 9800 has just gone blank. I'm so sure it's not a battery problem because I have tried other batteries. It just happened abruptly. There was no physical damage to the device. The device, fully charged has been on, and when I tried making a call later in the day, I found a blank screen. When I did a hard reset, the screen remained blank with the indicator light beaming red for a few seconds, and then flashes red light four times at rhythmic interval. Please, what is the issue and how can it be quickly resolved?

Hi don7g,
Do you have access to a computer with the BlackBerry® Desktop Software installed? If so, is the BlackBerry® Desktop Software able to connect with your BlackBerry® smartphone?
If it is, please try to back up your data using the BlackBerry® Desktop Software and perform a clean reload of your BlackBerry® Device Software.
For further instructions, please see the following KB articles.
For Windows® "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Please test to make sure the issue has been resolved before restoring any data from your backup file.
If the BlackBerry® Desktop Software is unable to connect with your BlackBerry® smartphone, I would advise trying to force a detection by starting a BlackBerry® Device Software reload without your battery inserted. For further steps, please see the following KB articles:
For Windows® : "How to force the detection of the BlackBerry smartphone using Application Loader" http://bbry.lv/IAfXWd
For Mac: "Unable to application load a BlackBerry smartphone showing JVM 507 or JVM 513 using BlackBerry Desktop Software" http://bbry.lv/J0V8BH
Please note that the last process will remove all data from your BlackBerry® smartphone.
Since it is not detected by your computer, you will not be able to backup your data first. If you have a previously taken backup file, you can restore your data from that backup.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

My blackberry 9800 has 0 mep attempt left

good day,please i have a blackberry 9800 and its at&t, i traveled
abroad to visit one of my cousin,so i wanted to use a new sim in
it,and its asking me for a mep code,i dont know what it is so i
dropped it,my cousin has entered a wrong code now its saying 0 attempt
left.what can i do to it please.please let me know what i can
do.because i really need to make some calls.

See this thread:
http://supportforums.blackberry.com/t5/BlackBerry-Bold/Blackberry-Torch-9800-0mep-attempts-Locked-fo...
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Blackberry 9800 touch smart phone

I have recently purchased a new Blackberry 9800 touch smart phone and I am unable to connect to the internet, it tells me I need an Enterprise password, how do I get this, because it seam like I can't send emails or seach the internet until I activate my phone. where would I fine this activation password?
it say's when I try to email, activate your enterprise account,enter details provided by your system administrator.
So, what dose this mean? I haven't got a clue. Help!!!

That message will appear for one of two reasons. One, the phone has an IT policy on it or two, you don't have a proper BIS (BlackBerry Internet Service) data plan with Vodafone.
If you don't have a BIS plan with Vodafone, you'll have to give them a ring to activate such a plan if you wish to fully appreciate your BlackBerry. If you do have BIS with them, then you'll need to do a security wipe of the phone to remove the IT policy. This can be done by going to your homescreen and following Options>Security>Security Wipe or Options>Device>Security>Security Wipe, depending on which OS your phone is running.
I hope that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

SatNav application for BlackBerry 9800 Torch

Hi,
I hope you will be able to help me.
I have a BlackBerry 9800 Torch and I would like to install a SatNav.
I have seen many navigation applications via the BlackBerry App World website but none off them seem to be very good!
My network provider is Vodafone UK and when I had my Storm 9500 I had the Vodafone Find & Go application (Find & Go is a branded Telmap Navigator application) installed which was a fantastic SatNav. I then bought the Storm2 9520, however, the Find & Go application was not compatible with the Storm2 which was very disappointing.
I have now purchased the BlackBerry 9800 Torch and would like a SatNav application. I have spoken to Vodafone and they have informed me that the Find & Go application is not compatible with the 9800 and as far as they know there are no plans to make the Find & Go application available for the 9800. Vodafone suggested downloading the Telmap Navigator from Telmap which is what BlackBerry use.
I have been on the Telmap website but the Telmap navigator is not available for the BB 9800...which again is very disappointing.
I am a little disappointed and I would have thought that with a SatNav application as good as Telmap Navigator, that has been available to pretty much ever other BlackBerry device, would be available for the BB 9800 Torch as it is the BlackBerry benchmark device.
Could anyone please tell me if Telmap Navigator UK & Ireland is available and compatible for the BlackBerry 9800 Torch?
If not, is it likely to be available for the BlackBerry 9800 Torch and when?
Or, because the other SatNav applications on BB App World are not very good...can BlackBerry suggest a alternative SatNav that is as good as Telmap that is available for the BlackBerry 9800 Torch?
Thank you
Pete

Hi Pete
I couldn't agree with you more.
No sat nav on the torch is a definite turn off. I had a 9700 previously and had telenav running on it (£5.00 per month on your phone bill) but they tell me that they aren't building a version that will support the torch because their main contact in the UK is T-mobile and (they say) T-mobile aren't supporting the torch. Telenav are the company that produce ATT navigator for the states which is basically just a branded version of Telenav. AT&T navigator is available in the states...
I'm not too fussy, tomtom, copilot, navigon, garmin...someone take my money and supply me with a sat nav app please!
Andrew

Blackberry 9800 Torch not starting up or entering Safe mode

Hi all,
I am owner of a Blackberry 9800 Torch for about a year and now it does not startup. I turned the phone off last night and this morning it does not start up. I didn't make any changes to the phone so very strange.
The behaviour is that when I take the battery out and it turns on, the load screen start but the little white line only starts a little(2mm line) and then it restarts and does the same thing and loop over and over again in this till battery runs out.
I have tired to enter Safe mode by holding in the Escape bottom when the load screen starts or when the red light turn off but it does not enter Safe mode.
Please can anybody advise how I can fix this?
Thanks in advance,
Stefan

Are you able to restart your device in safe mode as shown in KB17877?
I assume, since it's caught in a reboot cycle, when you connect to the Desktop Software it doesn't take a stable connection to reinstall your software?
If that is case, remove your battery and keep it out when you connect to the Desktop Software. You will get a pop up that the device can't connect and there should be Retry, Update and Cancel buttons. Select Update and you will then be able to reinstall the current device software version.
When the load is progressing, you will see a step that says "Wait for device initialization". At this point, insert the battery and the reload should complete.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How can I use ONE password that serves to open up multiple mozilla functions instead of entering & reentering password?

Firefox just reset itself. Before that, I could enter a safety site, type in 1 password, and thereafter have my username and gmail password automatically display in yellow - saving my entering those two items each time. Since the Firefox reset, I can't figure out how to reset Firefox or Google or whoever it is to do what it used to do. Thanks

Hello ericmorrel, see : [https://support.mozilla.org/en-US/kb/password-manager-remember-delete-change-passwords Password manager - Remember, delete and change saved passwords in Firefox]
see also : [https://support.mozilla.org/en-US/kb/use-master-password-protect-stored-logins Use a Master Password to protect stored logins and passwords]
thank you

JCOerror: This system does not let you log on using a password

Hi,
"JCOerror: This system does not let you log on using a password"
This is the error message I get from MII tries to connect to the Production ECC using my credentials to perform a BAPI call.
These credentials work fine interactively (using the SAP GUI) and for BAPI calls from MII on SAP Development instances.
I can interpret this message in two ways:
- My login can not log on using password (though I can interactively)
- The server does not allow logging on using password only. (It might require to pre-authorize the connecting server as well).
I guess my question can be if this error requires adding additional rights to my login for the production environment, or if this is a global SAP setup for this system? Or something else?
In either way, what is required to have this work?
Thanks.

Hi,
Kindly try the following options.
Try executing the BAPI seperately in se37, using your login credentials.
Check whether RFC is enabled for the BAPI.
Check whether the SAP server is details are furnished correctly in "SAP Server"(available under "Data Services") editor.
We can ensure this by checking the connection status link in xMII.(Link is available under "Data Services").
If connection status is "Running" then SAP server setting configuration is fine. Else it is not configured properly.
Try executing the BAPI in BLS(Business Logic Services) using JCO connector.
I believe if any one of these scenarios fail then "Proxy Error" might thrown.
Thanks
Rajesh Sivaprakasam

This system does not let you log on using a password

hi all, i am very new to sap basis. i have changed the below profile parameters in RZ10.
login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
after changing values i restarted the Instance. But the problem is when i am trying to login to the system it is showing an error message : "This system does not let you log on using a password". I know why this error occurs...
but how to resolve this error? plz Help.
Thanks in advance

login/min_password_length=3
login/min_password_lowercase=1
login/min_password_uppercase=1
login/min_password_digits=2
login/min_password_specials=1
The correct parameter for Min password Lenght is login/min_password_lng.
You can change this at OS level restart and see how it goes...
Regards
Juan

Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
if you are to do this please back up first with Time Machine. You can do this with a usb drive.
Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
once it is open go to the top of the window and put your email address that you are having problems with.
once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
right click and delete them. make sure not to touch any other files that dont say them things on them.
Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
Hope this helps. if something is not clear just ask.

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is!

I'm installing the new OS and iPhone is asking for a password to "restore" my iPhone, but I've never used a password for the phone and don't know what it is! Can anyone help??

You selected Encrypt iPhone Backups in iTunes. Then you entered a password.
It would be that specific password it is asking for.
See here:
https://discussions.apple.com/thread/3284065?start=0&tstart=0

HT204053 I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

I cannot use the password to update apps on my second IPhone. It only works on one of the phones. They both have the same Apple ID and password.

If it really does not work, change your password here https://appleid.apple.com (Manage account) and try to add the account again. I hope it helps.

I have two iPads and giving one to my grandson. Using my Apple id for both, can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

I have two iPads and giving 1st gen. to my grandson. Using my Apple idI for both... can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.

Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Cancel use of Passwords on Blackberry 9800

Similar Messages

Maybe you are looking for