Cancel Vendor excise invoice

Dear All,
we need to cancel the vendor excise invoice which is captured and posted by J1IEX.
till now we have made GRN and captured and posted the excise invoice against the GRN but due to wrong entries in value field we need to cancel the posted invoice and recapture and post the excise invoice
so please guide me how do it for following conditions.
1) if i want to make complete cancellation and new posting against same GRN
2) if i want to post only some adjustment posting for correction
Regards,
Vimlesh

Hi
1. For adjustment you can use Excise JV - Tcode J1IH
Use this if there was error in amount of excise posted - Here Additional exicse means u enter more amount and other adj means you reduce amount
2. If you want to cancel the excise invoice and redo whole process then
   In MIGO cancel the GRN ....
Case 1 .. if part 2 posted
   goto J1IEX .. again post same vendor excise invoice to reverse the credit
   Now in J1IEX cancel the same vendor excise invoice and ...redo whole process
Case2 .. if part 2 not posted
go to J1IEX and cancel the vendor excise invoice ...... redo whole proces from GRN till part2

Similar Messages

Cancellation of Vendor excise invoice

Dear all
Is it possible to cancel Vendor excise invoice without reversing GR(Only Part 1 posted)? .
If it is possible how we can do ?. Please suggest.
Thanks and regards
Srinivas.

Hi,
Without canceling the Material document number you cann;t cancel the Vendor excise invoice/Internal excise invoice number.
If you cancel the Vendor excise invoice it will voilate the excise data.You need to reverse the GR document then you can cancel the Vendor excise invoice.
rgds
Chidanand

CANCEL OF VENDOR EXCISE INVOICE

hello everyone,
i have cancelled a GR with movt. type 102.
now i want to cancel d vendor excise.
for that when i am using t/code j1iex,selecting post,simulating CENVAT and while trying to post CENVAT it is giving error ACCOUNTING DOCUMENT NOT GENERATED.
ps help me to solve this problem.
regards,
indranil

Hello Indranil
1. Plz check ur path
J1IEX => Post => Internal Excise Invoice (Here u can enter int. invoice generated by system) = Execute.
Also plz check following steps :
1. GR rect (101)
2. J1IEX (Post invoice note down int. invoice no.)
3. Cancel GR (102)
4. J1IEX (Cancel Int. excise invoice)
Hope this help u.
Nilesh

Reverse the material document before cancelling the excise invoice.

Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINI

Hello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman

Error while posting Vendor Excise Invoice

Hi
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 18.16' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Kindly give the solution
Regards
Pratap

Hi all,
There is no excess amount in the transaction.
IN Po Excise value@8%: 1,815.88
Ecess@ 2% on EXcise:36.32
HecesL:1%: 18.16
This is how it is.
Before this i have posted one thread on Part I does Not Exist, based on this i was in the forum and i found in one thread to cancel the GR and cancel the Excise Invoice if Part II has not been posted.
When i have done this it has given me one message that Reverse the availed Cenvat Credit - basing on this i am trying to post Vendor Excise Invoice and then i have to cancel the Internal Invoice.
This is what i have done.
So kindly let me know where i am wrong.
Regards
Pratap

Problem in Cancellation of Excise invoice

Hi,
User has created Import PO then he made custom MIRO then GR is done and through J1iex part1 is done. later he realized that there is problem with PO condition for that he has first cancelled the GR then secondly cancelled Custom MIRO. now while doing cancellation of excise invoice in j1iex then below error is throwing
Reverse the material document before cancellation of excise invoice.
So after anaysis of PO in that PO histery got found some amount difference of MIGO delivery cost document. hence i guess this will be the reson of cancellation of excise invoice.
So please provide the solution.
Regards
Rahul

Hello,
Cancell the Customes MIRO
Cancel the MIGO , simuteneously system reverse the PART1 also
Then Cancel the excise Invoice , (first capture the excise invoice wrt to reversed GR document and after the cancel the Excise
Invoice wrt Internal doc nor or vendor excise Invoice no)
Reason: before MIGO you are captured the excise Invoice it means that system will updated J_1IEXCDTL table , after MIGO system will updated the GR refference in the above said table, so i,e the reason capture the excise Invoice wrt Reversed GR and check)
Regards
Mahesh Naik

Cancellation of Excise invoice after MIRO

Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindaraj

hi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal

Reversal of Vendor Excise Invoice

Dear Experts,
After Vendor Excise invoice is posted through T-Code J1IEX (part 2 Postings),
How to reverse the posted Document ,(literally speaking we need to reverse the postings made in that transaction similar to Movement 102 for 101)
With regards & thanks in Advance
Sarathy
Edited by: Sarathy on Jul 28, 2009 1:33 PM

Go to J1IEX and post the same excise invoice again as Part1 is captured with respect to this document at 102 issue.
Then go to Cancel mode in J1IEX and cancel the excise invoice.
Only if your registers are not updated.
For vendor return
Excise invoice can be cancelled using J1IS, before do vendor return using movement type 122 and ref doc for 101.
Edited by: Sujoy on Jul 28, 2009 1:38 PM

Reversal of GRN,Vendor Excise Invoice,If QM is active.

Dear Experts,
Please guide me how to reverse the entry if.......
MIGO (Part 1) done
Usage Detail (UD) done/Not done
J1IEX (Part 2) done
MIRO done
I did.....
Created Raw material PO with Cenvatable tax code
MIGO with capture excise invoice
UD for inspection lot
Part 2 posted-J1IEX_P
Update excise register-J2I5
Print excise register-J2I6
MIRO
What i tried for cancellation......
Raised Credit memo
Cancellation of GRN (PART 1)
J1IEX- POST (In this step when i am selecting post and entering vendor excise invoice no.or internal excise invoice no.system is not allowing me to post as it is displaying one message i.e Excise invoice has already been posted for the vendor.
Please guide me where i am missing ,what i will do for inspection lot and is there any other steps to be taken for cancellation of excise entry if QM active.
Regards
Rahul

Hi AKPT,
Thanks for the prompt reply. Actually this is the case of wrong GRN posting.We can do return delivery process by using movment type 122 but when i checked the status of excise invoice in MIGO (More data- Misc.tab) the status is 'POSTED'. How i can convert it into cancel.
OR
If QM active for the material only we have vendor return delivery option or If cancellation option available then how i will follow the steps.As i tried this option but after cancellation of migo when i am posting the excise invoice system is displaying one message i.e Excise invoice has already been posted for the vendor.
Please help me
Regards
Rahul

Cancellation of excise invoice part II entry

can anybody help me about cancellation of excise part II entry
how it is done
i did transaction J1ih for cancellation of excise invoice but it shows error
excise and modvat accout not defined for CEIV transaction and excise group

Dear Sujitkumar Borse,
Pls follow the steps for Cancellation of Excise invoice part II:
Canceling Excise Invoices
T.code:J1ILN
Path:
From the
SAP Easy Access screen, choose
Indirect Taxes - Procurement -Excise Invoice - Incoming Excise Invoices - Individual Processing - Change/Display/Post/Cancel.
In the top line:
1. Select Cancel.
2. Select Vendor Excise Invoice.
3. Enter the excise invoice number.
4. Choose .
5. Save the excise invoice.
With regards,
B.Ravindranath

Archive incoming vendor excise invoices RG23APART1& PART2

Hello Everybody,
I Want to Archive the Incoming vendor excise invoice RG23APART1 and PART2. For PARTI, i have take the J_1I_P1GRX,
but no invoices archived.
so please suggest me any pre-requisite for Archive (In view of MM)
vendor excise invoice RG23APART1 and PART2 and Object for the same
Thanks
Ganesh

Hello SAP Learner ,
As per ur reply ... if there is a 100kg PO qty & in the first GR the recieved qty is 50 , then the credit that we would be able to take would be that of 50 kg only , which the system would prorate & hence subsequently i would post the excise invoice & take the credit for only 50 kg ...
Later if the balance open qty as per PO are cancelled then there is no question of GR & hence credit .
Still the utitity as well as functionality of multiple GR multiple credits is not very clear .
pls do revert bk wid ur valuable inputs
Rgds
Anis

Cancel Posted Excise invoice

Hi friends,
How to cancel posted excise invoice(GR is completed) ?
Regards,
Chetan

Hi friends,
I have already tried it in quality system.
1.After cancellation of GR.I tried to post excise invoice but system showing the messege that No Part I exists for availing credit in excise invoice TEST 1 2007
2.J1IH reverse the entry but system is not showing these entries in excise invoice.
so due to this while entering Vendor invoice in miro system showing tax amount from excise invoice.if reduce tax amount then system showing balance in transaction currency.please suggest me whst to do ?
Regards,
Chetan.

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

Cancel the excise invoice in Intra company stock transfer

Dear Gurus,
I have one issue in CIN.
The following are the my sequence of operation.
Intra company stock transfer.
1. Purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice without purchase order Manually (from plant A),
after PGI and Before MIGO.
7. MIGO.
Now i want to cancel the Excise invoice in Plant A.
how can i cancel the excise invoice.?
kindly provide the valid information.
Thanks.
Best Regards
Anbu

In T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
Here it is possible to cancel the Excise Invoice.
Regards,
Rajesh Banka

Cancel the Excise Invoice.

Hi,
I created the Billing document and Excise Invoice. When i went to the Document flow in the Billing Document I found the Accounting document of the Excise Invoice and its status is Cleared.
After that I Cancelled the Excise Invoice. And again I checked the Document flow in the Billing document. But the status is showing the same.i.e Cleared.
Wt it mean..is it correct?
regards,
jyothi.

It is correct. the cancellation of excise invoice wont affect the document flow of sales document. For status go to J1ip enter the invoice no or billing doc and enter. here u can see reversed in the status.
Hope it clarifies ur doubt.
anya

Cancel Vendor excise invoice

Similar Messages

Maybe you are looking for