Cancel vendor open item
hi, i have wrongly created raw meterial a/c under current liabilities group insteadof current asset and also posted in f-43 . i want to cancel that open item and create that open item under current asset group
Hi Anitha,
Here you have 2 level of issues one is Master data and Transaction data right.
First you should try to delete the open item then only it is possible to reassign the GL account into different group.
If any entries in the account then the system wont allowed you to reassign.
Warm Regards,
Shiv
Similar Messages
-
Vendor Open Item Was Not Offset After a Replacement Check
Hi FI Guru,
We have an issue with vendor replacement check. Our vendor open item still apears in FBL1N after a replacement check is paid. We initially issued a check against a vendor invoice and we had to void that check because due to check printing problem. The check was cancelled in FCH8. We then issued a replacement check in F110. When I displayed open items for the vendor in FBL1N, the vendor invoice still showed up. The replacement check already sent to our vendor. So we have to apply the payment to the vendor's invoice. It seems the second transaction (for the replacement check) is incomplete because I dont't think it hits our bank account.
Here are my questions:
1) Is there another transaction our user needs to offset vendor invoice?
2) If we have to fix it manually, what is the best option to offset the open vendor invoice and still be able to hit our bank account.
Any help is appreciated.
Thanks!!
ReilingHi,
In order to change the Open Item Management for a G/L account using
ZFSEPA02 the line item total(Total of open items)for this account
should match/tally with the account balance for this account (FS10),
otherwise the open item activation will not be possible.
Unfortunately as per note 175960 you find reports RFSEPA02/ RFSEPA03
are no longer supported as of release 4.5A.
ALTHOUGH you can find a possible solution on how to tally the line items
to the balance in the NOTE 403744.
1. Active New General Ledger
This note applies ONLY WITH RESTRICTIONS to Release ERP 2004 or ERP
2005 with activated New General Ledger and activated document
splitting.
In these releases, it is not currently possible to subsequently
activate the open item management under the specified conditions.
The only option currently available is to set up a new account with
open item management and to use this instead of the original
account.
However, it is also possible to deactivate the open item management
using report ZFSEPA03 under the prerequisites described below.
2. Migration to the New GL:
If you are planning to migrate to the new General Ledger using a
migration type that enables the use of document splitting, ensure
that in Phase 1 and Phase 2 NO changes are make to the open item
management. Phases 1 and 2 indicate the period between the migration
date and the end of the actual migration (the "Migration Completed"
indicator is set) -
Possible to clear vendor open item against already posted payment document?
Hi
Can you advise if it is possible to clear an open item against already posted payment/clearing doc? Here is the background to the scenario:
An invoice was posted with transaction FB60. This was subsequently picked up in the payment run F110 and cleared by payment document number 200005678. The item went to the bank on the paymnet file and was paid out to the vendor. The transaction reference, which appeared on the incoming bank statemnet was the payment document number 200005678.
Subsequently it was discovered that the original invoice should have been posted with reference to a PO using MIRO. The requirement now is to reverse the paymnet documnet 200005678 in SAP, then reverse the document that was posted using FB60. After this the invoice will be posted using MIRO. This will create an open item on the vendor account.
This item will not be piad out again. Therefore the requirement is to try clear that open item against the previously posted payment document 200005678.
Is there any way to clear this vendor open item against the originally posted payment document 200005678?? Or any other advice on how this scenario can be handled in SAP?
Thank for your help.
MikeHi,
I tried that option in our test system. I ran FBRA and entered Paymnet Documnet Number (+Clearing Doc Number), Company Code, Fiscal Year.
Then chose menu option Clearing -> Reset Cleared Items.
The system pops up a window asking for a reversal reason and reversal date. I use 01 and posting date of today.
The system now posts another cleared document. That document places the invoice as an open item on the vendor account. It does not place the Payment Document as an open item on the account.
When I go to F-44 only the open vendor invoice is showing there. There is no open paymnet document.
Is there perhaps some configuration setting that stops the placement of the paymnet document as an open item when reset?
Thanks for your help again. -
Vendor Open items Authorisation
Hi Peers!
Is there any report were i can authorise the payments to which vendor and which invoice i can pay today like that.
Ex: Say my higher authority wants to select the open items vendor wise to pay the due. so that i will check that invoices and pay through outgoing payment.
Pls reply soon, Its urgent
Thanks
MuraliHi
There are so many age wise analysis reports are there for analysing the customers or vendors open items. out of those, F.41 for vendor open items there you can find all the relevant data including business area level also satisfied because in some cases higher management wants the particular business area wise required for analysis. similarly f.21 for customers.
I hope it will be suffice your requirement.
Regads
madhav -
Hi Guru's,
We are trying to manually clear some vendor open items using t-code F-44. For some reason we are not able to find the invoice so that we can clear when we go to F-44. However, if you go to FBL1N and pull the vendor open items as of 7/1/09 you can see the invoice listed there as an open item.
Can someone please help me on this?
Best Regards,
NoopersAssuming the vendor document is not cleared there could be two reasons why the document is not in F-44
- Wrong company code
- A special G/L indicator - Document is a special GL document and in F-44 selection screen indicator is missing.
Try additional selection -document number. -
Hi,
I am trying to use "post with clearing" transaction (F-51) and using the "outgoing payments" option there to clear the open items of the vendor. But the system is giving the message as
"No open items found" eventhough the vendor has open invoices. The open invoices are getting diplayed in the FBL1N report as open items but I am not getting the open items list in F-04
Please help me
Thanks,
Krishna KireetiHi Kireeti,
Did u get the solutions for u r issue..
I Got similar issue with Vendor open items..I can see few open items in Report FBl1n and BSIK table.But the same is not picking up in the F-53 manual pmnt.
If u can share u r solution..it would be great help for me..
Thanks in advance..
Rgds
Murali -
Vendor open items aging list - Reg.
Hi,
My client is requesting a transaction in SAP which can be used to produce a Vendor open items aging list and the output should be exactly the same as it is for the Customer open items aging List (transaction S_ALR_87012178). Moreover, It is essential for him to have only one line per vendor. He does not want to find a report in the accounts payable side that looks like the one which he mentioned for the accounts receivable side.
Since this is an urgent ticket, can any body help me in this regard.
Thanks,
Prasanna
Moderator: Please, search before postingDear expert
Reference from sdn forum
You can customize the vendor report to show the items overdue per vendor by using the following steps
1. Create a form using T Code - FKI4
In this form ( two-axis structure) provide the details for each column as per your Client requirement - Due from 0 - 30 days
etc. You can create a column (using formula method) at the end by adding the previous columns, this will give you total
amount of overdue items for each vendor
2. Create a report using T Code - FKI1
Based on the Form created in the above step. Make additional selections based on client requirements like document type,
company code, account type, currency etc. Execute the report.
The following link will give provides detail steps for the creation of the aforementioned form and report.
Re: AR aging report (summary by customer)
Vendor Aging Report
Regards
Ajeesh.s -
Transfer of customer and vendor open items available? (like asset transfer)
Hello,
May I ask you about your opinion.
In SAP we have functionality to transfer assets from burks"A" to bukrs "B".
Do we also have this functionality for customer and vendor open items?
Thank you for your opinion and expertise.
all the best ErwinHi,
Please check following links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?overridelayout=t…
Cross company-code invoice posting and configuration - ERP Financials - SCN Wiki
Regards,
Tejas -
How to clear archived vendor open items in F-44
Hello Experts
My user trying to clear the vendor open items through F-44.once he posted that document and he double clicking the document no, here he is getting error like below
Express document "Update was terminated" received from author "Ravi"
Before that he is trying to display the open item document, here he is getting error like below
System error: Routine Beleg_Nachl info '0100-1100000001-2003-001' Not in
BSEG/archive; inform systems administrator
Message no. F5333
Diagnosis
In program routine 'Beleg_Nachle' an error
('0100-1100000001-2003-001') has occurred. Processing is terminated.
Procedure
This is caused by a program error and you should contact SAP Support.
Can anybody please tell me how I can clear those document and also is there any possibility to get back archive data and clear it.
Thanks in advance
Regards
VamsiHello!
Please check if someone has activated the OpenFI/BTE 1650 in your
system.
Within this BTE you can change parts of the internal table where th
data that should get displayed is in.
Please review the BTE, or if after you deactivate it the line item
display works ok.
In other cases this message can be caused due to inconsistencies, for example if ( for some reason ) there are
entries in BKPF, BSID or BSIK or BSIS and nt in BSEG. Please run the reports below to check inconsistencies:
1) SAPF190 as per note 86067 if you have only the Classic GL active
or
2)TFC_COMPARE_VZ (tcode: FAGLF03) if they are using the NewGL.
Regards,
REnan -
F-53 manual clearing vendor Open Items
Please help me,
When i saw vendor open items in fbl1n sys gives open items, i will try to clear that open items (F_53) sys gives message there is no open items,
Regards,
TMLHi Swati,
The openitems which is showing in vendor account might be the spl gl transactions like advance payment, which are not cleared so far, go to F-44 and clear that spl items.
hope it helps you,
Regards,
kishore -
Reports to display vendor open items by payment methods
Hi Gurus,
Is there any reports to display vendor open items by payment methods?
Thanks iHi,
Use FBl1N or F.41
Goto Dynamic selections, Select payment method give that and execute. It will give you the report payment methd wise.
Regards,
Radhika. -
How to restrict vendor open items to be picked to 45 during F110 process
Hi experts,
My client want to restrict vendor open items to be picked to 45 max during F110 payment run for each vendor.
For example: If vendor " xyz" is having 60 open items at the time of payment run, it should allow max to pick only 45 open items and generate one clearing document during payment run F110.
Kindly give me any suggestions weather it is possible or not.
Thanks & regards,
Raghulhi ,
Thanks for your quick reply.
Actually we are using only payment method C- check.
We have developed ZFORM and ZPROGRAM by copying standard form F110_PRENUM_CHCK and std prog RFFOUS_C.
In My ZFORM only single page is there with invoice details in main window ( upper side ) and check in the below page.
when i had taken print on pre printed stationary sample i came to know in main window at maximum 45 items details can be dispalyed in first page with total amt check in below for each vendor.
Its works fine if each vendor has open items below 45 during payment run.
If any of the vendor is having more than 45 open items then 2 pages are printing.
For ex: if vendor having 60 open items.
For Ex : In first page 45 invoices details with say total invoice amt 30,000 is printing check with same amt.
in second page remaining 15 invoices with say total invoice amt of this 15 inovices is 5000 amt is printing check with 35,000 Instead of 5,000.
We are not using void check concept here as my client dont want to waste checks.
thansk & regards,
Raghul. -
How to clear vendor open items if vendor invoice currency and payment currency different
Hi All.
How to clear vendor open items through f-44 if vendor invoice currency is EUR , payment currency is USD but local currency is INR
while clearing through f-44 system showing error as "to large for clearing clearing is not possible"
I checked all configuration, configuration wise no problem
BR.
ChandraHi Chandra,
You chose any one of the currency i.e. EUR/INR/USD for clearing in F-44. After selecting line items for clearing, system will show a difference. Click on over view button and manually write off the difference by selecting any one account i.e. dummy or small diff.account, after that click on process open items then system will show the difference 0 and simulate the document, here system will post gain/loss exchange GL postings along with other line items. After save the document, manually pass journal entry to dummy account and gain/loss account. I have explained clearly in the below example.
Invoice is in USD - 1000 & INR - 60000
Payment is in INR - 60000
Now I am going to clear these in INR currency in F-44 on 31.03.2015. On this date the exchange rate for USD is 60.10. At the time of clearing system will post the below entry
Vendor A/c Dr 60000 (invoice)
Vendor A/c Cr 60000 (Payment)
Gain from exchange rate A/c Cr 100 (60000 - 60100)
Small diff.write off A/c (or) Dummy A/c Dr 100
After done the above posting, we have to pass below manual JV in FB01
Gain from exchange rate A/c Dr 100
Small diff.write off A/c (or) Dummy A/c Cr 100
Regards,
Mukthar -
Conversion of Vendor open Items
Hi Experts
I am working on FDS creation in regard to the Conversion of Vendor Open items ( not balances ).
SAP Version 4.5 to ECC 6.0 Upgrade
Can you please let me know if there is SAP standard Procedure or What are the different ways to do it ?
Thanks
Meenakshi.NHi Dianne
I am using LSMW .. with BAPI by name ACC_INVOICE_RECEIPT , which mimics the F- 43 process.
I think it needs to have set up of the In bound Idoc Set up Process.
Can u please explain me in step wise how to set up the in bound I doc process regarding this conversion ?
Some guidance on mapping the fields.. is really appreciated.
Thanks
Meenakshi.N -
Data Transfer : Vendor Open Items
I am in process of finding an IDOC solution for uploading Vendor Open Items through LSMW. For this, I am searching for the Message type/IDOC type.
Have any one worked on this scenario? If yes, then kindly let me know.Hi Murali,
I´ve checked that by entering a manual posing via fb01.
The problem is that within the posting I can´t set the tax code for the transfer account (GL-account) since field
MWSKZ must be empty. I´ve already deactivated message no. FF753 but that does not influence the system behavior.
Else I get error message FF707.
Does SAP behave differently in case of LSMW?
Rgds
Murali. N
Maybe you are looking for
-
Hello - my family has recently converted to Mac, and my wife and I have been long-time Outlook users in our workplaces... Trying to help my wife get her calendar data to iCal - one of the few things that we miss from Outlook is the "Week" view, which
-
Time Machine won't work with Time Capsule
HI all I have been using TM to backup to an Iomega portable drive but because the drive is relatively small and because I thought that having less wires around the place would be a good thing, I bought Time Capsule. However when I try to backup to TC
-
Need help - script to continue text in another field if necessary
Wish I could attach my form but it's not available. I am using Adobe Acrobat 9.0. I have a form with two text fields for "Other" information that needs to be shared. If the user types in more characters than the box holds the overflow text doesn't pr
-
Hi, I'm writing a program to read data from an infocube, usfin FM RSDPL_CUBE_DATA_READ, but I can't get a result. This are the parameters I'm using: I_INFOCUBE = 'ZGE_CUB10' I_REFERENCE_DATE = sy-datum
-
I am using the Windows XP operating system with IE6 and SP2 installed. I have created a site by using Macromedia Dreamweaver and Flash. When I open the site I am seeing the outline around the flash files. This also happens incase of mouse over event.