Cancelation of excise invoice
hi,
I have created an outgoing excise invioce usinh j1iin.I has created an excise invoice with same no.but different internal number.
but when i am cancelling excise with same excise with excise invoice no it is showing the earliear one and cancelled the earlier.
but when i want to cancel with internal number it is showing error.
Ceiv transaction not defined for the excise group.
I have checked the excise setting . their the ceiv transaction is defined correctly.
Please suggest the possible solution
regards,
vijay
Check your customization for CEIV, it shud be as below(table -J_1ITRNACC)...
CEIV CR Credit MSUSP CENVAT suspense account
CEIV DR Debit PLAAED PLA AED account
CEIV DR Debit PLAAT1 PLA AT1 Account
CEIV DR Debit PLABED PLA BED account
CEIV DR Debit PLACESS PLA cess account
CEIV DR Debit PLAECS PLA ECS Account
CEIV DR Debit RG23AED RG 23 AED account
CEIV DR Debit RG23AT1 RG 23 AT1 Account
CEIV DR Debit RG23BED RG 23 BED account
CEIV DR Debit RG23ECS RG 23 ECS Account
Cheers...
Santosh
Similar Messages
-
Not able to cancel the Excise invoice for STO process
Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna -
Cancel the excise invoice in Intra company stock transfer
Dear Gurus,
I have one issue in CIN.
The following are the my sequence of operation.
Intra company stock transfer.
1. Purchase order with UB. (from plant A)
2. Delivery ( from plant B),
3. PGI ( from plant B),
4.Excise Invoice ( from plant B to A),
5. Billing ( from plant B),
6. Creating Excise Invoice without purchase order Manually (from plant A),
after PGI and Before MIGO.
7. MIGO.
Now i want to cancel the Excise invoice in Plant A.
how can i cancel the excise invoice.?
kindly provide the valid information.
Thanks.
Best Regards
AnbuIn T.Code: J1IIN, there is an option of deleting / cancelling the Excise Invoice. On the top most left hand side (after entering the Excise Invoice number) select Excise Invoice --> Cancel / Delete.
Here it is possible to cancel the Excise Invoice.
Regards,
Rajesh Banka -
Reverse the material document before cancelling the excise invoice.
Dear Experts,
While cancelling the exice invoice thru J1iex , system is giving me an error message "Reverse the material document before cancelling the excise invoice" .......I checked PO history where all the material documents are already cancelled with MIGO cancellation (movement 106 )
But in J1iex , if I select the cancel option and put this invoice number , it is showing me one document with status "IN PROCESS" and if I select that doc and try to save it. System prompted me the message "Reverse the material document before cancelling the excise invoice ,but if I am trying to post this document system is issuing me a message "All Part I entries have been canceled for excise invoice ...........xx.Exicse table J_1IGRXREF and J_1IPART1 alrady update with both documents.kindly any one suggest me positive.
MINIHello
follow the below steps
1. MIGO:Cancel the material document (movement type 102) & during cancellation update part1 only. This changes the excise invoice document status to In process
2. J1IEX:Post the excise invoice referring the material document (of movement type 102). Creates an accounting document to reverse the CENVAT postings. Creates a corresponding entry in Part II of the appropriate excise register
Thus the excise postings are reversed.
3.J1IEX: Cancel the excise invoice (Do this if your plant does not allow multiple goods receipts per excise invoice).Now the system will allow you to cancel the vendor excise invoice
above the procedure right. you will get this updation excise registers also
Laxman -
Problem in Cancellation of Excise invoice
Hi,
User has created Import PO then he made custom MIRO then GR is done and through J1iex part1 is done. later he realized that there is problem with PO condition for that he has first cancelled the GR then secondly cancelled Custom MIRO. now while doing cancellation of excise invoice in j1iex then below error is throwing
Reverse the material document before cancellation of excise invoice.
So after anaysis of PO in that PO histery got found some amount difference of MIGO delivery cost document. hence i guess this will be the reson of cancellation of excise invoice.
So please provide the solution.
Regards
RahulHello,
Cancell the Customes MIRO
Cancel the MIGO , simuteneously system reverse the PART1 also
Then Cancel the excise Invoice , (first capture the excise invoice wrt to reversed GR document and after the cancel the Excise
Invoice wrt Internal doc nor or vendor excise Invoice no)
Reason: before MIGO you are captured the excise Invoice it means that system will updated J_1IEXCDTL table , after MIGO system will updated the GR refference in the above said table, so i,e the reason capture the excise Invoice wrt Reversed GR and check)
Regards
Mahesh Naik -
Cancellation of Excise invoice after MIRO
Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindarajhi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal -
Cancel the Excise Invoice.
Hi,
I created the Billing document and Excise Invoice. When i went to the Document flow in the Billing Document I found the Accounting document of the Excise Invoice and its status is Cleared.
After that I Cancelled the Excise Invoice. And again I checked the Document flow in the Billing document. But the status is showing the same.i.e Cleared.
Wt it mean..is it correct?
regards,
jyothi.It is correct. the cancellation of excise invoice wont affect the document flow of sales document. For status go to J1ip enter the invoice no or billing doc and enter. here u can see reversed in the status.
Hope it clarifies ur doubt.
anya -
Hi,
After Creation of Commercial Invoice or MIGO the excise invoice should not be canceled , We are using following doc flow for creation of excise invoice
Delivery - - > Proforma Invoice - - > Excise Invoice - - > Commercial Invoice.
So what should we use ( User Exist or BADI ) to restrict cancellation of Excise Invoice ???
T-code : J1IIN
AnkeshI think you are very much aware of forum rules and still posting
duplicate threads.
Do you want to be a guest of julius ? -
Cancellation of excise invoice part II entry
can anybody help me about cancellation of excise part II entry
how it is done
i did transaction <b>J1ih</b> for cancellation of excise invoice but it shows error
<b>excise and modvat accout not defined for CEIV transaction and excise group</b>Dear Sujitkumar Borse,
Pls follow the steps for Cancellation of Excise invoice part II:
<b>Canceling Excise Invoices</b>
<b>T.code:J1ILN</b>
<b>Path:</b>
From the
SAP Easy Access screen, choose
<b>Indirect Taxes - Procurement -Excise Invoice - Incoming Excise Invoices - Individual Processing - Change/Display/Post/Cancel.</b>
In the top line:
1. Select Cancel.
2. Select Vendor Excise Invoice.
3. Enter the excise invoice number.
4. Choose .
5. Save the excise invoice.
With regards,
B.Ravindranath -
Error During Cancelation of Excise Invoice
Hi All,
I am getting the followimg error when I try to cancel the excise invoice
"Excise Modvat accounts not defined for Excise Transaction CEIV
Please provide the solution for the same.
deepakDear Deepak
Refer Note 113480 - Reversal of Modvat Credit
which says
Reversal of excise invoice after utilization is done not possible
Cause and prerequisites
While Determination of G/L accounts for Reversal of excise invoice,
Rounding the excise values was not been done, which resulted in mismatch of values.
Do check if it is helpful
Regards
Jitesh -
Cancellation of billing document with out cancellation of excise invoice
Dear Sir,
I want to control the cancelation of billing doccument. Condition is that with out cancellation of excise invoice there should not be any cancellation of billing document and delivery document.
REgards
BharatYou can try with Routines
Create a routine (can take the routines no 5 / 6 as reference to create the new routine and mention not to cancel the billing doc if it is referenced to create any excise invoice) and assign the same in the required billing type definition.
Thanks
Harikishan -
Dear All,
I have created an outgoing Excise Invoice through J1IS and also POsted it..
But due to some reason, i have to Cancel the Excise Invoice Document that was created..
So i went to J1IS and Cancelled the Excise INvoice.
The Excise Invoice shows CANCELLED... But the Reversal Accounting Document is not generated for the same.
Kindly suggest how do we do.. Is this is the right way for cancelling?
Regards,
Jyotsna Loombahi,
i guess the accounting documents should be cancelled by FI guys...
once they cancel these documents then u can go for further process -
Hi friends,
How to cancel posted excise invoice(GR is completed) ?
Regards,
ChetanHi friends,
I have already tried it in quality system.
1.After cancellation of GR.I tried to post excise invoice but system showing the messege that No Part I exists for availing credit in excise invoice TEST 1 2007
2.J1IH reverse the entry but system is not showing these entries in excise invoice.
so due to this while entering Vendor invoice in miro system showing tax amount from excise invoice.if reduce tax amount then system showing balance in transaction currency.please suggest me whst to do ?
Regards,
Chetan. -
What are options available to cancel the Excise Invoice?
Hi,
What are options available to cancel the Excise Invoice?
Does cancelling the commercial invoice automatically cancels the excise invoice
if not what are the other options?
Any settings required to achieve that.
Usefull answers will be rewarded
Thanks
RegardsDear Rajiv
No cancelling commercial invoice will not cancel the excise invoice in background. For that, you need to run the T.Code J1IH where if you click on Cancel Excise Invoice, system will ask for excise invoice reference, financial year and series group. Here while giving the excise invoice number, you have to ensure that it is preceded with zeroes as you can see in J1I7.
thanks
G. Lakshmipathi -
Cancellation billing & excise invoice
is it possible to cancel billing automatically when excise invoice is cancelled & or excise invoice to get cancelled when billing is cancelled
Hi
in excise group the field excise invoice during billing, if you activated this after saving the billling document excise invoice will be created, now try for cancellation process, let us know it will work or not
as of my knowledge it will work for invoice and proforma invoice
regards
srini -
J1iex - All part 1 entries have been cancelled for excise invoice
Dear Gurus,
Please help me to resolve the issue, I have captured part 1 excise invoice at the time of MIGO, internal excise invoice no generated. With the reference of internal excise invoice, I am trying to post part2 excise invoice through j1iex. At that time am getting the below error.
All part 1 entries have been cancelled for excise invoice 80000 2011
Message no. 4F113
In j_1ipart1 am seeing two line items for single material document which has a goods movement direction with R & I. Would this is being cause any issue. Please advise.
Thanks & Regards,
mohdsams.Because of account assignment, system consumes the goods automatically. Hence the issue is resolved.
Maybe you are looking for
-
does anyone know that thay charge $3 every time you pay cash that is a rip off i started with a cell phone 20 years ago and it was 19.99 but know thw bill is almost 200 dallors when does it stop with corprate greed?????? anyone have a opion????
-
Effects tab is missing in FCPX 10.1.4
My Effects are missing from the Media Browser. For some reason it's been replaced with the titles tab. Anyone know why this is happening. HELP!
-
How to refer an application item in a java script ?
Hi Friends, I have a simple java script for disabling an item as below : <script language="JavaScript1.1" type="text/javascript"> function disFormItems(item1) if ($x(item1).value != "") disItem = document.getElementById(item1);
-
Field value in function module BAPI_SALESORDER_GETSTATUS
Hi Ppl, I am using FM BAPI_SALESORDER_GETSTATUS and for each line item a value of "B" is returned in DLV_STAT_H field, can somebody tell me where where to find the meaning of these values? Thanks Rob
-
IBM Thinkpad T41 - Display Problems
Hi, I am new to this forum and have had a quick search and could not find the answer to my problem. I support a customer who has an IBM T/P T41 laptop, type 2373. The customer is a 6 hour round trip away, so the details posted are what he has given