Cancelation of partial line items in the MBST is not opening the delivery
Hi Gurus,
We are posting the GR with 503 mvt type with ref to delivery. In this process when some of the line items have to be returned, we are posting MBST against those line items. To cancel / reverse the same in delivery using VL09, system (does not re-open those line items) is not allowing us to cancel partial line items. Instead the entire delivery is being cancelled.
The problem to cancel / reverse the entire delivery & material document is some of the line items are are already consumed.
When we cancel/reverse some of the line items using MBST and there by cancel the material documents, system does not allow us to cancel the particular deliveriesdoes not re-open those line items). When we cancel the entire delivery, the link between the original delivery and already consumed materials is lost.
I guess this is Standard SAP behaviour and some one would have encountered with a similar problem.
Request you to check and let me know how to resolve this issue.
Thanks / Sandeep
The MBST is cancellation of material documents or in other word you are cancelling the action whic were carried out earlier.
You might have noticed that when you are using MBST and entering input parameter as material documents system by default will carry all the infoermation which were there in that material documents.
I fyou weants to cancel part of material you can do this in MIGO sereen and select the option of return delivery and saelect the line item which youw wish to send it back or return to vendor.
For partial returns you should always use MIGO, RETURN DELIVERY against MATERIAL DOCUMENT, put in the material document No. and then whichever line you want partially return, you enter the partial quantity and save the document.
Hope this clear.
Similar Messages
-
my macbook pro mac osxv 10.6 snow leopard. when on the power bottan it take a long time boot my mac it will heat all the computer and not open the my mac how can i slove the problams.
Post in your native language. It might be clearer to those with a translator.
-
Dear sir,
When I restart the browser, its not opening the previously opened tabs even though I saved before closing the browser. This problem was not there in the older versions less than 3.6.8. Even the browser speed has gone down. This is everyday problem with this browser.
Pls suggest ASAP.
Thanks & Regards,
TripadSee this article for some suggestions: [[Firefox has just updated tab shows each time you start Firefox]]
See also http://kb.mozillazine.org/Preferences_not_saved and Preferences are not saved -
Second line item in Shoppin cart is not displaying the details
Second line item's district value is not displayed when the detailed button of second line item is clicked.
In the shopping cart , there are two line items are added. ( before ordering )
click on the detail button of first line item, then click on the Ship to address tab . it is displaying the details of the first line item ship to address.
For getting the value in the district field, BBP_doc_change_badi is implemented .
The problem is when i click on the detail button of second line itme , the value in the district field is cleard.
When i click on refresh buttion after that, the value is there.
I debugged BBP_DOC_CHANGE_Badi~bbp_SC_change method,
When the second line item is clicked, it populates only the value of first line item . After that if i click on any other buttion, the it_item in the badi populates the second line item value.
Is this a standard error in SRM or is there any way to display the value of second line item when it is clicked at the first timeHi,
In item category details insure there is tickmark for Schedule line allowed,
In sales order at item level under shipping tab see storage location ,plant is appearing or not,
Kapil -
RHS9 & RH8/Clicking links to topics more than 3 "deep" in the TOC does not open the TOC
Our IT department recently purchased and installed RoboHelp Server 9. I am publishing two RoboHelp 8 projects to the server using WebHelp Pro output. When I view the projects, I am able to navigate the table of contents without issues, but if I click on a link in a topic that links to another topic that is 3 or more "deep" in the table of contents, the topic will display in the main window but not open its location in the TOC. I am able to navigate the topic in the TOC myself and view it without a problem.
The behavior we expect when clicking on a link to a topic that has an entry in the TOC is that the TOC will open and highlight the topic as well as open it in the main window. We need this functionality because we use a "recent updates" page and would like our staff to see where a topic is located in the TOC after they click the link to the topic.
This behavior does not occur with items two levels deep in the TOC or with our current WebHelp output. Using our smaller, 600 topic project, we tried removing all TOC books except for one that went 3 levels deep and then tried to duplicate the behavior - but it worked fine. So, we suspect that it is an issue with RoboHelp Server and the number of topics/TOC entries we have. (Roughly 600 in one project and 1500 in another)
We have attempted the Adobe fix described here: http://helpx.adobe.com/robohelp/kb/books-topics-missing-toc-webhelp.html which results in the same behavior, as well as some new behavior when attempting to access items 3 or more deep in the TOC - the message, "Loading, click here to cancel..." displays and the topic will not load. (Similar to this thread: http://forums.adobe.com/message/4116269#4116269) We've since reinstalled the server, republished the projects and we're back to square one.
Any thoughts on this behavior? We're at a loss at this point.Hi there
Often, when this issue arises with regular WebHelp, I will advise the following change. Perhaps it will help with WebHelp Pro, I'm not sure. But it's worth trying to see.
In the Single Source Layout properties for WebHelp, look in the Navigation section and change the Speed Optimization.
I just checked my WebHelp Pro and really don't see anything similar that jumps out at me for this setting, so I'm guessing the suggestions in that link are possibly a way of doing that.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks -
I run win7 64x pro. This is a restatment of problem I posted yesterday I have a hard time believing I'm the first to ever have this problem which is as follows: I used CC Cleaner because of FunMoods, which is the onlt thing I have found that removes that virus thoroughly
Having done that-Face book and a few other sites came up as hyperlinks only with no illustrations, So- I deleted Firefox completely and downloaded a new copy. It downloads but won't open. I used an old copy-13.0 & same thing-does not open.
I have used Firefox for Win since it came out.. My rule of logic with computers is that when I have some problem I cannot solve myself- I CANNOT be the first person to have had that problem yet I see no answers. I would appreciate some help. Thank you.I am the same one who posted that question though the problem is exactly as described.. I watch the progress bar unpack the download and then it gives me the choice-run with previous settings or as administrator using a password.
Either way-I do not get a new browser. I do get a screen saying that my previous settings may be partially lost. I think a month ago I had also used CC cleaner. At that time-right clicking worked. Now it does not matter. Clicking on the Mozilla download gives me the progress bar but NO unpacked browser. -
I have a HP Deskjet D4200 series printer that I used with my iBook G4 and I recently purchased a new MacBook Pro 13.5" and I would like to use this printer with my new lap top. When I use the disc to try to install the printer driver, I get a message that "I can't open the application HP Installer because the Power PC applications are no longer supported. I am not sure what all that means but is there any way to use this printer with my new computer?
ThanksIt would help to post this in a more proper form. This is for the iTunes family of stores.
-
I am trying to install ViaCAD v7.2 for Mac, but when I try to open the ".dmg" file, it will not open, so the installation never begins.
I was trying to find the system specifications ViaCAD v7.2 but wasn't too successful. However I found the App Store has V8.0.2, have you already purchased 7.2? If so perhaps you could request an exchange for a more current version.
-
Ibooks for mac. the app will not open the icon is a white sheet with a pen pencil and a ruler
ibooks app for mac will not open. when i try to open it i get a error message " problem report for ibooks " ibooks quit unexpectidly then a log with error code opens up. please help correct this problem thank you AG
If you don't already have a current backup, back up all data. There are ways to back up a computer that isn't fully functional. Ask if you need guidance. You can skip this step if you don't care about the data that hasn't been backed up.
Reinstall the OS.* Your data should be unaffected unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
I have an ipad 2.
Recently, when I receive an email ( hotmail) the 5 line preview message appears in the left hand column as it should but the full message is not displayed.Don't know if this is related, but the iCloud servers have been having message delivery issues effecting some users for quite a while today (see http://www.apple.com/asia/support/systemstatus/). Perhaps it started effecting some users several days ago.
-
Line items in vendor code is not visible
Hello SAP Gurus,
My problem is related to advance payment to vendor,in FK10N (vendor line item display) line items for particular vendor is not visible.The actual problem which is coming is like for Fiscal year 2011 the vendor line items data is not being displayed but the system message is "29 item displayed" but in the screen layout there is no display list.System message number is MSITEM024.
It is not happening for single vendor,it happens for entire vendor list.
with regards
RajivHi ,
Please check whether it is due to missing authorizations .
Kindly check the auhtorization group that you have put in the vendor master .
After executing the FK10N execute the transaction SU53 there you can find the missing authorizations .
Regards ,
Dewang -
I want that little star back that opens the bookmarks sidebar. It's just to the left of the address field on XP in FP 25. But on Windows 8 in FP 25.0.1 it's not there. Instead there's a star that sometimes appears on the right of the address bar. But the star on the right does not open the bookmarks sidebar. It only displays a list of bookmarks and options, which do not include opening the sidebar.
Has this option been removed and replaced with Ctrl B?You can look at the Classic Theme Restorer extension to restore some functionality that was lost with the arrival of the Australis style in Firefox 29.
This includes toolbar icons to open the bookmarks and the history in the sidebar.
*Classic Theme Restorer: https://addons.mozilla.org/firefox/addon/classicthemerestorer/
You can check the settings of the CTR extension via its Options/Preferences button on the "Firefox/Tools > Add-ons > Extensions" page.
See also:
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox
*https://support.mozilla.org/kb/common-questions-after-updating-to-new-firefox
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
*http://forums.mozillazine.org/viewtopic.php?f=38&t=2824649 -
Could not open the Bluetooth ACPI device driver (tosrfec.sys)
Hello,
I installed Toshiba Bluetooth Stack on Windows 98 SE (Version 2.03 of BT Stack..).
If i wan't to run the Bluetooth Manager I always get the message "Could not open the Bluetooth ACPI device driver (tosrfec.sys).".
What can I do ?
Message was edited by: jollydwarfHello
Click to BT topics list and there you will find link to Toshiba Bluetooth Information Center. Check please FAQ section and there you can find many useful information about BT and BT troubleshooting. -
Could not open the ICU common library
Dear all,
I’ve done heterogeneous OS migration on our Solution Manager system release ver. 7.0 Ehp1, from HP-UX 11.31 to RedHat 6.5. Then we need to perform the system upgrade to version 7.1
Kernel version is SAP Kernel : 720_EXT_REL.
Database Client Library : OCI_112, 11.2.0.3.0, V1, default.
created in : Linux GNU SLES-11 x86_64 cc4.3.4 use-pr121116
ICU Version : 4.0.1 Unicode Version 5.1
Everything is working fine. EarlyWatch reports are prepared. But when I checked the SLD http://saptst:54000/sld I’ve got the error “Internet
Explorer cannot display the webpage”. I also checked with IP address and it’s the same error.
With Chrome browser the error is “Oops! Google Chrome could not connect to saptst:54000”
I checked the SLDCHECK and got:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_SMP gateway host: saptst
gateway service: sapgw40
Testing the RFC connection to
the SLD java client...
RFC ping was successful
SLD server access
settings:
host name: saptst
port number: 54000
user : SLDAPIUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function
LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 3
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
SAPSLDAPI RFC is working fine.
But on the putty connection with the server I’ve got “Unknown function module: Function SLDJAVA_ACCESSOR_REQUEST not found”.
I’ve checked the std_server0.out file in the work directory:
Could not open the ICU common library. The following files must be in the path described by the environment variable
"LD_LIBRARY_PATH":
libicuuc.so.30, libicudata.so.30, libicui18n.so.30
[nlsui0_mt.c 1620] pid = 3079
LD_LIBRARY_PATH is well set in environment of the smpadm user.
The RFC libraries in the /sapmnt/SMP/exe, /usr/sap/SMP/SYS/exe/run, /usr/sap/SMP/SCS01/exe
and also in /usr/sap/SMP/DVEBMG40/exe are
libicudata.so.34
libicudata.so.40
libicudecnumber.so
libicui18n.so.34
libicui18n.so.40
libicuuc.so.34
libicuuc.so.40
There is no libicuuc.so.30, libicudata.so.30, libicui18n.so.30.
I’ve also downloaded the last kernel patches, unpacked and checked the RFC libraries, but there were no libicuuc.so.30… with number 30.
Why the system is searching for these libraries with 30, but not 34 or 40?
Can you please help how to solve the error “Could not open the ICU common library”?
Is this the problem why I can’t open the browser http://saptst:54000/sld and I got the error “Internet Explorer cannot display the webpage”?
Thank you in advance.
Best regards,
RuzicaDear all,
I've tried to deployed Java with:
SAPJEE10P_5-10003469.SCA
SAPJEECOR10P_19-10003466.SCA
SAPJTECHF10P_21-10003468.SCA,
but the file for the SAPJTECHS, SAPJTECHS10P_26-10003467.SCA finished with the
error again for "Could not open the ICU common library.
The following files must be in the path described by
the environment variable
"LD_LIBRARY_PATH":
libicuuc.so.30, libicudata.so.30, libicui18n.so.30
The deployment failed with the following error:
Starting Deployment of SQLTrace
The SDM will now start SAP Web AS Java instance processes in order to perform online
deployment. After that the deployment will proceed.
It could take some time, so please be patient.
Aborted:
development component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0', grouped by :SDM could not start the J2EE cluster on the host saptst! The online deployment is terminated. A timeout occured during the cluster running verification. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineJ2EE620OnlineDeployerImpl.performAction(DeploymentActionTypes).STARTUP_CLUSTER)
Deployment of SQLTrace finished with Error (Duration 1801206 ms)
Starting Deployment of SAP_JTECHS
Aborted:
software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.7.00.10.26.20121031152700''/'0':Failed deployment of SDAs:development
component 'SQLTrace'/'sap.com'/'SAP AG'/'7.0010.20061103144726.0000'/'0' :
aborted
Please, look at error logs above for more information!
Deployment of SAP_JTECHS finished with Error (Duration 918 ms)
I've tried:
#cd /usr/sap/SMP/DVEBMGS40/SDM/program/
#./StopServer.sh
#./sdm.sh jstartup mode=standalone
#./sdm.sh j2eeenginestartstop timeoutmillisec=1800000
#./sdm.sh jstartup mode=integrated
#./StartServer.sh
But still the error "SDM could not start the J2EE cluster on the host saptst" appeared again.
Can you please advice what should I do to deploy the SAPJTECHS10P_26-10003467.SCA ?
Thank you in advance,
BR,
Ruzica -
How I put photos / images at facebook page? The files do not open.
How I put photos / images at facebook page? The files do not open.
The crash happens on setting up the audio hardware. Either you have a broken driver or your preferences is damaged. You can try deleting the MainStage preferences.
Maybe you are looking for
-
WiFi problem with iOS 7.0.3 and iPhone 5
My iPhone 5 has been working flawlessly with iOS6. After updating it to iOS 7 I have an irritating problem with the WiFi connection at work. Everything is OK for some time, then the WiFi connection just stops working. There is a WiFi icon max signal
-
How applet jar files are downloaded
Hi, I want to deploy my app as an applet in a jar. So assuming the end user has a compatible JRE installed. The HTML in my page would point to my jar on the server and when the page is opened, the jar is downloaded to the end user machine and run in
-
Mac Mini i7 2.3Ghz with 16Gb ram locks up
My new Mac mini keeps on crashing but not completely as it seems to be the finder that is having problems. I can be running iTines and it will continue to respond and play music but when I try to shut down the mac just sits there with the busy icon t
-
Iphoto freezes when trying to upload photos
Hi everyone, Being new to the mac world (VERY new... I just bought my computer on Friday), I am already having problems with uploading photos. I uploaded everything from my digital camera fine, but then when I tried to upload my Easter pictures, ever
-
How to check date globally?
Hi, I wonder how I best check for a date against a fixed date. e.g. I want to check that zrcthau-erdat is before 01 jun 2008. I wonder as I do not know how the date preference is set for the user running the program. it could be: MM/DD/YYYY MM-DD-YY