Cancellation of background job

HI ALL,
I have executed one program in backgroubd , it updates one of the database table . It now second day and still ACTIVE , i want to do some changes in the program and see
its effect now . How can i cancel this job , so that whatever chnages have been done to database they are not reflected in DB or it should appear as if no job was executed for this program?
Thanks in Advance .

Hi,
You can do it in 2 ways.
From se37 , select the check box of job and goto menu Job->cancel active job.
2. Double click on the background job and click job details button . Note down the PID and application server name.
Goto transaction SM51 and select the PID and goto menu program ->cancel without core.
Sometimes the job gets cancelled at the Application server but still it shows active status in SM37, so checking the job from SE37 by going to menu JOB->check active job will show the correct status.
Hope this helps.

Similar Messages

Mass deletion or cancellation of background Jobs.

hi,
Can anybody tell me the program name or the Job name by which we can cancel or delete all the jobs i.e mass deletion or cancellation of background Jobs.

Hi,
One clarification:
BTCTRNS1 report/program suspends all Released jobs (not Scheduled status) and make the status 'Released/Suspended' - so that they will not run during your activity.
When you will run report/program BTCTRNS2 (using se38/sa38) it will release them again.
Note: You can not freeze/suspend jobs which are event triggered. You have to set them using sm37 (released -->scheduled) - option is available in the menu.
Jobs in scheduled status never run.
Don't release/submit any job after BTCTRNS1, the new job will run (it will not be suspended). Please instruct other user also not to submit any job further.
Thanks,
Subrata

Report to cancel released background jobs

Hi Folks,
Can anyone guide me whether there is any standard report/program where i can delete/cancel the background jobs already released/scheduled? We can cancel individual job using SM37, but i need to cancel "n" number of jobs at one slot.
Thanks in advance.
Regards,
Shiva

Siva,
can plz tell me how to change or reschedule the time on background job ?
Dilip

I cannot cancel a background job

Hello,
I cannot cancel a background job which is running since the last Friday. I use the SM37 transacction but it doesn't stop.
Can anybody tell me how can I get to stop this job?
Thanks in advance.
Regards.

Hello friend,
I think these links will help you to stop the job running in back ground,
How to stop Active Background Jobs
http://stackoverflow.com/questions/1439033/sap-background-job-hows-it-running
If your problem still exists revert back to me i will help you.
Thanks,
Sri Hari

How to cancel the background job processing in ABAP programming?

Hi,
I have a requirement where i need to cancel the job depending on some constraint. My code is something like this:
Select some data from the table.
if sy-subrc = 0.
Do nothing.
Else
Cancel the job
call function 'BP_JOB_ABORT'
exporting
 jobcount = number
 jobname = name
EXCEPTIONS
 CHECKING_OF_JOB_HAS_FAILED = 1
 JOB_ABORT_HAS_FAILED = 2
 JOB_DOES_NOT_EXIST = 3
 JOB_IS_NOT_ACTIVE = 4
 NO_ABORT_PRIVILEGE_GIVEN = 5
 OTHERS = 6
The above code is cancelling the job but it is throwing an exception called CX_SY_DYN_CALL_PARAM_MISSING because i dint pass job count. How can we find the job count of next job that is going to run? Or How to handle the exception which it is throwing. Even if i try to handle that exception something like this:
TRY
call function 'BP_JOB_ABORT'
exporting
 jobcount = number
 jobname = name
EXCEPTIONS
 CHECKING_OF_JOB_HAS_FAILED = 1
 JOB_ABORT_HAS_FAILED = 2
 JOB_DOES_NOT_EXIST = 3
 JOB_IS_NOT_ACTIVE = 4
 NO_ABORT_PRIVILEGE_GIVEN = 5
 OTHERS = 6
RAISE EXCEPTION TYPE CX_SY_DYN_CALL_PARAM_MISSING.
CATCH
CX_SY_DYN_CALL_PARAM_MISSING.
ENDTRY.
It avoids the exception but it doesnt cancel the job. I even tried with function modules like JOB_OPEN
JOB_SUBMIT,BP_JOB_SELECT,BP_JOB_ABORT and tried to build some logic using status overview table (TBTCO) and TBTCP (Jobstep overview table).
Can someone suggest me the right way to write this program ?
Thanks in advance.
Rashmi

Hi,
Problem is solved.
Create an background job with 2 steps. The first step in the background job calls the program ZBACKJOB_STEP1. In the variant we have a wrong material number
If the material number is not found in Mara, the next step in the job should not get executed and the job should get cancelled..
In the above posts i had asked how do I get the job count of the job that is currently triggering the program at the runtimeu2026..If u see the below code uu2019ll get to know.. We have to use the standard structure TBTCM which captures the properties/characteristics of the job.
REPORT ZBACKJOB_STEP1.
TABLES: MARA,TBTCM.
PARAMETERS : MATNR TYPE MATNR.
START-OF-SELECTION.
SELECT SINGLE * FROM MARA WHERE MATNR = MATNR.
IF SY-SUBRC IS INITIAL.
 WRITE / : 'This is the material selected on the selection-screen' , MARA-MATNR.
ELSE.
 CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
 IMPORTING
 EVENTID = TBTCM-EVENTID
 EVENTPARM = TBTCM-EVENTPARM
 EXTERNAL_PROGRAM_ACTIVE = TBTCM-XPGACTIVE
 JOBCOUNT = TBTCM-JOBCOUNT
 JOBNAME = TBTCM-JOBNAME
 STEPCOUNT = TBTCM-STEPCOUNT
 EXCEPTIONS
 NO_RUNTIME_INFO = 1
 OTHERS = 2.
 IF SY-SUBRC = 0.
 CALL FUNCTION 'BP_JOB_ABORT'
 EXPORTING
 JOBCOUNT = TBTCM-JOBCOUNT
 JOBNAME = TBTCM-JOBNAME
 EXCEPTIONS
 CHECKING_OF_JOB_HAS_FAILED = 1
 JOB_ABORT_HAS_FAILED = 2
 JOB_DOES_NOT_EXIST = 3
 JOB_IS_NOT_ACTIVE = 4
 NO_ABORT_PRIVILEGE_GIVEN = 5
 OTHERS = 6.
 IF SY-SUBRC <> 0.
 ENDIF.
 ENDIF.
ENDIF.
Regards,
Rashmi

How to cancel the background job?

Hi,
I have schedule the backgroud job.How to cancel the background the job.
When i select the job and click on stop button, iam getting message "job is not active - cancellation not possiable".How to schedule the background job.
Regards,
T.suresh

goto sm37
SM36 Define Background Job
SM37 Background Job Overview
SM39 Job Analysis
U can Moniter the background Jobs through T code SM37
In the Simple Job Selection window enter the name of the Job and User of that Job and u can check the status of that Job like JobName, Job CreatedBy, Status, Start date, Start time Duration(sec.) Delay (sec.).

How to cancel scheduled background job?

Hi,
I have used FM 'HR_START_BATCHJOB_IN_OTHER_SYS' to schedule background job.
Some mistake has happend and this FM calling has gone to infinite loop. So, now the system is keep on generating background job. I tried looking into SM36 to stop this background job but i failed.
Can anybody help me how to stop scheduled background job please.
Regards,
Mukund.

Hi,
Check which background process your job is running from the Job details and inform your Basis consultant to Kill the process. If you have sm50 acess or sm66 access you can do the same.
Regards,
Vijay v

Cancel a background job

Hello Gurus,
I have created a Z-program and scheduled it in background for every 15 mins.
In some cases I if the program doesn't fulfill the requirement I have to cancel the job which is running.
Is there anything specific thing needs to be done to cancel a job or just "Leave Program" will do the work.
Please let me know.
Regards
Mac

Hi Mac,
After executing ur program the sessions will registered in SM37
with differrent status like NEW , PROCESSING , PROCESSED.
Go to Sm37, enter the job name and user name then select
the options scheduled,released and ready.
then cancel the jobs which are displayed.
Regards,
Ganesh.

RFC to cancel background job

I need to cancel a background job from running by using a Remote Function Call. Can anyone provide an example of an RFC for this? Ideally, it would cancel all jobs owned by a certain user.

BAPI_XBP_JOB_ABORT wants the JOBCOUNT as well as the JOBNAME. How can I get the JOBCOUNT? I don't believe there is a way to capture the ID from the external application kicking off the SAP job.

Notification upon Background Job Cancellation

Hi All,
We would like to send a notification to responsible person upon CANCELLATION of background job for various reasons.
What would be the best way to do it?
I tried to various events of business objects BPJOB/BPJOB_SMAN, with no sucess.
Will appreciate any guidance in this regard.
Thanks in Advance.
Regards,
Lakshmi Narayana

HI ,
You create one Z- Report and Write the following logic in it :-
1. Give a Job Name as selection selection parameter on the selection screen.
2. Select all those records from the Table TBTCO where JOBNAME = selection screen job name and SDLSTRTDT - sy-datum and STATUS = 'A'.
This will return you with all those jobs which were scheduled and canceled on current date. Status 'A' Means Canceled jobs.
3. Now you use FM 'EFG_GEN_SEND_EMAIL' to send a notification to the required user as per your requirement.
4. Now Enter all the JOb name which you want to monitor and save one varient for it
5. Now go to SM36 and Schedule this Z-Report with the created variant and the frequency you want.
This will Satisfy your requirement.
Please check and Revert.
Regards,
Nikhil Joshi

Cancel the Backgrounf job

Hi Experts,
i have to cancel the Backgrounf job which is active and Running. i am getting this active job from TBTCO table and using FM "BP_ABORT_JOB' and i am passing ' Job coun' and Job name' but too i am not able to cancel the back ground job. Please suggest me how to do this or any other Fm by which we can cancel the active background job?>.
Please help on the same.
mahesh

Check program RSBTCDEL
You can call it using the job name
similar question for reference How to cancel the background job processing in ABAP programming?
Edited by: Keshav.T on May 3, 2010 2:52 PM

Regarding Background Job Abort using

Hi ,
I am using FM BP_JOB_ABORT to abort background jobs through program,but it taking longtime to cancel background jobs in SM37 after exectuing FM BP_JOB_ABORT in program..
will i have to write any statement in program after this FM BP_JOB_ABORT to cancel the background job immediately through program..
Awaiting for valuable suggestion..
Regards
Anil

Hi,
I looking for FM to cancel background jobs quikly through program..
Regards
Anil

BWREMOTE background job canceled in sap r/3 system

Hi my friends,
Thanks for your help ahead.
Today I checked the background job in SAP R/3 created by BWREMOTE via SM37. It showed me some jobs had been canceled.
I displayed its log, the detail message is:
==========================================
Step 001 started (program SBIE0001, variant &0000000083494, user name BWREMOTE)
DATASOURCE = ZQM_NOT_SHFGRP
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,593 records
Result of customer enhancement: 1,593 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,593 records
ABAP/4 processor: SAPSQL_INVALID_FIELDNAME
Job cancelled
==========================================
Then I displayed the "Long Text" of the job log. It is
One of the field names in the SELECT clause was not recognized.
Error analysis
The SELECT clause was specified in an internal table at runtime.
It contains the field name "TPR00", but this does not occur in any of
the database tables listed in the FROM clause.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLXRSA " in
"EXIT_SAPLRSAP_001".
The main program was "SBIE0001 ".
Source code extract
008840 concatenate 'TPR'
008850 day_temp+6(2)
008860 ' = '
008870 ' ''' zshift '''' into
008880 cond .
008890 append cond to itab .
008900 select schkz into i_not_shfgrp-zzschkz from t552a
008910 where zeity = '2'
008920 and mofid = 'CN'
008930 and mosid = '28'
008940 and ( schkz = 'SFTA' or
008950 schkz = 'SFTB' or
008960 schkz = 'SFTC' or
008970 schkz = 'SFTD' )
008980 and kjahr = day_temp+0(4)
008990 and monat = day_temp+4(2)
> and (itab) .
009010 endselect.
I guess that there is not a field named TPR00 in table t552a.
Next, I opened the 'project management of sap enhancement' via CMOD, entering the project name and chosing 'Display'.
Then Double click the Components 'EXIT_SAPLRSAP_001', we can see the function module 'EXIT_SAPLRSAP_001'. In the source codes, there is an include program, it is 'INCLUDE ZXRSAU01.'.
Then, I double clicked the Include program and find the position program terminated. The source codes are:
ZQM_NOT_SHFGRP *
when 'ZQM_NOT_SHFGRP'.
loop at c_t_data into i_not_shfgrp .
l_tabix = sy-tabix .
clear :mbatch ,zshift,cond ,zfield, zcharg, day_temp .
refresh itab.
if i_not_shfgrp-ausvn is initial.
else.
aa = '080000'.
bb = '160000'.
cc = '235959'.
day_temp = i_not_shfgrp-ausvn.
if i_not_shfgrp-auztv ge aa and
i_not_shfgrp-auztv lt bb .
zshift = 'MSHF' .
elseif i_not_shfgrp-auztv ge bb and
i_not_shfgrp-auztv le cc .
zshift = 'LSHF'.
else .
zshift = 'NSHF'.
day_temp = i_not_shfgrp-ausvn - 1.
endif.
concatenate 'TPR'
day_temp+6(2)
' = '
' ''' zshift '''' into
cond .
append cond to itab .
select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) .
endselect.
endif.
I found that we got a TPR00 during concatenation. In other words, day_temp+6(2) = 00. But I think it is impossible. I can not explain this.
Any ideas, my friends. Many thanks.

select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) . => doesn't make sense?!
endselect.
endif.
it seems something got deleted between 'and' and '(itab)'... so, you'll have to recheck the requirements for your select to fill the 'and' statement further.
so, it should look like
and monat = day_temp+4(2)
and <some kind of condition that needs to be fulfilled>.
endselect.
<some logic to fill a line in your internal table>.
append cond to itab.
endif.
obviously <some kind of condition that needs to be fulfilled> needs to be replaced by a real condition
and <some logic to fill a line in your internal table> needs to be replaced by some kind of formula
I assume something like (otherwise it would be really weird to select that field):
cond = i_not_shfgrp-zzschkz.
or a formula using the i_not_shfgrp-zzschkz field.
It would also be a lot better to replace your select ... endselect by a select single as you'll be selecting 1 record only anyways.
Message was edited by:
RafB

HRALXSYNC Background job is cancelled

Hi,
I scheduled HRALXSYNC report in background but it is executed for some time and then it is Canceled and the job type is execute immediately.
Here am pasting the details of scheduled job.
Date            Time           Message text
08/30/2011 07:09:52    Job started
08/30/2011 07:09:52    Step 001 started (program HRALXSYNC, variant SAP&DEFAULT, user ID SHAIKSJ)
08/30/2011 07:17:34    Enter at least one number for the business partner
08/30/2011 07:17:34    Job cancelled after system exception ERROR_MESSAGE
Note: Here this background job run as "changes since".
Can any suggest me how to solve this issue.
Thanks in advance
Saleem

Hi Saleem,
Not sure if you already solved your issue.
But I have one remark regarding the value of "Changes Since":
The program HRALXSYNC stores the date of last successful runtime in table T77ZZ (REPID=HRALXSYNC).
"01.01.1900" is the inital default date. Please start HRALXSYNC in dialog mode and select "Changes Since" and execute the program. Then select all lines of the result list and press on the 'Repair' button. Errors in the result need to be investigated.
I am actually as well 'fighting' in the area of HR data Integration into CRM.
Kind Regards,
Bjoern

Background job getting CANCELLED

hello,
i have a background job scheduled for a report program.it is getting cancelled and giving the following error:
"TABLE_ILLEGAL_STATEMENT"
You attempted to change, delete or create a line in the
internal table "???", but no valid cursor exists
for the table.
Possible reasons:
1. The relevent ABAP/4 statement does not include the addition
   "...INDEX...", although the statement is not
   inside a "LOOP...ENDLOOP" loop processing this table.
2. The relevent ABAP/4 statement was called from within a
   "LOOP...ENDLOOP" loop after a DELETE "???".
what could be the reason?

it is also giving following error message:
Caution: Program has changed
Caution: At time of termination, Active source code no longer available and after above two statements its giving sign "?" before every statement in below manner:
024300 ?     lit_ekpo_dummy1[] = it_ekpo[].
024310 ?     DELETE lit_ekpo_dummy1 WHERE ebeln NE tab1-ebeln.
024320 ?     DESCRIBE TABLE lit_ekpo_dummy1 LINES count01.
024330 ?
024340 ?     REFRESH lit_ematn_dummy[].
024350 ?     lit_ematn_dummy[] = lit_ematn[].

Cancellation of background job

Similar Messages

Maybe you are looking for