Cancellation of Booking

Dear Freinds
  I have a requirement   regarding the cancellation of MY- BOOKING .
For the transaction PV8I(My-BOOKINGS) while cancelling  Bookings it will not ask for the reason, as per the documentation given for the BADI HRTEM00NET_WEBST Is for the reason for cancellation when we are trying to cancel the booking but iam not able to get.
Iam not to getting the functionality given in PSV2 where when we trying to cancellation we will get a drop down box asking for reason . i want almost similar to this functionality.
if you have sample code do give me it would great help for me.
Happy independence day to all the SDN freinds.
Regards
chandu

>
Debdarshan Panda wrote:
> Is there any modification which can be done in "hcm_learning" bsp to hide the cancel buttom ? or any other better way? Please suggest
> Deb
any validation/authorization check kicks in only after the user hits  the 'cancel' button.. why show it if you are going to prevent the action any away.. hiding it in the BSP is better..
~Suresh

Similar Messages

  • Cancel the booking for ILT courses

    Hi All,
    Currently if an employee is booked into the course/training  thru ESS, which is scheduled on the same day of booking and then we are not able to cancel the booking thru ESS on the same day.
    In portal there is message that says" You are booked for this course. You cannot cancel the booking since the course has already started or finished. " even though i have 2 schedules on the same day one in the morning and the other in noon so employees book for morning session and then they realise that they can't make it so when they try to cancel they get the above error message.
    Pls let me know how can the ee cancel the course before the training starts and book the non session.
    thanks in advance.

    We just identified this issue as well.  If you create a curriculum that consists of a WBT and then an ILT as sequenced, all dates appear.  This is the sequence my client always uses and what we tested, so we were able to go live with the issue you described.  However, we are logging an OSS message.  I would recommend you log one too - the more the merrier
    Good luck,
    Sharon

  • HT203433 I hit download instead of sample can I cancel the books

    I accidentally hit download instead of sample and bought a couple of books by mistake, can I cancel them?

    http://www.apple.com/support/itunes/contact/

  • Can i get a refund if I ordered wrong book on ibooks and cancel it please?

    Can i get a refund and cancel a book if I ordered the wrong one on ibooks?

    Is it a book that you've bought or is it only a pre-order ? If pre-ordered then you can cancel the pre-order : iTunes Store: About pre-orders (you aren't charged for pre-orders until they are released, so there shouldn't be anything to refund)
    If it's an already released book that you've bought then purchases are considered final, but you can try the 'report a problem' page to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Accidently ordered the same book twice on my iPad, how do I cancel?

    Accidently ordered the same book twice on my iPad, how do I cancel 2nd book?

    You can find the information on this purchase on iTunes:
    http://support.apple.com/kb/HT2727?viewlocale=en_US&locale=en_US
    There's also a link asking you to report a problem; check this link. Except in the case of a system error, don't expect a refund - but this is your solution.

  • PSV2 - Not cancelling  Attendance after Booking has been cancelled PD - PT

    Hi,
    I hope that you can assist me.  We have got Integratino turned on between PD & PT and the attendance codes for going on a course are set up in SEMIN APART. 
    If you book a person the code is created correctly in the Time module, but if you cancel the booking the attendance isn't cancelled in Time.  Can anyone assist me with this?
    Regards,
    Francois

    Hi,
    I hope someone can help,
    It seems that a Full load only brings in records with a status of 30
    A delta load, however brings in status 60 records with a negative quantity.
    This leads to inconsistent data.
    So for example, if there are 2 records in CATSDB for a person for a date, one has status 30, and a quantity of 8
    and there is another record with status 60 and quantity of 8
    If I do a full load, i get a quantity of 8 (the status 30 records)
    However, if there was one record already in BW for that person and for that date and a delta is loaded containing the same employee, i get a reversed quantity (-8) so the total in BW is now 0.
    Is this correct?
    It seems a full load, which gives a quantity of 8 is correct or is the total of 0 correct?

  • Training and event management: Book Attendee List for Business Event List

    Dear all,
        I know this:
        PV07: book attendee list for business event
        PV08: book attendee for business event list
       Is there a tcode to book an attendee list for a business event list
    Thanks a lot in advance!

    Hi Federico,
    I think.., no. Below are the tcodes available to book attendee,
    PV00 Book attendee for business event
    PV01 Rebook attendee for business event
    PV02 Prebook
    PV03 Replace
    PV04 Cancel
    PV07 Book attendee for list  for Business event
    PV08 Book attendee for business event list.
    Let me know if you found tcode for your requirement.
    Thanks,
    Karunakar

  • How can I switch a book purchase to an audio book purchase?

    Please help me figure out how to switch an iTunes "book" purchase to an "Audio-Book" purchase!
    I can't believe I made this mistake and want to exchange or cancel the book purchase and then buy the audio book version as new purchase.
    HELP Please - I feel like a loser user!

    Try
    http://www.2epub.com/
    or
    http://ebook.online-convert.com/convert-to-epub

  • HT4059 How to cancel a pre-order?

    Where do I go to cancel a book pre-order

    Hello alexfigueroa,
    Thanks for the question. To view or cancel a pending pre-order:
    1. Choose Store > View My Appie ID, then click Manage Pre-orders, which located in the Settings section at the bottom of the Account Information screen in iTunes on your computer.
    2. From the Mange Pre-orders screen, click the Cancel button to the right of the pre-order item you would like to cancel. You'll be asked to confirm your pre-order cancellation.
    iTunes Store: About Pre-orders
    http://support.apple.com/kb/HT5714
    Thanks,
    Matt M.

  • Cancel 101 movement with Inspection lot of closed financial period

    Hi experts,
    we are having the following problem.
    We have a 101 movement with creation of Inspection lot, which was done in a finance period which is already closed.
    Now I have to cancel this movement, but I get the error M7021 with VOR, which means that I am not allowed to cancel it, because of the period is already closed.
    But we also can not open the period.
    Which possibilities do I have?
    Maybe MI10 movement?
    Kind regards

    Hello Jürgen,
    thank you for your help.
    I am confused now.
    Becasue normally I am logged on in german and now I did check the english one.
    Deficit of BA St. in QI prev. 127 M2 : "material number" 0001 "sloc" "batch"
    But here I get QI prev, but in the F1 help there is no QI or prev.
    In german I get VOR and there in the F1 help it is written, that VOR is previous period (so I think equal to PR in english).
    Now I am a bit confused.
    But anyway, the thing is that we have to empty the stock.
    Kind regards for every help, I think there is no possibility to cancel that booking as the period is closed.
    @ Biju K, to be honest your way would really be the only correct way, but at the current situation it is a bit special.
    I will do a MI10 booking.

  • Approve and Cancel Button

    In the HR portal,When the user requests for a booking , The Manager Can Approve or Cancel that booking based on the Requirement.But In HR portal,when the manager is logged in, when he opens the booking .it is just showing the Forward and cancel assignment Buttons.But there should be Approve and Reject buttons with the same.Can any please give me an idea about this.How can I get a solution for this.

    Try WF_NOTIFICATION API.
    http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=WF_NOTIFICATION&c_owner=APPS&c_type=PACKAGE
    http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=WF_NOTIFICATION&c_owner=APPS&c_type=PACKAGE
    HOW TO PRINT ATTRIBUTE VALUES ON SUBJECT LINE [ID 351096.1]
    Is it Possible to Create on the Fly a Message Attribute for Showing it as a Document Attachement in a Notification? [ID 973710.1]
    API to reject APINV workflows when upgrading from 11.5.10.2 to R12
    Thanks,
    Hussein

  • I think I'm going to throw in the towel on this Book thing!

    I spent a couple of hours making a lovely book. I sent in my order, carefully notating my new shipping address (I have moved).
    I get a confirmation e-mail from Apple which shows my old shipping address, not the one I carefully selected.
    Quickly canceled the book--that is a lot of money for something I may never receive.
    Go back to iPhoto to order the book again--pull up my book--only the cover page is there and all the photos and captions are gone!
    So I went to my Apple account and deleted the old address completely (even though it showed my new shipping address as the default).
    Started working on the same book (again) and decided to save my book as I go along.
    There is no SAVE button?! What?
    So I read some notes here--and decided to close iPhoto after every few photos to force save the project.
    So I go back to my project, and all the thumbnails are gone--just the book pages I had done are there.
    Please tell me--so there is no way to save your work? All you can do is work on it, leave it up on your screen if you have a life, then come back to it later?
    Thanks for any help I might get~
    Sheree

    Instead of closing iPhoto to make sure you've saved changes see the tip at the end of my signature. It will do the same except with much less effort.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Making and cancelling reservations

    I tried making a reservation program. however, i am not so conversant with using threads. the program is supposed to make a booking for a client. the client can make more than one booking and they can also cancel their booking(s). how can i achieve this using threads? the code i came up with is:
    import java.util.Scanner;
    public class Reserve
        private static int[] seats = new int[20];
        public static void main(String args[])
                for (int i = 0; i < 20; i++)
                 seats[i] = 0;
                 Scanner input = new Scanner(System.in);
                   int choice = 1;
                   System.out.print("Please enter 1 to book a seat or 2 to exit: ");
                   choice = input.nextInt();
                    while (choice != 2)
                       int seatnumber = 0;
                         // If they choose a seat, attempt to book it.
                         if (choice == 1)
                            seatnumber = bookseat();
                               // Booking a seat was successful.
                                System.out.println("You are in luck, we have a seat available!");
                                printBoardingPass(seatnumber);
                         else
                             // Print an error message if they did not choose 1 or 2 for their choice.
                             System.out.println("Invalid choice made.");
                             choice = 0;
                            // No seats were available.
                            if (seatnumber == -1)
                                System.out.println("We are sorry, there are no seats available.");
                                System.out.println();
                            // Reprompt for a choice
                            System.out.print("Please enter 1 book a seat, or 2 to exit: ");
                            choice = input.nextInt();
        // This function checks for seats and returns seat number or -1 if full.
        private static int bookseat()
            for (int i = 0; i < 20; i++)
                if (seats[i] == 0)
                    seats[i] = 1;
                    return i + 1;
            return -1;
        // This prints out a boarding pass message with their seat number
        private static void printBoardingPass(int seatnumber)
            System.out.println("Boarding pass for seat number: " + seatnumber);
    }

    timon_zed wrote:
    would that apply to the use of threads or for a regular class? straight across the table. how can i develop something to develop a booking and cancellation program using threads? i was told i could make it easier to use if i made it using threads, but am just a newbie. so how, please how can i use threads for this program?Whoever told you that it would be easier to use threads, was wrong on two counts. First, it almost certainly won't be any easier. Secondly, you shouldn't use threads for that reason anyway.
    If this is a homework assignment and if your teacher didn't tell you that you have to use threads, then don't. You're just making trouble for yourself.
    If this is a homework assignment and if your teacher did tell you that you have to use threads, then tell us exactly what that requirement is. And don't be deceitful about it being homework; people around here usually don't want to do your homework for you, but there's a general willingness to help.
    If this isn't homework, but a real world project to build some kind of booking system...then, threads may or may not enter into it. (Well, it would almost certainly enter into it in some sense, but chances are in the real world you'd use some kind of existing system that handles the multithreading for you.)

  • Clearing incorrect booking entries

    Hi,
    How it's possible to clear already cancelled bookings (because it was a data entry mistake) in "Booking Dialog" tab so that they wouldn't obstruct the view of the remaining truly booked modules?
    Having a mixture of green ticks and red stops in this tab slows down the very process of booking for the end users as it becomes difficult to realize visually what is already booked and what is not. Especially when a history record is kept anyway in the "Booking History" tab.
    Thanks.
    Janek

    Hi Janek,
    When you delete the relationship of the particlar module in pp01 , your problem get solved . It will not appear in the Booking Dialog .
    <b>Note :</b>
    In your query you have mentioned that , it is difficult to visualize the green ticks and red stops but the actual purpose of the Booking dialog is to know what is the activity that has been done by a student .
    When you want to overcome this difficulty , you can for Booking History tab where only booked modules comes into picture as you have mentioned .
    The booking dialog comes into scenario, when the fees is collected for the students for each module booking the student is doing .
    So , it good that the each activity is recorded in the system what the student/administrator does . Additionally , the students can cancel the booking module giving the cancellation reason as <b>"Incorrect Entry"</b> .
    Regards
    Gajalakshmi

  • LSO hcm_learning: cancelling cource registration fails

    Hi,
    We have following problem with in LSO. When user tries to cancel participation for booked course comes error and course is not cancelled. Following error message appears:
    Name                     Value
    sap-params     cmM9MSs=
    htmlbevt_ty     htmlb:image:click:null
    htmlbevt_frm     htmlb_form_1
    htmlbevt_oid     htmlb_image_1
    htmlbevt_id     REFRESH
    htmlbevt_cnt     0
    onInputProcessing     htmlb
    sap-htmlb-design     
    470D935EF4310040000000000A140313-es     1
    Parameter_RowCount     2
    Parameter_AllColumnNames     NAME/VALUE/
    Parameter-TS     NONE
    Parameter_VisibleFirstRow     1
    rc     1
    What could be the reason for this?
    Thank you in advance.
    Sanna

    Hi
    The participant whom you are trying to cancel is booked for which delivery method course?? and what is the payment method??
    System does not allow to cancel the participant if there is an invoice created against to him/her. Check if there is any invoice attached to this participant, if yes either cancel the
    invoice or create a credit memo after this, you should not face any problems in cancelling the participant...
    Hope this solves your problem

Maybe you are looking for