Cancellation of cheque date

Hi Gurus,
I have a requirement like: Doc Posting is date is: 15/07/2014 and payment date is: 16/07/2014. Aging should be calculated?
The Biggest task is: Say they had a posted a vendor liability document on 15/07/2014 and payment has been made for the same on 16/07/2014.
The aging would be 1 one day. On the next day 17/07/2014 they realised the need to cancel they cheque for some XXXX reasons.
The cancellation of cheque is picking up the the document posting date which is: 15/07/2014. When they reissue the cheque for the same vendor on 18/07/2014. The aging is calculating as :15/07/2014 - 18/07/2014 which is 3 days. But client want the aging to be calculated from the reissue of the cheque.
Any help on this is really appreciated...
BR
Rohit Raj....

Hi Tejas,
The client pays all there vendors thourgh APP. So manula cheque updation is ruled out.
The manual Clearing is also no done at the client place. even this ruled out. They will pay complete vendor liability amt on the next day.
They will void they cheque through FCH8 which you mentioned. They have the same report which will give them the documents which got voided....

Similar Messages

Automatic MOLAP cube : Proactive caching was cancelled because newer data became available

When I process the cube manually after processing Dimension, It works fine. But when I append data into database column, It performs proactive caching, at that time it fails.
Sometimes: It does not get key attribute because measure gets processed before dimension
and sometimes it gives error:
Proactive caching was cancelled because newer data became available Internal error: The operation terminated unsuccessfully. OLE DB error:
OLE DB or ODBC error: Operation canceled; HY008. Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'call dim Monthly 201401 2', Name of 'call dim Monthly
201401 2' was being processed. Errors in the OLAP storage engine: An error occurred while the 'MSW' attribute of the 'call dim Monthly 201401 2' dimension from the 'callAnalysisProject' database was being processed. etc....

I have also seen this error occur in other scenarios.
In the first if you have set Pro-Active caching to refresh every 1 minute and your query takes 2 minutes to refresh the error above can be displayed. Solution increase your refresh time or tune your Pro-Active caching query.
In connection with the above if your server is limited on available resources this can also cause the slower query response times during refresh and the message above.

Cheque dates in F-58

Hi Experts,
An open AP invoice item dated Nov 02, 2009 needs to be paid. It was paid out via F-58 and Oct 30, 2009 has been entered as the posting date. From the user's point of view, its an audit issue because the cheque date is Oct 30 for an invoice that is yet to be created.
I know that this wouldn't have happened if it has been paid via F110 because it can be filtered out by APP. And I think its the behavior of SAP for this t-code. But I just want to be sure before I go back to the user. Can someone confirm if F-58 doesn't really check the posting dates of the payment transaction vs AP open item? Is there some customizing setting that I should have done? I have searched the SDN but there doesn't seem to be anything related to this.
Thanks to advise.

hi
in f-58 the user could have selected 'Additional Selection' --> others.
here you could have mentioned the documents for other criteria for e.g. 'posting date'.
this would have ensured that he gets only documents for the mentioned posting date range mentioned for Clearing.
thanks
eashwar

Voided cheque date on cheque register report

My customer would like to see the Voided check date on the check register report.
Currently we only see the posted date and there is no way to see when this check was voided (if it was).
Thank you
Edited by: Plante Guy on Apr 2, 2008 4:14 PM
Thank you all for your answer.
What a waste of time.....
Edited by: Plante Guy on Apr 2, 2008 4:15 PM

Hi Plante
I am a B1 user (quite new) and also had a Date problem which I had to improvise for an answer. i am not sure if this will be helpful. My issue with the Date is that Posting Date is not a useful Date in any report or Form and what is actually needed is the Document Date, or Cheque Date or Invoice Date etc. i think SAP B1 2007 is using Posting Date everywhere instead of the real Document or Cheque date. i have tried to find the logic behind this but did not succeed and I think it is a mistake in SAP that they will have to correct sometime.
So I gave up trying to find a way of showing the Document Date and decided to use the POSTING DATE as the Document Date and I just renamed the Posting Date to Document Date. This seems to work fine for me because as I said the Posting Date is the least useful Date for a user so if your problem is similar to mine than perhaps use the POSTING date and rename it to Void date.
Of course, the other solution is to set UDF for this purpose and FS to place this date wher you want it - this is only theory and in practice it may not work..
Good luck
Robert

Cheque Number and Cheque date

Hi All,
Can anyone let me know in which table I can get Cheque Number and Cheque date fields.
Regards,
Sandy

Hi,
Please check table PAYR and field CHECT and ZALDT.
Regards,
Ferry Lianto

Cheque date should be due date on which invoice are due.

Dear Experts,
We are making payment through F110. Now we are planning to run Automatic cheque printing two times in a month instead of daily.
But cheque date should be due date on which invoice are due.
Is it possible to do so, Please advice.
Thanks in advance,
Maurya shantanu

Hello Maurya,
Yes you can have the cheque date as due date provided you have one check for all invoices with same due date.
You can discuss with your ABAPer advicing him to pick the date for the check from the invoice due date filed.
regards
pbb

Cheque Number, Cheque Date

Hello Gurus
I need to get the cheque number, cheque date for a receipt(AR_CASH_RECEIPTS_ALL) applied on an invoice(RA_CUSTOMER_TRX_ALL, RA_CUSTOMER_TRX_LINES_ALL) in AR module. We are on Oracle r12.1.1 version. I' thinking this information will be somewhere in cash management or payments tables but could able to trace it. I'd really appreciate if someone can help me here.

Hi,
Please check table PAYR and field CHECT and ZALDT.
Regards,
Ferry Lianto

Cancel the cheque which is already cleared

Hello,
I need to cancel a cheque which is already cleared , can I do first FCH8 and the do a FBRA.
Please advise.
Thanks
SM

Hi,
Instead of doing FBRA, in FCH8 itself you can go for "cancel check payment" that reverses the pament docuemnt and the amount will be available for the vendor as open item
hope this helps
uma

Cheque Date

Hi Gurus,
I am making a payment on 2nd January with PDC of 5th January.
In which field we should enter cheque date?
Please revert asap.
Thank You
Regards,

Any transaction that you create in a prior posting period would require you to make that posting period Current.
Go to Admin > System Init.. > General Settings > Posting Periods..Highlight the posting period for March and click Set as Current

Feilds of cheque no & cheque date

Hello Friendz,
I am making one alv reort during this i am facing some problems which is realted with feilds of cheque no., cheque date,payment done against specific vendor& remarks.i went through the sap t-code zfbl1n but i didn't get any clue..
Plz help me out ....
Thanx in advance....
Regards,
Abhishek

Hello friendz,
First of al thnx for ur response,Sir i went thru this table PAYR but i didn't get any clue.my linking is all thru the T-code of zfbl1n which belongs to finance but wen i write query with using PAYR table or bseg table but it was not fetching the data...
Plz help me out dear
once again thnx for ur response...
Regards,
Abhishek

HT202197 How do I cancel a Verizon data plan for a lost ipad?

My wife has lost her ipad, which is the most current version. How do we cancel her Verizon data plan without having the ipad in our possesion?

Contact Verizon.
http://www.verizonwireless.com/support/

HT4157 Cancelling auto-renewal data plan on broken iPad

My iPad is broken. It does not power up. How can I cancel my monthly data plan auto-renewal that is costing me $30 a month?

You need to call the company whom you have the plan with. This is a user-to-user forum (as you knew when you signed up to it) and no-one here can do that for you.

Suspend not cancel autorenewal verizon data plan on ipad3?

Suspend not cancel autorenewal verizon data plan on ipad3?

I bought 2 Verizon 4g lte certified sim cards from ebay. When I put the new sim card in, I was able to set up a new account. Just make sure that the description says it can be used in Verizon 4g lte iPad. I haven't as yet suspended it but I will definitely pick the one that says cancel later. As I understand it, this option allows you to suspend it for 5 months without your sim card being deactivated. I doubt that I will wait 5 months, just in case that number is wrong.
It is a very aggravating experience and Verizon and Apple have both done a poor job in explaining what happens if you pick the cancel now option. It isn't as bad with AT&T because it is much easier to get a sim card from them.

Job cancelled While loading data from DSO to CUBE using DTP

Hi All,
while i am loading data frm DSO to CUBE the job load is getting cancelled.
in the job overview i got the following messages
SYST: Date 00/01/0000 not expected.
Job cancelled after system exception ERROR_MESSAGE
wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

hi,
Are u loading the flat file to DSO?
then check the data in the PSA in the date field and replace with the correct date.
i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
so clear the data in PSA and then load to DSO and then to CUBE.
If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

Cancellation of cheque date

Similar Messages

Maybe you are looking for