Cancellation of old invoice can't be post, because the juristiction code
We change the tax juristiction code structure for Canada, according to some OSS notes. The total length were 4, now changed to be 13.
However, when we cancel the old invoice created before the structure
change, the cancellation invoice can't be post to accounting because
the cancellation invoice copies the same length of the juristiction
code from the original invoice, does not match with the current length
of the juristiction code.
Now the cancellation invoice is hold in the VFX3 block list forever,
can't be clean up. Is there any way to clean up the cancellation invoice, or skip the juristiction code check in FI posting?
Hello,
I cannot contribute on the FI side but it is possible to get rid of the errouneus cancellations via note 388489. But there are some restrections. for instance you won't be able to recreate them again, the original document will remain cancelled. You will need a manual solution after that. for example you can create a debit or credit memo.
Balazs
Similar Messages
-
Hi there.
I did a factory restore and then restored it with iCloud back-up. I have been using lots of Apple products and i have used three different email adresses. Almost all apps restored perfectly but everytime i try to play a song in the Music app, i asks me for a Apple-ID i had no idea i have used.
Hence:
I lost my password for my original iTunes account
I can't recover it because the email address it is registered under is not longer valid
How can I access my old account?
Can't find a place to change the email address to my new one without the password which I no longer remember.
There is no way to just erase Apple-ID's on my device either.
What to do? Should i ju give up and start from scratch and delete 2 years of stuf?
Cheers!If you can remember the answers to the security questions when you set up that account - I think that you can reset the password without needing email authentication. You can try it here. Read it and see if it's possible. But if you can't remember the answers to the questions it will not work.
http://support.apple.com/kb/ht1911 -
I tried to uninstall my really old iTune version but it came up the error code: 2324. I then copy the data of the new version of iTune from my friend's disk C and paste them onto my disk C. However, it seems to work but appear another error code: -42404. I don't know what's going on. Can someone help me please? I just got the latest iPod nano and it ***** that I can't synchronize my music! :/
Cheers!Zac henderson wrote:
...Couldnt restore ipod, error code (9) " ...
Try here > Configure security software -
i changed my email address and now I can not access iCloud because the old address keeps popping up.
Is this happening on your iOS device or your Mac?
And is the iOS device or Mac signed into the old ID ("email") in Settings>iCloud (System Preferences>iCloud)? -
I want to cancel my account but can't remember my account, the only info i have is my credit card... what should i do
If you go to the Adobe Cloud login page you can reset your password by clicking on forgot password—all you need is the email address you used to subscribe:
Adobe ID
Once you've reset the password you should be able to login and cancel under Manage My Account -
Hi folks,
Desperate for some help!
I have a very cluttered, slow Macbook Pro running 10.7.5. Bought a 2TB WD My Passport for Mac (2TB) with the intention of transferring my many, many files and folders over to it, to increase my memory and boost the performance of my Macbook. (Also handy to have files on the go).sktop
I transferred everything (all files off desktop, documents, photos etc) using drag and drop.
Then I trashed all the files, but did NOT empty Trash because I wanted to check the process had worked
Now, when I plug in my hard drive, and open it up, all my files and folders are there, but with little arrows on the bottom left of the file/folder. When I go to open any one of them, I get this message:
"The alias “X” can’t be opened because the original item can’t be found."
I don't know what to do. Is this because of the way I dragged and dropped the files? I'm guessing so. Or is it because I still have the items in my Trash? (I'm obviously petrified of emptying the Trash now though) Is it because of my OS?
Apologies, I'm a novice to this (hence why my 4 year old mbp is running so slowly; it's got 4 year's worth of work on it, and now I obviously don't even know how to transfer files properly to an external HD) but I'd really be ever so grateful for your help. I just want to successfully back up my files to this HD so my mpb runs faster. I'm now terrified I've corrupted my files. I don't even understand what an Alias is.
Would love to hear from you! I'm totally new to these forums so hope I've posted right! Thanks!sibby22 wrote:
...Now, when I plug in my hard drive, and open it up, all my files and folders are there, but with little arrows on the bottom left of the file/folder. When I go to open any one of them, I get this message:
"The alias “X” can’t be opened because the original item can’t be found."
It sounds like what got created on your external is a collection of aliases which point to the original files and folders but aren't actually copies of the files and folders themselves. The original items have been moved to the trash so even if they could be found, they couldn't be opened. As a test, pick a file (not a folder) on the external that should be large and see what size it actually is (Get Info). Aliases are smaller so you can tell the difference apart from that little arrow (the Get Info box will also identify the file as an alias). Dragging the files to the external should have automatically created copies rather than aliases unless you held down the Command and Option keys while dragging.
In any case, you were wise not to empty the trash; to be safe get those important files back out of the Trash so you can start over. But this time, try moving a few at a time and let us know what happens. -
I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore... -
Cannot delete file: The operation can't be completed because the item "DataReferences" is in use.
I have a My Book TB Drive where all of my Time Machine backups go to. I decided to delete some older version of backups. They ended up in my trash can. When I deleted the items in my trash can, all of them erased with the exception of one file. This file refuses to go! I have tried "Empty Trash", "Secure Empty Trash" and holding the Option Key + "Secure Empty Trash". Each time the I get the following error: The operation can’t be completed because the item “DataReferences” is in use.
If I unplug the My Book TB Drvie, the file dissapears from the trash can. If I plug it back in, it reappears.
I am not sure what to do anymore. Any suggestions?
Thanks!
MacMini
Mountain Lion (Error originated in OS X)
My Book TB (External Hard Drive)I found an article on how to allow third party apps. Posted it below just in case if anyone is interested.
http://www.computeraudiophile.com/f11-software/your-security-preferences-allow-i nstallation-only-apps-mac-app-store-and-identified-developers-12789/
Anyhow, I was able to do the double click on the trash it.I tried the "fast" version and the "really stuck" version and unfortunately, none of the options worked.
Any other suggestions? -
The operation can't be completed because the original item cannot be found.
Hi all.
I've been having this problem for a while. I have a file server on a windows xp system with multiple drives attached to that pc (internal and external).
When I try mounting one of them from the finder I get the message :
+*The operation can’t be completed because the original item for “Movies” can’t be found.*+
Other drives on the pc mount just fine and actually the problematic one used to mount fine and then suddenly it seems that the mac lost the path to the disk and can no longer find it.
I tried reformating the drive, changing the drive letter, and naming. It worked for a while then the drive got lost again
Its a WD drive formatted to ntfs (Identical configs and brand to all the other working drives) Its not a drive defect either. Its happened more than once.
I'm quite knowledgable when it comes to computers but this has been a dead end for me and I'm sure for others as well.
Please HelpI was about to post exactly this question. I have suddenly lost access to the folder on my shared network drive although the drive itself is still visible. I get the above error message when trying to open folders within. I have tried connecting through various routes such as Go - Connect to server ... but its the same.
A discussion thread elsewhere talked about deleting multiple share point entries ... over my head though.
Hope someone out there knows the answer - and how to explain it in plain english -
Hey all,
I hope someone can help. I am running 10.7.5 OSX currently on my Mac Book Pro. I recently got a new Windows 8 desktop. A ceap one running Windows 8. I currently have 5 drives shared over my home network. 3 are working just fine (the 3 I just put on the network today). The other 2, however, were previously on my old Windows Vista computer also shared over my network. My Mac Book Pro had access just fine (I set up sharing on my vista comp) and everything ran smooth. Today when I hooked up my new Windows 8 computer and put the 5 drives on and shared them via my network, same way as I done before, 3 are working fine but the two original drives give me an error when I try and access them from my Mac over my home network. They both show up with the correct names but when I try and access them it tells me:
The operation can’t be completed because the original item for “M&V” can’t be found.
M&V is the name of one of the drives. Here is the trouble shooting I have done:
- Renamed the drives multiple times
- Tripple checked my permissions
- Checked for updates and installed both on my PC and Mac
- Restarted my PC and Mac
- Tried Both of my dual frequencies on my netowork
- Tried hooking up with ethernet cable
- Changed the user name and password for my shared access on my PC multiple times and put in the correct info on my Mac
- Tried taking away all passwords (unsecured)
- My other Windows PS's can access all drives just fine
But still I get the above error. I have isolated it to an issue with my Mac. I was thinking maybe if there is a way to have my Mac forget the shared drives and I can re-add them and put in my password, I am not sure if that is even possible. I am at al loss on what to do. Any help you can give would be greatly appreciated.I am having the same exact issue and I've been busting my testi-balls to figure it out. I've got 15 years experience in the computer game and still can't figure it out. I see a lot of people having similiar issues, but no one seems to have an answer for MY issue, which is virtually the same as the OP.
Brand new Macbook Retina.
Windows 7 x64 Machine.
ALL drives shared with ALL permissions of ALL accounts manually inserted on the Windows 7 side.
ALL other PC's in the house can access the drives on the Windows 7 machine without issue.
Only the Macbook Retina has the problem connecting. Every Windows drive I shared is visible under "network" in finder, but when I click on any of them it gives the quoted error message the OP stated.
PLEASE, if anyone finds a fix for this, let us know! -
The operation can't be completed because the item "PkgInfo" is in use.
When I try to replace an application in my applications folder with a new version that I have downloaded from the net by copying over the old one, I get the following message:
The operation can’t be completed because the item “PkgInfo” is in use.
I have the original application in my Apps folder, I drag in the new version and then get that message so I have to manually take the application to the trash and then I can put the new version in the Apps folder. This has happened on many occasions since upgrading to Snow Leopard.
Any ideas anyone on why this is happening and how to fix it?
Thanks in advance!This is happening to me on 10.5.8 as well, so it's not a Snow Leopard thing.
Generally, the copy works on trying it a second time. -
The operation can't be completed because the item "folder name" is in use
Hi everyone,
I think this is quite a common issue but I don't find it really easy to find a solution.
I have a folder containing a folder and no files on a server that I cannot delete, for the life of me.
Whether I use shortcuts or drag the main folder to the bin, I have the same result "The operation can't be completed because the item "secondary folder name" is in use". This folder is just 1 year old so, obviously, I have restarted the computer more than once since then which means that the folder is NOT in use.
I'd like to clean up a bit and remove some stuff and this is bugging!
Hope someone can help me.
Thanks in advance!If you don't have other backup data on it, reformatting external drive could solve the problem.
-
The operation can’t be completed because the item “libsmime3.dylib” is in use.
This is the error message I get when i try to install the 7.0.1 update. I found a cisco folder on my MAC and tried to Trash it. It won't leave. Maybe I need it... Some of it did Trash, but what ever is left continues to prevent 7.0.1 from installing.OK I looked at an old Apple forum and someone suggested Trash then Restart then Empty Trash, and it worked. Cisco is gone, Opt is gone, and I was able to load FireFox. I had to give admin passwords to do this too. Why an old weird game or library folder could cause such obstacles is a wonder. But I'd rather wonder about other things...
-
While using my Mac OS X Version 10.6.8 to burn a DVD-R I keep getting the error message: "This disc can't be burned, because the device failed to calibrate the laser power level for this media."
So, I tried the iDVD and got the same error message.
Can anyone out there help me? I've tried both a DVD - R, and a CD.
I made a short 2:20 minute presentation from iMovie and used the "share" to iDVD, then to iTunes, then I tried exporting it to Quicktime and saved it on my desk top. That is when I tried burning by opening the blank DVD-R in the finder then draging the movie on to it and selecting the burn option. Thank you for your time in helping me with this frustrating problem.
Peace, PyxidisI have had that same problem, but it was unrelated to any upgrade.
In my case the optical drive was simply failing, and I replaced it - it was a Powerbook, about eight years old.
It is possible that it's unrelated to Lion, as unlikely as this may seem, since you've just upgraded.
Optical drives seem to be the most life-limited component in these computers. The laser just seems to get weak with age. -
iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah
Maybe you are looking for
-
How to read xml file and place it into an internal table...
hello all, can any one help me in - how to read xml data file (placed in application server) and placing the same into an internal table (remove the xml tags or say fetching the xml data without xml tags).
-
Splitting and renaming clips in FCE4
How can I split a clip up into smaller clips and rename then? Whenever I try to copy or duplicate them I get the same copy for all. I was trying to change the name as well and it seems I can't make them independent of each other. Does anyone know how
-
(internal) Tables obsolete as parameter in function modules in ECC 6.0
Hi All, I followed Steps 1 and 2 in the thread but when I use the following select statement I get a dump with the error enclosed. Step1. Created a structure ZDFKKCOHI which is a replica of DFKKCOHI. Step2. Created a table type ZDFKKCOHITABLE with l
-
Installed third party applications not showing Application folder?
Hi, i've installed third party application outside from AppStore. i chosen "Anywhere" option on Gate keeper. however its not proper installation process hence how can i install? if i install third party application which is get .DMG file from some on
-
CS4 will not work with Snow Leopard
Does anyone know what the problem is? I have been reading on other message boards about CS4 programs crashing. I can't even get mine to open. Does anyone know a fix or something that can help?