Cancellation & Reversal of GR.

Hi ,,
Basic Doubt....
I have a GR using 101 Mvt type and i have to reverse this so i do a reversal using
102 mvt type....and everything is set.
I have a GR using mvt type 101 and if i want to cancel this i go for the cancellation of material document which will inturn trigger the same 102 mvt type.
Is there is any difference in the postings of these transaction ...if so what are they ....and can anyone say me which wud be advisable to do a reversal???
and anyone can say me in which tocde i can see all the accounting entry postings..
Regards
Balaji

Hi Balaji
Logicaly speaking both trnx do the same work as u experienced
in MBST u can directly Reverse document by just entering Doc. no and date
which is quite easier than reveral using migo
Vishal...

Similar Messages

  • Billing cancellation/reverse

    Dear guru's
    Can any body explain about how to cancell/reverse  sellected line items in invoice, if invoice is with more than one items
    The scenario is i want to reverse the some defected items wich are in BOM, and the same or defferent materials i want to give as a free of cost by reff. to that cancelled invoce
    its very urgent pls help me
    Regards
    Gowrish

    Hi Caprin,
                   with reference to your issue,  you need not cancel the invoice, you can map this scenario as sales returns and can be filled with subsequent free of charge delivery.
         process for sales returns:
       a)  va01   select document type RE , with reference to billing document, in that u can choose whatever the line item and  desired quantity also.
      After that   u can do the post goods receipt and accordingly u can deliver the goods at subsequent free of charge delivery.
    regards,
    ram

  • Cancel/reverse service entry sheet

    Hi Experts,
    Please let me know how to cancel/reverse one accepted service entry document.
    After revoking acceptance also system is asking for reason for movement. But nowhere I found to enter that against the movement type 102, through the transaction ML81N.
    Bye.

    Indranil
    For me while reversing the Material document in MIGO i got the following error message.
    Transaction code MBST (=> use transaction ML81 / ML85) not defined
    Message no. ME027
    Diagnosis
    The SAP transaction code for the function you have selected is not defined in the system table 160.
    Can you tell me wht I need to do?
    Regrads
    Rammohan.

  • Which Field is indicate cancel/reverse in MBST

    Hi
    Could you tell me which table/field can indicate one material document has been cancel/reverse?
    Thanks
    Henry

    Hello
    I little elaborate.
    There is not exist indicator for cancel/reverse. But you may find documents yourself.
    For example:
    you have material document no 5000000001 with 101 movement type.
    When you make cancel this document with 102 m/t you will have new document no 50000000002.
    This new document have SMBLN = 5000000001 and SMBLP = position of old document.
    Also exist view M_MBMPS. If you fetch this with MBLNR = 5000000002 then you see primary document 5000000001 into field SMBLN.

  • How to cancel/reverse confirmation of service in SD module?

    Hello
    How to cancel/reverse confirmation of service in SD module?
    By confirmation of service I mean document which we can see in SD documents flow (if scenario is without goods movement).
    User need to delete delivery but confirmation of service and sales invoice were posted. We reversed invoice but do not know how to cancel/reverse confirmation of service.
    Additionally u2013 is there any transaction where I can look at confirmation of service? It is NOT possible to look at this document in flow documents.
    Thank you in advance.
    Arek

    Hello
    Thank you for response.
    It was NOTcreated in CS module. There is nothing in iw33.
    It is confirmation of service in SD module.
    Flow:
    - you create sales order
    - you create delivery with reference to sales order
    - you post goods issue (if quantity for picking is 0 u2013 no movement in stock) confirmation of service will be created by the system. Now I need to cancel this document.
    Best regards
    Arek

  • Can NOT cancel/Reverse GI with a date before the actual GI date

    Hi
    can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
    thanks

    >
    jo jo wrote:
    > Hi
    >
    > can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
    > thanks
    Hi Jo Jo,
    I am not sure if i understand your problem correctly.
    As far as my understanding goes you are trying to reverse a GI on a date before Actual goods issue date.
    If you have PGId on a date before planned GI date the system will update that date into Actual GI date and not planned GI Date.
    For example if you planned GI date was 1st April 2008 and you did PGI on 28th April 2008 Actual GI date will become 28th April 2008.
    So if you try to reverse PGI before 28th April you wont be allowed to as you cannot reverse a goods issue that has not happened.
    Hope it helps.
    Post furthur if i had misunderstood your problem.
    Regards
    Abhishek

  • 'In Process/Cancelled/Reversed' document cannot be updated. Message no. 4F2

    Hello Experts,
    During Updating ARE1 document through J1IA101 t.code in the export under bond scenario I am getting the message 'In Process/Cancelled/Reversed' document cannot be updated. Message no. 4F2.
    Can any body help me in this case?
    Regards,
    Sandeep

    Hai Sandeep,
    Please check setting maintained as per details
    ARE1 Process
    Regards,
    Mani

  • Post Goods Issue (PGI) Cancellation /reversa

    What is the difference between Post Goods Issue (PGI) Cancellation /reversal and Returns Process?

    Hi,
    PGI means actual movement of goods from the plant to the customer. So your plant stock will be reduced.
    The system will also post the inventory value to the Accounting. That is Cost of goods sold will be Debited and Stock in hand will be credited. This inventory value is the Cost price (Condition type: VPRS).
    Reverse or Cancel the Goods issue:
    You did the PGI. But you have some problem in that delivery document. So you want to reverse the PGI. When you reverse the delivery, your Plant stock will be increased. The system will also create the Accounting document with the reverse entries. That is Cost of goods sold will be credited and Stock in hand will be debited .T. code: VL09.
    Return:
    You have created the sales order, delivery, PGI and Invoice. Now your customer returns some material. Then you need to create the Return order, return delivery and Credit memo.
    Regards
    M. Lakshmi Narasimhan

  • How to cancel reversed document via MBST

    Hi Gurus,
    is there any way how to reverse material document cancellation? I mean revese document cancelled via MBST.
    I tried procced via MBST, but got error M7067 (all items of the material.doc entered have already been reversed.
    I need to process this step due to wrong period booking.
    Thank you for help!

    Cancelation via MIGO does not help. Still got the same message as through MBST:
    All items of document 5000900204 already cancelled/reversed
    Message no. M7067
    Diagnosis
    All items of the material document entered have already been reversed.
    System response
    The system cannot take any items from this document for reversal.
    Procedure
    Do you want to display the list of cancelled material documents?

  • Cancel/reverse a partial payment document / check

    Issue is:
    There is 1 payment doc for 2 checks issued.
    Check 1: Encashed by the vendor
    Check 2: Issued but not encashed and we want to cancel the check 2 and reverse the payment doc partially and then move the AP cr to u201Cunclaimed property liability accountu201D.
    How could this be doneu2026 Following tcodes  give errors as below..
    1.     FBRA or FB08 gives..
    Document includes already cleared items - reversal not possible
    Message no. F5308
    2.     FCH8 for check 2 gives..
    Document BRN1 4200023157 is not purely a clearing document
    Message no. FS601
    Diagnosis
    Payment document 4200023157 in company code BRN1 also contains the clearing document number 4200024802 in addition to its own clearing document number in line item 001. As a result, the document cannot be reversed after resetting the cleared items.

    Hi,
      As only one doument got generated for two open transaction, now indivual reversal is not possible. Only you can do manual transafer posting.
    Abhi

  • Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

    Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
    There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
    The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001  904  1110500002  does not exist (Check your entry)"
    This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
    I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
    Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
    Please advise on how this process should happen.
    Regards.

    Hi TQ,
    Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
    Can you elaborate more in detail how you solved your error few months ago?
    Thanks and regards

  • Cancellation / Reversal of Credit memos and Check for payment

    I have few cases where the credit memos and check for payment documents have been keyed with an incorrect posting date.
    What should be best approach to reverse these transactions.

    Hi Somchitra,
    in such situations ideally you would use the cancellation document standing on the original document, alas, a credit memo has no target document.
    You will need to create an invoice with exactly the same data as in the credit memo & then internally reconcile these transactions. If the credit memo was in itself generated from an invoice, you need to cancel that reconciliation first. After that you re-create the credit memo with exactly the same data, just with the correct dates.
    To cancel the cheques for payment you need to cancel the payment itself with the original document date & 'Cancelled' will be put in the 'Remarks' on the cheque.
    You will then need to recreate the payment with the correct dates.
    If you have already confirmed the printing of the cheque, you'll need to issue a new cheque number & destroy the printed copy, if it hasn't been printed, you can select the appropriate number in the 'Cheque number confirmation' window.
    As always when correcting transactions, please keep an eye on the stock transactions & make sure they are correct. Also, for auditing purposes, always enter an approriate text in the 'remarks'.
    All the best,
    Kerstin

  • Cancel / reverse billing document cancellation document?

    Is it possible to configure where we can cancel the billing document cancellation document?
    Right now, if we cancel a billing doc using vf11 we get a new cancellation document generated.  If we try to cancel that, the system says cancellation of this type not allowed.
    Will it work if we configure to allow a cancellation document type on a cancellation billing document?
    My problem is a cancellation document was created that is incorrect and can't be fixed - work order used is closed and they cannot open it back up.  So this document is stuck unless I can somehow reverse or cancel it.
    Thanks gurus - will promptly award pts for resolution.

    Thanks for checking - the original bill did not have the same issue. It was done some time ago using the same work order number as a reference that it posted to successfully.
    Since that time, that work order has been closed completely and allows no further postings to it.
    For some reason, a cancellation vf11 was attempted on that original bill & it tried to post back to that original order # in the cancel.  Since it had been closed, we run into this as there's no way to update that order # since it just uses the original one.  So now we have a cancellation document failed in accounting due to this message and can't fix it.
    A credit memo should have been done due to the order status but they did vf11 anyhow and we're left with this problem.
    Thanks much gurus

  • Cancel Reverse Document

    Hi Expert,
    I encountered a serious problems with cancel outbound delivery with VF09.
    I reversed an outbound delivery in previous month, however I forgot reversal date. I should have set it to the date in previous month, however I left it the current date. So, it the date in Acc. document is not correct.
    Is there anyway to reverse this "reverse document".
    Thanks

    I think Sadashivan is correct. Afer reverse the outbound delivery, we can't do anyning more with it ( I mean reverse the reversal document or cancel it). I just tried to negotiate with the Accounting guys, and create a GI with a new mvt.type in the same day with the reverse document in this month, and vice-versa FI posting. I afterthat, reverse this new document in previous month, and continue the sales process.
               However, I think it's only temporary solution to make the GL balance. If you have better way, please share with us
    Thanks so much

  • Cannot Delete / Cancel  / Reverse Service Purchase Order. Please Help....

    If you create a service entry sheet, process the service entry
    approval,post an invoice for an amount greater than the Service entry
    then, cancel
    the entry sheet and add a new service specification (i.e. same entry
    sheet), the following problem occur:
    1. You can no longer cancel the invoice if the services of the entry
    sheet are deleted.
    2. After changing the entry sheet and renewed acceptance of services
    performed, a posting takes place where the value differs from the
    value of the entry sheet.
    Steps to Reproduce:
    1. Create a Service Purchase Order of $2,675.00
    2. Create a Service Entry against the Purchase Order for $2,675.00
    3. Approve Service Entry against the Purchase Order for $2,675.00
    a/c postings Dr Expense $2,675.00
    Cr GR/IR $2,675.00
    4. Create an Invoice against the Service Purchase Order for $6,452.50
    a/c postings Dr Expense $3,777.50
    Dr GR/IR $2,675.00
    Cr Vendor $6,452.50
    5. Create Credit Memo $1,537.00
    6. Revoke the Service Entry against the Purchase Order for $2,675.00
    I am expecting the Reversal of the Service Entry figure is $2,675.00, but instead, the Reversal of the Service Entry figure is $1,537.00. Why is that so? I need to be able to Reverse/Delete the PO. Please help...
    Thank you.

    Hi,
    please check the folowing notes for further information:
    856682    Goods receipt document cancelled with incorrect value
    499575    FAQ: Invoice verification/goods receipt in service      
    440942    GR cancellation not equal to GR                         
    Regards,
    Edit

Maybe you are looking for