Cancelled one item 5 working days before, when receive the refund

I cancelled one item 5 working days before, when will I receive the refund

Not Enough Memory typically refers to RAM.  How much RAM do you have on your 64-bit OS computer?  Do you have other programs running that may be using most of the memory?

Similar Messages

  • Sales order schedule date is a (working) day before Scheduled ship date

    In MRP/MPS planning, the forecast consumption is occuring for all sales orders at a date (sales order schedule date) which is always a working day before the Scheduled Ship Date (SSD). What is the logic?
    Time fences are not used.
    E.g. Sales order is scheduled to ship (SSD) on 30th Nov, in forecast set > Forecast items > Consumptiion > Detail, the sales order schedule date is a day before SSD.

    Hi,
    This is a complex issue; best solution is by using APO/GATP.
    If not, then in ERP only, the second best is:
    1) Work with assembly processing in SO, meaning that a production/planned order is automatically created in the customer order during order creation.
    2) Then, after the order is created it is scheduled, and the delivery date proposal is based on that.
    3) Now you can check in the order that there are no capacity overloads, and all capacity required to produce on the proposed date is available. If yes, you're done. If not, it gets a bit complex, since you actualy need to switch to capacity planning, do capacity leveling and dispatch (PP), and the you get a new feasible schedule proposal based on that.
    APO/GATP could do all that automatically!
    Regards,
    Mario

  • I want to copy email from my mac to my pc. Forwarding one at a time via email works well, but when I try to forward several of them at a time I receive one large email. I want to receive the emails individually on my pc. Any suggestions?

    I want to copy email from my mac to my pc. Forwarding one at a time via email works well, but when I try to forward several of them at a time I receive one large email. I want to receive the emails individually on my pc. Any suggestions?

    Don't know any 'automatic' way - but, i have "Fetch Headers only" set on each of my 'secondary accounts'.
    With varying internet service, manual "Get Messages" is probably the "Best Practice" because you will know how good your service is before you even try.
    maybe set "Check for new messages every 'n' minutes" to different times
    (3 minutes, 6 minutes, etc.) on each 'secondary' account.

  • I am unable to open Safari.  It was working yesterday before I installed the update.  The update seemed to be automtic when I restarted my computer.  I am running 10.9.5.  I don't want to lose my contacts, bookmarks etc if I have to delate the app.

    I am unable to open Safari.  It was working yesterday before I installed the update.  The update seemed to be automatic when I restarted my computer.  I am running 10.9.5.  I don't want to lose my contacts, bookmarks etc if I have to delete the app.  Any suggestions?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to launch Safari. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Calculate x working days before date

    Dear experts,
    I am trying to find a date that is x working days before another.
    Is that a function module about this?
    Thank you in advance,
    Roxani

    Hi Roxani,
    You can use FM END_TIME_DETERMINE.
    There:
    - Insert in duration the number of days that you want to subtract with the minus sign (ex: -1 for previous working day)
    - Also, insert your factory calendar that you want to be the source of your working days.
    - And, of course, the desired starting date.
    Hope that helps!
    Kind regards,
    Garcia

  • ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

    iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • HT5429 I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version

    I am trying to find areas in the local community in India, however despite doing the saem, it picks up areas of foreign country. Map was working fine before i downloaded the IOS 6 version

    Quote from: lcwhitlock on 04-April-14, 13:44:09
    Hello darkhawk,
    Thank you for the recommendation.  I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one  - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
    Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
    If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
    http://www.hiren.info/pages/bootcd
    Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

  • I just bought a new macbook air and while transferring documents from my old computer to my new one it stopped working, how do I restart the transferring process (it won't force quit on the new one)?

    I just bought a new macbook air and while transferring documents from my old computer to my new one it stopped working, how do I restart the transferring process (it won't force quit on the new one)?
    I NEED HELP

    jesster03 wrote:
    i just bought a new macbook w/ mtn lion. when i transferred data from my old macbook over, it created another user name (i called it "old computer"). That's actually good
    That's actually bad. Peruse Pondini's Setup New Mac guide and seriously consider starting over.

  • My iPod touch is stuck on one song in my play list when in the shuffle mode.  How do I fix this to shuffle through all the songs in that playlist?

    My iPod touch is stuck on one song in my play list when in the shuffle mode.  How do I fix this to shuffle through all the songs in that playlist?

    If you go to the Now Playing screen, the Repeat control is the the arrowed racetrack icon on the left side right below the scrubber bar. Tap the icon to change. It is white when Repeat is off.

  • I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    I updated Firefox but now it says it will not work b/c the application may be damaged or incomplete. What can I do. It worked perfectly before I updated the app.

    Hello, terrygav. 
    I would recommend processing a reinstall of Mavericks.
    OS X Mavericks: Reinstall OS X
    http://support.apple.com/kb/PH13871
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason H.

  • TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

    An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

    For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
    If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
    Problem solved.
    And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

  • Error in consuming webservice in SE80 - SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION)

    Dear Gurus,
    Hope you all are fine. I am consuming 2 external WSDL's in ABAP (SE80 - Service Consumer). These are working fine in SAP DEV server. But when i execute tham in SAP QAS server, i am getting this error.
    (SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION))
    can anybody tell whet could be the problem?
    Thanks

    Dear Inaki,
    These proxies are working fine in DEV server. I transported them in QAS and tried to execute but getting that error. Networking team say that SAP and other servers can free communicate to each other.
    Regards

  • "ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED"

    Hi all,
    In SMICM all the services are showing active, when I tried to run the webservices the following is the error that I am getting, have looked at different solutions on sdn.
    Also please find below the dev_icm file.
    <?xml version="1.0" encoding="utf-8" ?>
    - <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
    - <asx:values>
      <SYSTEMFAULT href="#o112" />
      </asx:values>
    - <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
    - <cls:CX_AI_SYSTEM_FAULT id="o112">
    - <CX_ROOT>
      <TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
      <PREVIOUS />
      <KERNEL_ERRID />
    - <INTERNAL_SOURCE_POS>
      <PROGID>185</PROGID>
      <CONTID>978</CONTID>
      </INTERNAL_SOURCE_POS>
      </CX_ROOT>
      <CX_STATIC_CHECK />
    - <CX_AI_SYSTEM_FAULT>
      <CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
      <CODE>SOAP:1.023</CODE>
      <ERRORTEXT>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</ERRORTEXT>
      <LANGUAGE />
      </CX_AI_SYSTEM_FAULT>
      </cls:CX_AI_SYSTEM_FAULT>
      </asx:heap>
      </asx:abap>
    dev_icm:
    trc file: "dev_icm", trc level: 1, release: "640"
    sysno      00
    sid        CC5
    systemid   560 (PC with Windows NT)
    relno      6400
    patchlevel 0
    patchno    139
    intno      20020600
    make:      multithreaded, Unicode
    pid        5848
    [Thr 5852] Thu Jan 15 23:09:17 2009
    [Thr 5852] ICM running on: dlwsdv11
    [Thr 5852] MtxInit: -2 0 0
    [Thr 5852] IcmInit: listening to admin port: 65000
    [Thr 5852] DpSysAdmExtCreate: ABAP is active
    [Thr 5852] DpShMCreate: sizeof(wp_adm)##10528#(1316)
    [Thr 5852] DpShMCreate: sizeof(tm_adm)##2969176#(14772)
    [Thr 5852] DpShMCreate: sizeof(wp_ca_adm)##24000#(80)
    [Thr 5852] DpShMCreate: sizeof(appc_ca_adm)#8000#(80)
    [Thr 5852] DpShMCreate: sizeof(comm_adm)##290000#(580)
    [Thr 5852] DpShMCreate: sizeof(vmc_adm)##0#(424)
    [Thr 5852] DpShMCreate: sizeof(wall_adm)##(38456/34360/64/184)
    [Thr 5852] DpShMCreate: SHM_DP_ADM_KEY##(addr: 032C0040, size: 3381680)
    [Thr 5852] DpShMCreate: allocated sys_adm at 032C0040
    [Thr 5852] DpShMCreate: allocated wp_adm at 032C1B88
    [Thr 5852] DpShMCreate: allocated tm_adm_list at 032C44A8
    [Thr 5852] DpShMCreate: allocated tm_adm at 032C44D0
    [Thr 5852] DpShMCreate: allocated wp_ca_adm at 03599328
    [Thr 5852] DpShMCreate: allocated appc_ca_adm at 0359F0E8
    [Thr 5852] DpShMCreate: allocated comm_adm_list at 035A1028
    [Thr 5852] DpShMCreate: allocated comm_adm at 035A1040
    [Thr 5852] DpShMCreate: allocated vmc_adm_list at 035E7D10
    [Thr 5852] DpShMCreate: system runs without vmc_adm
    [Thr 5852] DpShMCreate: allocated ca_info at 035E7D38
    [Thr 5852] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 0
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 1
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 2
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 3
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 4
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 5
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 6
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 7
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 8
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 9
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 10
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 11
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 12
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 13
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 14
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 15
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 16
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 17
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 18
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 19
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 20
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 21
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 22
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 23
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 24
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 25
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 26
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 27
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 28
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 29
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 30
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 31
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 32
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 33
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 34
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 35
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 36
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 37
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 38
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 39
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 40
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 41
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 42
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 43
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 44
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 45
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 46
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 47
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 48
    [Thr 5852] IcmCreateWorkerThreads: created worker thread 49
    [Thr 4204] IcmWatchDogThread: watchdog started
    [Thr 4248] ISC: created 400 MB disk cache.
    [Thr 4248] ISC: created 50 MB memory cache.
    [Thr 4248] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
    [Thr 4248] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=1, flags=4101) for /:0
    [Thr 4248] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=2, flags=1077253) for /:0
    [Thr 4248] Started service 1080 for protocol HTTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeout
    [Thr 4248] =================================================
    [Thr 4248] = SSL Initialization  on  PC with Windows NT
    [Thr 4248] =   (640_REL,Jul 16 2006,mt,ascii,SAP_UC/size_t/void* = 16/32/32)
    [Thr 4248]   SapISSLComposeFilename(): profile param "ssl/ssl_lib" = "D:\usr\sap\CC5\SYS\exe\run\sapcrypto.dll"
               resulting Filename = "D:\usr\sap\CC5\SYS\exe\run\sapcrypto.dll"
    [Thr 4248] =   found SAPCRYPTOLIB  5.5.5C pl24  (Jun 11 2008) MT-safe
    [Thr 4248] =   current UserID: I2\SAPServiceCC5
    [Thr 4248] =   found SECUDIR environment variable
    [Thr 4248] =   using SECUDIR=D:\usr\sap\CC5\DVEBMGS00\sec
    [Thr 4248] = Success    SapCryptoLib SSL ready!
    [Thr 4248] =================================================
    [Thr 4248] Started service 8443 for protocol HTTPS on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeou
    [Thr 4248] Started service 1025 for protocol SMTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeout
    [Thr 2464] MPI<4>1#3 Peak buffer usage: 1 (@ 64 KB)
    [Thr 2112] MPI<5>2#3 Peak buffer usage: 2 (@ 64 KB)
    [Thr 4248] Thu Jan 15 23:09:26 2009
    [Thr 4248] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 9 seconds [icxxtool.c   1065]
    [Thr 4248] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c
    [Thr 200] Thu Jan 15 23:09:36 2009
    [Thr 200] MPI<7>4#3 Peak buffer usage: 3 (@ 64 KB)
    [Thr 4092] MPI<9>6#3 Peak buffer usage: 4 (@ 64 KB)
    [Thr 1660] Thu Jan 15 23:09:40 2009
    [Thr 1660] MPI<b>8#3 Peak buffer usage: 6 (@ 64 KB)
    [Thr 3168] Fri Jan 16 00:02:52 2009
    [Thr 3168] *** WARNING => Connection request from (8/24/1) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)
    RM-T8, U24, 600 AVISHNU, GX280I576YB1S, 00:02:47, M1, W1, SEU_, 3/2 [icxxconn.c 2121]
    [Thr 3684] Fri Jan 16 00:04:40 2009
    [Thr 3684] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 3804] Fri Jan 16 00:04:56 2009
    [Thr 3804] Deactivated service 8443 for protocol HTTPS on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 2664] Fri Jan 16 00:09:26 2009
    [Thr 2664] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c   2007]
    [Thr 3516] Fri Jan 16 00:23:53 2009
    [Thr 3516] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c   2007]
    [Thr 4116] Fri Jan 16 00:26:53 2009
    [Thr 4116] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c   2007]
    [Thr 4112] Fri Jan 16 00:27:07 2009
    [Thr 4112] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c   2007]
    [Thr 1684] Fri Jan 16 00:34:23 2009
    [Thr 1684] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c   2007]
    [Thr 3516] Fri Jan 16 00:46:52 2009
    [Thr 3516] Reactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 3516] Reactivated service 8443 for protocol HTTPS on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 3468] Fri Jan 16 01:29:23 2009
    [Thr 3468] *** WARNING => Connection request from (9/25/0) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)
    RM-T9, U25, 600 SRAJEEV, GX_XP2BASE:0, 01:29:18, M0, W0, SEU_, 2/2 [icxxconn.c 2121]
    [Thr 1660] Fri Jan 16 02:00:47 2009
    [Thr 1660] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 196] Fri Jan 16 02:00:57 2009
    [Thr 196] Reactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 2292] Fri Jan 16 02:13:41 2009
    [Thr 2292] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 4108] Fri Jan 16 02:14:05 2009
    [Thr 4108] IcmChangeService: change service 1080 for HTTP to 8080
    [Thr 4108] Reactivated service 8080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
    [Thr 4208] Fri Jan 16 02:15:24 2009
    [Thr 4208] *** WARNING => Connection request from (8/24/3) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)
    Regards,
    vishnu
    Edited by: vishnuarigela on Jan 16, 2009 10:05 AM
    Edited by: vishnuarigela on Jan 16, 2009 10:20 AM

    Hi Olivier,
    I know its been more than an year since the last time I have posted on this thread.
    The problem still persists, I have made the necessary changes as you have suggested,
    made the necessary changes to the logical port number.
    The error has changed to no extended error message (SOAP_ESERVER).
    In sm21:
    SOAP Runtime: SOAP Runtime exception: 112 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
    SOAP Runtime: Exception message: no extended error message (SOAP_ESERVER)
    dev_rfc:
    ERROR 01:01:48: SOAP Application CL_SOAP_APPLICATION_CLIENT     
    IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING() A SOAP Runtime Core 
    Exception occurred in method XP_READ_TAG of class CL_SOAP_XP at 
    position id 1 with internal error id 112 and error text no      
    extended error message (SOAP_ESERVER) (fault location is 1 ). 
    Any suggestions would be greatly appreciated. I have looked up on sdn, however was
    unable to find a solution.
    I have opened another thread under Netweaver Administrator with the subject SOAP Exception,
    I apologize if it was a mistake.
    Regards,
    Vishnu.
    Edited by: vishnuarigela on Feb 11, 2010 9:36 AM
    Edited by: vishnuarigela on Feb 11, 2010 9:37 AM
    Edited by: vishnuarigela on Feb 11, 2010 9:38 AM
    Edited by: vishnuarigela on Feb 11, 2010 11:46 AM

  • When receiving the Iphone 4...

    When receiving the Iphone 4, once i activate it, could i call AT&T to place the data plus or data pro plan on to my account?
    Since i want to have the phone shipped directly to my house, rather than picking it up in-store, would this be possible?
    I have a regular phone with no data plan on it right now, so i know i need to have one in order to have an iphone.
    you response would be greatly appreciated!

    I was at AT&T last week asking various questions & one was regarding home delivery. I was told that when you receive your phone you will be given a number to call to accept your contract and you would be ready to sync with your computer. I would imagine you could add all your features then.

  • SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")

    Hello all,
    can you pls suggest me smth for this:
    I am running solman_setup and at phase 5.1 (Configure Web dispatcher) and I have errors:
    SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")
    L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC)
    L2 - Failed to reach test WS through ICM
    I choosed: No SAP Web Dispatcher used
    What I did:
    1. re-created users SM_EXTERN_WS and SM_INTERN_WS
    2. added table HTTPURLLOC with the full hostname and the port
    3. created SSL server standard certificate in STRUST and its green
    4. instance profile>>add login/accept_sso2_ticket=1 and login/create_sso2_ticket=2
    Thx for any suggestion
    Chris

    Hello,
    I read note 1094342 - ICM trace contains verification of the server's certificate
    and I installed in the IE browser the PSE saved from /strust
    Thx for any idea
    [Thr 140736729089792] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL[Thr 140736729089792]    session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLA.pse"[Thr 140736729089792] SecudeSSL_SessionStart: SSL_connect() failed[Thr 140736729089792]   secude_error 536872221 (0x2000051d) = "SSLAPI error"[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 FALSE[Thr 140736729089792] >> Begin of Secude-SSL Errorstack >>[Thr 140736729089792] 0x2000051dSAPCRYPTOLIB SSL_connect[Thr 140736729089792] SSL API error[Thr 140736729089792] Failed to verify peer certificate. Peer not trusted.
    ][Thr 140736729089792] << End of Secude-SSL Errorstack[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 TRUE[Thr 140736729089792]   SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"[Thr 140736731203328]   SSL_get_state() returned 0x00001180 "SSLv3 read client certificate A"[Thr 140736731203328] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL[Thr 140736731203328]    session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLS.pse"[Thr 140736731203328] SecudeSSL_SessionStart: SSL_accept() failed[Thr 140736731203328]   secude_error 536875078 (0x20001046) = "SSL API error"[Thr 140736729089792] No certificate request received from Server[Thr 140736731203328] >> Begin of Secude-SSL Errorstack >>[Thr 140736731203328] 0x20001046SAPCRYPTOLIB SSL_accept[Thr 140736731203328] SSL API error[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl23_accept[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl3_read_bytes[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] << End of Secude-SSL Errorstack[Thr 140736731203328] <<- ERROR: SapSSLSessionStart(sssl_hdl=1315bf0)==SSSLERR_SSL_ACCEPT[Thr 140736731203328] <<- SapSSLErrorName()==SSSLERR_SSL_ACCEPT[Thr 140736729089792] <<- ERROR: SapSSLSessionStart(sssl_hdl=7fffcc023860)==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736729089792] <<- SapSSLErrorName()==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736731203328] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn_mt. 1713][Thr 140736729089792] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-102): SSSLERR_PEER_CERT_UNTRUSTED {000f3a6b} [icxxconn_mt.c 1989][Thr 140736731203328] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736731203328]      in: sssl_hdl   = 1315bf0[Thr 140736731203328]          ... ni_hdl = 92[Thr 140736731203328] NiICloseHandle: shutdown and close hdl 92/sock 41[Thr 140736729089792] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736729089792]      in: sssl_hdl   = 7fffcc023860[Thr 140736729089792]          ... ni_hdl = 223[Thr 140736729089792] IcmConnConnect(id=15/14955): free MPI request blocks[Thr 140736729089792] MPI<5909c>85#7 GetInbuf -1 21d220 1757 (1) -> MPI_EOS: End Of Stream

Maybe you are looking for

  • G4 vs New MAC BOOK PRO

    I have G4 tower but Im thinking of buying one of the new Mac Book Pros they just came out with. I have heard how the towers are better then the Mac Book Pros for logic. But I was wondering if the Mac Book Pros are bigger and faster then my G4 wouldnt

  • Installing Tuxedo 8 on Redhat 7

    When installing Tuxedo 8 on Redhat 7 the installer hangs and no screens appear. The solution to this problem is to set the following environment variable and retry the installation. bash shell:      export LD_ASSUME_KERNEL=2.2.5 I recently ran into t

  • Validation in Personal Data application of standard ESS

    Hi expert, I want put some validation on standard ESS personal data application.I have imported the DC and create project with the it. But now I am unable to understand how to implement the validation. I want to put validation on First Name & Last Na

  • Alternative to HttpURLConnecton

    Hi I have been using HttpURLConnection to process calls to a set of RESTful web services, however I find that it's behaviour in the face of various different HTTP status codes is inconsistent. For example, if presented with a 404 error, a FileNotFoun

  • Getting complete file path in Acro Java Script

    Hi All, I have a requirement where I have a field ZPATH1 on Adobe Interactive Form. I am putting a BROWSE button and writing following JavaScript on CLICK event on this button for populating the chosen file path into field ZPATH1. *Start of JavaScrip