Cancelling call diverts on Nokia 6630.

At present my phone only rings for about 15 seconds before going to my voicemail. I have tried to cancel the divert but my phone will not allow me to cancel when not answered nor will it allow me to increase the time before diverting.
Is there any other way around this or should i contact my network?
Cheers

A few useful codes :
Call Divert (all call types)
All
Set: **21*destination#[SEND]
Cancel: ##21#[SEND]
Query: *#21#[SEND]
No Answer
Delay nn seconds: max is generally 30 seconds
Set: **61*destination*nn#[SEND]
Cancel: ##61#[SEND]
Query: *#61#[SEND]
Unreachable
Set: **62*destination#[SEND]
Cancel: #62#[SEND]
Query: *#62#[SEND]
Busy
Set: **67*destination#[SEND]
Cancel: ##67#[SEND]
Query: *#67#[SEND]
Cancel All
##002#[SEND]
Divert Voice Calls
All
Set: **21*destination*11#[SEND]
Cancel: ##21*11#[SEND]
Query: *#21*11#[SEND]
No Answer
Delay nn seconds: max is generally 30 seconds
Set: **61*destination*11*nn#[SEND]
Cancel: ##61*11#[SEND]
Query: *#61*11#[SEND]
Unreachable
Set: **62*destination*11#[SEND]
Cancel: ##62*11#[SEND]
Query: *#62*11#[SEND]
Busy
Set: **67*destination*11#[SEND]
Cancel: ##67*11#[SEND]
Query: *#67*11#[SEND]
Divert Data Calls
All
Set: **21*destination*25#[SEND]
Cancel: ##21*25 [SEND]
Query: *#21*25#[SEND]
No Answer
Delay nn seconds: max is generally 30 seconds
Set: **61*destination*25*nn#[SEND]
Cancel: ##61*25#[SEND]
Query: *#61*25#[SEND]
Unreachable
Set: **62*destination*25#[SEND]
Cancel: ##62*25#[SEND]
Query: *#62*25#[SEND]
Busy
Set: **67*destination*25#[SEND]
Cancel: ##67*25#[SEND]
Query: *#67*25#[SEND]
Divert Fax Calls
All
Set: **21*destination*13#[SEND]
Cancel: ##21*13#[SEND]
Query: *#21*13#[SEND]
No Answer
Delay nn seconds: max is generally 30 seconds
Set: **61*destination*13*nn#[SEND]
Cancel: #61*13#[SEND]
Query: *#61*13#[SEND]
Unreachable
Set: **62*destination*13#[SEND]
Cancel: #62*13#[SEND]
Query: *#62*13#[SEND]
Busy
Set: **67*destination*13#[SEND]
Cancel: ##67*13#[SEND]
Query: *#67*13#[SEND]
Divert Line 2 Calls
All
Set: **21*destination*89#[SEND]
Cancel: #21*89#[SEND]
Query: *#21*89#[SEND]
No Answer
Delay nn seconds: max is generally 30 seconds
Set: **61*destination*89*nn#[SEND]
Cancel: ##61*89#[SEND]
Query: *#61*89#[SEND]
Unreachable
Set: **62*destination*89#[SEND]
Cancel: ##62*89#[SEND]
Query: *#62*89#[SEND]
Busy
Set: **67*destination*89#[SEND]
Cancel: ##67*89#[SEND]
Query: *#67*89#[SEND]

Similar Messages

  • Cancelling call divert

    Each time I try to cancel call divert by dialling #21# I get a message saying 'sorry, the service requested is not available' !!!  Any ideas what I do now as I am desperate to cancel call divert.  Thanks for any help

    that is the correct way to take a divert off... if you put on the divert this should work, however if it was put on by 151 you may have to give them a call... also if you are using a feature line have you tried # 121 #

  • Nokia 6300 Call Divert menu

    I have a 6300 ex T-Mobile which has been unlocked and is now on O2. I find that the menu option to "Divert all voice call to voice mailbox" gives an error "Request No Completed".
    The standard *#... code to divert works fine but I'd like to get the menu option working too. Is this because the phone still has T-Mobile details. is there a way to edit this and get it working on O2?
    Thanks

    This could v well b an operator issue. In India a network BSNL allows call diverts to only its own network numbers. So if that's the case in ur area pls do check with the operator too.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Nokia 2310 phone call divert screen symbol

    dear sir/madam,since i have been abroad in italy a few weeks ago i now have the bent arrow symbol'call divert'on my screen and in this phone's call settings menu there is no way of cancelling or deleting this icon or symbol from the screen or LCD panel.
    anybody have any clues on how to fix this.
    regards danny.

    Wow! I've just got back from Spain and was wondering the same thing. I was picking up my voicemail and then as soon as I hung up that icon appeared. I've received calls and texts on my phone since then, and as far as I can tell the calls AREN'T being "diverted" in any way!
    However, when I go to "call settings" to try and turn on/off diverts, I only have menu options 2, 4 and 6 - nothing to do with diverts and nothing which allows me to get rid of this symbol.
    I'm also with orange!
    Anyone have any information? This is driving me crazy!
    (just a thought - has anyone tried to use "restore factory settings" on this problem? It seems a little drastic, but it may help)

  • Nokia 5200 call divert

    Going to Aus and want to block incoming calls.
    User guide most unhelpful.
    I tried settings > call > call divert > divert all voice calls > activate > to voice mailbox and got "requesting" then "request not complete"
    I tried settings > security > call barring service > incoming calls when abroad > activate > barring password > [4 digit code] and got "requesting" > "barring password blocked".
    Any ideas?

    depending on your location on the globe,I would suggest you contact your service provider for more information coz barring services are supported by network pprovuders

  • 6300 call divert missing from menu

    Some time ago I set up Call Divert on my Nokia 6300 (on Orange UK), but now that I wish to cancel it, I go to menu>setiings>call, but Call Divert no longer appears. The items there are listed as 2/8 to 8/8. How do I get it back?

    This could v well b an operator issue. In India a network BSNL allows call diverts to only its own network numbers. So if that's the case in ur area pls do check with the operator too.
    Please mark the post as solution if it solves your problem.
    Current Device - Nokia Lumia 1020/920

  • Call Divert E61

    Hello all,
    When I restart my E61 it defaults to Divert All Calls and I have to then cancel this through the settings menu.
    Does any one else have this problem?
    Thanks

    OK - I had call divert problems - my Nokia e61 doesnt have the option to switch it off !!! (although the manual says that it does) a Call Divert option listed in the tools>setting> menu. No means to toggle on or off. The annoying thing is that the thing keeps going to divert all calls when I call my voicemail - which is ok when I am using the thing - but then when I finish the call to voicemail, the divert icon wont go away.
    What can I do if the darn thing doesnt give me the option to remove call divert?
    Thanks!

  • Flash lite 2.1 installation problem with Nokia 6630

    Hi,
    I have Nokia 6630. I downloaded flash lite
    2.1(flashlite2_1_symbian_s60V2_FP3.sis) from adobe and when I tried
    to install the .sis file, I got the following error message "Model
    of phone not supported. Installation cancelled". But in the
    applications folder I see a program called Flash Player, whose
    status is 'installed'. Moreover, I couldn't see any flash icon in
    the menu.. So I am confused..what should I do, to install flash
    lite 2.1 succesfully and view swf files on my phone(NOKIA 6630)?
    Thanks & Regards,
    Sridhar B

    Hi there,
    I am having the same issue here, but i have downloaded the
    FP3 version and i am still getting this error.
    it says "Your model of phone is not supported. installation
    canceled" and the thing is, i have a Nokia 6630. I mean, it should
    work it even says:
    This installer will only work for the following Nokia S60
    handsets: 6630, 6680, 6681, and 6682
    I hope you guys can help me

  • Connection problems PC Suite - Nokia 6630

    Hi,
    I cannot get connected via Bluethooth to my Nokia 6630.
    My configuration is:
    Nokia 6630
    Widows XP Home Edition Version 5.1 (Build 2600.xpsp_sp2_gdr.050301-1519 : Serivice Pack 2)
    PC Suite 6.80.22
    Bluethooth USB Adaptor Belkin F87001 ver.2.11
    When I check on Nokia PC Suite Help 'about Nokia PC Suite' System info it says:
    Microsoft Windos 2000
    Build 2195
    No service pack installed
    and it also says:
    No supported Bluetooth stack found
    I have no problems using the Bluetooth USB adaptor for other applications.
    The problem with Nokia PC Suite is:
    After installing PC suite, I click on 'get connected' button and get the message:
    'there is no available connection type and therefore the connection to phone cannot be established. The wizard will exit.' If I then press OK I get the message: 'failed to detect available connection. Please reinstall Nokia PC Suite.'
    I have tried to reinstall PC Suite several times but always end up with the same messages.
    I have also run the PC Suite Cleaner 3.3 but still have the same messages.
    What should I do?
    Thanks,
    Andreas

    Hey,
    Dont worry, this is an issue alot of people have. I wrote a quick tutorial on how to do this.
    I understand that you have Service Pack 2 on your Windows XP am I Correct?
    If I am then procede with the tutorial:
    Connecting the Phone to a USB Bluetooth Dongle. Using PC Suite.
    Yesterday, I stayed up all night to figure this out. I called nokia support to see what they can do, and apparently the new drivers from Sitecom (the BT adaptor that I use) creates a "Cloak" over the Microsoft ones. (This is only if you have SP2!!)
    Required for these steps:
    ~PC Running Windows XP on Service Pack 2. (how do I know if I have Service pack 1/2? Go to Start > Controll Panel > Classic View (on the top left corner, or if you already are then ignore this) > System. In system it will say which serivce pack you are running.
    ~PC Suite version 6.80.22 or later.
    ~Bluetooth Adaptor + Drivers for it
    ~Nokia Phone supporting a bluetooth In/Out connection.
    ~Patience (this may take half an hour depending on your PC Spec) (Took me 15 minutes)
    So here is what I did:
    First of all close all programs that you dont need running.
    Start > Controll Panel > Add Remove Programs > Sitecom drivers
    Remove ALL Sitecom (or which ever company's you use).
    Reboot Computer.
    Next put the CD/Floopy in the PC or folder that you downloaded have ready on your desktop, containing the drivers required for your adaptor.
    If a autorun comes up cancel it.
    Plug in your bluetooth adaptor to a permanent usb port! The port you plug it into will be the only and only port that you can run bluetooth from, dont ask me why. So use a good safe place. (I put mine in the back of my PC, not the front.)
    Windows will now say that it has found new hardware. It will ask you if it can search the internet for drivers, click > Yes This Time Only.
    It will search and wont find anything.
    Now it will ask you if it can search for drivers on the PC, click : Yes, and tell it where the drivers are located, CD/Floppy, Folder. eg: E:\Sitecom/drivers/XP
    Let it install. It will finish, then suddenly re-open.
    Run the same step as above again. (dont ask me why..it just installes some more drivers.)
    Finally it will finish and say that your software is ready to be used.
    DONT TRY TO USE IT! THE SOFTWARE REQUIRED ISNT RUNNING YET. DONT RUN PC SUITE EITHER! DONT QUIT PC SUITE, AND DONT TRY TO USE THE CONNECTION MANAGER.
    REBOT the PC.
    Now when you go into PC Suite > Connection Manager, you should find a new connection. In my case:
    Bluetooth (Sitecom)
    and the old bluetooth connection looks like this:
    Bluetooth (Microsoft)
    The connection is very fast and stable. You can browse the phone as if it is cable connected which is awsome. Transfer speed depends on your adaptor, but it averages between 1 - 3 Megabites Per Second.
    Hopefully this works for you too!
    Good Luck,
    Tal
    I own a 5210, 5140 and now..the new 3250. Symbian 60 Series OS 3.0 ..just the best.

  • Nokia 6630 Sensor 2.33

    Hello ! I downloaded Nokia Sensor 2.33 from Nokia official website and when I wanted to install it in my Nokia 6630 using Nokia Application Installer, a security error appeared on the screen and cancelled the install process. Than I turned off the signature check for applications and it made the same security error. What can I do ?

    Hi!
    Unfortunately, you will never see contacts or call lists with this configuration when you are connected via Bluetooth.
    At that time, the market for Bluetooth devices was not that big as it is today and most of the Bluetooth profiles used at that time didn't support Phonebook downloads.
    So you can only see your contacts & call lists if you would use a phone in cradle.
    But at least, you have another option you can use with your Denso:
    You can store up to 20 names inside the handsfree unit.
    Just say "Phone-Store Name", wait, then the name, wait, then the number, confirm and it is stored and you can dial it by saying "Phone-Dial Name", wait, the name.
    You can also consult this document: http://fordfcsd.wunderman.be/
    Choose your language, click "Audio-Mulitmedia-Nav", then "Bluetooth and Voice Control" and you got it.
    BRMessage Edited by hotline on 25-Jun-200704:50 PM
    Message Edited by hotline on 25-Jun-200704:51 PM

  • Problems with the "comm" protocol on Nokia 6630

    Hello,
    I am trying to write a simple MIDlet for my Nokia 6630 phone using the "comm" protocol. The problem is that System.getProperty( "microedition.commports" ) returns "null" and when I call Connector.open( "comm:0;baudrate=9000" ); I get javax.microedition.io.ConnectionNotFoundException: java.lang.ClassNotFoundException: com/symbian/midp/io/protocol/comm/ Protocol. My MIDlet works fine in the emulator and it returns the available com ports.
    So my question is does the Nokia 6630 phone supports the "comm" protocol?
    P.S. I am using the Sun Java Wireless Toolkit 2.3 beta

    I don't believe I can solve your problem, but I'll warn you that calling native code from an EJB (which is what you are doing when you call into the serial api), is directly dis-allowed by the EJB spec.
    God bless,
    -Toby Reyelts

  • Automatic call divert

    I used to have an Erricsson (can't remember which) but it had a nice feature where whenever it was plugged in to charge (or docked) it automatically diverted all voice calls (eg to my desk phone)
    Is there any way to do this with any of the Nokia phones? I currently have a 7210 but will upgrade soon (like the look of the n series).
    thanks
    Andrew

    I have a series 60 phone, but I think it's the same. Click on settings, call divert...

  • 6151 call divert

    Hi, I have a 6151 and the call divert activates too quickly. How do I change how long the phone rings for before it diverts to voicemail?
    Solved!
    Go to Solution.

    This is a network setting. You have four possibilities:
    1. You can't...your operator is keen on voicemail revenue
    2. There may be a setting in your phone under "call divert"
    3. You may be able to change it on your operator's website
    4. Otherwise, try calling your operator
    Chris
    6230i (the last bug-free Nokia?)
    Vodafone UK contract since 1992

  • 6310 : Call Divert - 'Request not Completed'

    I have a Nokia 6310 and wish to set up a call divert.
    I follow the instructions in the manual, setting the delay, etc, but when I get to select Activate I am given a error message of 'Request not Completed'.
    What is causing this?

    If you're on a Pay & Go sim, some networks only allow you to divert to Voicemail - and it won't allow diverts to other mobiles/landlines.
    Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
    Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

  • Call divert ;last call duration..

    How to check call divert setting and last call duration on nokia Lumia 920...

    Call divert HERE
    And the app is for duration and yes you need an app.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • Creating a document with different page sizes.

    I'm trying to produce a leaflet with different pages sizes. To try and explain what I mean I have included a picture of what I'd like the front cover to look like. When producing a booklet there doesn't seem to be a provision to individually alter ea

  • HP Color LaserJet 1600 Printer

    I really love my HP Color LaserJet 1600 printer but haven't been able to successfully install it in my brand new MacBook Air 1.7 despite several attempts. I have downloaded the correct Firmware Upgrade 20120928 v2.4 from HP Drivers web page. Unlocked

  • I need assistance setting up a classroom network

    I have an Apple Lab in my room, have been using a cobbled together network and now need to establish a solid network protocol and get my lab working fully. Computers in use:      iMac's (17, various generations)      Powerbooks (4)      Macbook (1)  

  • Configure ZENworks Database fails in C1

    Afternoon everyone Background: Root ZEN Inventory server was using JDBC connection to a SQL 2000 DB for storing inventory but the SQL server was being decommissioned. The primary reason for moving it to SQL was to run Crystal queries on the data, but

  • Alphabetical list of names

    I have been able to make a name list and sort it alphabetical, but with 150 names it stretches over numerous pages.  How do I create a name list all on one page with multiple columns?