Cancelling/Deleting messages in the adapter engine

Hi Everyone:
How can I cancel or delete a message in status 'system error' in my adapter engine.
I do not want this message will be resent by mistake when the receiver comm chanel will be active.
Thanks a lot guys.

Alvaro,
If the message is successfully processed then you cannot delete. If your message is in waiting or etc. then go through this weblog for much information:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Hope this helps you...
---Satish

Similar Messages

XI Adapter ? No messages in the adapter engine in RWB

Hi Guys,
I have the scenario SOAP-PROXY. I have configured XI Adapter on the receiver side. I have used xml spy to post the messages directly to the IS. I could not see any messages in the adapter engine in RWB.
I have seen the messages processed successfully in the integration engine under RWB.
can anybody explain why i could not see any messages in the adapter engine ? Is It normal with the xi adapter on the receiver side ?
Thanks,
Raj
Message was edited by:
raj reddy

Raghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos.

Auto Cancellation of Messages in the Integration Engine.

Dear all,
Issue: Auto Cancellation of Messages in the Integration Engine.
Description: Actually Today, I'm facing Problem in message mapping and its showing error "JCO_SYSTEM_FAILURE". Finally the message is Auto Canceled and showing the status in the Message Monitoring as Canceled with Errors.
I have doubt here how the messages are Auto Canceled with Error? Is there any system or ABAP program which cancelling these messages?
Waiting for yours valuable reply on the above issueu2026
Edited by: BhavinPatel on Oct 7, 2010 8:15 AM

Hi Bhavin,
Two report program are there to cancel error msgs automatically..
1) RSQIWKEX
2) RSXMB_CANCEL_MESSAGES
Regds,
Pinangshuk.

Delay of Message in the Adapter Engine when put into queue

Hi XI/PI Experts,
We are having problems in the Adapter Engine wherein messages are staying longer in the AE queue as usual. Sometimes, it stays longer in Delivering status also. Is there any way we can monitor and try to push the message out of AE to avoid delays? I know we can do this in the ABAP side (Integration Engine)...but how can we do this in the Adapter Engine?
See below sample logs in AE RWB:
2008-07-17 13:28:13 Success Using connection SOAP*****. Trying to put the message into the receive queue.
2008-07-17 13:28:13 Success Message successfully put into the queue.
2008-07-17 13:34:12 Success The message was successfully retrieved from the receive queue.
2008-07-17 13:34:12 Success The message status set to DLNG.
As you can see there is a gap of 4 minutes.
Hope you can help me. Thank you so much in advance.
Grace

Hi.
Thanks for your answers but the messages are not set into EOIO but just EO. So the messages are not ending up in Holding Status.
I also believe that issue is not occurring because of too many messages in error in AE nor because of the receiving system is down. Issue is happening when message is about to be sent to the SOAP communication channel in AE. As you can see in the sample log I provided above, in RWB AE, after the message was put into queue, it took several minutes to be delivered to corresponding comm channel. My questions are:
1. Is there a way we can monitor the queue in AE like the way we monitor the queue in IE? (e.g. smq1 and smq2 transactions) .
2. If there is a way, how are we going to intervene manually on the queues in AE? (we can intervene with smq1 and smq2 in IE)
3. For messages with Delivering Status in AE, sometimes it is taking hours to move to "Successful/Delivered" Status. Is there a way we can intervene with that? I believe we can resend messages with "System Error" Status and Staus "To be Delivered" but for status "Delivering"...it is not possible (from what I know -- I hope there is a way).
I look forward to hearing from you guys/gals.
Grace

How to process stucked holding messages in the Adapter Engine.

Hi experts,
This question is may be familier to all...
There are thousands of messages are in holding status in the Adapter engine in RWB.
I tried to found system error in these messages. There is no system error from the last in my investigation. I tried to restart of the communication channels of the combination of these messages. But it is also not use to fix this problem.
Instead of the restart of the Java engine please let me know is there any possibility to fix this issue.
Regards
Mahesh

Hello Mahesh
You can try restarting some of the XI services (e.g. com.sap.aii.af.svc) but usually a java restart is required to free up these blocked threads/queues.
Most likely these messages are in Holding status because there is a blockage in one of the Adapter queues. This can be monitored in the RWB
-> Component Monitoring
-> Adatper Engine XIP
-> Engine Status
-> Additional Data
Find out what adapter queues are causing the blockage and increase the number of threads/queues available to it. This will help prevent the issue occuring again.
See note #791655 Documentation of the XI Messaging System Service Properties, for an explaination of the queues.
See these blogs for more details:
1) /people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
2) /people/kenny.scott/blog/2008/12/05/xipi-file-and-jdbc-receiver-adapter-performance-and-availability-improvements
Ensure note #937159 XI Adapter Engine is stuck, has been applied.
Regards
Mark

Message Archiving for the Adapter Engine

Hi,
we have configured archiving for Integration Engine (SXMB_MONI) messages on the Production XI System. is it necessary to configure Message Archiving for the Adapter Engine also ? in which scenarios archived adapter messages are useful ? are there any other advantages/disadvantages for this(in case of errored messages on the adapter engine) ? Please share any ideas.
Thanks
Pavan.

>>is it necessary to configure Message Archiving for the Adapter Engine also
Not necessary,but depends upon the scenario,lets say you are posting messages to external partner's FTP and there was some issue in connectivity due to which file was not delivered,in this case you need to send the message again.
same thing can happen in inbound messages too.
>>in which scenarios archived adapter messages are useful ?
i would do this specifically for JDBC sender coz once you pick up the files based upon SQL query,you change the flag so that those values are not picked next time,in this case you can't re-run the old query and get same results.
this also holds for proxies and file too.
Thanx
Aamir

How to remove large message stuck in the adapter engine?

Hi experts,
We have a large message abt 100 MB stuck in the adapter engine which is causing the J2EE server to restart continuously.
I have tried increasing the heap sizes and the number of threads in config tool, but no luck. My question here is how to remove that message? Also I checked smq1 and smq2 both are empty.
Regards.

Hi Nagasatya,
This issue is realted to Large amount of data.You have to write condition in the query.I have face same issue,but resolved it.Please do the following steps.
Go to Configtool and selct the com.sap.aii.adapter.jdbc.svc and set this jdbc service to start manually instead of auto.
Then restart server0, this time it should be started successfully. Then go to rwb and try to
find if any jdbc hanging/failed messages are there, if so, cancel them;also deactivate the problematic jdbc communication channel, otherwise itwill poll the data again. After all above, you can manually try to start this jdbc.svc particually.
Thanks
Ravi

Getting error in the adapter engine when sending a message

Hi,
I'm always getting this error in the adapter engine: Message processing failed. Cause: com.sap.aii.messaging.util.URI$MalformedURIException: no scheme
The comm channel ends up in error because of messages having the above error.
Could someone please help?
Thanks.
Mike

Mike.
Please check this links.
Check your adapter and restarted.
com.sap.aii.messaging.util.URI$MalformedURIException: invalid port number
Re: Prerequisites to setup configure mail scenario.
error in communication channel
Error :Receiver File Channel not Initialized

Messages are in hold in the Adapter Engine

Hi all,
I am seeing in my adapter engine that all of the messages are in status hold , it is for a specific business system and interface.
2009-02-10 21:41:30 Success Message successfully put into the queue.
2009-02-10 21:41:31 Success The message was successfully retrieved from the receive queue.
2009-02-10 21:41:31 Success The message status set to HOLD.
can anyone please help?
Thanks in advance
Sugata B

Hi
i ve got the same problem .
I m using the message monitor in order to find the first message in error in this queue and so to be able to free the queue.
My problem is how to detect these holding messages.
As the error is in the Adapter Engine , you cant see it in sxmb_moni transaction
In the message monitoring, you can check it manually.
I need to have an automatic report of 'holding messages".
I try to connect the Adapter engine alert to the ccms. The problem is that autoreaction alert arent possible in this case.
Any body found the means to check directly in the database with sql-based command the status of message ?
thanks for your help
florent

Message split on adapter engine for the java based IDoc adapter

Hi Guys,
Do you know if message split on adapter engine is available for the java based IDoc adapter on the single stack (PI 7.31)?
I'm getting such exception when I try to post 3 IDocs
Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.idoc.exception.IDOCAdapterException: Error before sending due to idoc parsing error: (7) IDOC_ERROR_PARSE_FAILURE: Invalid XML 1.0 character encountered within IDocXML for type <ns0:Messages>:
state=EXPECTING_IMMEDIATE_TAG_END, charPosition=68, lineNumber=1, columnNumber=69, invalidChar=U+0078,
sourceSnippet=...UTF-8" standalone="no"?><ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge"><ns0:Message1><...
^
Mapping is one to many.
Each IDoc content has been compared manually against the xsd schema and it was fine.
I know that old way of modifying xsd is still possible.
Best regards,
Wojciech

Did you find a solution to this? Having a similar error right now.
Thanks and kind regards
Jens

Message struck in adapter engine with status Hold

Hi,
In intergaration engine all messages are processed, I have checked SMQ1, SMQ2 (no message is struck in queue)
where as messages struck in adapter engine with status Hold, I have checked this in RWB. How to resolve this?
Regards,
Krishna

Hello,
Below is some information on how to resolve this type of issue:
1 - In the RWB, expand the tray for "Configure Table Columns" - by clicking on a square at the right end of this heading.
2 - Check the checkboxes for "Serialization Context" and "Sequence Number". These should then appear in the table columns as well.
3 - Add the Serialization Context to the Extended Filter Criteria. Search the messages in status HOLD based on this new additional criteria.
4 - Sort the messages in ascending order based on the Sequence no.
5 - Check the predecessor message of the first message in status "HOLD"
Based on the following status for this predecessor messages, the actions that can be taken for the HOLD messages are:
a - Predecessor is in Failed State/System Error : Cancel/Resend the
first message in status HOLD after this. Then the remaining messages
can be cancelled/resent.
b - Predecessor is in DLVD state(delivered state) : First Holding
message can be resent/cancelled followed by the others.
c - Predecessor is in NDLV(Non-Delivered Status) : Check why the
predecessor message failed and correct the reason for the failure.
Then resend the predecessor message and then cancel/resend the
remaining HOLD messages. Alternatively, you can directly try
resending this NDLV predecessor message and see if it goes. If it
goes, then the remaining HOLD messages can be resent/cancelled.
Another option could be to cancel this NDLV predecessor message so
that it goes to FAILED state and then cancel/resend remaining HOLD
messages.
Regards,
Sarah

Post Installation steps for Messages archiving from Adapter engine

Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar Bolisetty

Hi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime

XI message status at Adapter engine level using a table (SAP table)

Hello Experts,
XI message status at Adapter engine level using a table (SAP table).
We want to write a custom report using ABAP so Pls tell why the status u2018Holdingu2019 and u2018To be deliveredu2019 are present in message monitoring of RWB but not in the status (MSGSTATE) field of SXMSPMAST table.
My need is to write a report to get the messages based on the these status from table level.
Please let me know the table name and field name for this and the table name for the desciption of the status of XI messages at Adapter level.
Thanks
Gopesh

Hi Gopesh,
the Adapter Engine Messaging System messages are on the Java schema,
i.e., see the following -
[XI/PI tables|https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/xi+tables]
Regards
Kenny

How to get Payload of SOAP Message in Advance Adapter Engine

HI All,
I am wondering if anybody can tell me how to view the Payload of SOAP Sender and Receiver Message in Advance Adapter Engine?
Does Anybody know how to check mapping payload in Advance Adapter Engine because in ABAP you can see the mapping payload under Request Message Mapping but when you use AAE you can't see the Request Message Mapping Payload.
I have a SOAP to RFC Scenario in which I can't see the SOAP Sender and RFC Receiver Mapping Payload.
When I am sending incorrect data to an RFC I am getting this error which is very strange and new to me.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: Unable to split a synchronous message
Any comments would be much appreciated.
Thanks,
Iqbal

HI All,
I have managed to find Michal's Blog which is talking about getting the mapping payload but unfortunately I don't know how to create Adapter Module so I am wondering if somebody can please provide me EAR file so that I will request the Basis guys to deploy the code and hopefully this will solve my query.
Michal's Blog
As you all probably know while using local Advanced Adapter Engine (AAE) processing in SAP PI 7.1 the message is logged only once (during processing by sender adapter). This is great in terms of performance but what if we need to check the mapping output? Is there a way do do it somehow? It turns out that we don't have such an option in standard yet. Is there any alternative then?
It turns out there is - a simplest adapter module there is...
Local AAE works in such a way that from the sender adapter it executes the receiver adapter so in the outbound message to PI processing you can see the adapter info logs of the receiver adapter and this is what we can use. The idea is to add an adapter module to the receiver adapter which will put the content of the message into the audit log of PI message processing. We can do it by writing a few lines of code:
PI/XI: target message logging with local AAE not possible ? not anymore...
*Please upload the file in any free site or <REMOVED BY MODERATOR>
<READ RULES OF ENGAGEMENT>
Thanks,
Edited by: Prateek Raj Srivastava on Jan 6, 2012 9:10 PM

Auto restart of messages failed in Adapter Engine PI 7.0 and 7.1

Hi,
I am trying to figure out a way to automatically restart the messages failed with in the adapter engine (because of the target system not available etc.). These messages are in System Error status and I can restart them from RWB. But I am looking for any report or something available either on Java or ABAP engines so that I can automate the process.
Thanks for the help.
VJ

I have come across the web service AdapterMessageMonitoring in PI 7.0 (Found it in Web service navigator) with possibly useful methods. But I could not find the same service on PI 7.1. Any clue on this?
Also, the getMessageList methods works perfectly as expected but the resendMessages mehtod fails with the exception -
com.sap.engine.services.ejb.exceptions.BaseEJBException xmlns:ns1="http://sap-j2ee-engine/client-runtime-error">Exception in method resendMessages.</ns1:com.sap.engine.services.ejb.exceptions.BaseEJBException>
Will post more if move forward.
VJ

Cancelling/Deleting messages in the adapter engine

Similar Messages

Maybe you are looking for