Cancleling a background job through ABAP code

hi
in my report i have a condition like this
if s_erdat > sy-datum.
xxxxxxxx
xxxxxxxxxxx
xxxxxxxxx
xxxxxxxx
endif.
if my selection screen date is grater than the system date i dont need to run the report at all
when i am running this report in back ground and i have given the erdat date greater than the system date my job status is finished.
but i dont want the job to be finished i want the job to be cancled. in this case how i need to modify the code

if s_erdat > sy-datum.
xxxxxxxx
xxxxxxxxxxx
xxxxxxxxx
xxxxxxxx
else.
message e001 text-001. "date is lower than the current date.
endif.
if you raise a error message background job will be cancelled with the text 001 in job spool..
Edited by: Jackandjay on Apr 22, 2008 12:57 AM

Similar Messages

How to debug the background job in ABAP

Hi Guys,
Can anyone let me know how to debug the background job in ABAP.
Thanks in advance
peter

Hi,
Goto SM37 and see the log if any is there and based on that you can check the code.
you can't debug background job.
Create a Variant for the Program and
Schedule JOB in background:
Go to SM36 create a Job
enter Program and Variant for that program in STEP..
click on Start Condition
Click on DATE and TIME enter date scheduled Start and END times
click on Period Values
Click on HOURLY/WEEKLY etc
CLick on RESTRICTIONS also to use further criteria.
so your job will be scheduled and run as per your requirement.
and in SM37 Transaction check the status of that JOB
Check this link for scheduling jobs..
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7f87505211d189550000e829fbbd/content.htm
Check this
http://jplamontre.free.fr/SAP/Debug%20background%20process.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/abap+debugger&
Regards,
Padmam.

Help regarding calling BRFPLUS function through ABAP code

Hi,
      I have a situation where I have to input data into a BRFPLUS function as a table (i.e the data is input as select options where list or range of data can be provided).The corresponding output is also in the form a table .I've created this function in BRFPLUS and is working fine .Now I have to call it through ABAP code.Can someone kindly provide me with the probable code for this scenario.
E.g:
        ZT_MATNR is the table in brfplus representing the list of MATNR values input along with other such inputs to function module Z_FM
        ZT_ATM   is the resultant output table of the function which contains several fields.
Now I have to call this BRFPLUS function with help of ABAP code.Could someone kindly help.

Hello ,
There should be a number of BRF+ tutorials available in SCN which discuss the FDT APIs. You can have a look at them to get an idea of the various APIs available and their uses.
For your usecase, you should do the following.
        lo_fdt_function         TYPE REF TO if_fdt_function,
        lo_fdt_result           TYPE REF TO if_fdt_result,
* Get function handle
      CALL METHOD lo_fdt_factory->get_function
        EXPORTING
          iv_id       = lv_function_id
        RECEIVING
          ro_function = lo_fdt_function.
where lv_function_id is the GUID of the BRF+ function . You can either make it a constant , or you can use a FDT API to get the function GUID from the BRF+ application name and function name.
*   Set function context
    TRY.
        CALL METHOD lo_fdt_context->set_value
          EXPORTING
            iv_id    =
            ia_value =
This is one way to set the input context ( pass the input to the BRF+ function to process ). There are other ways to do this as well. Which one you use would depend on the kind of input you want to pass.
* Execute BRFPLUS function
TRY.
      CALL METHOD lo_fdt_function->process
        EXPORTING
          io_context = lo_fdt_context
        IMPORTING
          eo_result = lo_fdt_result.
* Get result output
TRY.
      CALL METHOD lo_fdt_result->get_value
        IMPORTING
          ea_value =
Another direct way of doing it would be to use the method PROCESS of the class CL_FDT_FUNCTION_PROCESS.
I have not gone into much explaination here , but it should provide you an idea of how you can go about it.Read the SCN docs on the APIs to get a better idea , or better still if you can get hold of a copy of the BRF+ book by Carsten Ziegler , you will get an end to end explaination of all BRF+ APIs in it.
Regards,
Indranil.

Uncaught Exception occured while sending mail through abap code.

Hi,
Uncaught Exception occured while sending mail through abap code.Run time Errors "UNCAUGHT_EXCEPTION" occured after excuting the call method CALL METHOD SEND_REQUEST->SEND( ).kindly help in resolving the issue.

HI,
Runtime Error: UNCAUGHT_EXCEPTION details.
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_ADDRESS_BCS
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_ADDRESS_BCS' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLZSEND_MAIL' has to be
     terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ADDRESS_BCS', was not caught in
    procedure "SEND_MAIL" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An exception occurred
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_ADDRESS_BCS"
    "SAPLZSEND_MAIL" or "LZSEND_MAILU01"
    "ZSEND_EMAIL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEND_MAIL" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
Please help me to resolve this issue.

Triggering Process chains through abap code

Hi Experts,
Can you please let me know if it is possible to trigger a BW Process chain using an abap code.
If yes , kindly let me know the sample code.
Help done would be appreciated.
Regards,
Uday

Hi Thanks for your reply.
When I am trying to execute process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chain being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated.

Restrict background Jobs thro' ABAP Program

Hello,
While I was working in one of the customer place , they restricted the background jobs thro' one ABAP program for customer reports . Unfortunately , I don't have the source code with me. As you are all aware that users fires the background jobs for different periods so that he/she can submit the reports to the higher up in time.
Scenario : I have 10 application servers and each application has 20 work processes ( 12-Dialog,4-Background,3-spool,1-Gateway). I would like to restrict 1 background process/per appl server for customer reports(Y OR Z programs) during the business hours .
It would be great help to Basis Consultants , if you can contribute to restrict the background jobs .
Thanks
Regards,
S.Srinivasan

Hi Daniel,
The program MEREP_DISTRIBUTOR(Client Data Distributor) determines delta data independent of a download request from the client.This is mainly used to reduce the load on the server and scheduling of this program is part of "SAP MI Administration" which is generally performed as part of OR after MI Post Installation steps that recommends you to Schedule Background Jobs for Generic and Smart Sync which you wanted to confirm in your post.So the programs
(1)WAF_MW_MAPPING
(2)WAF_DEPLOYMENT_FROM_ROLES &
(3)MEREP_RETRY_BP
are good enough for scheduling Generic & Smart Sync(in your case for MAM).Apart from these you may have to check up the Handler Settings that is mentioned in my previous post.
Hope this helps.
Thanks
Gisk

How to trigger an existing background job in ABAP program?which fm?

Hi experts,
    how to trigger an existing background job( defined in SM36 ) in ABAP program?which fm?
    seems that FM 'JOB_OPEN' / 'JOB_SUBMIT' / 'JOB_CLOSE' can only create a new job.

Hi,
    now my requirement is that sap has generated one job automatically, and then i will have a job name
'XXX'. and then i want to schedule the job in abap program,. which function module could i use ?
my expected fm is that the system will trigger the job after i give the job name and start condition.
i have tried job_open, but it seems just to create a new job. any advice ?

Updating HRP table through abap codes - is it correct

Hi all,
In my hrp1001 table,I want that All Qualifications (Q) and Tasks (T) assigned to all the functional roles (ZF) existing in the system should be transferred to the positions(S) tagged to those respective functional roles.
For that I am supposed to write a code which copies the entries from Qualifications (Q) and Tasks (T) and tag the same to the positions (S).
Below is the sample code which is adding just one record to HRP1001 through abap statment. What I am curious to know is wheather it is logically correct to update HRP table through abap statments or no. If not, Please let me know what should we do as a solution - should we update all records through LSMW of PP01 or any thing else we can do???
REPORT ZHRPAR0005 .
TABLES: HRP1000, HRP1001.
DATA IT_1001 LIKE HRP1001 OCCURS 5 WITH HEADER LINE..
SELECT SINGLE * FROM HRP1001 INTO IT_1001 WHERE OTYPE = 'CP' AND PLVAR = '01' AND SCLAS NE 'S'.
IT_1001-OTYPE = 'S'.
APPEND IT_1001.
INSERT INTO HRP1001 VALUES IT_1001.
Thanks
Ribhu

Hi Ribhu..
there are various FMs available for this purpose..
use those... becasue if u directly insert, update or modify record in HRP1000 or HRP1001...
then some related table might not be updated..
So use FMs..
RH_COPY_INFTY
RH_CUT_INFTY
RH_DELETE_INFTY
RH_INSERT_INFTY
RH_INVERT_RELA_INFTY
RH_UPDATE_INFTY
<b>For IT 1001 </b>
RH_CUT_INFTY_1001_EXT
RH_CUT_INFTY_1001_EXT_GENERIC
RH_DELETE_INFTY_1001_EXT
RH_DEL_INFTY_1001_EXT_GENERIC
RH_INSERT_INFTY_1001_EXT
RH_UPDATE_INFTY_1001_EXT
RH_BASE_READ_INFTY_1001
RH_READ_INFTY_1001
RH_READ_INFTY_1001_EXT
RH_READ_INFTY_1001_EXT_ONLY
Reward if useful
Regards
Prax

Updating HRP tables through abap code- is it correct?

Hi all,
In my hrp1001 table,I want that All Qualifications (Q) and Tasks (T) assigned to all the functional roles (ZF) existing in the system should be transferred to the positions(S) tagged to those respective functional roles.
For that I am supposed to write a code which copies the entries from Qualifications (Q) and Tasks (T) and tag the same to the positions (S).
Below is the sample code which is adding just one record to HRP1001 through abap statment. What I am curious to know is wheather it is logically correct to update HRP table through abap statments or no. If not, Please let me know what should we do as a solution - should we update all records through LSMW of PP01 or any thing else we can do???
REPORT ZHRPAR0005 .
TABLES: HRP1000, HRP1001.
DATA IT_1001 LIKE HRP1001 OCCURS 5 WITH HEADER LINE..
SELECT SINGLE * FROM HRP1001 INTO IT_1001 WHERE OTYPE = 'CP' AND PLVAR = '01' AND SCLAS NE 'S'.
IT_1001-OTYPE = 'S'.
APPEND IT_1001.
INSERT INTO HRP1001 VALUES IT_1001.
Thanks
Ribhu

Hi Ribhu..
there are various FMs available for this purpose..
use those... becasue if u directly insert, update or modify record in HRP1000 or HRP1001...
then some related table might not be updated..
So use FMs..
RH_COPY_INFTY
RH_CUT_INFTY
RH_DELETE_INFTY
RH_INSERT_INFTY
RH_INVERT_RELA_INFTY
RH_UPDATE_INFTY
For IT 1001
RH_CUT_INFTY_1001_EXT
RH_CUT_INFTY_1001_EXT_GENERIC
RH_DELETE_INFTY_1001_EXT
RH_DEL_INFTY_1001_EXT_GENERIC
RH_INSERT_INFTY_1001_EXT
RH_UPDATE_INFTY_1001_EXT
RH_BASE_READ_INFTY_1001
RH_READ_INFTY_1001
RH_READ_INFTY_1001_EXT
RH_READ_INFTY_1001_EXT_ONLY
Reward if useful
Regards
Prax

How to assign a class to the material through ABAP code

Hi,
I am working on a transaction in ABAP which takes material name, material description and a class from the user. Now, after this much input I create the material, its configuration profile through the ABAP code. For this I know I have to make relevant entries in tables MARA, MAKT, CUCO.. and also check for the existence of the class in the table KLAH.
Now the point where I am stuck is that I am not able to get how to assign the class to the material through the code. I am able to get the internal class id from the table KLAH but I am not able to figure how the internal material number is being generated in the table INOB and i need this number as well as the internal class id number to insert a record in the table KSSK to show proper assignment.
Can anyone please suggest me some solutions?
Thanks....

Hi,
I tried using BAPI_OBJCL_CREATE. In order to understand it functioning better I created a material and class (of type 300) through transactions MM01 and cl01 respectively. Then i created a report and called the FM BAPI_OBJCL_CREATE, gave the material name as the material above, table as MARA, class as the one i created above and class type 300. I even analysed the message of the table return (return-message) after executing the report. The messahe said assignment done. But when I checked mnaually in cl20n there was no assignment done to the required material. There was also no entry for the required material in the table INOB which I need.
Can anyoene tell me that where am i going wrong? Please do help.

Workprocess for Infinite background job in ABAP

Dear all,
I have a background job which has an infinite loop i.e. WITHOUT any exit condition. The loop contains WAIT UPTO x mins statement.
So my query is if I run this program in background then will the Background Work process which executes this job, always be occupied and cant be used for other background jobs ? In other words, will I be wasting 1 BG workprocess for this job since it will never be freed to be used for other background jobs?
LOOP AT ITAB
WAIT UP TO x MINS.
ENDLOOP.
Requesting your expert insights .
Thanks in advance.
BR
Nilesh

I am not so sure if this is correct. To my knowledge, BTC processes, as opposed to DIA, never perform "roll out" (e.g. during an RFC call) but just wait until processing continues. I just made a quick test in NW 740 release, there the BTC process remains occupied by my job when it does WAIT UP TO xxx SECONDS. So you occupy one BTC process as long as your job runs.
Please try out yourself and then award points to whoever is right, please.
Regards,
Alex

Append Duplicate entries in Start Routine through ABAP code

Hi Experts,
I need to write an ABAP code in the start routine for the following conditions.
For every record in fiscal period (FISCPER) which has non u2013quarter months eg if Jan/Feb ie (001.2007 or 002.2007) I need to create an additional duplicate record which keeps all the other values same but negates the key figures and replaces the month by a quarter ending month
Eg: if my records are
FISCPER   COMP_CODE    GLACCT       BALANCE
001.2007     1000                     6789090       70
002.2007      1000                    6789090       80
I need to create/append duplicate entries by negating the Balance value and replacing the Fiscper with 003.2007
FISCPER COMP_CODE   GLACCT   BALANCE
003.2007    1000                6789090    -70
003.2007    1000                6789090    - 80
Hence the entire structure should now look like:
001.2007       1000        6789090         70
002.2007       1000        6789090         80
003.2007       1000        6789090        -70
003.2007       1000        6789090       - 80
Similarly, I need to append duplicate entries for all non quarter ending months and replacing the Fiscper with the quarter ending month and also negate the Key figure value.
Hence, similarly,
001.2007        1000            6789090             70
002.2007        1000            6789090             80
003.2007        1000            6789090             -70
003.2007        1000            6789090            - 80
004.2007        1000            6789090              30
005.2007        1000            6789090              90
006.2007        1000            6789090             -30
006.2007        1000            6789090             -90
I am very new to ABAP, can someone please provide the ABAP start routine code for this..
Regards,
Dipali

Hi,
    Check the below code. Paste it in yr Start Routine.
'*'Begin of code
DATA : wa_Data_Package LIKE Data_Package.
DATA : t_Data_Package LIKE Data_Package.
DATA : wa_temp LIKE Data_Package-BALANCE.
Loop at Data_Package into wa_Data_Package.
IF ( wa_Data_Package-FISCPER EQ 001/2007 ) or
     ( wa_Data_Package-FISCPER EQ 002/2007 ).
wa_temp = wa_Data_Package-BALANCE.
t_Data_Package-FISCPER = 003/2007.
t_Data_Package-BALANCE = -wa_temp.
Clear : wa_temp.
ELSEIF ( wa_Data_Package-FISCPER EQ 004/2007 ) or
             ( wa_Data_Package-FISCPER EQ 005/2007 ).
wa_temp = wa_Data_Package-BALANCE.
t_Data_Package-FISCPER = 006/2007.
t_Data_Package-BALANCE = -wa_temp.
Clear : wa_temp.
ELSEIF ( wa_Data_Package-FISCPER EQ 007/2007 ) or
             ( wa_Data_Package-FISCPER EQ 008/2007 ).
wa_temp = wa_Data_Package-BALANCE.
t_Data_Package-FISCPER = 009/2007.
t_Data_Package-BALANCE = -wa_temp.
Clear : wa_temp.
ELSEIF ( wa_Data_Package-FISCPER EQ 010/2007 ) or
             ( wa_Data_Package-FISCPER EQ 011/2007 ).
wa_temp = wa_Data_Package-BALANCE.
t_Data_Package-FISCPER = 012/2007.
t_Data_Package-BALANCE = -wa_temp.
Clear : wa_temp.
ENDIF.
APPEND t_Data_Package to Data_Package
Endloop.
'*'End of code
Regards,
Balaji V

BPC Master Data Deletion through ABAP code

Hi All,
I have a requirement of deleting the orphan nodes for one of the dimension in BPC using ABAP code.
Please let me know any standard program or classes for deleting the master data from dimension.
Regards
Pratibha Biradar

Hi Pratibha,
Here is the code to add master data, you can change the flag to 'D' to delete, i have not checked it for delete, it is working for adding.
DATA: ls_message TYPE uj0_s_message,
lt_messages TYPE uj0_t_message,
l_success TYPE uj_flg,
l_appset_id TYPE uj_appset_id,
l_dimension_id TYPE uj_dim_name,
lo_member_mgr TYPE REF TO if_uja_member_manager,
lo_dimension TYPE REF TO if_uja_dimension_manager,
lo_master_data_store TYPE REF TO if_ujam_master_data_store,
lo_context TYPE REF TO if_uj_context,
ls_dimension TYPE uja_s_dimension,
lt_errors TYPE uja_t_members_error,
lr_members TYPE REF TO data,
lr_data TYPE REF TO data.
FIELD-SYMBOLS:
<lt_member_data> TYPE STANDARD TABLE,
<ls_member_data> TYPE any,
<lv_field> TYPE any.
TRY.
    lo_context = cl_uj_context=>get_cur_context( ).
    cl_uj_context=>set_cur_context(
    i_appset_id = l_appset_id
    i_module_name = lo_context->d_calling_module
    is_user = lo_context->ds_user
    lo_dimension = cl_uja_bpc_admin_factory=>get_dimension_manager(
    i_appset_id = l_appset_id
    i_dimension_id = l_dimension_id
    lo_dimension->get(
    EXPORTING
    if_with_hier_maxlevel = abap_false
    IMPORTING
    es_dimension = ls_dimension
    CREATE OBJECT lo_master_data_store TYPE cl_ujam_master_data_store.
* creating masterdata table
    lr_members = lo_master_data_store->get_table_buffer( ls_dimension ).
    ASSIGN lr_members->* TO <lt_member_data>.
* Add members to <LT_MEMBER_DATA>, these are the member that will be saved.
    CREATE DATA lr_data LIKE LINE OF <lt_member_data>.
    ASSIGN lr_data->* TO <ls_member_data>.
* Fill each field, such as ID, and EVDESCRIPTION, update other fields here as well as
* any properties that need to be updated.
    ASSIGN COMPONENT 'ID' OF STRUCTURE <ls_member_data> TO <lv_field>.
    IF sy-subrc = 0.
      <lv_field> = 'ProductD'.
    ENDIF.
    ASSIGN COMPONENT 'MBR_NAME' OF STRUCTURE <ls_member_data> TO <lv_field>.
    IF sy-subrc = 0.
      <lv_field> = 'ProductD'.
    ENDIF.
    ASSIGN COMPONENT 'EVDESCRIPTION' OF STRUCTURE <ls_member_data> TO <lv_field>.
    IF sy-subrc = 0.
      <lv_field> = 'Product D Update'.
    ENDIF.
    ASSIGN COMPONENT 'PARENTH1' OF STRUCTURE <ls_member_data> TO <lv_field>.
    IF sy-subrc = 0.
      <lv_field> = 'TotalProduct'.
    ENDIF.
    ASSIGN COMPONENT 'OBJVERS' OF STRUCTURE <ls_member_data> TO <lv_field>.
    IF sy-subrc = 0.
      <lv_field> = 'A'. "Version flag, should be "A" for Active
    ENDIF.
    ASSIGN COMPONENT 'ROWFLAG' OF STRUCTURE <ls_member_data> TO <lv_field>.
    IF sy-subrc = 0.
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""Here you can change it to 'D' for Deleting """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
      <lv_field> = 'I'. " This is an action flag, I=Insert, M=Modify """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
    ENDIF.
    APPEND <ls_member_data> TO <lt_member_data>. " Add to the table.
* Create member manager
    lo_member_mgr = cl_uja_bpc_admin_factory=>get_member_manager(
    i_appset_id = l_appset_id
    i_dimension_id = l_dimension_id ).
* Save the members UNCOMMENT ONLY when you want to write the data!!!!!
* lo_member_mgr->save(
* EXPORTING
* ir_members = lr_members " List of members to save
* IMPORTING
* et_errors = lt_errors
* NOW PROCESS THE DIMENSION
    DATA: ls_dimensions TYPE uja_s_dim_name,
    lt_dimensions TYPE uja_t_dim_name.
    CLEAR ls_dimensions. REFRESH lt_dimensions.
    ls_dimensions-dimension = l_dimension_id. " Add dimensions to the list
    APPEND ls_dimensions TO lt_dimensions.
    lo_member_mgr->process(
    EXPORTING
    it_dim_list = lt_dimensions
    if_set_offline = abap_false
    if_validate = abap_true
    IMPORTING
    ef_success = l_success
    et_message_lines = lt_messages ).
CATCH cx_uj_no_auth .
ENDTRY.
hope this will help,
thanks,
Rishi

Call SE11 Search Help through ABAP code.

Hello,
I have a requirement in which I need to call various search helps created through SE11 in a Function Module. I want the Search help to return the Values which I would use in my Function Module.
Please suggest if there's a standard FM/ Statement to process SE11 Search helps.
Thanks,
Shalabh

TYPE-POOLS: shlp.
DATA: l_shlp     TYPE shlp_descr_t,
      l_wa       TYPE ddshiface,
      l_bukrs    TYPE char50,
      l_repid    TYPE syrepid,
      L_DYNNR    TYPE SYDYNNR,
      l_ret_val LIKE ddshretval OCCURS 0 WITH HEADER LINE,
      l_t_fields TYPE dynpread   OCCURS 0 WITH HEADER LINE.
PARAMETERS: p_bukrs TYPE pa0001-bukrs,
            p_werks TYPE pa0001-werks,
            p_btrtl TYPE pa0001-btrtl.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_werks.
FIELD-SYMBOLS <fs> TYPE ddshiface.
l_repid = sy-repid.
L_DYNNR = SY-DYNNR.
CALL FUNCTION 'F4IF_GET_SHLP_DESCR'
    EXPORTING
      shlpname       = 'H_T500P'
*     SHLPTYPE       = 'SH'
    IMPORTING
      shlp           = l_shlp
LOOP AT l_shlp-interface INTO l_wa.
    IF l_wa-shlpfield EQ 'BUKRS'.
      l_wa-valtabname = 'PA0001'.
      l_wa-valfield   = 'BUKRS'.
    ELSEIF l_wa-shlpfield EQ 'PERSA'.
      l_wa-valtabname = 'PA0001'.
      l_wa-valfield   = 'WERKS'.
    ENDIF.
    MODIFY l_shlp-interface FROM l_wa.
ENDLOOP.
* Process standard searchhelp
CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
    EXPORTING
      shlp          = l_shlp
    TABLES
      return_values = l_ret_val.

Get reports content of earlier versions through ABAP code.

Hi All,
I want to get contents of report in an internal table for earlier versions.
Do we have any standard table/FM to get the report's content in our program?
To be more specific I want to know how much line of code added/modified in each versions.
Thanks.
Regards,
PK

hi pranshu,
I find your requirement very different.
i have few doubts, when u mean contents u mean lines of code or the output records of the report.
if u mean lines of code modified u want to know, u have version management where u can find the changed lines of code,since the inception of the program.
regards,

Cancleling a background job through ABAP code

Similar Messages

Maybe you are looking for