Candidate search in recruiter link (E-Recruitment)
Dear friends,
i have a issue in E-Recruitment that when the recruiter goes for search for a candidate to assign it to the requisition, there is no records in the result.
candidate search is not working Kindly help me out . is there anything needs to be configured
Regards
Narayanan
Hi,
Kindly check for this setting in table : V77RCF_SPT_AATYP
Assign Attachment Types to a Search Profile Type
Use
In this IMG activity, you determine for each search profile type which attachment types should be taken into account during the full text search. The full text search is only meaningful for attachment types that have already been assigned to the object type of the search profile type.
Requirements
You have defined the attachment types in which you want to perform the full text search.
You have defined search profile types and assigned them to object types.
In the IMG activity Define Use of Attachment Types, you have assigned attachment types to the object types that are assigned to the search profile types.
If this resolves your querie, then award with points.
All the best,
Santosh
Similar Messages
-
Internal error while clicking on Candidate search from Recruiter role-EHP4
Hi
We are getting intrnal error while clicking on candidate search or any search option from recruiter log on after upgrading to EHP4.
after doing analysis through SLG1, we found below issues.
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH_MASK_GROUP====CM009 line 41
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00P line 676
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00R line 18
Customizing table T77RCF_SPT contains no corresponding entry for Business Object =/
The error occurred in program CL_HRRCF_SPT_CUST_TABS========CM00E line 26
We searched in SDN and got one threads with similar kind of errors. As mentioned in the thread, we have activated below items.
1. HCM_ERC_SES_1-activated
2. Customizing table T77RCF_SPT maintained with required information
3. Run report RCF_PERIODICAL_SERVICES to update table T77RCF_INT_PUB.
Still we are getting error as mentioned above. Can anybody help on this?
Regards,
PurnimaDear Purnima,
You should have a look at it in client 000. This is where you can find the table entries how they are shipped with SAP. Problem is that this is the search customizing and if we have other customizing entries in our system they don't suit to your system because I found one different entry in table V77RCF_SMG_NAVI. Please can you check out all tables and compare them with your client 000? (all tables in IMG candidate search > search profile and search templates).
Hope it helps,
Regards
Christine -
Errors in search of candidates in e-Recruiting portal and transaction SLG1
Hi, please need help to:
1. In e-Recruiting portal under the tab "recruiter":
"Services-Candidates-Search for candidates" running "Search button" and are 3 internal error (no detail of the error).
If we ignore the errors and rerun the "Search button" then we appear 1 internal error and a message that "No data available", but we know that there are candidates in the SAP R / 3.
2. When we execute the transaction SLG1 in SAP R / 3 are the following errors:
Fatal error, see log
An exception has been detected in e-Recruiting.
An exception has been detected in relation to the search mask
Technical Details
error ID: 3C466BE84D30748BE10000000A1145AF
Class of error: CX_HRRCF_SEARCH_MASK
context error: CX_HRRCF_SEARCH_MASK
Error in the program emerged
CL_HRRCF_SEARCH_MASK_GROUP====CM003 line 40
An exception has been detected in e-Recruiting.
CL_HRRCF_SEARCH_MASK_GROUP====CPCL_HRRCF_SEARCH_MASK_GROUP====CM00340
Technical Details
error ID: 3C466BE84D30748BE10000000A1145AF
Class of error: CX_HRRCF_SEARCH_MASK
context error: CX_HRRCF_SEARCH_MASK
Thanks.Hi
Sorry, This is a SAP Business One Forum.
Please, move your thread on next link or Category [SAP Solutions|/community [original link is broken];
Thanks,
Felipe Loyola -
Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER. -
Urgent !!!!!!!! E recruiting - Candidate Search not working
Hi experts,
Candidate search of e recruiting is not working. As there are many candidates available in the system still its giving 0 search result. I am not getting why this is happening.
Is there any spro setting required??
Is TREX must for this??
Is any infoquery is required??
Please provide the solution
Thanks
SameerHi Sameer,
which of the candidate search do you think of?
There is the candidate information (the bsp application where you put in first- and lastname and get a list of the matching candidates). This search should always work as it is implmented based on the search help of the business partner and currently does not need the TREX (this will probalbly change with EhP4 when the search is enhanced by the mail address).
The candidate search for requisition assignment or TRM (this crazy screen with the 2 tables where you can select th e different cadidate attributes, set values and move them to the right table to get applied). This search needs the TREX. It is delivered with a base configuration which usually needs only small amounts of customer dependent configuration.
To use the search you have to set up TREX properly and you have to refresh the search profiles which can be done in T-Code SPRO (once at the beginning and always after changing the configuration). After running the IMG point the periodical services have to run in the newer support package levels to get the information to the TREX as this is no longer done directly. Then the TREX needs some time for indexing.
If you use this search please always keep in mind the the result is restricted to candidates with released profile. Other candidates will never be found.
Best Regards
Roman Weise -
E-rec Errors in search of candidates in e-Recruiting portal and transactio
Hi, please need help to:
1. In e-Recruiting portal under the tab "recruiter":
"Services-Candidates-Search for candidates" running "Search button" and are 3 internal error (no detail of the error).
If we ignore the errors and rerun the "Search button" then we appear 1 internal error and a message that "No data available", but we know that there are candidates in the SAP R / 3.
2. When we execute the transaction SLG1 in SAP R / 3 are the following errors:
Fatal error, see log
An exception has been detected in e-Recruiting.
An exception has been detected in relation to the search mask
Technical Details
error ID: 3C466BE84D30748BE10000000A1145AF
Class of error: CX_HRRCF_SEARCH_MASK
context error: CX_HRRCF_SEARCH_MASK
Error in the program emerged
CL_HRRCF_SEARCH_MASK_GROUP====CM003 line 40
An exception has been detected in e-Recruiting.
CL_HRRCF_SEARCH_MASK_GROUP====CPCL_HRRCF_SEARCH_MASK_GROUP====CM00340
Technical Details
error ID: 3C466BE84D30748BE10000000A1145AF
Class of error: CX_HRRCF_SEARCH_MASK
context error: CX_HRRCF_SEARCH_MASK
Thanks.Thanks Shane LaBonte,
Package Bussines. We have the following installed:
RECRUIT 1.40 for BP ERP Recruiter
ADMIN RECRUITING BP 1.40 for ERP Administrator Functionality
ERP05 BP 1.41 COMMON PARTS
MSS ERP05 BP for Manager Self Service 1.41
ESS ERP05 BP for Employee Self Service 1.41
We have activated 4. (we EHP4)
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_SES_1
Is there anything else we should take account?
Regard -
Candidate search issue in E-Recruitment
Hi,
We have upgraded recently to EHP4, & for indexing we have applied the
sap Note 1098046 ,all the search are working except candidate search
under candidate selection ,On click of start search no results are
displayed
Software Details
ECC 6.0
ERECRUIT 604 LEVEL 003
The Steps that we have followed is given below
1.Login as Recruiter
2.Click on Candidate Selection
3.Select any one requisition & click on candidate search
4.select any of the search criteria & click on add
5.click on start search
Regards
RajivHello Rajiv,
Please check if the job RCF_PERIODICAL_SERVICES job is active and further you can also check if there is any issue with the indexing of Candidate information using SKPR07. Select the relevant Document class and language and do Test-indexing.
If inconsistencies are found, try to re-index but with a caution.
Please do not re-index unless the RCF_PERIODICAL_SERVICES job is stopped. When re-indexing is done, if the job RCF_PERIODICAL_SERVICES is running, it is possible that the index will be corrupted.
Hope this information helps.
Best Regards
G Raj -
E-recruiting - Problems with candidate search
Hi experts,
I'm trying to test some enhancements in E-recruiting and I'm facing problems with the candidate search. At firts I thought the problem was with Trex, but after run report RCF_RECREATE_SEARCH_PROFILES I've found the errors below:
Error in program CL_HRRCF_SPB_CANDIDATE========CM003 line51
Error in program CL_HRRCF_SP_BUILDER===========CM003 line115
Error in dinamic calling method for class CL_HRRCF_CEC_INFOTYPE
Error in program CL_HRRCF_CEC_INFOTYPE=========CM005 line 83
Error in program CL_HRRCF_CEC_INFOTYPE=========CM005 line 68
Does anybody know what these errors mean?
Thanks in advance for any kind of help!
Best regards,
ThaisHi again,
Based on the reply I got for this thread I corrected an inconsistency I've found in the category of seach table, it was using a table as structure instead of an infotype. I've run report RCF_RECREATE_SEARCH_PROFILES again and the error is still the same.
As other trex searches such as advertise search is not working, I believe the problem is not only this, because this other seach uses another search profile that was not enhanced.
Does anybody has another suggestion?
Thanks in advance for any input!
Best regards,
Thais -
E-recruiting - Weighting in Candidate search
How can we assign different weights to search criteria during a candidate search in e-recruiting. Currently, if I am using 5 criterias for candidate search, it only gives result with match as 100 % though I want to differentiate in the criterias by assigning different weights/ importance to each one.
Thanks in advance,
DevyashHi again,
Based on the reply I got for this thread I corrected an inconsistency I've found in the category of seach table, it was using a table as structure instead of an infotype. I've run report RCF_RECREATE_SEARCH_PROFILES again and the error is still the same.
As other trex searches such as advertise search is not working, I believe the problem is not only this, because this other seach uses another search profile that was not enhanced.
Does anybody has another suggestion?
Thanks in advance for any input!
Best regards,
Thais -
"Search for Jobs" link not working in E-Recruitment
Hi,
Whenever Employee/External Candidate clicks on the link "Search for Jobs" on the start page, list of jobs are not getting displayed despite after data is available.Hi ,
Go to SPRO-personnel management-Employee self services-homepage framework - resources-edit resources
select the resource for Search for job .... and check if the URL path is given.
Thanks
Sunitha -
E-Recruitment: Candidate search is not working
Hi ,
Issue : Even putting * in search for text box i am not getting candidate name in candidate search..
Please help me out in this issue...which setting i need to take care.
kindly find attachment.Hi Honey,
Please check the wiki pages created for SES search issues:
http://wiki.scn.sap.com/wiki/x/ThoMDg
Best regards,
Nicole -
Reg : E-Recruitment TRM candidate Search
Hi all,
I would like to know how the talent pool gets accumulated with candidates. how the candidates are listed in the Talent Pool?
Is there any particular transaction in R/3 where we can check or tables if any?
Thanks
PriyaHello Elam,
TRM candidate search finds all candidates which have their profile released (table hrp5102, candidate status not 0). Of course it requires the TREX indexing works correctly, including the periodical services running which trigger the indexing.
Best Regards
Roman -
ERec: External Candidate as a Recruiter??
Hi All,
In EHP4, can we map the External Candidate as a Recruiter, bcoz our client is hiring few candiates on contract basis and want them to do the 'Recruiter' role from frontend.
But as per our Standard functionality, HR Objects can be created successfully for internal candidates only.
We created the CP in HCM system, but that CP is not transfering to E-rec system. HR Objects itself not at all transferd to E-rec system for external candidate.
Any one can share their valauble sugessions on this scenario.
Thanks,
Asha...Hello Asha,
handling of contract workers differs from company to company.
If the contract workers are in the HR core system as active employees they will be transfered to the e-recruiting system using the standand functionality to create internal candidates for them.
If the contract workers are in the HR system but not in active status, you could use the ALE outbound BAdI to rewrite their status for the IDoc (infotype 0000, field STAT2). This way the e-recruiting system would also use the standard functionality to create internal candidates.
If the contract workers are not in the HR core system at all, I would use the e-recruiting administrator function or the report RCF_CREATE_USER to create internal candidates for them directly on the e-recruiting system. Use a number range for their employee Ids which is blocked in HR core so there won't be any issues with future employees transferred.
Kind Regards
Roman -
E-Rec CANDIDATE SEARCH (debug)
I go "candidates search" (un filtered by nothing) and does not leave any results. I want to debug to find out you're looking for the system. Which program or function can i used for debug in SAP R3?
GreetingsPlease, how can we extract the class name and / or the name of the method to debug functionality of the portal through SAP R / 3?
Are there transactions SA R / 3 for debug functionality of the portal in the tab "Recruiter"?. For example, we know that there is a SAP R/3 transaction "pz21" to debug "Job Posting" for ESS (Table t77www_srv)
We can not get debug when adding external breakpoint in SAP R / 3 in class and / or methods:
CL_HRRCF_SEARCH
SEARCH_ON_SES_OBJECTS
CL_HRRCF_SEARCH
CL_HRRCF_SM_ELEMENT
CL_HRRCF_CEC_CAND_TG
CL_HRRCF_CLASSIC_SEARCH_PL
Objective: To debug the portal "Candidate Search" in the tab "Recruiter. "
Debug is required by the message: "No data available", but that there are candidates in the SAP R/3 (un filtered by nothing).
Thanks. -
Erecruitment - Candidate search
Hi,
We have a problem.
Actually, in E-Recruitment -> candidate search -> when we search with employee first name or second name , it displays the user names with personal number and the mail ids (permanent employees).
But one user , who has changed from Temp to permanent recently, when i search , it is giving me old details (temporary). What is missed. This issue is only for one employee. The records are not showing for him with the correct permanent details.
Please suggest.
Thanks,
Sankar.refer below might helpful to u :-
Customizing of the Search in SAP E-Recruiting - Cross Processes (Recruitment) - SAP Library
check the end date of probation period and try once
Maybe you are looking for
-
I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination
-
File system corrupted *after* it was unmounted
Hi all, I'd be interested in any opinions on this problem. I recently bought a 1TB Samsung Story Station 3 usb hard drive for use with Time Machine. This model of drive has a power switch on the front. Most of the time I don't need hourly backups so
-
Can someone please point me to instructions on how to incorporate button images in horizontal Spry menus?
-
WRE54G v3 - WEP key setting when using ASCII passphrase
When entering WEP information for this device you may notice that the range expander is asking for the WEP key in hex (for example: 128 bits 26 hex digits). If the key that you have set in your router is using a passphrase then you will need to conve
-
Error while using the sample My Contacts portlet
Hi, I am trying to use sample portlet "My Contacts" in my portal's page but getting the following error: Compilation of JSP File '/portlets/collaboration/nativedb/contact/Content/index.jsp' failed: Errors found in C:\bea\weblogic81\samples\portal\por