Candidate Search - No Results from Attachments

Hello Experts
I am trying to search for text from the attached documents during Candidate Search, but I get "No Data Available"
I have Created an External Application and attached a resume, but when I try to search using text from the resume it gives me "No Data Available"
Any suggestions
Regards
Mark

Dear Mark,
If your TREX configuration is OK then check the status of the External Application, status should be active.
You can change the application status under TRM activities.
Hope this would help
Chohan

Similar Messages

In list view: Why don't searches include results from the Collections field? Why won't the Collections column sort properly?

In list view: Why don't searches include results from the Collections field? Why won't the Collections column sort properly?

I create a new index on column2, (INDEX_N3)
and change SQL to
select 1 from table T1 where
T1.COLUMN_002 = '848K 36892'
This time INDEX_N3 will be used.
but change SQL to
select 1 from table T1 where
T1.COLUMN_002 = '848K 36892'
and T1.COLUMN_004 = '1000'
The explain plan will show full scan.
Why？
Thanks.

ERecruiting candidate search no result

Hi
In eRecruiting (Rel. 6) (without SES Service) we can't find any
candidates ( Search Profile INT_CAND, cdcycandsearch BSP) if we are for example searching
for education type = University.
Although we think we set up Trex, Search Profiles etc. correctly, because we followed all possible
instructions given by SAP and double checked all settings.
In SKPR07 we checked if there are XML-Documents of type INT_CAND. The documents are
there. But if we try to search for a certain value from within the xml file, nothing can be found.
Anyone has any idea? If you need more details, I am glad to provide them.
Thanx a lot
Paul
Edited by: Paul Föhn on Aug 13, 2008 3:07 PM
Edited by: Paul Föhn on Aug 13, 2008 3:07 PM

Dear Mark,
If your TREX configuration is OK then check the status of the External Application, status should be active.
You can change the application status under TRM activities.
Hope this would help
Chohan

ADFS SSO and SharePoint 2013 on-premise Hybrid outbound search results from SharePoint Online - does it work?

Hi,
I want to setup an outpund hybrid search for SharePoint 2013 on-premise to SharePoint Online.
But I'm not shure if this works with ADFS SSO.
Has somebody experience with this setup?
Here's my guide which I'm going to use for this installation:
Introduction
In this post I'll show you how to get search results from your SharePoint Online in your SharePoint 2013 on-premise search center.
Requirements
User synchronisation ActiveDirectory to Office 365 with DirSync
DirSync password sync or ADFS SSO
SharePoint Online
SharePoint 2013 on-premise
Enterprise Search service
SharePoint Online Management Shell
Instructions
All configuration will be done either in the Search Administration of the Central Administration or in the PowerShell console of your on-premise SharePoint 2013 server.
Set up Sever to Server Trust
Export certificates
To create a server to server trust we need two certificates.
[certificate name].pfx: In order to replace the STS certificate, the certificate is needed in Personal Information Exchange (PFX) format including the private key.
[certificate name].cer: In order to set up a trust with Office 365 and Windows Azure ACS, the certificate is needed in CER Base64 format.
First launch the Internet Information Services (IIS) Manager
Select your SharePoint web server and double-click Server Certificates
In the Actions pane, click Create Self-Signed Certificate
Enter a name for the certificate and save it with OK
To export the new certificate in the Pfx format select it and click Export in the Actions pane
Fill the fields and click OK Export to: C:\[certificate
name].pfx Password: [password]
Also we need to export the certificate in the CER Base64 format. For that purpose make a right-click on the certificate select it and click on View...
Click the Details tab and then click Copy to File
On the Welcome to the Certificate Export Wizard page, click Next
On the Export Private Key page, click Next
On the Export File Format page, click Base-64 encoded X.509 (.CER), and then click Next.
As file name enter C:\[certificate
name].cer and then click Next
Finish the export
Import the new STS (SharePoint Token Service) certificate
Let's update the certificate on the STS. Configure and run the PowerShell script below on your SharePoint server.
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# import it
Set-SPSecurityTokenServiceConfig -ImportSigningCertificate $PfxCert
Type Yes when prompted with the following message.
You are about to change the signing certificate for the Security Token Service. Changing the certificate to an invalid, inaccessible or non-existent certificate will cause your SharePoint installation to stop functioning. Refer
to the following article for instructions on how to change this certificate: http://go.microsoft.com/fwlink/?LinkID=178475. Are you
sure, you want to continue?
Restart IIS so STS picks up the new certificate.
& iisreset
& net stop SPTimerV4
& net start SPTimerV4
Now validate the certificate replacement by running several PowerShell commands and compare their outputs.
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
# get the encrypted pfx certificate object
New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# compare the output above with this output
(Get-SPSecurityTokenServiceConfig).LocalLoginProvider.SigningCertificate
[/code]
## Establish the server to server trust
[code lang="ps"]
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
Import-Module MSOnline
Import-Module MSOnlineExtended
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# set the onpremise domain that you added to Office 365
$SPCN = "sharepoint.domain.com"
# your onpremise SharePoint site url
$SPSite="http://sharepoint"
# don't change this value
$SPOAppID="00000003-0000-0ff1-ce00-000000000000"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# get the raw data
$PfxCertBin = $PfxCert.GetRawCertData()
# create a new certificate object
$X64Cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
# import the base 64 encoded certificate
$X64Cert.Import($X64CertPath)
# get the raw data
$X64CertBin = $X64Cert.GetRawCertData()
# save base 64 string in variable
$CredValue = [System.Convert]::ToBase64String($X64CertBin)
# connect to office 3656
Connect-MsolService
# register the on-premise STS as service principal in Office 365
# add a new service principal
New-MsolServicePrincipalCredential -AppPrincipalId $SPOAppID -Type asymmetric -Usage Verify -Value $CredValue
$MsolServicePrincipal = Get-MsolServicePrincipal -AppPrincipalId $SPOAppID
$SPServicePrincipalNames = $MsolServicePrincipal.ServicePrincipalNames
$SPServicePrincipalNames.Add("$SPOAppID/$SPCN")
Set-MsolServicePrincipal -AppPrincipalId $SPOAppID -ServicePrincipalNames $SPServicePrincipalNames
# get the online name identifier
$MsolCompanyInformationID = (Get-MsolCompanyInformation).ObjectID
$MsolServicePrincipalID = (Get-MsolServicePrincipal -ServicePrincipalName $SPOAppID).ObjectID
$MsolNameIdentifier = "$MsolServicePrincipalID@$MsolCompanyInformationID"
# establish the trust from on-premise with ACS (Azure Control Service)
# add a new authenticatio realm
$SPSite = Get-SPSite $SPSite
$SPAppPrincipal = Register-SPAppPrincipal -site $SPSite.rootweb -nameIdentifier $MsolNameIdentifier -displayName "SharePoint Online"
Set-SPAuthenticationRealm -realm $MsolServicePrincipalID
# register the ACS application proxy and token issuer
New-SPAzureAccessControlServiceApplicationProxy -Name "ACS" -MetadataServiceEndpointUri "https://accounts.accesscontrol.windows.net/metadata/json/1/" -DefaultProxyGroup
New-SPTrustedSecurityTokenIssuer -MetadataEndpoint "https://accounts.accesscontrol.windows.net/metadata/json/1/" -IsTrustBroker -Name "ACS"
Add a new result source
To get search results from SharePoint Online we have to add a new result source. Run the following script in a PowerShell ISE session on your SharePoint 2013 on-premise server. Don't forget to update the settings region
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# region settings
$RemoteSharePointUrl = "http://[example].sharepoint.com"
$ResultSourceName = "SharePoint Online"
$QueryTransform = "{searchTerms}"
$Provier = "SharePoint-Remoteanbieter"
# region settings end
$SPEnterpriseSearchServiceApplication = Get-SPEnterpriseSearchServiceApplication
$FederationManager = New-Object Microsoft.Office.Server.Search.Administration.Query.FederationManager($SPEnterpriseSearchServiceApplication)
$SPEnterpriseSearchOwner = Get-SPEnterpriseSearchOwner -Level Ssa
$ResultSource = $FederationManager.GetSourceByName($ResultSourceName, $SPEnterpriseSearchOwner)
if(!$ResultSource){
Write-Host "Result source does not exist. Creating..."
$ResultSource = $FederationManager.CreateSource($SPEnterpriseSearchOwner)
$ResultSource.Name = $ResultSourceName
$ResultSource.ProviderId = $FederationManager.ListProviders()[$Provier].Id
$ResultSource.ConnectionUrlTemplate = $RemoteSharePointUrl
$ResultSource.CreateQueryTransform($QueryTransform)
$ResultSource.Commit()
Add a new query rule
In the Search Administration click on Query Rules
Select Local SharePoint as Result Source
Click New Query Rule
Enter a Rule name f.g. Search results from SharePoint Online
Expand the Context section
Under Query is performed on these sources click on Add Source
Select your SharePoint Online result source
In the Query Conditions section click on Remove Condition
In the Actions section click on Add Result Block
As title enter Results for "{subjectTerms}" from SharePoint Online
In the Search this Source dropdown select your SharePoint Online result source
Select 3 in the Items dropdown
Expand the Settings section and select "More" link goes to the following URL
In the box below enter this Url https://[example].sharepoint.com/search/pages/results.aspx?k={subjectTerms}
Select This block is always shown above core results and click the OK button
Save the new query rule

Hi Janik,
According to your description, my understanding is that you want to display hybrid search results in SharePoint Server 2013.
For achieving your demand, please have a look at the article:
http://technet.microsoft.com/en-us/library/dn197173(v=office.15).aspx
If you are using single sign-on (SSO) authentication, it is important to test hybrid Search functionality by using federated user accounts. Native Office 365 user accounts and Active Directory Domain Services
(AD DS) accounts that are not federated are not recognized by both directory services. Therefore, they cannot authenticate using SSO, and cannot be granted permissions to resources in both deployments. For more information, see Accounts
needed for hybrid configuration and testing.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.

Hello Guys,
I am creating resultsource from central admin. If I create it from central admin it works fine. But if I am creating result source from power shell scripts it shows me following error message.
An exception of type 'Microsoft.Office.Server.Search.Query.InternalQueryErrorException' occurred in Microsoft.Office.Server.Search.dll but was not handled in user code
Additional information: Search has encountered a problem that prevents results from being returned. If the issue persists, please contact your administrator.
Any suggestion ?
Thanks in Advance.

Hi,
Please provide more specific information about the issue. What type of content source you tried creating via powershell?
Make sure you are using the approproate permission and search service application.
Here is the reference for creating content resource via script:
http://technet.microsoft.com/en-us/library/ff607867(v=office.15).aspx
Regards,
Rebecca Tu
TechNet Community Support

How to search XML data from a HTTPMultiService and display the result on the Spark List

Hello all,
I am totally new to Flash Builder and Actionscript and hope someone might be able to help me out. I basically create a mobile app with a single view. The view has a TextInput as a search box and a search button. I conntected a Data/Service using a local XML file and bind the Data to a Spark List. Innitally the List will show nothing until the user enter the search term and hit the button. The List suppose to show the XML data that match the search term.
Now is my problem. I cannot make the List to show the data that match the search text. The List just shows ALL the data.
Here are my MXML code:
<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
        xmlns:s="library://ns.adobe.com/flex/spark"
        xmlns:shopping="services.shopping.*"
        title="Search">
    <fx:Script>
        <![CDATA[
            import mx.events.FlexEvent;
            protected function button1_clickHandler(event:MouseEvent):void
                navigator.popView();
            protected function list_creationCompleteHandler(event:FlexEvent):void
                getDataResult.token = shopping.getData();
            protected function seach_clickHandler(event:MouseEvent):void
                getDataResult.token = shopping.getSearchData(searchTxt.text);
        ]]>
    </fx:Script>
    <fx:Declarations>
        <s:CallResponder id="getDataResult"/>
        <shopping:Shopping id="shopping"/>
        
    </fx:Declarations>
    <s:actionContent>
        <s:Button height="79" label="Back" click="button1_clickHandler(event)"/>
    </s:actionContent>
    <s:List id="list" left="0" right="0" top="111" bottom="0"
            creationComplete="list_creationCompleteHandler(event)" labelField="english">
        <s:AsyncListView list="{getDataResult.lastResult}"/>
    </s:List>
    <s:TextInput id="searchTxt" x="80" y="34" width="250" height="49" enabled="true"
                 prompt="search..."/>
    <s:Button id="search" x="338" y="35" width="72" height="49" label="s"
              click="seach_clickHandler(event)"/>
</s:View>
Here is the _Super_Shopping.as file:
* This is a generated class and is not intended for modification. To customize behavior
* of this service wrapper you may modify the generated sub-class of this class - Shopping.as.
package services.shopping
import com.adobe.fiber.core.model_internal;
import com.adobe.fiber.services.wrapper.HTTPServiceWrapper;
import com.adobe.serializers.xml.XMLSerializationFilter;
import mx.rpc.AbstractOperation;
import mx.rpc.AsyncToken;
import mx.rpc.http.HTTPMultiService;
import mx.rpc.http.Operation;
import valueObjects.Shop;
[ExcludeClass]
internal class _Super_Shopping extends com.adobe.fiber.services.wrapper.HTTPServiceWrapper
    private static var serializer0:XMLSerializationFilter = new XMLSerializationFilter();
    // Constructor
    public function _Super_Shopping()
        // initialize service control
        _serviceControl = new mx.rpc.http.HTTPMultiService();
         var operations:Array = new Array();
         var operation:mx.rpc.http.Operation;
         var argsArray:Array;
         operation = new mx.rpc.http.Operation(null, "getData");
         operation.url = "assets/data/shopping.xml";
         operation.method = "GET";
         operation.serializationFilter = serializer0;
         operation.properties = new Object();
         operation.properties["xPath"] = "/::shop";
         operation.resultElementType = valueObjects.Shop;
         operations.push(operation);
         operation = new mx.rpc.http.Operation(null, "getSearchData");
         operation.url = "assets/data/shopping.xml";
         operation.method = "GET";
         operation.resultFormat = "text";
         argsArray = new Array("item");
         operation.argumentNames = argsArray;
         operation.properties = new Object();
         operation.properties["xPath"] = "/::shop";
         operation.resultElementType = valueObjects.Shop;
         operations.push(operation);
         _serviceControl.operationList = operations;
         preInitializeService();
         model_internal::initialize();
    //init initialization routine here, child class to override
    protected function preInitializeService():void
      * This method is a generated wrapper used to call the 'getData' operation. It returns an mx.rpc.AsyncToken whose
      * result property will be populated with the result of the operation when the server response is received.
      * To use this result from MXML code, define a CallResponder component and assign its token property to this method's return value.
      * You can then bind to CallResponder.lastResult or listen for the CallResponder.result or fault events.
      * @see mx.rpc.AsyncToken
      * @see mx.rpc.CallResponder
      * @return an mx.rpc.AsyncToken whose result property will be populated with the result of the operation when the server response is received.
    public function getData() : mx.rpc.AsyncToken
        var _internal_operation:mx.rpc.AbstractOperation = _serviceControl.getOperation("getData");
        var _internal_token:mx.rpc.AsyncToken = _internal_operation.send() ;
        return _internal_token;
    public function getSearchData(item:String) : mx.rpc.AsyncToken
        var _internal_operation:mx.rpc.AbstractOperation = _serviceControl.getOperation("getSearchData");
        var _internal_token:mx.rpc.AsyncToken = _internal_operation.send(item);
        return _internal_token;
The getSearchData() supposed to return XML data that match the search text, but it doesn't. Can anyoen help?
Thank you!

Hi,
are you able to change dynamically the operation.url = "assets/data/shopping.xml";?
i need to do that based on the users input.
Thanks in advance,

Clicking a search result from search bar goole seaech, always opening google home page but only can open search in new tab by middle click,really frustrating.

Whenever i am clicking search result from Google search bar, it always opens the Google home page. I can only open search result in new tab by double clicking. It started when i installed Firefox 12.

@mstm, please ensure that you write some thing in search bar before you click search icon. without entering anything will redirect to google.com. And make sure that you are clicking on search icon not home icon.

Internal error while clicking on Candidate search from Recruiter role-EHP4

Hi
We are getting intrnal error while clicking on candidate search or any search option from recruiter log on after upgrading to EHP4.
after doing analysis through SLG1, we found below issues.
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH_MASK_GROUP====CM009 line 41
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00P line 676
Serious error; see log
The error occurred in program CL_HRRCF_SEARCH===============CM00R line 18
Customizing table T77RCF_SPT contains no corresponding entry for Business Object =/
The error occurred in program CL_HRRCF_SPT_CUST_TABS========CM00E line 26
We searched in SDN and got one threads with similar kind of errors. As mentioned in the thread, we have activated below items.
1. HCM_ERC_SES_1-activated
2. Customizing table T77RCF_SPT maintained with required information
3. Run report RCF_PERIODICAL_SERVICES to update table T77RCF_INT_PUB.
Still we are getting error as mentioned above. Can anybody help on this?
Regards,
Purnima

Dear Purnima,
You should have a look at it in client 000. This is where you can find the table entries how they are shipped with SAP. Problem is that this is the search customizing and if we have other customizing entries in our system they don't suit to your system because I found one different entry in table V77RCF_SMG_NAVI. Please can you check out all tables and compare them with your client 000? (all tables in IMG candidate search > search profile and search templates).
Hope it helps,
Regards
Christine

When using the search function in mail I only see results from the current year. how can I see results from all years?

When searching mail results only contain messages from the current year. I'd like to see results from all years. This just started after upgrading from Snow leopard to Lion.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

Clear search results from Content Services Windows Crawl 6.1

We have ALI Content Services Windows Files 6.1 with a crawl job on a network location. It works fine. Now we have changed the location - directory structure. The job, modified with the new location works fine, however, we still see search results from the old location also. Since those documents no longer exist, clicking on the link causes an error. How do we clear the search results?
Thanks.

Have you tried running Search Repair. I believe this should clear out the orphaned search records.

How do I search scanned documents that Adobe Reader reads but shows 0 results from the search?

How do I search scanned documents that Adobe Reader reads but shows 0 results from the search?

If the scanned document was not processed for OCR, then it is just an image and cannot be searched for text.

Candidate Search has no results (No Data Available)

Dear Experts,
Running the "Candidate Search" I always get the "No Data Available" message. The point is I have some candidates availabe and I've run the RCF_CHECK_SEARCH_SETTINGS report with no errors.
I also have run the KPro diagnosis test for document class HR_DOC and the only error statuses I got was 2 "NOCATID" on the last two lines (not sure what they mean as there's no label on those lines).
There's one thread about the same behaviour here ("Candidate Search" service showing "No Data Available") but the profile status is correct.
Checked all the customizing itens mentioned at Help Portal document Customizing of the Search in SAP E-Recruiting - SAP E-Recruiting - SAP Library and still nothing.
Anyone could please give me some help?
Thank you all!
Best Regards.

Hi Liran,
First of all I want to thank you for your help.
1. The ERECRUIT version is 617 SP5 and the active BF is HCM_ERC_SES_1
2. The indexing of ERC_CAND profile runs successfully.
3. I could find candidates by running of the report COM_SE_SEARCH_IIF_TEST.
4. I checked other searches. The first one I tried was the requisitions search and it doesn't work either. Under the requisitions tab, the active queries at the top of the page shows the correct number of results but if I click on any of them to check the requisition details it won't work.
5. A colleague helped me with the debug but according to him it wasn't possible to identify any error.
I've read tons of SAP Notes and articles about TREX and SES configuration but everything I checked was right. Don't have any clue what else could be tested or verified.
Thanks for your help in this matter.
Anaer

Two clicks required to get results from Search Input box on toolbar.

I'm running version 8.02.208.
I'm new at Webhelp and was hoping somebody might be able to give me some pointers.
If I open my published webhelp on the Internet and try to search using the Search Input box on the toolbar the first time, two clicks are required in order to get search results.
This problem only appears the first time, all other searches from the Search Input box on the toolbar work properly with only one click required.
In addition, the Search tool opened from the Search button always works fine first and every time, but I did see the extra space that I've read about.
This is what I don't understand...the problem I mentioned with the 2 clicks required on the toolbar, never happens when I Generate and View the results. Meaning that I am looking at the output but have not published it yet. It works fine first and every time.
Why would the problem show up one way and not the other? Does anyone know what could be different?
I just keep hoping that there is something that I can do to get rid of the problem. I keep getting Problem Reports opened and assigned to me and complaints from customer service from customers. They think the search isn't working and I keep having to explain.....arghhhh!
Thanks!
Deb

Hi Sheryl and Peter,
I have also tried the options as you have suggested without success. Everything works fine when the WebHelp is published to a local or network drive but when it is published to the server the issue occurs.
I would point out too, that I find that the problem with the space only occurs on the intial attempt to search using the Search Box. Any subsequent attempts without closing the browser appear to work fine.
Chris

I am In Philippines and Google only shows Philippine area results,while Iwant search results from the US

Google bases search results based on my IP address. I am in the Philippines . Example, I want to find out how much a cell phone in the US is and I get results from India. I want US Results on my searches. How do I change Google to allow this. I am currently in the Philippines but want Search results for the US

See also:
* Google.com in English - always '.com': https://addons.mozilla.org/firefox/addon/51000

How to prevent Mac OS X's Finder not to show search results from other accounts?

Hello.
How do I have Mac OS X 10.8.3 not show searched file results, on Mac, from other accounts with a standard account? I noticed a standard account found files (test.txt in an admin account in a standard account) and can open them! :O
Thank you in advance.

Barney-15E wrote:
If I'm reading your path correctly, it is because you created the folder at the root of your Home directory.
As I stated above, all users can read your home directory, in order to see into the Sites and Public folders.
Other users, including Admin users, cannot see into the default folders in the Home folder, except Sites and Public.
When you create a folder at the root of your home folder, it inherits the permissions of the parent folder, which allows everyone to read that folder.
If you create a folder at the root of your home, you have to set the permissions on it to prevent others from being able to read it.
To do so, Get Info on the folder and unlock the padlock on the Sharing and Permissions section.
Make sure you are the owner of the folder. Select your name from the list, or add it if it is not. Then, click on the gear button and if it is available, select "Make username the owner." If it is not available, you are already the owner. Also make sure you have Read & Write access. Then, select the staff group and delete it. Then, select everyone and set to No access. Then, select Apply to Enclosed from the gear menu.
To avoid all of this, make your folders inside the default folders (Documents, Pictures, Music, etc.), or one you've already change the permissions on. The Sites and Public folders are visible to all.
Interesting. I didn't want to use Apple's default folders. I want to make my own. I tried chmod -R 700 on my account and that seems to work. Is that enough? I don't see Staff anymore through Get Info.

Candidate Search - No Results from Attachments

Similar Messages

Maybe you are looking for