Cane Be Changed with Query Navigation

Can U tell me how this function works??I tried many times but it behaves like a normal variable without this function....
Help.sap says "you can also access values that are not found in the value area of the variable entry"....How can I access other values?

Shreya
As said we can't find any difference while query is executing and you could filter the variables in the query
designer and you will see dynamic variables while running the query in addition to your selection of variables
Please check this for details
http://help.sap.com/saphelp_nw04/helpdata/en/37/4e3ed4ce9b9a4298ec0ed199512b8c/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/22/1e9b3c334d8c15e10000000a114084/content.htm
Hope this helps
Thnaks
Sat

Similar Messages

What does the option "can be changed in query navigation"?

Hi all,
I have created several variables so far, but I never activated this option. I have always ignored that option and everything works fine.
But now I tried to rebuild some variables from other developers and saw this option activated. So before I just copy them, I need to know, what "can be changed in query navigation" really does. I already have read the SAP Help documents but still don't have a clue about the functionality. Thank you for answering!
Best regards
T. Duong

If you choose the Can Be Changed with Query Navigation option, after you have run the query, not only are you able to select the values that you specified in the variables screen, but you are also able to use other values as dynamic filters for the query .
This function is not possible if you are using the variable as part of a structure in the query definition. The system ignores the setting Can Be Changed with Query Navigation in this case.
Hope it helps.
Regards

BEx "Can be changed in query navigation"

Hi all,
I am using BEX setting for variable "Can be changed in query navigation".
Unfortunately it is not working.
The variable has following setting:
Type of Variable: Hierarchy Node
Processing by: Authorization
It is Ready for Input + Can be changed in query navigation.
Problem is when user filters some value in hierarchy and after that calls variable screen again and runs the report again, the selected hierarchy filter disappear and report display whole hierarchy.
Is it allowed to use Authorization variable with this "can be changed in query navigation" setting?
Any idea what could be wrong?
Thanks a lot.
Best regards,
Petr

Try the following...
Right-click on the InfoObject in the InfoProvider and choose "Provider-Specific Properties". In this menu, change the Display setting to "7 Short Text".
Hope this helps...
Bob

I got i phone 4s 16 gb can i change with i phone 5 to pay some money on top

i got i phone 4s 16 gb can i change with i phone 5 to pay some money on top

No. Apple does not do trade-ins of any kind. Sell your 4S & use the money towards an iPhone 5.

I have iPhone 4 can i change with iPhone 4s?

i have iPhone 4 can i change with iPhone 4s?

I have not sale it but replace it for New Phone
How Many add the Amount, for Replace the Phone

How to make a custom agent with dynamic properties that can be changed with OMS

I have made a custom agent where old documents will be purged. We are doing this with a parameter purgeDate. Now we do this from the Oracle9IfsManager.
So if we want a new date, we have to unload and load the server to use the new date.
I see that some agents can be changed from the OMS. Than they use the new settings after restart.
Who can I do this?

As an FYI: I just solved the problem by going the "low road." I'll be a bit laborious in case someone else wants a solution at a later date (I know I Googled the topic and found nothing). I experimented by simply:
Opening a new email message
Selecting my custom template
Copying the custom signature (Select All)
Opening another new email message
Selecting Edit on the Signature pulldown menu
Hitting the plus symbol to create/add a new signature in the pane
Pasting into the new signature
Naming it
Selecting "Choose signature" at the bottom of the signatures pane
And violà!!
It now appears as a possible selection *and* as the default.
Better yet - it is now my default and will work as a reply to an email.
I think I got it all right in the list above.
OK, granted, this is a pretty simply signature - a list of my website, SoundCloud, twitter etc with those names in bold and a graphic of my color logo - but... it works! YMMV.
Give it to Apple to make it so simple that any fool could do it (that would be me), you wouldn't need a "specialized" app, and - of course - there wouldn't even be instructions on how to do it!
Best,
Joel

How to create a vi with 5 led light up in a series motion and the direction can be change with one button ?

hello, i am new in labview and was given a task to create a vi like the stated above.. can anyone help me..??

mingquanteo wrote:
i hve my stop button inside the loop. but the program still will run even though i press the stop button. anything i did wrong.??
The stop button will only get read every 10 seconds because the code is trapped inside a long sequence structure. Most likely, the button gets read right at the beginning of each itereation, meaning that it can take up to 20 seconds for the program to actually stop.
Why did you change the mechanical action of the stop button.
You also have a very basic misunderstanding of local variables. It makes no sense to read a terminal and wire it to a local variable ot itself.
LabVIEW Champion . Do more with less code and in less time .

Can you change and save navigation buttons in free adober reader XI?

Using Windows 8 and Adobe Reader XI. Can't seem to save changes to navigation buttons i've added so they show for every document i open.
I went into edit/preferences/documents/ checked "Restore last view settings" but still won't save.

Used to be able to in previous versions. Do you know which version and can I revert back to that version?
Sandy Kleinhenz
[signature deleted by host]

Can i change BI Query before loading it to BO using some if than else logic

Hi guys
In my requirement I have a BI query which the users want to run in BO now. Now the requirement is that they want to change some values in the BI query after the BI query has run based on some u201Cif than else logicu201D for each row.
So my question is can BO modify a BI query. Is there some place I can write an abap routine between the BI query and the BO Report.
Thanks

Hi Adnan, in CR you can create Formula Fields, and you can include IF THEN ELSE statements there. This won´t modify the BI query, but´ll modify the results you see in CR (I believe this is what you want)
Here, you have information about formula fields, CR 2008 User Guide in chapter 22
You can do, something like this:
IF {Tabla.Campo}=1
THEN "AAA"
ELSE "BBB"
Hope this helps,
Liliana

Changing variable values in query navigation

Hello,
We used to use the functionality of a user exit variable for a web template query and could enter a default value for a query, like yesterday's date. This allowed the web template to be presented without a user having to enter variables in order to initially see data. Then either dropdowns or the navigation block objects could be used to navigate the query. To do this the, "Can be changed in query navigation", was set to on. In BI 7.0 this functionality has been removed. Is there a way to provide a default value to a characteristic that can still be changed during query navigation?
According to documentation this functionality has been enhanced with default values in the variables but there does not seem to be a way to enter a non-fixed value and still change it during navigation.
Any assistance would be appreciated.
Thanks,
Rick

This can be done by changing the variable to be processed with user exits and changing the user exit for variables to populate the variable value at runtime.

How can I change Time data with List Entry Screen ?

Hi expert.
I transfer Time Data (Infotype 2003) via CAT6.
When I go to transaction PA61 and click List Entry icon.
Record is display and cannot change data.
If I wanna change data.I must to click Choose Icon one by one record.
How can I change data with List Entry Screen?
ps. If record create via PA61. I can change data with List Entry Screen.
I can't change with record that create via CAT6.
Best Regards.

have u tried to change your time entry through CAT2 tcode, ithink if u have created profile for time entry then it should allow you to change and you can use esc otherwise, its generally the standard profile given by SAP. but is 4 one user
hope this helps
guds

Why some items can not change issue method in Production Order?

Hi,
I have a Production Order which had been released.
As some reason, I need to change issue method on some items in this Production Order, but I found that some items can be changed with a dropdown list, and some items can not be changed without dropdown list.
Why they are different?
What should I do to meet my users' request?
Thanks.

Hai wilson,
sorry i visits forum after long time .. item category means , when create item group there are two option Service / Material if u select service , inventory come under that group only in "Back flush" other wise u can select "Manual / Back flush"
Regards
Janeesh

Function module for FI document change with G/L line items

Hi!
Does anybody know how to change FI document with G/L line items (fields like XREF3, SGTXT, ZUONR - generally speaking, all the fields can be changed with FB02)?
FM FI_DOCUMENT_CHANGE has needed functionality and works well for account payables and account receivables line items, but it doesn't handle general ledger line items.
Regards,
Maxim.

Hello!
The function has some mandatory fields to use:
I_AWTYP -> get value from BKPF-AWTYP for the specific document;
I_AWREF -> number of the document to change;
I_AWORG-> concatenate document's company with respective year;
Then, only one of the following fields should be filled:
i_lifnr,
i_kunnr,
i_obzei,
i_buzei.
You can find the relevant data for this fields in BSEG.
The structure I_BSEGC should be filled with data you think appropriate. I didn't tested it, but i think the first fields are sufficient.
Then, add lines (1 for each field you wish to change) in table T_ACCCHG.
However, you should notice that you're not allowed to change all fields. For instance, KKBER is one of the fields that is forbidden to change in this FM.
Hope that helps.
Rui Delca Mendes

How to change query navigational state in broadcast setting

Dear experts,
I have a question information broadcasting in BW 3.5
We have the following usage of broadcast settings
- open query with bex web
- add special filters, drill-downs etc.
- add this as a new broadcast setting with Mail recipients etc. - the format is "html-file"
- schedule the setting
This works fine.
But, if I have to make changes to the navigational state (e.g. set additional filter) of the broadcasted query for the future - how can I do that?
How can I open the "view" behind the setting directly?
Best wishes
Gregor

I have not found a solution yet but currently I have a workaround:
Before switching to Broadcaster I generate a bex-web-bookmark.
Then i add this bookmark in the text of the broadcasting seeting.
Gregor

Can not change data in Input Ready Query

All,
I have created an input ready query on an aggreagation level which has one transactional cube underlying it however, after run the query I am unable to change data in the cells even though I get a warning message saying query is ready for input
Note:
1. The underlying realtime cube is in "Planning Mode:Loading not allowed" state in rsa1
2. I tried including all characteristics so that the record can be uniquely identified at that aggregation level).
3. I am not using any characteristic restrictions
4. I have not set any data slices
5. I have set the property for Planning "Start query in Change Mode"
6. I have set the 'Key Figure' Planning Properties to "Can be changed Manually or via Planning Functions" for the key figures
7. I do not have currency/unit in row/column.
8. There are any locks occurring
Any pointers welcome.
Thanks,
Milind

Hi Milind,
Was wondering how was your problem solved. I get the same message when I run the query in web from query designer and in bex analyzer the cells are not updated with the changes that I make.
I am hitting my head against the wall to figure what could be the problem as my plan query is simply based on aggregation level created directlty upon the real time info cube.
Have cross checked all the points that you mentioned in this post but I cells do not change.
There should be some way around to solve this problem.
Thanks

Cane Be Changed with Query Navigation

Similar Messages

Maybe you are looking for