Cange chord strips for smart guitar

Hi, I am looking to change the selection of chords in the smart guitar, but idot know how. I would like to add an A Minor. Can anyone help me configure the chord strips?
Thanks,
Michael

Thanks guys, I reported it to apple.
It's even more unpredictable though. It seems to me that on a key change the auto strum buttons play the correct chord (not being a musican I am not sure if this is even true, and now I certainly don't trust what it says).
It seems to me that it's the strings that don't get updated properly. Some do, some don't, some do after playing a different chord or playing the chord with the chord button.
Example, between the key of C major and C minor as. before you have a G and a Gm chord.
Play the chord and strum it in C major and it should sound the same.
Change to C minor and without playing any other note or chord, strum Gm... it's still playing G, wrong.
Now strum any other chord and then strum Gm again.,.Now it has suddenly corrected and does play Gm.
As a quick test I changed key to D (major or minor I can't remember) and practically every single strummed chord is wrong.
All I can say is Apples test procedures are woefully inadequate. This is an embarrassment.

Similar Messages

Smart Guitar help...

Wondering if it's possible to get different guitar pedals/FX for Smart Guitar in GB app for iPad
The only reason I ask is because I saw a couple youtube videos where people were playing familiar tunes and riffs on SG (AC/DC, GnR...) and they sounded almost spot-on to the actual guitar sounds that are naturally in the riffs.
Naturally, they may have had the iPad output going through an external unit for the modulation, but nonetheless it would seem possible to add "in-app" purchases for such pedals and I'm wondering if this exists.

This is the limitation in GarageBand for iPad. You can use (import) different effects, regardelss if there are stompboxes, amps or synth. You only can work with the parameters of the provded effects and sounds.
If you think about how difficult it is just to get audio files and Apple Loops into the iPad, imagine dealing with external plugins. May in the future with iOS12.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Smart guitar chord bug with key change??

I think there is a bug in the smart guitar chord selection when changing the song key.
Could someone try this...
Song key set to C major.
Select smart guitar and strum the strings of the Em chord. Now hit the Em chord button to auto strum... sounds the same. So far so good.
Now change song key to C minor.
Do the same for the now Eb chord.. when strumming the strings it still sounds an Em. But notice hitting the chord button plays Eb.
Does anyone else hear this? (it's not only that chord that is wrong)

Thanks guys, I reported it to apple.
It's even more unpredictable though. It seems to me that on a key change the auto strum buttons play the correct chord (not being a musican I am not sure if this is even true, and now I certainly don't trust what it says).
It seems to me that it's the strings that don't get updated properly. Some do, some don't, some do after playing a different chord or playing the chord with the chord button.
Example, between the key of C major and C minor as. before you have a G and a Gm chord.
Play the chord and strum it in C major and it should sound the same.
Change to C minor and without playing any other note or chord, strum Gm... it's still playing G, wrong.
Now strum any other chord and then strum Gm again.,.Now it has suddenly corrected and does play Gm.
As a quick test I changed key to D (major or minor I can't remember) and practically every single strummed chord is wrong.
All I can say is Apples test procedures are woefully inadequate. This is an embarrassment.

How do you add 7 chords to smart guitar chord patterns

Trying to create a song with G7 chords. How do you add the V7 chord in the chord patterns on the smart guitar in GB iPad?

When you are in the smart guitar screen, tap on the wrench icon (top right). Choose "Edit Chords". Tap the chord on the guitar you want to edit and swipe the chord "wheels" to choose the tonality, etc.

Customize Chord Choice/List on Smart Guitar

Hi,
I'm a newbie on garageband and like to find out if there's a way of customizing "realtime" or "pre-determined" the Chord choices:
For instance, under the key C major, the only choices available from the list are as follows:
Em Am Dm G C F Bb Bdim
In some songs that I want to play, I want to turn the chor Em to E - Can I do that on the fly or at least reprogram the chord list?
thanks.

There don't seem to be any options to reprogram the chord lists. Drop a line to GarageBand for iPad feedback and suggest an enhancement...
tt2

What are the notes of the Smart Guitar?

When I open iOS GarageBand's Smart Guitar on Key C-Major, what are the notes I'm seeing? For instance, what are the notes when I tap the C chord string from 1 (bottom) to 6 (up)?
My actual goal is to record all string tap sounds, cut them into respective pieces in Audacity, then save them as e.g. "C.wav", for further use in another context. I like how GarageBand lays out the chords so my small (noncommercial) program aims to copy this, albeit I'm not a professional musician (as you can see from my question, I'm sure!).
Thanks!

1. Keeping track of the individual conversations taking place between applications on the source and destinations on the source and destination hosts. 2. Segmenting data and adding a header to identify and manage each segment. 3. Using the header information to reassemble the segments into applications data. 4. Passing the assembled data to the correct applications.

Playback of a Smart guitar recording track skips some notes.

I recorded a track using the Smart guitar in Garageband on my iPad2 and recorded a track of 130 bars. The recording was smooth and I could hear all chords and strings play well. However, when i play my recording, it skips several notes in between and I only hear broken audio. When I slide the track bar behind on the piece of track which skipped the notes, and play again, the recorded notes sound correct. Am I doing something wrong or is this an issue?

I have GarageBand on my iPad 2 and there are no latency problems with Smart Guitar during recording. I've encountered the problem only on the iPhone 4s. If I'm not mistaken, the iPad 2 and iPhone 4s have identical RAM amounts and identical processors, so I'm not sure what the problem is. Perhaps the software is not adequately optimized for the iPhone. I hope the GarageBand engineers are monitoring these forums....

How do you use only one plugin in Logic for multiple guitar tracks? I want to only use one instance of Pod Farm and run all my guitar tracks through that one instance.

I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.

What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos

How to define variable for smart form in coding

hi all,
i have to create a variable for smart form which is i already created in smart form but facing some sort of difficulties.
for example:
DATA: formname TYPE ZCCCL_GOODS_RECEIPT.(SMART FORM NAME)
DATA: formname TYPE ZCCL_RETURN_VENDOR. (SMART FORM NAME)
DATA: formname TYPE ZCCL_GOODS_RESERVATION.(SMART FORM NAME)
CASE in_mseg-bwart.
WHEN '101' or '105' or '321'.
formname = 'FORM_RECEIPT'.
WHEN '122' or '124'.
formname = 'FORM_RETURN_VENDOR'.
WHEN '201' or '261'.
formname = 'FORM_GOODS_RESERVATION'.
ENDCASE.
So this the logic im using but it gave me error like:
Type ZCCCL_GOODS_RECEIPT is unknown.
Kindly tell me if this coding is wrong than what should i use.
Thanks.

Declare variable name for smartform as
Formname type TDSFNAME in import tab.

Is there a way to display played chord names for software instruments in the new Garageband?

I know this was possible in previous versions, and displays by default in Logic, but can the new Garageband show chord names for MIDI inputs on software instruments?

No, you cannot list the files from the res folder. You could just put a textfile with all the image names in the res folder, and read the images file names from there..

Is there or can Microsoft develop a app for smart TVs so you can stream from Windows Media Center

I have used Windows Media Center for years to record TV programs and have even sertup my kids Xbox 360 as an extender. I've recently purchased a smart TV which allows me to steam music and home videoes from Windows media player but ofcourse the .wtv
files will not play. Would it be possible to develop an app for Smart TVs and other devices so they can be used as extenders. I'm sure many people would be willing to pay for the app. I've tried some 3rd party extenders and not been
happy with there performance and I'd like to not need another box and remote. I'm sure these new TVs have the ability to do it will microsoft allow them too?

Hi,
I agree with S.Sengupta.
You may contact the support of the smart TVs and request a tool to match Windows media player.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Tree control tip strip for each item

In tree control is possible set a Tip strip for each item (node) of tree?
In tree control tipStrip property seems relative to all tree.
Thanks all.

The only thing I can think of is to use an event structure
use a mouse move event
Get Cords
Calculate what item the mouse is over
Use a Tips property node to write the correct string.
The hard part will be calculating what item the mouse is over, The Displayed Items property node should help.
I am actively working on a program that is centered around a tree control and might like to do the same.
If you need further help reply back
Omar

What can I do about paying for Office from a commercial store, and itunes charging $100 for smart converter, ms office package and pack for ms office $41.99? It surely looks like double dipping

Hi folks, I am puzzled when looking at my itunes account. I bought a store office 365 package for $100, and in the process of installing it, somehow ended up with fees for smart converter, ms office package and pack for ms office, totalling another $90 from itunes. Isn't this double dipping and if so, how do I go about a refund? Thanks jby

Well, MS Office 2004 is available for the Mac and being a user of both the Windows and Mac versions, I think that the Mac version has a slight edge. The only downside is that it does not come with MS Access so if you use that then you have to stay with the PC version.
But... if you are set on mainly using Windows then paying a substantial premium just for a computer that looks good rather than on the fact that it runs OSX and hence great packages such as iLife etc is probably a waste. This is especially true when you have to remember that Apple will not give any technical support to users running Windows.. nil, nada, nowt! Likewise, Microshaft (sorry Microsoft) also seem unwilling to give support at this time since (for some strange reason) they don't like the idea of Windows on a Mac.
As I see it, the main reason for Apple to release the ability to run Windows was to:
a> Produce an 'official' version rather than have an unauthorised version 'in the field' which if problematic, could give Apple a bad name.
b> Give people who would like to have a Mac but have the occassional program which has to be run under Windows, the ability to switch to a Mac.
Option b was the reason why I switched from years on a PC to the Mac.

SAP Vendor Master Communication Details for SMART FORM Printing.

Hi
Could you please advice Functional module to extract SAP Vendor Master Communication Details for SMART FORM Printing.
Thanks in Advance.
Regards
Ravi

Hi Ravi,
I don't know about a function module, but the vendor master table LFA1 has a field ADRNR pointing to the general address table with the fields for e.g. language and to the tables ADR2 for phone numbers, ADR3 for fax numbers and ADR6 for e-mail addresses.
BR
Raf

Multiple HANA systems connection for Smart Business Fiori Apps

Hi Experts,
I could configure and run standard Fiori apps through launchpad and able to configure all type of Fiori apps through web dispature and single HANA system1 [retail]
As per the recommendation from SAP, we have separate HANA system2 for finance.
Now here is the tricky part.
I have added HANA system2 in web dispature. Also I have the trusted connection in my front end gateway server for transactional apps.
Transactional apps from HANA system2 db is working fine. Now, I would like to configure Finance related Analytical apps from HANA system2 views. For this I am not able to get KPI IDs for evaluation and drill-down configuration.
The path for Smart Business KPI modeler in both the HANA systems are same. Is this causing issue to bring KPI IDs and HANA views into modeler?
How to get both views in single KPI modeler tool to configure the KPI tiles?
Please let me know how to proceed?
Thanks!
Praveen.

Johannes
There is some problem with the link
See this.
Connecting multiple SAP Systems
Thread name is 'Connecting multiple SAP Systems'
Krishna Murthy

Cange chord strips for smart guitar

Similar Messages

Maybe you are looking for