Cann't open a *.fmb file (with the same version of Form Builder)

Hello everybody,
My Form Builder 6.0 cann't open a *.fmb file, created with the same version, even with the same Form Builder tool.
I worked for long time ago at this module, I saved it many times, I compiled it and it worked very well. But last time it didn't want to work(open). I couldn't open it (FRM-10043: Cannot open file). But the corresponding *.fmx file is working.
Here is some additional information:
When I try to rename or replace this file an Windows "There has been a sharing violation. The source or destination file may be in use" error appear. But that file is not in use and it is not shared. Is this helpfull?
Is there something which can be done?
Thanks in advance,
Euge

Sure. I did that many times. I checked the volume for the errors. I interrupted any share connection. I tried to change the extension of the file and to change it again to *.fmb(I did this on a copy of that file).

Similar Messages

How do I open Pages '08 files with the current version of Pages (5.5)?

I have a computer full of Pages '08 files. I just upgraded to Yosemite and purchased the new Pages. It looks great but Pages is telling me that it doesn't open Pages '08 files. Apparently it only opens it's own files and Pages '09 files. As far as I know, Pages '09 is no longer available. Am I stuck at a dead end? Is there no way for me to access any of my documents?!
Help!!!

You should still have Pages '08 in your Applications/iWork folder.
Open your files with that and Export to Word .doc/docx. Pages 5.5 can open those with probably considerable changes.
rogerfromnorfolk is right. Take a lesson from this as Apple will continue to screw over your work without regard for its affect on you or all the people who have to work with you.
Start looking for something else more secure and reliable, that means NOT from Apple.
LibreOffice [free] is very capable. There are also NisusWriter and Mellel with more alternatives on their way. Affinity Publisher from Serif should be launched next year and should maybe end any need to use Apple's btroken software.
Peter

How do I open a acsm file with the newest version of Adobe Digital Editions

I purchased an ebook that was delivered in the the Adobe .acsm format. When I downloaded it, I specified that the Adobe Digital Editions as the app to open the file. ADE launched, loaded my old books but the new book was not loaded. I also tried to load the book from the ADE, but the book shows up as a grayed out item that I cannot select. I am running the book reader on a Mac running OS X 10.5.8 and have downloaded the lastest version of the ADE. Has anyone else had a similar problem? Thanks, Yvonne

I'm having the same problem. I have the latest Adobe Reader version, have Mac OS X 10.6.4, and I cannot open any .acsm file-old or new. I've also tried to load the book from the ADE, but the book shows up as a grayed out item that I cannot select. I've tried everything, but to no avail. I don't have any solutions, but wanted to let you know you're not alone in this problem.

An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to ad

An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
Did somebody get the same problem?

It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
That the report generator outputs to an old-old version of PDF bears this out.
Wiki articles on PDF are very nice for those high level intro summaries.
To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
You can change the email2fax application to one that can deal with older PDF versions.
You can change the report generator to one that can output to the ISO Standard.
(Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
Be well...

How to open a file with the same name?

Hi, now I practicing making web pages where I put sample codes in one directory and I copy them to edit.
The probrem is, I couldn't open one file while I'm opening another file with the same name.
Is it possible to open a file with the same name in Dreamweaver?

That could be a very error prone practice.
May I suggest you take advantage of DW "Snippets" feature instead.
Simply save any blocks of code you will reuse regularly as snippets,
and give each one a descriptive name you like.
Then you can simply place your cursor in code view where you wish the code,
and click insert on the selected item from the snippet panel.

Opening 2 PDF's with the same file name

I have someone who has difficulty opening two PDF's with the same file name. They had a file open, then try to open another PDF document with the same file name as the original document, however it will not open (and no error displays) and reverts back to the "old" document. Any ideas?

Are this diferent documents? What version of Adobe Reader?

How to open a new tab with the same current directory in a terminal?

I use the following script to open a new terminal with the same pwd.
I'm wondering how to modify it to open a new tab with the same pwd.
#!/bin/sh
# Open a new terminal in the cwd
CWD=`pwd`
osascript<<END
set thePath to "$CWD"
set myPath to (POSIX file thePath as alias)
try
tell application "Terminal"
activate
do script with command "cd \"" & thePath & "\""
end tell
end try
END

bit of a hack, but the make command doesn't seem to work for tabs in terminal. replace what's currently in the 'try' block with this code:
tell application "Terminal" to activate
tell application "System Events"
tell process "Terminal"
keystroke "t" using command down
end tell
end tell
tell application "Terminal"
do script "cd " & (quoted form of thePath) in last tab of window 1
end tell

How can I overwrite a file with the same name in Content DB?

Hi All,
In Content DB if I upload a file with the same name as a previous one, the application shows the warning message:
" ...You cannot upload "XXXXXX.doc" to "Test 1" because an item with the same name already exists ..."
And the alternatives are "Create Version" or "Cancel" the operation. Is there any way to overwrite a previous file as we can do it in Oracle Files ?
Regards
Harvey

Hi All,
Can anybody from the Content DB product development answer this question?
Regards
Harvey

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

How do you open a psd file in the trial version of Photoshop?

How do y ou open a psd file in the trial version of Photoshop? I'm trying to import it from my file pictures or desk top.

Hi,
File>Open from within photoshop is the most basic way.

Ability to process several raw files with the same content but with different exposure into the single picture

Can you add to the Lightroom an ability to process several raw files with the same content but with different exposure into the single picture?
Base raw files can be given with exposure bracketing during shooting, for example.
The goal - to get maximum details in darks and lights (if we use the "ligths recovery" or "fill lights" we lose the quality because raw file just have no all required information).
The similar (but not the same, only the idea) thing - is High Dynamic Range Photography in Adobe Photoshop
Thank you

The plugin LR/Enfuse does this already. And of course Photomatix have a plugin available for Lightroom. This essentially amounts to pixel editing, which is beyond the range of Lightroom's metadata editing.

How can I open a new window with the same website like the one I have open?

In safari I can open a new window with the same website like the one I have open, that makes it easy continuing to navigate on a website and to go back to the original website

Hello Andieas
Why open a new window for fast browsing??
Open new tabs.
Just right click on what you want to open and click "Open in new Tab"
It is easy and doesn't consume memory from your computer as well as easy to navigate.
Hope you'll like it

For each loop in case of more file with the same name

Hi, guys how works ForEachLoop in case of double file? Let's say that we got five excel file. A.xls, B.xls, C.xls, D.xls, A.xls. We got two file with A.xls. I'm going to assume that both file will be loaded. It's correct?
I'm asking this because I need to check if I got two file with the same name ( I got hundreds of file to load). And in the same time I need to avoid to load two file with the same title ( cause I could double the data)

If there are duplicate file names in subfolders then you should fill the variable with the complete path. See C in this images:
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

The same file with the same name need to call two RFC's with the sequence

i have to pick up the same file with the same name and call the two RFC in sequence
scenario.i have xxx.txt file.file should be proces first calling the first rfc .
I created two different communication channels
for the first sender file communication channel i should not use processing mode archive,delete,Test
and only option is set read only.
if i set the read only the file ..then i can not use the same file again to call second RFC.
how we can acheive the above scenario?
Regards,
Hyma

If you want to file need to be picked up twice in same folder, it seems it is hard for PI adapter to achieve it, you should look for API's that control adapters availibility.
But if you have different folder, then it make your scenario simpler since you can process first time, then output to another folder, configure another adapter to pick up from different folder.
Regards
Liang

How do I make Applescript to compress 2 filez with the same name?

Hello guys and thank you for reading this!
I don't know a lot about programming, but i believe applescript can save my life. What I need is.
Detecting 2 files with the same name, but differnt extension. (song 1.jpg, song 1.mp3)
Compressing those 2 files into a single .zip (In the end I would have song 1.jpg, song 1.mp3 and song 1.zip
And that's it! I know its pretty simple, and I've seen the "Create Archive" in automator, but I don't really know how to tell him which files to Compress.
Thanks again!

Hi,
Try this script :
set sourceFolder to choose folder
tell application "System Events"
      {name, name extension} of (files of sourceFolder whose name extension is not "zip")
      my compress2FilesSameName(the result, sourceFolder as string)
      repeat with i in (get folders of sourceFolder) --check in subfolders
            {name, name extension} of (files of i whose name extension is not "zip")
            my compress2FilesSameName(the result, path of i)
      end repeat
end tell
on compress2FilesSameName(tList, tFolder)
      set tnames to item 1 of tList
      set tExtensions to item 2 of tList
      set tc to count tnames
      set j to 1
      repeat while j < tc
            tell (item j of tExtensions) to if it is not missing value or it is not "" then
                  set n1 to (count) + 2
            else
                  set n1 to 1
            end if
            tell (item (j + 1) of tExtensions) to if it is not missing value or it is not "" then
                  set n2 to (count) + 2
            else
                  set n2 to 1
            end if
            set name1 to item j of tnames
            set name2 to item (j + 1) of tnames
            if (text 1 thru -n1 of name1) = (text 1 thru -n2 of name2) then -- same name
                  set tFile1 to quoted form of POSIX path of (tFolder & name1)
                  set tFile2 to quoted form of POSIX path of (tFolder & name2)
                  set zipFile to quoted form of POSIX path of (tFolder & (text 1 thru -n1 of name1) & ".zip")
                  do shell script "/usr/bin/zip -j " & zipFile & " " & tFile1 & " " & tFile2
                  set j to j + 2
            else
                  set j to j + 1
            end if
      end repeat
end compress2FilesSameName
if an archive already exists with the same name (in the parent folder of the files to compress) , the ZIP command overwrite this ".zip" file.
Example with "song 1.jpg", "song 1.mp3" and "song 1.zip" :
If "song 1.zip" doesn't exist, the ZIP command create the "song 1.zip" file.
If "song 1.zip" exist, the ZIP command overwrite the "song 1.zip" file (it will not create a new archive).

Cann't open a *.fmb file (with the same version of Form Builder)

Similar Messages

Maybe you are looking for