Cannaot boot with DVD os 10.4.6

Hi, i'v forget my password and try to reset it, Put DVD OS x, Hold C key but the DVD drive lights on few second and nothing appen. I format the drive with windows to wipe everthing, put back drive in Mac, try again with DVD: same thing appenned Plus a screen with few lines of text : Kernel and that and that...& that big box saying: You must reboot (in 6 language). I never seen the Utility windows while pressing C key with DVD & reset button. How can I re-install OS X ? My Keyboard is a Windows One. Mac G4, 512 meg, 30gig HD, DVD-RW, PC mouse wheel 2 buttons.

There are two basic versions of 10.4.6 & beyond: one for PPC Macs & one for Intel ones. AFAIK, there is as yet no retail version for the Intel Macs -- you must use the disks that come with them for installing that version of the OS on them.
Gray disk sets come with Macs, PPC or Intel. The retail version of 10.4.x (only for PPC Macs) is black. Typically, gray disk sets include bundled software extras, for instance iLife with most "non-pro" Macs like iMacs, Mac Mini's, etc. These extras are usually well protected against installation on other models; the OS itself may or may not be, depending on the model, OS version, year of release, & so on. If the gray disk allows installation of the OS, it usually will work for other models, as long as they are older ones, released well before the installer release. If the model requires extensions released after the disk's release, it will not work -- it may install OK but the Mac won't boot.
A special case is "drop in" installers, apparently called that because they were dropped into the boxes of some Macs shipped after a new major OS version was released, but before that OS version was installed on production line Macs. IOW, the Mac shipped with an older OS version installed but the (added) drop in installer allowed the user to upgrade to the newer major version for free. These are fairly rare, but seem to show up on eBay & the like with some regularity. They generally do not work with other models.
Important: From a legal standpoint, you are required to have a license for the OS version -- the actual disk is incidental to this requirement in legal terms. A black retail version of the OS always meets this requirement, as long as the previous owner is not still using the license to run the OS on another Mac, whether while in possession of the disk or not. In general, a gray disk set is licensed only for use with the Mac it came with, although at least one reseller sells some of these gray sets with new licenses (included with the purchase) from Apple. Most individuals reselling these disks are not so careful -- if possible, request the original license agreement & software coupons to make sure you are buying the complete product (disk + license to use it).
Note also that your license to use the major OS version that comes with your Mac is for that version only. IOW, if it came with 10.3.x, you have a license to use that version, from whatever source you install it, but not 10.4.x. Conversely, if your Mac came with any version of 10.4, you do hold a license to use it on a single Mac, even if you install it from some other disk.
Disclaimer: I am not a lawyer, nor do I indemnify anyone against any the consequences of any inaccuracies in my interpretation of the license requirements. However, I believe this to be an accurate if simplified version of the licensing terms.

Similar Messages

  • 915PL Neo-V dont boot with DVD

    Hi, i have a big problem.. i need to install a OS Suse Linux with DVD-Rom..
    but my system don't boot ....need's help please!
    boot seguence:
    1 - cdrom
    2 - hardk
    3 - floopy
    what's the solution for this? what i must do? thanks!
    (sorry for my english, i'am brazillian)

    Try this:
    Start your pc and hit F11 when the POST screen shows up;
    After that, you should get a boot menu with all your disks / drives;
    Select the DVD-drive you want to boot from manually.
    Now, it should start from DVD. If it does not, you should see an error.

  • Booting with DVD problem!!! Disk needs repair

    Hello,
    Ran disk utility and I got the «disk needs repair» error. Please boot from install DVD
    Okay no panic I try to do it.
    First try holding C key and with the snow leopard DVD (retail not the one I got with the computer) = failure keeps me on the apple window
    Tried it with the DVD I got with the macbook pro while holding the C key again = faileure keeps me on the apple window
    The computer works fine except it tends to bog down
    I'm running lion and my macbook pro is less than a year old
    I also have Norton antivirus (because YES there are viruses again - anyway norton told me there were when I scanned my HD a while back -). I tried disabling it totally and tried the same things but to no avail...
    Can anyone help? Have I overlooked something obvious? Or is somehting more complicated necessary?
    Thanks in advance

    If you've installed Lion, the 10.6 disk won't help you. You need to hold down Command-R during boot to bring up Lion recovery ... you can then run Disk Utility.
    Oh, and agree with Allan, dump Norton. If you want an antivirus, install ClamXav from http://www.clamxav.com

  • SOLVED: Why won't Satellite 4090XCDT not boot with DVD-R/W drive?

    Hi,
    as I stated in the other thread which has been closed already, I purchased an used Satellite notebook which would not boot from the 3rd Party DVD-RW drive (Quanta Storage SDW-042) included, even though Windows could it read well enough.
    I found out why, starting with the help of the user replies in the other thread.
    In the user manual there is a description in the capitel about system configuration regarding tconfig, which proved to be a valuable hint: HDD = Primary IDE (1F0H/IRQ14) (...), CD-ROM = Secondary IDE (170H/IRQ15). Compared to my desktop, it seemed to me that both drives should be masters on Cable Nr. 1 and Cable Nr. 2, not like Master and Slave on the same HDD Cable. So, my CD-ROM probably had to be Master.
    Then I researched further into the matter and found out, that there are CD-ROM where cable select choses if they are master or slave. Then I found in
    http://www.dschen.de/laptop_brenner/ a remark that in his Toshiba Satellite Pro 4290, there seemed to be no Cable Select and his notebook expected the CD-ROM (or the DVD drive he wished to use) to be a master.
    Cable select means that Pin 47 is grounded, which he did by applying a drop of solder from Pin 47 to Pin 49, which is besides Pin 47. I tried the same and took apart the DVD drive which was in my Notebook. (My record in taking apart my notebook and mounting everything again correctly now has gone down to 50 minutes). And know what, my Satellite 4090XCDT now can boot from the DVD RW!
    To perform the task I needed a watchmaker's screwdriver to open the DVD RW (three screws, and then you must insert a pin to open the tray and see the plug from the backside), a 12 Volt pin type soldering iron for SMD and I controlled the solder bridge with a stereo microscope, so this task is not trivial. See the mentioned link to find out which pins are bridged (sorry, the website is in german but the Pic is clear: in the upper row of pins, the only you can see, the 2nd and third from the right). And of course with a replacement part "from the scrap", you might grant your notebook a second life but you run a risk, because you can not know what you have, master or slave (by firmware or hardware), broken anyway, cable select - and another website states that they have watched up to 17 firmware variants in exactly the same drive, depending on what notebook it was intended for use.

    Wow, thats really interesting posting, buddy!
    Thank you! :)
    I will save this thread in my Bookmarks.

  • Boot with Leopard DVD Problem

    Hi, I have the new Macbook pro 2011 I7 2.2gz, but now it is slow, so i tryed to  reinstall OS, but when i do this with dvd and when I press "C" to boot it, my Mac make 3 beeps, normaly it is because of RAM, but the strange point it is if I took out DVD of Leopard OS, the macbook starts normaly without 3beeps, it just happen when i try to boot with DVD.
    I already make the Apple test, PRAM Reset, and everything it is OK, so i Dont undersand why i can not boot with dvd os leopard to reinstall Leopard :s
    PS: Sorry for my inglish
    Thanks in advantage.
    Tiago Correia

    Another thing, I dont use my orginal boot DVD, i bought another from apple store, i saw same texts in internet and it said it is impossible to install leopard without your original DVD witch cames with ur box mac

  • Tech Tool Deluxe DVD won't boot with 10.5.6. How to fix volume structure?

    Is it just my newbieness, or is the Tech Tool Deluxe 3.1.2 DVD image not bootable with late 2008 MBP with OS X 10.5.6?
    I installed Tech Tool Deluxe 3.1.2 to Leopard 10.5.6. - ran it and it said I have problems with my volume structures. I followed the download button, gave my serial and downloaded the TTD.dmg image, burned it to DVD with Disk Utility (seems OK, as I can read the disk in OS).
    When I try to boot from the DVD, it just reboots in a while to my OS X (tried with c and opt buttons during start-up. I can choose to boot from DVD with opt, but again it just reboots in a while).
    Apple mentions that this version of TTD is not compatible with Late 2008 models - is booting one of the incompatibilities? If so, fine, but how can I fix my volume structure problems now, that tend to hang my Mac every once in while with big disk operations?
    Thanks for any possible help.

    I had the same problem myself. The TechTool bootable products on DVD won't startup an October 2008 release MacBook or MacBook Pro.
    From the Micromat website:
    Our current bootable products support all PowerPC and Intel Macintosh computers capable
    of running Mac OS X 10.5 or greater, except for:
    • MacBook (October 2008 Release)
    • MacBook Pro (October 2008 Release)
    http://www.micromat.com/index.php?option=content&task=view&id=168

  • Unable to boot with UEFI by bootable windows 8.1 DVD

    Hi guysUnfortunately when I want to install windows with UEFI from bios, there is no choice for choosing boot from DVD, while my DVD is bootable and it is in my DVD Rom. On the other, by changing UEFI to Legacy support, it can recognize my bootable DVD of windows 8.1. I really cant understand what is the problem. Please help to install new windows through UEFI (((((((((Thanks

    I think this is a problem with new laptops (as far as I know), you cannot boot into UEFI using DVD.
    (Try disabling / enabling SecureBoot but I dont think that will help either)
    You can however create a bootable USB and boot into UEFI.

  • MacBook Pro mid 2010, gray screen at start up, boot from dvd not working.

    Backstory:
    I was in the process of installing Windows 7 using boot camp, but I was a little bit low on HD space. So, I deleted the user account that had a ton of stuff, and did some other crap that messed up my hard drive. So my computer just won't boot. It shows a gray screen 24/7, going into safe boot/safe boot + verbose doesn't fix the problem. I tried booting from an OSX Leopard dvd, but it won't work when I hold down C, and when I choose the Mac OS X Install DVD option after holding the option key, when I click the arrow button it freezes and doesn't boot. I have Lion installed, and apple says not to boot with an older version of OSX DVD, but there is no Lion DVD.
    What do I do?
    PS: I'm trying to boot using the DVD so I can reformat my hard drive, trying to do so in Recovery HD doesn't work because it says it 'Can't unmount drive'.

    Rockswim,
    did it do that only once, or does it do that every time you restart it?

  • What happens if i boot with windows an install a new version of windows on mac book pro ?

    I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
    i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
    the main questions are :
    1. does it recognize any of my partition to select for windows installation ?
    2. if no , can i format any partition for new partition during windows installation?
    3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?

    majid khalili wrote:
    I tried to install a windows on my mac book pro but i couldn't because of i don't know different problems which finally in this forum they told me u can not because of my hard disk partitions ( Link to that post) , now i am using vmware but its really slow for windows 8.1 and visual studio .
    Give your previous partition layout, you cannot install Windows via Bootcamp, unless you are willing to give up all your extra partitions and go back to EFI, OS X and RecoveryHD only configuration.
    i have now a question , what happens if i boot with win 8.1 boot able DVD and install a new windows ?
    the main questions are :
    1. does it recognize any of my partition to select for windows installation ?
    2. if no , can i format any partition for new partition during windows installation?
    3. if i could install a windows , who is the boot loader ? windows or mac ? can i still boot to windows or what ?
    1. Windows installer will not work and you will end up with driver issues.
    2. No.
    3. You cannot, but if you could, the Apple Bootmanager would be your Boot Manager/Loader.

  • IMac 24" Aluminium - No way to boot from DVD

    Dear all:
                 Thank you for having this forum fully working.
    My iMac 24" Aluminium (november 2008) can't boot, completely frozen, although all HW are perfectly working.
    I'll try to explain the issue best I can.
    SYMPTOMS
    - Grey screen of death without Apple's logo.
    - No bootable devices detected (either HDD or DVD) by EFI, when you hold ALT (Option) while booting.
    - No way to force boot from DVD.
    CAUSE OF PROBLEMS
    a) HDD has 3 partitions created by DiskUtils:
    /dev/disk0s2= Mac OS(HFS+)
    /dev/disk0s3= Linux DVD Installer (FAT32)
    /dev/disk0s4= User Data(HFS+).
    b) rEFIt installed and fully working on the system ( http://refit.sourceforge.net/ )
    c) Linux DVD installer partition was filled this way:
    dd if=/path/to/linux.iso of=/dev/disk0s3
    As you can see, there are no HW errors at all, everything was perfectly working before dumping the Linux iso into FAT partition.
    TRIALS FOLLOWED (and all its combinations).
    TRIAL 1 - Erasing EFI values on memory.
    Leave the iMac disconnected from power cord a whole night for memories to loose their values.
    http://www.youtube.com/watch?v=JId524890zc.
    TRIAL 2 - Force empty memories during boot.
    CMD+ALT+P+R -> Result OK (reboot)
    CMD+ALT+N+V -> No effect
    CMD+ALT+O+F -> No effect
    http://support.apple.com/kb/ht1533
    TRIAL 3 - Force boot from DVD.
    C while boot -> Read DVD first, but can't boot.
    http://support.apple.com/kb/ht1533
    TRIAL 4 - From Startup Manager, try to boot from DVD.
    ALT (Option) while boot -> See cursor arrow on screen, can't see DVD as boot option.
    a) Try with DVD already inside the unit.
    b) Try to insert DVD once I see the cursor arrow on screen.
    https://discussions.apple.com/thread/1383424?start=0&tstart=0
    TRIAL 5 - Remove RAM memories to reset EFI to factory defaults.
    - Remove all RAM from unit.
    - Boot from DVD (C key hold) -> Unit beeps.
    - Shutdown and fill one bank with memory.
    - Wait 15 minutes for EFI memories values to be deleted.
    - Boot from DVD (C key hold) -> Access DVD first, but no boot.
    TRIAL 6 - Boot from external Mac (Firewire + PC fully working).
    This is the only trial missing before replacing the HDD of the unit... finger crossed.
    http://forums.macrumors.com/showthread.php?t=271975
    IDEAS AND CONCLUSIONS
    - Any more ideas?
    - How is it possible that a SW problem affects the HW in a way that can't be booted from DVD? Somethings is terribly wrong on iMac EFI design... terribly poor stability.

    Dear all:
    Thank you for having this forum fully working.
    My iMac 24" Aluminium (november 2008) can't boot, completely frozen, although all HW are perfectly working.
    I'll try to explain the issue best I can.
    SYMPTOMS
    - After a chime... grey screen of death without Apple's logo.
    - No bootable devices detected (either HDD or DVD), when you hold ALT (Option) while booting.
    - No way to force boot from DVD.
    CAUSE OF PROBLEMS
    a) HDD has 3 partitions created by DiskUtils:
    /dev/disk0s2= Mac OS(HFS+)
    /dev/disk0s3= Linux DVD Installer (FAT32)
    /dev/disk0s4= User Data(HFS+).
    b) rEFIt installed and fully working on the system ( http://refit.sourceforge.net/ )
    c) Linux DVD installer partition was filled this way:
    dd if=/path/to/linux.iso of=/dev/disk0s3
    As you can see, there are no HW errors at all, everything was perfectly working before dumping the Linux iso into FAT partition.
    TEST BED
    In the process of dealing with iMac booting problems I organized a test bed which allow to detect where the booting is failing:
    STAGE 0 - Setting initial boot memory conditions.
    STAGE 1 - Reset NVRAM memory to factory defaults.
    STAGE 2 - Booting from external device.
    STAGE 3 - Reinstall iMac firmware.
    STAGE 4 - Hardware intervention.
    Before running the test bed:
    a) Unplug all devices except USB keyboard (no wireless keyboard, no mouse... you can plug an USB mouse once you see the graphical user interface up and running).
    b) Combination of keys available on booting:
    http://support.apple.com/kb/ht1533
    STAGE 0 - Setting initial boot memory conditions
    This bundle of tests must be executed before any test of next stages.
    TEST 0.1 - Erasing booting memory values.
    Leave the iMac disconnected from all wires (especially power cord) for 15 minutes for memories to loose their values.
    http://www.youtube.com/watch?v=JId524890....
    TEST 0.2- Resetting PRAM memory.
    a) Press Power button
    b) Press CMD+ALT+P+R keys while black screen, before you hear the chime.
    c) Hold these keys until you hear 3 chimes (3 reboots).
    http://support.apple.com/kb/ht1379.
    STAGE 1 - Reset NVRAM memories to factory defaults.
    TEST 1.1 - Validate machine with Apple's Hardware Test.
    => Detect Hardware errors with Apple's Hardware Test
    a) Original Apple's Installation DVD on the machine
    Installation DVD should show something like this
    DISC 1
    Mac OS version 10.5.4
    AHT version 3A152
    Disc version 1.1
    2Z691-6304-A
    To use Apple Hardware Test, hold down the D key as the computer starts up.
    b) Holding Down D key as the computer starts up
    http://support.apple.com/kb/HT1509.
    => Hardware OK: continue with Stages 1, 2 and 3
    => Hardware Failure: jump to Stage 4 (skip Stages 1, 2 and 3)
    => Unable to run Apple's Hardware Test: jump to Stage 3, firmware restoration
    TEST 1.2 - Change RAM Configuration: amount or disposition.
    a) Open RAM Slot
    b) Extract RAM stick from Slot.
    c) If you only have one RAM stick, reintroduce it in the unused empty slot of memory.
    TEST 1.3 - Resetting PRAM memory.
    Please check TEST 0.2
    STAGE 2 - Booting from external device
    TEST 2.1 - Boot from DVD.
    a) Introduce Apple's Mac OS original DVD on the unit.
    b) Run Test 0.1 and Test 0.2
    => Force DVD as Booting Device.
    c) Press power button.
    d) Press C key while black screen, before you hear the chime.
    e) Keep hold the C key until you see the MacOS installer window.
    http://support.apple.com/kb/ht1533
    => If still no boot from DVD: StartUp Manager with DVD inside the machine.
    c) Keep hold Power Button 10 seconds to reboot the machine.
    d) Press ALT key while black screen, before you hear the chime.
    e) Keep hold the ALT key until you see the StartUp Manager.
    f) From StartUp Manager, choose DVD as booting option.
    https://discussions.apple.com/thread/138...
    => If still no boot from DVD: StartUp Manager without DVD inside the machine.
    c) Keep hold Power Button 10 seconds to reboot the machine.
    d) Press F12 key while black screen, before you hear the chime.
    e) Keep hold the F12 key until DVD is spelled from the iMac.
    f) Run StartUp Manager again (see steps above) .
    g) Insert Apple's Mac OS DVD on machine while StarUp Manager is running.
    h) From StartUp Manager, choose DVD as booting option.
    https://discussions.apple.com/thread/138...
    TEST 2.2 - Firewire cable and Target Mode: run installer from external Mac.
    http://forums.macrumors.com/showthread.p...
    TEST 2.3 - Remote Installation.
    You can run this test twice: remote installation from PC and MAC.
    => Remote Installation Server on PC/MAC:
    a) Mac OS DVD on PC/MAC optical drive
    b) Install Network Client (just run setup.exe from DVD and follow the steps until everything is installed).
    c) Keep open a window saying... machine is ready for Remote Install.
    => Physical Direct Network Connection between Remote Installation Server and iMac
    a) Unplug power cord from iMac for 15 minutes.
    b) Connect to the Server Machine this way:
    Option 1.- Crossover Ethernet wire direct connection,
    Option 2.- Using an Ethernet switch with no additional devices plugged to the switch.
    => StartUp Manager on Client
    a) Run Test 0.1 and Test 0.2
    b) Press power button.
    c) Press ALT key while black screen, before you hear the chime.
    d) Keep hold the ALT key until you see the StartUp Manager.
    e) From StartUp Manager, choose NetInstall as booting option.
    http://support.apple.com/kb/PH6450
    TEST 2.4 - NetInstall.
    => Prepare NetInstall Mac OS NetBoot Server
    Option 1 - Using Mac OS X Server
    http://support.apple.com/kb/HT4178
    Option 2 - Using Linux Server
    https://docs.math.osu.edu/linux/how-tos/...
    => Force Boot from the Network
    a) Run Test 0.1 and Test 0.2
    b) Press Power Button.
    c) Press N key while black screen, before you hear the chime.
    d) Keep hold the N key until you see the Mac OS X Installation screen.
    => If no NetBoot after 15 minutes: NetBoot from StartUp Manager
    a) Keep hold Power Button 10 seconds to reboot the machine.
    b) Press ALT key while black screen, before you hear the chime.
    c) Keep hold the ALT key until you see the StartUp Manager.
    d) From StartUp Manager, choose NetInstall as booting option.
    TEST 2.5 - Apple's Mac OS Installer/Reparation from External USB HardDrive.
    Very unlikely to work.
    => Create Bootable OS X USB device
    a) Format HDD with GUID partition.
    http://support.apple.com/kb/PH7247
    b) Fill the partition with the Mac OS X installer (only the version your iMac came with, no newer, no older).
    => Boot iMac from USB device
    http://support.apple.com/kb/HT1948
    STAGE 3 - Reinstall/Repair iMac Firmware
    TEST 3.1 - Using Firmware Reinstallation CD.
    a) Download and burn Firmware Restoration CD for your iMac
    iMac 8,1: http://support.apple.com/kb/TA24012
    b) From power off state, press the power button and continue to hold it down until the "Sleep" LED blinks rapidly three times, then slowly three times, then rapidly three more times... this could be chimes, instead of LED blinks! Keep the power button pressed down.
    c) Insert the Firmware Restoration CD you have burned into the iMac's CD drive, then release the power button.
    d) Monitor the "Progress Bar" beneath the Apple logo as the restoration process updates your iMac's firmware, taking care not to disconnect the power, shut down your computer or restart your computer (otherwise, you will have to start over). The iMac will restart automatically once the firmware restoration is complete.
    TEST 3.2 - Using Apple's Propietary  Software.
    Contact Apple's Technical Support to know the price.
    STAGE 4 - Hardware Intervention
    TEST 4.1 - Replace the faulty Hardware on your own.
    a) To detect faulty Hardware, please run Test 1.1
    b) Replace the Hardware following those instructions:
    http://www.youtube.com/watch?v=3w6E2_Xqa...
    TEST 4.2 - Contact Apple's Technical Support.

  • Mac Mini won't boot from dvd

    I just picked up a used Mac Mini and the previous owner didn't wipe the hard drive. He did include the original install disks in the package, though. I inserted the install disk & it says that OS X Tiger can't be installed on the mini (currently it is running Snow Leopard 10.6.8). I tried to boot from DVD but if I hold down the c key, nothing happens and it boots to the HD like normal. If I hold down the option key, the only boot option shown is the HD. I don't get any request for a password, so this mini doesn't appear to have a firmware password set. The DVD drive appears to be functioning fine since it can read the DVD - I just can't boot from it. If I use the Startup disk utility the only option shown once again is the HD. I even tried upgrading to Mavericks, but get an error message that it can't be installed on this mini (I checked the requirements and this machine meets them - running 10.6.8, at least 2 Gig ram, 1.83 GHz Core 2 duo, 60 Gigs free space on the drive.......
    I want to do a clean install but am at a loss on how to do so. Any suggestions?

    I inserted the install disk & it says that OS X Tiger can't be installed on the mini (currently it is running Snow Leopard 10.6.8).
    You can't install an older version of OS X on top of a newer version. You would have to erase the disk first.
    I tried to boot from DVD but if I hold down the c key, nothing happens and it boots to the HD like normal.
    Make sure you're using disk# 1 of 2 of the two gray disk set., and that you hold the C key down for enough time, the boot process from the DVD is much slower than from a hard drive. However, since you have Snow Leopard installed now, there is no point in trying to install Tiger, unless he didn't give you his Admin password; you wouldn't be able to add yourself as a new user or delete his user name without knowing the admin password.
    If you did get Tiger installed, then you would have to buy a copy of Snow Leopard on DVD.
    I checked the requirements and this machine meets them - running 10.6.8, at least 2 Gig ram, 1.83 GHz Core 2 duo, 60 Gigs free space on the drive.......
    Those aren't the complete requirements. It has to be an Early 2009 MacMini, Model Identifier number 3.1, to be compatible with Mavericks. Click on the Apple Menu's, "About This Mac," More Information, then System Report, to locate that information.

  • How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.

    How can I install Windows 8.1 using a USB Pen Drive in Late 2011 Macbook Pro with DVD R/W given.
    I have Boot Camp 5.1.2 (497) and there is no option for installing using USB. I have downloaded an image of Windows 8.1 already.
    I can't install using DVD R/W because it's not working.
    Please help me.
    Thank you.

    unlocked by myself
    thanks

  • Reset Password - System does not boot from DVD

    My System: Macbook Pro - 2Ghz Intel Core Duo - OS X - 10.6.8
    Hi everyone,
    i forgot my password. So i want to boot from install DVD to reset the password. Unfortunately my macbook pro does not boot from DVD (10.6.3).
    I press c all the time...but sometimes the macbook pro throws the DVD out...and sometimes nothing happens.
    The DVD drive is working fine...
    Any other idea?
    Thanks in advance.
    Fabian

    So when you boot holding option it shows a padlock with a password field? Is that correct?
    In that case we're talking about the firmware password, which you can't reset via the install disk. There is only one way to do this, I'm not certain if one is allowed to divulge that information publicly - might want to try googling "reset firmware password"

  • KT4AV will not boot with SATA card installed and no SATA drive

    I put a Promise brand SATA II card in a KT4AV motherboard. There is an IDE drive and a DVD drive hooked up to the IDE1 port on the motherboard. That IDE drive has Windows XP Pro SP2 loaded on it.
    If I have a SATA drive plugged into the card, the machine works fine. If I remove the STAT drive and leave the card in, I cannot boot to Windows. If I remove the card, it works fine. The only time there is a problem is when the SATA card is plugged in and there is no drive on the SATA card.
    As one possible solution, I tried to boot to a Windows CD to reload Windows. It will not even allow me to reload from the CD, it says there is a file missing from the CD. If the SATA drive is hooked up, it will work fine on the CD. Also, I tried multiple CDs and they all give the same message. Because it makes a difference whether the SATA drive is connected or not, I do not believe the CD is the problem.
    I have tried looking on Promise's web site for a FAQ or an updated BIOS or for other information about this problem and I found nothing. I have e-mailed them and they did not reply yet.
    There is no reason to think this is the fault of the motherboard, but I wanted to see if anyone had any ideas about this problem. Because of the symptoms, I believe it also cannot be the CPU, memory, PSU, video card, etc. Sorry if that makes this post off topic.

    Quote from: HenryW on 16-March-07, 02:56:44
    Have you tried to disable card in Device Manager when you don't use it? What is the model number of the card you are using?
    It is a SATA 300 TX2, which means that it has two SATA ports and one IDE port. I have never used the IDE port, only one SATA.
    I have never tried to disable it, but I could try, just to see what it did. It sure would be a lot more work to disable and enable it so that isn't a good long term solution. Among other things, it would mean that I would have to boot up in order to remove the SATA drive. Since it won't boot with the drive removed, it will require more planning.
    Will post the results once I have tried. Still no reply from Promise :-(

  • How do I fix my early 2008 mac pro boot hard disk. Lost everything when it crashed hard, can not reinstal via cd/dvd drive... are there any fix get it boot from dvd drive?

    I have an early 2008 MAC PRO Quad Core 3.0ghz processor. 8 Gig of rams, with a 1 Gig memory  Radeon 5770 HD Graphic Card running the latest Version of Snow Leopard OS.  Last week lighting struck the house take out all of my hard drives (4) thank god the surge protector mitigated the mother board from damaged, use the Parted Magic to check out the motherboard and it intact with no damage. I can boot with the Parted-magic and be able surf and post this question to this forums. I replaced a newly formatted hard  drive and trying to installed OS X Mountain Lions to the new drive, but unable to have it boot in my MAC PRO DVD, I get the usual chimes during the booting processed but the screen remain blackout, but able to boot with Parted-Magic to surf the web and access Apple sites/forums.
    I am not well verse in using the Parted_Magic to repair or get my-mac to boot normally so I can reinstall OS X. Any help would appreciated.
    Thank you
    Disabled Veteran. 

    Go to System Profile and look, does it say "MacPro3,1"?
    That is 2008.
    FBDIMM would be 800MHz. Did you use older slower 667MHz in yours?
    You can but take a hit in performance.
    Sounds like MacPro1,1.
    Mac Pro (3.0GHz quad core (dual CPUs) 8GB 667 RAM)
    In 2007 March an 8-core 3GHz did come out 2,1.
    So just to be clear.
    ===========
    It was all working fine a couple of days ago. At the time it randomly shut down I was trying to use Boot Camp to create a Windows 7 area,
    Whenever you want to install Windows, remove all the drives other than the one Windows goes to. And if you use a dedicated drive YOU DO NOT NEED Boot Camp Assist, unless you use XP, which really is limited and crippled (one processor, 1.9GB RAM support).
    And when it freezes, your only choice is to nuke (reformat) and restore or get out that backup CLONE you made before (ie, Step #1 in the Boot Camp Guide).
    Sure that whole NTFS / MBR / GUID could be an issue, but you should just have a blank drive or clone.
    No don't bother Apple, they seem to not have a good sense about Windows on Mac Pro anyway.
    Other than zap pram from cold boot / tried booting with NO drives inside and just 10.6. DVD - should be fine.
    You should be fine iwth Windows 7 DVD and one drive, or even XP.
    Make sure you take your time and reconnect cards etc properly and any cables.
    Booting from OS X DVDs may not work if there is a drive with a totally shot directory or partition table. Put them in FW case and turn on AFTER OS X is booted.
    Why aren't people Cloning as a Backup Strategy
    Carbon Copy Cloner 3.4.2
    How To clone

Maybe you are looking for