Cannnot flash new bios on K9A platinum

i been trying to flash the 1.2 bios over the 1.1 i have on my motherboard using the msi utility in windows but the only thing that happens is that the system just hangs and then i have to reboot. any ideas? thats the only problem thats puzzling me otherwise its an amazing board

Quote from: XanaduServers on 08-November-06, 05:09:52
Create a bootable CD and do it.
I didn't have to use a RAM Drive. I used a single floppy (brand new), boot disked it and copied over the flash.
I have tried with a booable cd, but that did'nt work either. Did you flash from the floppy? I have never used that flashtool so I might have done it wrong. I just followed the steps in the word doc that came along with the bios files.
Quote from: VTwedge on 08-November-06, 06:28:32
got my board 4 days ago from scan.co.uk...there was a website that said the board they were testing had the x wing logo on it too hmmm. bought it from scan.co.uk
Ok, then it's most likley the same board as I got. Strange tough, that the pictres are different. On the box its a picture of an X-Ving tough.

Similar Messages

When is going to be released official new bios for k9a platinum

Hi,
as I write in topic, when is going to be released new bios for k9a platinum?
thanks

That is a Kuma CPU and as such it is not and probably will not be supprted on your older MB.
Here is a list of MBs that support 7550 Kuma, 7750 it appears like is too new to be on any MSI MB CPU support list yet however it it should be supported on them as well.
K9A2 CF, K9AGM3-F, K9A2 Neo-F
K9N2GM-F V2, K9N2 SLI Platinum / K9N2 Zilent, K9N2G Neo
K9A2GM V3, KA790GX, KA780G-M
KA790GX-M, KA780GM-M, KA780GM
K9A Platinum >> CPU support << list

T60 Flash New BIOs freeze

T60 running win xp pro. I downloaded thinkvantage system upgrade and ran it. It froze on "Flash new BIOs". What now?
Solved!
Go to Solution.

flashing a new bios can be risky, if your system isn't stable you can end up destroying your system board. Make sure you have a valid reason for updating the bios, don't do it just because you can, and when you do update it, do it manually not automated. run ONLY the update program with nothing else, not through system update. It would also be wise to disconnect from the net so there is nothing else going on in the background that could cause a crash.
Also make sure you have a constant source of ac power and a fully charged battery.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

MSI 975X Power Up Edition V2.1 Issue Beside Overclocking After Flash New Bios

Hi all,
I hope I can get a lot of help here. I'm having a few issues with this board. I cannot find any thread that discuss other issue beside overclocking after you flash a new bios. Here are my problem:
1. I installed fresh WindowsXP with SP2. Windows cannot detect new usb device eventhough WindowsXP recognized the usb controller. If I plugin any usb device, windows does not detect a new device. I try to stick a USB flash and I can see the light for a few seconds but Windows cannot detect it. Before I upgrade the bios to version 715 (beta), I used usb flash to upgraded it. Now, the bios is not even boot from usb flash.
2. Other things that concern me, the southbridge chipset is really really hot. If you touch it long enough, it will burn you.
3. I cannot figure it out the front audio from manual book (JAUD1). Is any of you know where the mic needs to go?
Thanks

I removed the Big Typhoon from the MB and I replace with stock fan. I want to make sure the back plate from Big Typhoon doesn't cause any problem. When I bootup the windows, I saw WindowsXP recognized the USB device but it disappeared again. I took the MB out from the case and test it without a case. It stills does not recognize the usb. Somebody mention bad PSU(Power Supply Unit) may cause a lot wierd problem. I changed PSU from RaidMax Vocalno 630W to Ultra X-Finity 500W. I don't have a lot of stuff that require power. Do you think the PSU cause this issue?
This is list of my comp:
MSI 975x Platinum PowerUp Edition V2.1
Conroe E6600 Retail
Seagate 300G SATAII
Maxtor 120G IDE 100
Asus 16X DVD-ROM
NEC 3550A DVD-RW
Ultra X-Finity 500W
120 mm Fan
80 mm Fan
Big Typhoon
FYI: USB Controller and USB 2 Controller are enabled in BIOS.

Flashed new bios V1.10 , now Pc wont load past windows loading sceen.HELP

hi i have a neo-f p965, i flashed the bios today to the new update v.1.10. now my pc wont load past the windows loading screen, it just reboots every time.
i want to go back to a older bios version if posible. can anybody help me, this is a disaster if i cannot get it to work.
many thanks
Noel.

Get this.
Select your motherboard. Then click BIOS, download previous version.
Rest is simple.
Or you can stick with the 1.1 BIOS and reinstall Windows.

Cant flash new Bios to my Z68A - GD65 G3

I tried flashing the bios from forum beta thread multiple Times now: E7681IMS.P80
I prepared my stick with the forum flasher tool.
And executed in commandline: efiflash bios.bin
It says invalid ROMID it does not fit your current one.
Mainboard: Z68A-GD65 (MS-7681)
PCB Version: 4.0
BIOS Version: VN.4B7 (aka Version: V23.4B7)
BIOS Date: 16.11.2011
I need to update to get my 780 to work.
Thanks in advance.

Quote
And executed in commandline: efiflash bios.bin
If done right, there is no typing of anything. Please re-read and follow the instructions carefully;
https://forum-en.msi.com/index.php?topic=163866.msg1213416#msg1213416

Flashing new bios,do or not to do?

hi all, i'm new here and i have a problam.
i have p3 with 733 mhz and 256 sdram.
my board doesnt recognize hard disk above 30 giges...
and i want to buy an 80 giges.
is it good flashing my mother board for it?
i use AIDA32 to see the components on my computer
here are the resualts:
Motherboard Properties
Motherboard ID   12/02/1999-692-596-W977-2A6LGM4EC-00
Motherboard Name   MSI MS-6154VA
BIOS Properties
BIOS Type   Award Modular
Award BIOS Type   Award Modular BIOS v4.51PG
Award BIOS Message   W6154VMS V2.1 050500
System BIOS Date   12/02/99
Video BIOS Date   01/12/01
BIOS Manufacturer
Company Name   Phoenix Technologies Ltd.
Product Information   http://www.phoenix.com/en/products/default.htm
Problems & Suggestions
Suggestion   System BIOS is more than 2 years old. Update it if necessary.
Suggestion   Video BIOS is more than 2 years old. Update it if necessary.
what should i do?
do i flash a new motherboard? an ew bios?
from this information i came to this url here in this site
http://www.msi.com.tw/program/search/ser/SerConDownRes.php?keyword=ms-6154&kind=
should i download and install the first one?
help....

i really dont get what your asking
you have bios 2.1
the one after that says
Support HDD size over 65GB
so get the latest w6154va24.exe
you can get a new motherboard if you like,and a new cpu and ddr ram as well

Flashing new BIOS creates CMOS error

Hi,
I have Q200 Desktop.
Yesterday, I checked for the new updates from Lenovo. I found out that there is BIOS update 52JY54USA.
I downloaded the flash version and updated. The updation went successfully without errors.
Trouble started when I rebooted.
During booting my system displayed "CMOS Checksum bad" error. But allowed me to continue to boot into OS.
I tried to update the same BIOS with "Destroy CMOS Checksum" option. There was no improvement.
Eventhough it is not a showstopper I have automated my PC for waking up in midnight and downloading during my Broadband free hours. This will not be possible because I need to press F2 everytime the PC boots and resumes.
By luck I think, I booted into Vista, went to Lenovo website downloaded the CD version of the same BIOS update and burned to a CD. Rebooted and updated the same BIOS update thru CD version.
Now system rebooted and surprise, there is no "CMOS Checksum bad" error.
Now, Is there anyone got this error.
Also is there any reason for this? just a curiosity.
R Balaji

Hi R Balaji,
I don't know what caused your first BIOS update error. But in general, I would recommend always using the bootable CD to update the BIOS, as you ended up doing. Trying to update BIOS from inside Windows is AFAIK far more trouble-prone than using the boot CD.
I'm glad to read that you fixed your problem, congrats.
Best regards,
Frank
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

MOVED: X58 Pro not POST after flashing new bios v7.1

This topic has been moved to BIOS.
https://forum-en.msi.com/index.php?topic=125154.0

Quote
system is rock solid through overnight stress testing at my current speed/timings, so i didnt complain
Yeah, it often happens, that the system runs fine during stress tests, but has problems to boot-up properly when there are memory related problems (initialization problems).
Quote
do you think my memory is defective in some way?
Not necessarely defective. The question is what the native speed/timing ratings of the memory chips look like. Also, DDR3-1066 is actually the max. memory speed that your CPU's memory controller natively supports (according to Intel Specifications). So it is good to start testing here (does not cost anything and is not risky either). If the system starts fine @lower memory clock speeds, we will know more.

BIOS in K9A Platinum v1.6

Can anyone answer this simple question, how do you change the vdimm in this particular board... vdimm is grayed out and I can't enter it, and I've got everything in manual . Is there a trick to openeing the values for vdimm? This is weird...
Debo

Like I said this weird, ain't never messed with controls like that b4, always messed with DFI BIOS, Gigabyte, and ASUS, thnx for the reply...
Debo

K9A Platinum

beta BIOS for K9A Platinum ver V1.7B4:
BIOS Sign-on message: A7280AMS V1.7B4 080207 11:27:35 (Date: 08/02/2007)
Attachment name: K9A Platinum V1.7B4.zip
Make and ensure PC is stable before proceed. flash BIOS from USB key, by using our Tool(easy & safe way to flash):
MSI Forum HQ USB Flashing Tool
Use Beta or Modded BIOSes at own risk!

Quote from: Unknownforce on 14-August-07, 04:35:18
I am curious, what does this change/fix? does it add anything into the BIOS options or anything? perhaps keyboard power on
Thanks
doesn't matter this Beta is a old one... there is newest official version.
about keyboard power on look here:
https://forum-en.msi.com/index.php?topic=105788.0

New BIOS v1.9 for Neo4 Patinum fixes USB 2.0 problems

The biggest ever (look at the filesize of the bios) BIOS for K8N Neo4 Platinum has been released today. Having in mind how dodgy the previous v1.8 was all they say is "Improve compatilbility problem with some USB 2.0 devices". Well I am with v1.6 and I have problem with Smart CPU target - it does nothing - at 40c CPU fan is running at full speed well below 40c. Sometimes when the mobo decides it starts at half speed, goes to full when CPU temp over 40C, but when CPU temp goes back to 37C it still runs the CPU fan at full speed.
TIRED OF FLASHING. MSI FIX ONE THING, RUINS ANOTHER.AND SO ON AND SO ON AND SO ON..................................... ....................

Well I did have some problems with USB 2.0 External drives so my mother board came with BIOS V1.6 I Jumped and upgraded the Bios to V1.9 and men this has been a circus of problems from Unstable to weird Raid messages but the biggest problem is that the system wont turn off the PC or restart???? from wondow the monitor goes black and the pc keeps working???, I did everything posible in the world to fix this problem and nothing
I hope MSI fix this problem there is a lot of people having the same problem this is my first MSI MB and happens when you change from ASUS or ABIT :( crap!
There is something really disturbing if yo go to the main MSI Computer website -> USA the bios goes from V1.5 to v1.8 and if you go to the msi.com.tw they have V1.6 to v1.9??? it will be good that those guys from MSI have the same thing in both places for the same NEO4 platinum MB???
well go back to v1,6 or wait for the new Bios
regards
NEO4 Platinum
AMD 64 4000+ SanDiego
2GB OCZ PC3200 2T Low Latency Dual Channel kit
XFX 7800GT OC 450Mhz
Audigy 2 ZS
Raid 0 2x200GB MAXTOR DM10 SATA2
2X200 MAXTOR DM10 PATA133

What to do with bricked motherboard? MSI P67A-G45 AFTER FLASHING LAST BIOS

I flashed MSI P67A-G45 by the last BIOS for IB CPU. The flashing goes twice with intermediate reset. Before I flashed P67A-C43 by the same version from MSI, and all was Ok.
I flashed new BIOS from version 1I under DOS mode. There was a problem with pen drive and I used hard disk without USB pen drive. That was my error. The exe file started and flashed BIOS normally and then after reset started flashing Intel ME firmware. I thought all is going ok and the image is taken from HDD. But after the process finished and motherboard reset, it didn't start at all. The fan starts and stops, LED blinks and motherboard behaves the same way even without CPU. What can I do? Is there any way, suppose, using a EEPROM writer? I have one and I can take the BIOS chip off and flash by old version of BIOS. What can You advise? Maybe the second flash process writes another chip - can You tell me about it. Please advise how to manage this problem.
I received no help from support. I'm not a novice - I work in repair center and have soldering station etc. Can You explain me anything about second flashing process? I need only information and I will be able to manage th :lol_anim:is problem.

Quote from: ring1956 on 31-July-12, 04:01:53
I flashed MSI P67A-G45 by the last BIOS for IB CPU. The flashing goes twice with intermediate reset. Before I flashed P67A-C43 by the same version from MSI, and all was Ok.
I flashed new BIOS from version 1I under DOS mode.
Why did you flash the C43 BIOS on the G45 mainboard?
http://www.msi.com/product/mb/P67A-C43.html#/?div=BIOS
http://www.msi.com/product/mb/P67A-G45--B3-.html#/?div=BIOS

X220 4286-CTO can't update new bios

I get the new X220 today and want to update the new bios because the "unexpected CPU throttling mode" problem.
But when i using system auto update, it can't found any new bios(my bios is 1.12) for my system.
So i manually download the 1.17bios from the lenovo websit.
but when i install it, it also failed to refresh and indicate as follow:
The process does not recognize this system.
The process has been canceled.
Could anybody tell me what the problem was?
My system is X220 4286-CTO, but i can't find my type on the web selection. And if I use autodetection,it confuse my system as X220i 4286-CTO.
I want to update to new bios.How can i do?
THX!!

hoang0100, my apologies as I haven't understood you clearly...
May be you try flash BIOS via setup after laptop boots?
The BIOS flashing process is simple - just download the BIOS image and Update Utility (in one pack) from Lenovo's web site. Presently the last version of BIOS is 1.17, direct link on US site for your laptop model is here http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS018805.
Download and launch exe file, setup process will start. You'll be promptetd the path where files will be extracted. At the end of installation process you'll be asked to start the flashing process automatically. Close all applications, plug-in AC adapter and start. You'll see the process. Don't do anything on laptop during that process, about one minute. At the end your laptop will be rebooted. That's end. Also you'll get backup copy of your current BIOS, that file has name bios.bak.
Note you can flash new BIOS or re-flash manually by launching winflash.exe.
Cheers
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

New BIOS 2.29-1.08

Hello
Have anyone flashed new bios 2.29-1.08 for ThinkPad T/R 61? The same day (or next) after flashing I got blue screen in Windows 7 (I've never had such a blue screen on my T61)
***Hardware Malfunction
Call your hardware vendor for support
NMI: Parity Check/Memory Parity Error
***The system has halted
I flash back previous version (2.27).
Do you have any experiences with version 2.29?
PS. I tested RAM modules with MemTest and whole system with some tool included in Lenovo Toolbox. Everything was OK.

Recently actually (even after replacing systemboard) I experience problem described here http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-69684
So I don't need to test GPU for several hours. Playing video on youtube/vimeo is enough

Cannnot flash new bios on K9A platinum

Similar Messages

Maybe you are looking for