Cannon printer compatibility

Hi,
I have tried OS X Yosemite 10.10 on my mac book pro 17" early 2012 over last weekend and it was a bit of a disaster. I have been running it on Mavericks till then and had connected several peripherals: Cannon LBP 3500 A3 mono laser printer, Cannon LBP 6000 A4 mono laser printer, Brother A4 colour laser printer, Cannon LIDE 210 A4 USB scanner and Mustek 2400 A3 scanner, plus Dell 23" LED monitor and of course apple keyboard, mouse and track pad. All Cannon peripherals failed to work. I have tried to download latest version of drivers and for LBP 6000 i got version 3.67 but it would not work either. Talking to Cannon rep somewhere in the ether they said no updates for my printers will be available as there is no demand (sic). What a waste they are just 2-3 years old. Muster and Brother units worked well. Also all peripherals are connected via 2 USB2 hubs (pro book has only 2 usb2 ports) which started to play up as well while on Yosemite. Since then i had to reverse to Mavericks thanks to time machine the whole system just rolled back and within 2 hrs all was up and working. Does anyone have any suggestions on what can be done? I would like to upgrade to Yosemite soon. I have noticed some posts on having same problems with Yosemite and cannon lbp 6000 but it does not seem to be resolved yet. And i have fusion 7 with win 7 on book pro too.
Thanks

Thanks, I have checked the Sys Info utility and here is the screen shot of what it showed. I had all peripherals turned on and it shows all 3 printers and cannon scanner but does not show Mustek scanner which is on and works, funny, any explanation? So if i had the other book pro with Yosemite and all peripherals connected and switched on would Sys Info app show me whether all is working? Is there any diagnosis app i could run to check for any problems with USB hubs? I am not sure whether there have been any USB hub problems reported so far with Yosemite.
show

Similar Messages

Cannon printer mp480

I bought my mac pro 3-5 years ago right before the 10.6 update. I ordered a cannon printer mp480 it was free at the time with my mac pro. It sat in the box for a few years, I just opened it a few months ago. Can it be used with the IOS 10.6? I'm reading online where it's not compatable... now i know why they may have been giving them away:)
I can use the copier, but not the scanner or printer. I can't print anything off of the internet or my computer. Please help direct me if you can...
Thank you,
OC103

You could ask Canon. You could check for driver updates at their web site and/or you could install this driver update:
http://support.apple.com/kb/DL899
According to the list of printers supported your is so I don't know where you got your miss-information from.

How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
"The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
Thanks!!

I was able to get it to work using your instructions off of here and your other thread
Thank you!
Chris
http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

How do I make my Cannon Printer MP250work with my new iMac?

Just bought the iMac, and I need to use my old Cannon printer. Plugged it in and the printer is not responding. Is this a device driver issue, software,etc.?

I visited Cannon, downloaded the driver/software for PIXMA MP250 but the printer will not respond when I click print.

Since installing Firefox, my number pad on my laptop & my Cannon printer don't work

Acer aspire5742 G
using Window 7
Cannon printer MX880 series - whether in wifi mode or plugged in to pc get message printer off line.
All plug in properly new cartridges put in properly but cartridge lights are shining.
Thanks Roseskick

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

MG series 5320 Cannon printer, error code 6000 appears, can't get rid of it

Cannon Printer MG5320, Error code appears, can't get rid of it?? can anyone help

Hi ikovach10,
To try and resolve the error, if any object is placed in front of the machine, please remove it. Next, please open the paper output tray gently, then turn the power off and back on. If the error still appears, please turn off the machine, unplug the power cord from the power supply and leave it unplugged for 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing.. Please call or email us using one of the methods on the Contact Us page for servicing options available to you.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My MAC OS X 10.7.5 won't talk to my Cannon Printer MG6120

My MAC OS X 10.7.5 won't talk to my Cannon Printer MG6120?

Perhaps this will help:
http://support.apple.com/kb/HT4670

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Don't know if this went through the first time. Cannon printer would not print black. bought a new Epson-800. Same problem. Can it be something in my Mac causing the problem. It's only the black that is not working.

Bill ...
Believe it or not, might be a font issue > Computer won't print black text in...: Apple Support Communities

Enhanced Point & Print compatibility driver in Windows 7

Hi all,
are admin permission needed to install the enhanced Point & Print compatibility driver in Windows 7? The print server is running Windows 2012R2 and the driver type for the printer is V4.
When a user (non admin) tries to add that printer, a dialog box pops up and asks for trust. Is this the default behaviour?
Many thanks!
Nils

Hi Nils,
Would you please let me know whether add a network printer via
Add a printer wizard, then encounter the issue (ask for trust)? Or do any other operation? Just a confirmation, thanks for your understanding.
Please also refer to following articles and check if can help you.
Printer Sharing Technical Details
Configure Print and Document Services
Assign Delegated Print Administrator and Printer
Permission Settings in Windows Server 2012
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannon printer/scanner image class mf4150

can I install my cannon printer/fax/scanner image class MF4150 to my IMAC OS X Mountain Lion?

Hi Glenn!
I will be glad to assist you.
It appears that one of the buttons on the control panel may be sticking and causing the error. I recommend powering off the machine and unplugging it from the wall. Once the unit is unplugged, press all of the buttons on the control panel, starting left to right, one at a time. Next, plug the machine back in and power it on.
I hope this information is helpful to you. If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Cannot Print Report of Developer 6i CANNON Printer

Hi,
I am having reports of Developer 6i. In the previous, I have those reports in D2K. Now i complied and the report on Developer 6i and run . The reports are displayed but when i ask for print, it prints only the first page. This things appear in the CANNON Printer. But when we go for the HP printer, this problem does resolve.
Pleas give me a solution.
Farhad Islam

in metalink they are reporting similar trouble with CANON printers (LBP-800 and others).
They were able to solve it by applying patch 11
and/or getting latest printer drivers.

How can I print from my ipad air without buying a new "air print" compatable printer?

How can I print from my ipad air without buying a new "air print" compatable printer? I currently have a HP Photosmart plus B210. Can I make that work?

Although you have posted in a Mavericks forum, implying that you have a Mac computer, your profile doesn't say that you have one. Printer Pro requires the printer to be connected to a Mac.

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2) turn it and wifi on on the phone. 3) connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

B200 error on my MP620 cannon printer

i lost my manual and have a B200 error on my MP620 cannon printer and would like to know how to fix it, thx?

Hi kbishop,
To try and resolve the issue, please remove the power cord from the back of the printer and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, the printer will require servicing to resolve the issue.
Please drop us a line by clicking on the Contact Us link to start the process!

Cannon printer compatibility

Similar Messages

Maybe you are looking for