Cannon printer driver wont install

I cant get my cannon d420 image class printer to in install on my new computer running windows 7

Are you running Windows 7 x86 (32bits) or x64 (64bits)?
You should be able to get the drivers from this website: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d420#DriversAndSoftware
Select your operating system (To find it, Open the start menu, Right-Click on My Computer, select Properties. The system Type will tell you if you are 32 or 64 bits)
Select the driver package and download it. For installation instructions, follow the website:
*Precaution When Using a USB Connection
Disconnect the USB cable that connects the device and computer before installing the driver.
Connect the USB cable after installing the driver.
Driver and application software files have been compressed.
The following instructions show you how to download the compressed files and decompress them.
1. To download files, click [I Agree-Begin Download] icon, select [Save], and specify the directory where you want to save the file. Click [Save] to start the file download.
2. Downloaded files are saved in the specified folder in a self-extracting format (.exe format).
3. Double-click the files to decompress them. A new folder will be created in the same folder. The new folder will have the same name as the compressed file.
4. Double-click the decompressed Setup.exe file to start installation.

Similar Messages

  • Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).

    Cannot find m1212nf multifunction printer driver to install on w/2008 terminal server (64bit).  The existing driver wants me to connect the printer using USB.  The printer is in another facility I am trying to support.

    Hi,
    The HP M1212nf used the Host-Based printing language, such printing language is not recommended Citrix or Terminal Services envoirnment and not officially supported.. you may try using the Citrix UPD on the server by installing the basic driver for yor printer on the client:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=3965849&task=&
    (ii) HP does not recommend installing these host-based LaserJet drivers on the Citrix server; however, the devices may function by using the Citrix UPD on the Citrix server with the HP host-based driver installed on the client. Print drivers for your product may be available within the Windows 7 operating system.
    http://support.citrix.com/servlet/KbServlet/download/10498-102-693211/Citrix%20Supported%20HP%20Prin...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problems adding USB printer - "Driver not installed" - but it is

    Apparently, 10.3.9 has some problems with USB printers. For the record, I had already installed this earlier prior to the upgrade and everything worked fine - but due to crashing due to a faulty power supply - I've had to re-configure everything.
    I, and many others in this forum, have found a strange problem when trying to add a printer (And yes, other people have asked about this but I haven't seen any answers at all that are useful. The only possible solution seems to be "upgrade to 10.4" and that is unacceptable. Does Apple check these forums?).
    After clicking "add printer" in the utility, the software finds the correct printer (so obviously the physical connection to the printer is OK) and displays it with a question mark over it's icon and "driver not installed" next to it. I can't select this image or text.
    After searching for a couple of minutes, a dialogue box pops up saying "New drivers detected. Do you want to reload the browser?" (I assume the printer setup utility is the "browser"?).
    I click yes and nothing happens. No PPDs show up in the list. This happens when I select USB as well as Apple Talk from the printer-type pull-down menu.
    How can I start printing again?
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)
    iMac G5 17" Mac OS X (10.3.9)

    First, welcome to the discussions.
    For the record, Apple does not normally respond to these Forums.
    You mention (Due to Crashing) Whenever you have an issue with your machine it can disrupt in almost any area, and is normally caused by SOMETHING.
    As of right now it would appear you might be chasing your tail.
    When you choose to upgrade your Operating System there is No Guarantee that your Printer and it's drivers will work on another completely different Operating System.
    Your best bet at this point is to drag all of your printer related folders to the trash, empty your trash, and plug your USB Printer (What KIND) into your machine directly.
    Shut your machine clear OFF for a minute or so and do the same to your printer, pull the power adapter from it.
    Now plug in your printers Power Adapter, Plug in the USB to your Printer to your computer and restart it.
    Take the Disc that came with your printer and re insert it and download the Installation Folder and any utility folder that may come with it.
    After you have done this don't try to print, Go directly to your Printer Manufactures Web site and search for the latest updates to your printer and the Operating System you are using.
    These will more often than not download to your desktop.
    You must drag these to the setup folder and or the utilities folder and then double click them to launch them. after you have completed this your printer should work.
    One other thing, If you have Classic and or OS9 on your machine you might have to do the same for OS9 Applications , and Utilities for it to print in Classic. Don

  • Adobe PDF converter printer driver not installed: No longer working.

    I recently uninstalled and reinstalled my Epson printer and now my PDF converter isn't working. 
    I'm using Win XP and Adobe CS3 Design Standard. I tried several of the suggestions here on the forums on reinstalling PDF converter driver and or switching ports, but to no avail.

    Problem Solved !!!
    Printer Name: Adobe PDF
    Port: Adobe PDF Local Port
    Advanced: Driver: Adobe PDF Converter
       Spool Print  and Start printing Immediately (Uncheck Send to Printer)
    Once I got the above in place I was then finally able to install as noted below:
    Try adding it manually: These instructions are for Windows 7 but I don't
    think Vista's install varied much, if at all.
    1) Open the Devices and Printers dialog box and select Add a Printer
    2) Add a* Local Printer* at the next dialog box asking what type of printer
    you want to install.
    3. Select* Create  A New Port* at the Choose Printer Port and select* Local
    Port at* the type of port dropdown menu.
    4. Click Next, then at the prompt name the Port "Adobe PDF" or whatever you
    prefer.
    5. Click OK and at the Install Printer Driver dialogue box, click Have
    Disk and browse to *C:\Program Files\Adobe\Acrobat
    10.0\Acrobat\Xtras\AdobePDF* folder and highlight the AdobePDF.inf file.
    Click Open, then OK.
    6.  When presented with a list of Adobe PDF Converter options, select the
    first item from the list and click Next.
    7. Make sure the radio button is selected for Use the driver that is
    currently installed (Recommended) Click Next.
    8. The printer name dialogue box should default to Adobe PDF Converter, if
    not change it to that exact name.
    9. Then click Next through remaining screens to install.
    At this point, the printer should be installed.  Hopefully this helps.

  • Printer Driver wont work after upgrade to 10.6

    I just updated my OS to 10.6.8 (from 10.5x), and my printer driver won't work right. I have a Samsung ML-3051ND. I wasn't able to make double-sided copies, so i downloaded and installed the latest version (supposedly 10.6 friendly) from the Samsung website. Now, whenever I try to print I get an error message saying my printer driver isn't installed correctly, please try again. I did reinstall, following the directions from the Samsung website. Still the same error message. Any suggestions would be much appreciated.

    OK, I found an answer that works on the MacRumors forum.
    In system pref>printer & faxes> on the left side, you should have a list of printers. You need to right click in the white box andreset printing system. This deletes all the printers. Then add theprinter. It worked like a champ after that.

  • Cannot get printer driver to install on Satellite Pro C660

    tried to install epson rx560 printer (windows 7 64-bit) driver on satellite pro c660 but it fails epson told me to consult a technician as the printer driver is fine
    Any help would be gratefully recieved

    I dont think that this is a notebook issue.
    In my opinion you should visit and check the Epson support page:
    http://www.epson.co.uk/Printers-and-All-In-Ones/Inkjet/Epson-Stylus-Photo-RX560/Drivers-Support

  • Windows 7 64bit printer driver wont work

    I have a hp2600dn color laser printer that I have not been able to get to work with my windows 7 64 bit laptop.  I cannot get it to work over the network or using a USB cable with the drivers I can download from HP.  
    HELP!!!

    Hi,
    Go to Hewlett Packard  - Enter the product name / number. Be sure to check the additional information, like how to install the driver or troubleshooting guides. hope this helps you. get more information......... http://www.tomshardware.com/forum/57438-3-deskjet-1280-compatible-printer-driver-windows
    Set peace of mind as your highest goal,and organize your life around it.

  • Fix acrobat 10.1.9 - print driver wont funtion after update

    After the 10.1.9 update in acrobat X. I can no longer print to teh print driver from other applications. It goes to print and then fails with error message in printer que.
    I've tried to reload update but no change. What to do?

    Anoop
    The error message was in the printer que and would just state " Error printing" under status.
    I think I have fixed it for now. I deleted the adobe printer listed another as my default and re ran the update. This created a new printer and I changed it back to my default printer and it has worked a couple of times so far. We'll see how long it lasts.
    This is not the first time I've had an issue like this. The adobe printer has failed several times on me in the past, mostly only failing on occasion until it gets worse to the point of not working. It's frustratng to print something and have nothing happen or maybe it will. I'm wondering now if it has been becuase of an update. Every once in a while my computer will quit printing to the adobe printer and I have to go through a blind man's redo this change that repair until it starts working again for some reason. Mostly in the past I have been able to delete and recreate the printer to get it working again. This time it wouldn't work even after fixing the update, reloading the update, re-running the update. The thing I changed when it did work was to delete the printer and list another printer as my default. When I reran the update it created a new printer that worked??????????
    So far - you are the only help I have found with this issue. I and our IT guy have spent alot of time looking for something on this issue and find nothing. If you have any light to shed on this I would appreciate it.
    Thanks

  • HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

    I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
    Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
    I have tried all the solutions provided on the HP website but none of them worked.
    I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
    If some genius can help me I will pray for him/her that all his/her wishes come true.
    Thanks you in advance.
    Imroz Baig

    I just got my HP Deskjet F2120 working in Windows 7.  Here's how:
    Insert the setup disk in your CD/DVD drive.  Choose to view the files in Explorer.  Scroll down to the file "Setup," which is identified as an application.
    Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
    Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
    ALSO check "Run this program as administrator" at the bottom of the window.
    Press "Apply," then "OK."
    Now you can double-click the "Setup" file and run the software installer.
    It will 100% work inshallah...

  • HP Photosmart c4700 driver wont install on windows 8.1

    I am trying to install my HP Photosmart C4700 All in one printer to my lapton. I have Windows 8.1 and its not letting me install it. Could you Please help me.

    Hi  BellaBaby,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issues when attempting to install the printer on to your Windows 8.1 computer.  If you are connecting the printer to the computer with a USB cable, please make sure the cable is Disconnected while doing the installation.
    Please click on the following link for the HP Photosmart C4700 All-in-One Printer series Full Feature Software and Driver.
    Save the download to your Desktop so that it creates it's own Icon. This will make it easy to find the download. Click on the Icon and follow the instructions. Please do NOT connect the USB cable until the installation prompts you to do so.
    Please feel free to write me back if you have any other questions.
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Printer Driver wont work

    I run an Epson 9800 printer on iMac 10.5.8 which has worked fine until I ran a security and bluetooth update and now it just wont see the printer at all. Ive deleted the driver and downloaded it again but when i go to Add new printer its just not showing up at all, can anyone help?

    First try Reset Printing System:
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/14001.html
    If it doesn't help, try repairing the hard drive ("Try Disk Utility"):
    http://support.apple.com/kb/ts1417

  • HP B110a driver wont install

    I have Windows 7 and a B110a printer.  Since the lap top needed to be wiped I cant reinstall the driver to the printer. I get to where it is "checking the system" and then just stops.
    This is really frustrating and if it means that I have to buy a new printer it will definately not be HP.  I've had problems with this printer since day one and this is just the icing on the cake.
    Any help would be appreciated

    Welcome to the forums! I hope you are well
    I saw your post about having to reinstall your Photosmart B110a printer however, you are having an issue doing so on your Windows 7 system. I will gladly help where I can and hopefully the frustration will dissipate!
    First, test the unit itself. Make a copy or two. If the printer copies fine, the printer is fine and the issue is more software related.
    If the copies are good to go, try disabling your firewall and then running the installation. There are two methods you can use to install your printer.
    1. HP Printer Install Wizard for Windows
    2. HP Photosmart Full Feature Software and Drivers Download
    If the installation is not successful, try a Clean Boot and run the installation again.
    Keep me updated with your results so far and I will check back on our thread!
    Happy Tuesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Windows 8 (64) Intel HD 4000 driver wont install on x230t

    I have installed all the up-to-date drivers on my x230t running Windows 8 (64), but for some reason this one gives me an error:
    "The setup program failed to install one or more drivers. Setup will exit"
    Here is the driver for Version 9.17.10.2828
    http://support.lenovo.com/en_US/downloads/detail.page?&DocID=DS030728
    I downloaded the one directly off the Intel site for their 4000 Graphics chip for windows 8, but its an "older" version. 
    Any ideas on how to get the newer driver working?
    Thanks in advance

    You have to disable driver signature verification, because these drivers are not digitally signed.
    Go to settings-> change pc settings-> general-> advanced startup to get to the boot menu where you can do this.
     After the boot menu appears:
    Troubleshoot-> Advanced options-> Startup Settings-> Restart
    After the new boot menu appears:
    Press 7, disable driver signature enforcement.

  • Power Management Driver wont install in Windows 7

    Hi All, I've been trying to get my blue Fn keys to work on my recently purchased SL500.  Volume and screen brightness keys work (but no on-screen display), however Fn+F3 & F5 do nothing, as does the blue ThinkVantage button.  Installed drivers via System Update, however every time I get the message "Package did not install - ThinkPad Power Management Driver for SL Series".  Power Manager is installed and running but the driver is not listed under Program & Features.   I'm guessing the lack of this driver is the problem.  Anyone else seen this or have a fix ?  Thanks.

    Please visit: http://support.lenovo.com/us/en/downloads/ds014985 but don't download the most current version (3.89.0100) at the top. If you look at the readme, you'll see that the SL500 is not included in the supported systems list.
    Instead, scroll downwards to the version table and have a look at the readme for v3.88.0000. You'll see your machine in the supported list, so you could give that one a try, if you want.
    Regards.

  • Driver wont install thinks Im not an ad

    I rebooted my OS (windows xp home) and am reinstalling all my software.
    When I try to download the driver for my Zen Xtra jukebox, I can download it, but as I start to install, it tells me I don't have access to make the changes, tells me to rerun the install with admin privilegs. The problem is that I do have admin privliges in my profile.
    Any have ideas?
    thanks

    Are you THE administrator?
    Because if you're not THE administrator but rather part of the administrati've group, there may be some NTFS rights or GPO's that are priorized over the administrati've group's rights.Message Edited by Prosis on 05-06-2006 05:48 AM

Maybe you are looking for