Cannon printer/scanner image class mf4150

can I install my cannon printer/fax/scanner image class MF4150 to my IMAC OS X Mountain Lion?

Hi Glenn!
I will be glad to assist you.
It appears that one of the buttons on the control panel may be sticking and causing the error.  I recommend powering off the machine and unplugging it from the wall.  Once the unit is unplugged, press all of the buttons on the control panel, starting left to right, one at a time.  Next, plug the machine back in and power it on. 
I hope this information is helpful to you.  If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666) for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • Mavericks won't work with my cannon printer/scanner Cannon MP560 what can I do to solve this?

    mavericks won't work with my cannon  Cannon MP560 printer/scanner what can I do to solve this?

    Try restarting the device first..
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, then swipe the slider to power off.
    Then press and hold the Sleep/Wake button until the Apple logo appears.
    If that doesn't help, try here > iOS: Troubleshooting Messages

  • Updating printer canon image class mf8050cn

    are there any updates for the canon MF8050Cn printer to allow airprinting?

    Not according to http://support.apple.com/kb/HT4356.

  • OS X 10.8 not recognizing scanner on canon image class MF4270

    I have mac OS x 10.8 (mountain lion), and canon image class MF4270. Printer works fine; won't recognize scanner.  I've installed the latest driver updates for my image class MF4270 from canon website, both fax and UFR II printer driver v2.43.  Also have MF toolbox and Canoscan Toolbox 5.0.  Nothing is working.  What do I do now?
    Robin Kelson
    [email protected]
    THank you

    There is no scanning support for this model.
    MF ScanGear does not support the MF42xx series. And CanoScan Toolbox is just for the inkjet-based models and stand-alone scanners.
    Also, there is no ICA driver for this model so you cannot use Image Capture.
    And resetting the printing system will not resolve your issue.

  • My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

    My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

    Yes. I have the latest version intalled but this hasnt helped.
    I thought it could be to do with the Shuffle not having enough of a battery charge.
    So i plugged it into the wall charger and then tried this didnt work either.
    It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

  • Setting Black and White as the default when printing to a Canon Image Class 4080i

    Hi,
    I've got two Canon Image Class 4080i's that we are printing to at the school I work at.  I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7.  My question is, how do I make the default printer setting be Black and White instead of color?  I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print.  Is there a way to make black and white the default?
    Thanks in advance,
    Cheryll

    You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer?  I would highly discourage that, but if that’s what you want to do I’m sure it’s possible.  Sorry, I have no experience with that printer so I can’t help.
    Do you have a laptop?  My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does -  and then print from LR.  It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing. 

  • Since upgrade to Mountain Lion my scanner and Image Capture program will not work ( have a Canon MP980 printer/scanner). How do I correct?

    I recently installed Mountain Lionn on my iMac. After installing the Image Capture program no longer allowed me to  scan - I immediately received an error message. Even when I tried to scan directly from the printer/scanner (Canon MP980) I received the same message. Scanner worked fine with 'Lion' How do I correct this problem now?

    http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp980#DriversAndSoftware.

  • How to print the image data stored in object of 'java.io.File' Class in jsp

    I have created a file object for the image file in the system temporary directory.Now I want to display it in my page. please tell,How to print the image data stored in object(in my program it is imgr) of 'java.io.File' Class in jsp

    Create a servlet which gets an InputStream of the file and writes it to the OutputStream of the response and call this servlet in `src` attribute. That's basically all.
    Here's an example which covers the most of the minimum needs: [http://balusc.blogspot.com/2007/04/imageservlet.html].

  • HT1338 I want to print via my orang livebox through a cannon mp210 printer/scanner. Orange and Apple information suggests this can be done. I have attached the USB cable to the livebox and printer, reset the livebox no result. installed printer cd on imac

    How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

    How do I print wirelessly via a cannon mp210 printer/scanner. I have followed guidance re-routing the USB from PC to livebox and printer, reset the livebox and installed printer drivers on the imac to no avail.

  • Image Class 7470 printer won't power up

    My Image Class 7470mf printer will not power up.  Is there a power reset or is there a serice manual available (online preferred) where I can troubleshoot this problem?

    Hazinpa, HP printers go to sleep if the printer is not active for more than 30minutes and however if the wireless radio button is ON and your network is installed fine then when you give the print command the printer automatically comes out of sleep mode to print.

  • Lexmark printer/scanner and Image capture to PDF

    I am trying to use a x5250 Lexmark printer/scanner to scan with image capture.
    The printer installs fine and gets recognized. And I have the latest drivers from lexmark
    so when I use the scanner with Image Capture, it scans fine, I can save it as jpg, png, etc.
    The only one that gives me problems is when I try to save it as a PDF. It makes the PDF, but when I try to open it with Preview, it says unrecognized file format or corrupt.
    I then tried to open it on a linux machine (ubuntu) and it opens fine.
    Any ideas?

    Update on this: Image Capture still creates corrupt PDF, but it is a problem with Image Capture. VueScan scans to PDF just fine.

  • Cannon printer driver wont install

    I cant get my cannon d420 image class printer to in install on my new computer running windows 7

    Are you running Windows 7 x86 (32bits) or x64 (64bits)?
    You should be able to get the drivers from this website: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d420#DriversAndSoftware
    Select your operating system (To find it, Open the start menu, Right-Click on My Computer, select Properties. The system Type will tell you if you are 32 or 64 bits)
    Select the driver package and download it. For installation instructions, follow the website:
    *Precaution When Using a USB Connection
    Disconnect the USB cable that connects the device and computer before installing the driver.
    Connect the USB cable after installing the driver.
    Driver and application software files have been compressed.
    The following instructions show you how to download the compressed files and decompress them.
    1. To download files, click [I Agree-Begin Download] icon, select [Save], and specify the directory where you want to save the file. Click [Save] to start the file download.
    2. Downloaded files are saved in the specified folder in a self-extracting format (.exe format).
    3. Double-click the files to decompress them. A new folder will be created in the same folder. The new folder will have the same name as the compressed file.
    4. Double-click the decompressed Setup.exe file to start installation.

  • Cannon printer

    Has anyone had a problem with iMac 10.6.8 not recognizing a Cannon Image Class D 420 printer?

    Hello kj6oc,
    It sounds like you are not able to print to your Canon printer.  I found an article with steps you can take to troubleshoot printer issues on a Mac:
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    You can find the full article here:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I am unable to scan from my HP all in one printer/scanner

    Since installing Mavericks I am unable to scan using my HP printer/scanner.  I have uninstalled the software and tried to just use Apple method - but really cannot find out how to scan and save.  Does anyone have any ideas?

    Hi eleanorfromhunton bridge,
    Thanks for visiting Apple Support Communities.
    Be sure to use the steps in these articles to set up and scan with your scanner:
    OS X Mavericks: Set up a scanner
    http://support.apple.com/kb/PH14252
    OS X Mavericks: Scan an image
    http://support.apple.com/kb/PH14251
    If the steps above do not work, these printer troubleshooting tips may also help with scanner troubleshooting:
    Delete the affected printer, then add the printer again.
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    From:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Regards,
    Jeremy

  • Re-size an image in using the Image class?

    Is there a way to resize an image using the com.day.cq.wcm.foundation.Image class?  I wanted to extend the foundation image componet and have it resize to a specific height and width.  Is there a way to change the size of the image before you call image.draw(out) ?

    You also don't want to insert you resizing efforts prior to calling the image.draw method. The draw method doesn't actually render the image,  it draws the HTML img tag that your components print out. If you were to use the ImageHelper to get the layer and resize it that would not actually change the size of the image.
    Now that img tag will contain a URL to the image, and that URL will generally look something like this (unless you have customized your image components):
    /path/to/your/page/_jcr_content/par/textimage/image.img.jpg/1323947520848.jpg
    This URL is going to trigger a script or servlet that will be responsible for rendering the image. In the example above because the textimage component extends the parbase component and because URL includes the img selector it will end up triggering the servlet at /libs/foundation/components/parbase/img.GET.java. If you go into CRXDE Lite you can go to this file and look at the source code of this servlet and see an example of how it uses the layer to resize the image if that author edited the image in the smart image widget.
    You can also see example of servlets that resize and image ot specific preset sizes (as you want to do) you can look at /apps/geometrixx-outdoors/components/product/image/thumbnail.GET.java and /apps/geometrixx-outdoors/components/product/image/nav.GET.java.
    So what you would want to do is something like this:
    Create your own component at /apps/mysite/components/foo
    Create a servlet at /apps/mysite/components/foo/bar.GET.java - put your logic to resize the image here based on some of the examples
    Create your component JSP at /apps/mysite/components/foo/foo.jsp
    Create your component's dialog and in this dialog include a smart image widget - make sure you store your image on component node, not a sub-node. If you store your image on a sub-node you need to make sure the sub-node includes the same resource type as your main node).
    In your component JSP when you create your foundation Image object make sure to image.setSelector("bar") before you call image.draw()
    That should result in an image URL that looks like /path/to/your/page/_jcr_content/par/textimage/image.bar.jpg/1323947520848.jpg
    Those steps aren't tested - so I may have missed something or mistyped something, but it should point you in the right direction.

Maybe you are looking for