Cannon printer setup

how do i set up my cannon MF4300 printer with mac lion?

The MF4300 uses the Canon UFR2 driver. This driver is not part of the Canon Printer Driver Update provided by Apple and thus the procedure Tony suggested won't help.
Instead you can download the lastest version of the UFR2 driver for Lion here. With this driver installed, and with the printer connected, open Print & Scan and select to add. With the Default Add Printer view selected the MF43xx should show (note you may see two entries if the model has fax support, so don't select the one showing Fax). After selecting the MF43xx printer, the Print Using may tell you that no driver is installed. Ignore this and open the Print Using menu and click on "Select printer software". With the window that appears, type MF43 into the filter section. This should the show the "Canon MF4320-4350 UFRII LT" and "Canon MF4360-4390 UFRII LT" in the list. Select the model you have and click OK then Add to complete the print queue creation.

Similar Messages

Printer Setup Utility has been deleted

Since updating to OS X 1.4.9 my cannon laser printer will not work my Mac sees that it's connected via USB it just won't print to it.I'm the administrator on my G5 but it says i do not have permission to open this software.But somehow I have managed to delete my Printer Setup Utility how can I re-install it.
Thanks Paul

Welcome To Discussions Paul!
You'll find it here Pacifist.
Good Luck!
ali b

Cannon printer help!

I recently got a new iMac g5 20 inch screen 2 Ghz. I had also purchased a Cannon i960 printer for my previous printer, and iMac G3. It works fine on the G3 (running 10.3.8) But now on my G5 (on 10.4.2) it doesn't work! I tried installing the driver, but then after I printed something, I went to print something else, but it didn't work! I need to reinstall the driver every time I need to print something! Help!

Will,
I have a Canon i860 which uses the same driver 2.3.5. Open Printer Setup Utility
Highlight the printer click on "get info" if it's there and you'll see the driver version. I couldn't get into Canon's US site but here's a link for your printer via the Canadian site:
http://www.canon.ca/english/index-customersupport.asp?pid=255
The download is there. Don't forget to repair permissions after the install. Hope this helps!
Liz

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

I have a iPhone 4S and a Cannon Printer with AirPrint. I have the printer and the iPhone both on the same network, however I still can't locate the printer on the phone. Works just fine with the laptop on the same network. Any suggestions?

ok no problem! all i did was 1) set up the mobile hotspot on my phone. 2) turn it and wifi on on the phone. 3) connect the laptop/desktop to the hotspot network. 4) insert setup disk for the printer and begin setup. 5) complete the setup "using a usb cord to temporarilly connect the computer and printer" 6) unplug usb cable and finish set up on the laptop/desktop. 7) give it a few minutes to show up on the AirPrint menu on the phone. 8) that should be it. I unplugged the printer and plugged it back in, made sure the laptop was totally turned off AND disconnected from the network, and did everything I could to try and make it not work. The printer I have is a Canon MG3122, it doesn't have a fancy screen or even a way to input a password or anything like that, so it just strores a default network that it will connect to. in order to change networks i would have to complete setup multiple times. Since I only plan to use it with AirPrint for my mobile business....the one network is just fine! Hope this helps!

Need help to find printer setup utility

I recently bought my first Mac and have slowly been adding to it over the last couple of weeks. Today I added a new printer that I wish to connect wirelessly. The printer is a Brother MFC-3360. I installed the software that came with the printer and had the printer connected directly to the Mac Book. It printed just fine.
I then disconnected the USB cable and plugged it into the Extreme Base station. It failed to print. According to the Extreme manual, I need to open printer setup utility, located in the utilities folder in the applications folder. Then from there I need to add the printer.
The problem is, I have no printer setup utility. Is there another place where it might be located?
Any other ideas will be much appreciated. Thank you!

Found problem. Went to Sys prefs -> Printers and Fax -> removed my printer and re-installed. Works like a charm.

Printer Setup for HTML reports (Landscape)

I'm trying to print an HTML report in Landscape, the Report Orientation VI only works with Standard Reports, and I can't find anything that will let me modify the "Printer Setup"
Anyone done this?

Jeff,
To print an HTML report it first has to be rendered. To render HTML, you need a browser. For example, you can render HTML in either Internet Explorer or Firefox or Opera, and all three might render the same data slightly differently. To simplify the situation let's say that you're using IE. Once IE renders the HTML, you then have to get it to send the rendered output to the printer. So you can see why it isn't time or cost-effective for NI to try and necessarily support these functions. For the end user however, I'd guess that quite a few people have had this problem.
I have had to do a lot of digging around to get HTML reports to print right. My solution has been to use an ActiveX container with an IWebBrowser2 object (Internet Explorer). This will let you load and print HTML reports programatically however (glancing back over some old code) I don't see immediately how you can print a report in Landscape. With an ActiveX container however you can call the IE print preview function which will let you (the user) modify the report printing to Landscape. It's not a programmatic solution since you have to interact with the GUI but it works. Also, once you set the setting to Landscape, everything printed afterwards using your ActiveX container will also print in Landscape.
Something else which may not apply to you (but maybe--I'll at least mention it) is printing a landscape single image... that's usually why I needed to print landscape... to print out a full page screenshot of a graph or something. I do this in portrait mode by just attaching the control image but rotating it first and adding the HTML code to make it 100% of the vertical page.
Last but not least, if you are 100% set on using a programmatic implementation to print a landscaped report (no user interaction), the best thing to do would be to build on an ActiveX implementation so that your report is being loaded and printed from an embedded IWebBrowser2 object. With the IWebBrowser2 object there is an option for using a pre-defined print template. This option is NOT for the faint of heart and requires you basically to re-program the whole IE print-preview functionality. However, it's not impossible either, it just takes the time of learning basically how the IE print preview interface works and then adapting it to your application (in this case, landscaped printouts). This is also the ONLY way to change HTML report headers and footers. The print preview interface in IE is written entirely in javascript--you can get details on msdn (search for "print preview templates"). However, there isn't really enough info there to do things with any ease. So....
If you get to the point where you get an ActiveX container working and want to fool with the IE print preview javascript templates, let me know. I have extracted the entire template and associated images from the windows DLL it is stored in so I could adapt it and change the headers and footers for my reports and things of that nature.
Now that I mention it, I believe that is the only way also to actually set landscape or portrait--by programmatically changing the printing margins (so it prints 11x8.5 instead of vice versa).
Anyway, hope that helps...

I am unable to print PDF's using either Adobe Reader or Safari. In Adobe Reader, I get an error message from my Cannon printer that says, "/usr.libexec/cups/filter/pstocupsraster failed". In Safari, I can only print the first page of a PDF.

To try to resolve this problem, I have done the following actions.
1 - I have run Disk Warrior.
2 - I have repaired permissions.
3 - I have deleted all plist that are either Cannon or Adobe.
4 - I have downloaded and installed the lastest versions of Adobe Reader and the Cannon printer drivers.
I am still unable to print PDF's.
In Safari, I can print only the first page. In a multipage PDF, Safari only seems to recognize the first page.
In Adobe Reader, I get an error message from my printer: "/usr/libexec/cups/filter/pstocupsraster failed".
Any help would be greatly appreicated!

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

Why doesn't the HP printer show up in the printer setup utility?

Can't understand why the HP2100 TN laserjet printer that is networked(ethernet) via a Snow basestation does not automatically show up in my list of printers. I also downloaded HP's drivers for it.
My boyfriend's Powerbook running 10.3 is able to automatically see it, and it showed up as "shared" on my computer when his laptop is up and running. I tried Appletalk etc. He got it running using IP printing and having the IP address, but he told me it should have just showed up.
I'm new to the Mac so I don't understand this. According to the config page he printed Appletalk is active on the printer its selected on my networking page.
Any help apprciated.
Macbook Mac OS X (10.4.8)
Macbook Mac OS X (10.4.8) printer setup utility v 4.6

Try to check here.
http://docs.info.apple.com/article.html?artnum=303593
http://www.mac.com/1/learningcenter/Modules/LHTSolve_t4.html

My new Canon Pixma 7250 wireless printer can no longer find my wireless network. My MAC is, Yosemite 10.10.2. I've run diagnostics and Canon LAN printer setup routine many time. Is there a solution? Can anyone help?

My new Canon Pixma 7250 wireless printercan no longer find my wireless network. (It worked fine until recently) I have a Yosemite 10.10.2. I've run diagnostics and the Canon LAN printer setup routine many times. Is there a solution? Can anyone help?

Turn of the MG and unplug the power cord. Leave it off for about a minute and then reconnect the power cord and turn the power back on. Wait while the device attempts to reconnect to your wireless network - the blue wifi symbol on the MG will flash and then stay on once it has connected. If it keeps flashing then you will have to reconnect the MG to your wireless access point via the control panel on the MG.

How do I make my Cannon Printer MP250work with my new iMac?

Just bought the iMac, and I need to use my old Cannon printer. Plugged it in and the printer is not responding. Is this a device driver issue, software,etc.?

I visited Cannon, downloaded the driver/software for PIXMA MP250 but the printer will not respond when I click print.

HP Laserjet 6p is not recognized in Printer Setup Utility

I bought recently used HP Laserjet 6p printer and connected my PB to it's Apple Talk port via AsanteTalk Box. After I installed the HP 6p printer driver (downloaded from the HP site) I've tried several times to find the printer in the Printer Setup Utility but it doesn't appear on it! I've even downloaded a printer driver for MacOS 9 and tried to print in Classic environment but can't find any HP printer in the Chooser. Is there any solution for this problem?
I'll be very thankful for any suggestions.

Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

Epson 4800 Ethernet IPP Network Cant Add PRINTER SETUP UTILITY

Greetings!
Any known issues?
Does anyone have this working??
I am having a time TRYING to ADD a new Epson 4800 printer, Epson Ethernet card onto new Mactel laptop and new quad G5 (both 10.4.7).
Epson NetConfig Utility sees the printer and set an IPP address.
However, Apple PRINTER SETUP UTILITY Add IP printer isn't working.
I had qualified Epson support taking me through the steps...he said some issues with the Intel books, but that doesn't explain why the G5 isn't working.
Three hours yesterday and I'm back on it later today...any tips/info appreciated.

Hi all,
I recently bought an Epson Stylus DX4850 and I'll be damed if I get the thing installed on my Intel based Mac! This is driving me mad, I've been told that it is compatable. I've downloaded all the drivers from the Epson website but when I go to add the printer it's not listed. Does this mean that I need to use a different driver or gimp driver?
Any help would be greatly appreciated and would prevent me from going insane!
Many thanks, Jon
Mac OS X - Intel Mac OS X (10.4.7)

How to do selection of the Matt Black/ Photo Black in the print setup of Acrobat Pro (for an Epson 7890).

How to do selection of the Matt Black/ Photo Black in the print setup of Acrobat Pro (for an Epson 7890) ? Selection of the media ?

Acrobat's print dialog doesn't deal with hardware-specific features, for that you have to click on the "Properties" button next to the dropdown printer selection field.

No drives shown in printer setup utility

Accidently erased printer drive for Hp deskjet 935c, when I went into printer setup utility app there was no drivers displayed even when I hit "more printers" still no divers were shown. I thought somthing wrong with printer setup utility app so I reinstalled it using Pacifist still no change. Need help soon kids on my back to use printer.
Mac OS X (10.4.7) imac 500

That was the next question. I just went through 5 hours of frustration with a new printer and cable on a Canon MP780. The cable was bad. It works great with a good cable.
MJ

CAN'T GET PRINTER TO ADD IN PRINTER SETUP UTILITY

I've recently purchased a Epson DX4850 printer for use on a Mac using 10.3.9. I installed without problem and it worked fine for first 4 days. Then the driver seemed to disappear. I tried to readd through printer setup utility but it came up with message "SERVER ERROR SERVICE UNAVAILABLE". I tried reinstalling, redownloading driver from Epson website, deleting prefernces and reinstalling but it wouldn't work.
I don't get the message anymore but when I try to add printer it says its found printer driver do I want to refresh the screen but then when I click ok nothing happens.
Under Epson USB it's blank and under USB it has Stylus driver with a ? and not installed.
I've had the printer checked and that works fine.
CAN ANYBODY PLEASE HELP ?

Sorry Hirsty I can't help but just to go on the list that I"m having similiar problems with my Canon ip4200. I'm running 10.3.7 and can't even find the drivers even though I've installed them from the disc and then from a download. Still won't show up.

Cannon printer setup

Similar Messages

Maybe you are looking for