Cannon smartbase mp360 or bin it and get a budget inkjet
Hi all,
I need a really quick response if possible as I have to get a printer working on my mac by the end of next week.
I have just bought a macbook with Tiger and cannot get my cannon smartbase mp360 to work.
So far the only solution I have found is to use a printfab driver that costs 50 euro's to unlock. The cannon website does not support my printer.
Does anyone know of a free driver that will work natively on tiger osx or if this is not the case, can someone recommend me an inkject printer that will work with fully supported drivers. Scanning is not important, the priority is to print notes for university. Photo's are not important either.
Also 3rd party ink carts are a bonus. Normally Epson and cannon are good for this?
So If anyone could help me on my way to trouble free printing, I would be much obliged.
Thanks, Matt.
Macbook Mac OS X (10.4.8) cannon smartbase printer
Hi Michael, thanks for taking the time to look into it. It is classed as multifunction printer (has a scanner too).
this should be a link to the page:
http://software.canon-europe.com/products/0010031.asp
A lot of the sites I have read today have stated that canon are not supporting this printer on OSX.
I've just ordered an HP Deskjet 3920 as it is only £25 and should work out of the box. The order should get processed tomorrow, but if anyone knows of solution please keep me posted.
Thanks again,
Matt.
Similar Messages
-
As a recent ipad owner I can't delete my mail. I tap the bin, delete and get info that message can't be moved to mail trash. Help! I have a hundred messages that need deleting.
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
How do I get my ipod touch to restore? I have followed all of apples instructions to no avail.
What exactly happens when you try to restore?
-
Itunes wont startup and getting exception errors
So, here I am with my brand spanking new ipod touch 4 gen and very excited, that is until.... I realise something's wrong, very wrong.
I download the new version of itunes ontop of my old version, and try to start itunes and get this error:
"The exception unkinown software exception (0xc0000409) occured in the application at location 0x01aa3335", so I tried the below and still get the same error:
* uninstalling anything itunes related & reinstalling
* uninstalling anything itunes related using Revouninstaller & reinstalling
* deleted temp drive (as per support page)
* reconfigured using msconfig (as per support page)
* cleared my recycle bin and rebooted machine numerous times
I need help and don't know what I should do next..... anyone?Can you reinstall iTunes and then post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. -
How to Install emacs, openssh and start oracle database and get a connect?
As suggested by another poster, I installed the prebuilt appliance at [http://www.oracle.com/technetwork/community/developer-vm/index.html] and [http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html] with the intent of running oracle database in a linux vm as a guest on windows 7 and connecting to it using JDBC from the windows host.
This is running but I don't know how to install other stuff. I tried "sudo yum install openssh" and "sudo yum install emacs" and "sudo service sshd status" and none of these worked (it could not find these packages). I could not get apt-get or app-get or aptget to work either. I was hoping that "uname -a" would tell me if this was fedora or debian or something else but no luck. What command do I use to learn the distro name?
How do I make ifconfig tell me what the ip address so I can use "scp" and "ssh" to get into the box? Ok, /sbin/ifconfig works and I see there is only a loopback address. Ack! How do I create a socket so I can ssh into this little beastie?
How do I disable the firewall or (better yet) punch holes in it so I get use JDBC and ssh, scp and samba from windows 7?
I tried firing up the SQL Developer 3.1 and getting a test connection with username and password of "oracle" with no luck. How do I get a test connection to work?
How do I determine if the database is running? If not, how do I start it and stop it and restart it?
Thanks
Siegfried
Edited by: user8816970 on Sep 15, 2012 6:29 PM
Edited by: user8816970 on Sep 15, 2012 6:33 PMThere is no "oracle" account native to the database itself. This is just the default account that owns the application. Log on as oracle/oracle to the OS. (OEL) You can change the passwords of the sys and system account by setting your $ORACLE_HOME and $ORACLE_SID. Default SID is orcl on a database install. Also set a path to the oracle binaries in the form of $ORACLE_HOME/bin.
Then sqlplus / as sysdba
Change passwords of sys and system using the following example.
ALTER USER SYS IDENTIFIED BY [password];
ALTER USER SYSTEM IDENTIFIED BY [password];
The supplied appliance runs oracle enterpirse linux. Not debain or fedora.
Why do you need "emacs"?
I haven't personally load this appliance with Virtual Box but there has to be a readme file somewhere that details all the passwords and etc. -
I had my 4S activated at the store, but when I got home to sync up my phone and get all of my contacts, nothing is happening. I backed up my 3GS before switching phones, so it's all on my computer. Any ideas?
Launch iTunes. From the menu bar click Store / View My Account
Click: Edit Payment Information
Make sure you have the correct Security Code.
Then click: Done
And try resetting your Apple ID password. https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa -
Memory Problem with SEt and GET parameter
hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
v_nbc like eban-bsart,
v_nbo like eban-bsart.
v_nbc = 'CAPX'.
v_nbo = 'OPEX'.
v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
set parameter id 'ZC1' field v_nbc.
elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
set parameter id 'ZC2' field v_nbo.
elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
set parameter id 'ZC3' field v_nba.
endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
RanveerHi,
I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
v_second TO MEMORY ID c_memid. "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
v_second TO v_fcode_2
FROM MEMORY ID c_memid. "ZCCBPR1
FREE MEMORY ID c_memid. "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM -
I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?
Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
Assigning a hex value to a variable and getting binary value of a variable.
I try to develop java programs and I need to do a conversion unicode to EBCDIC and vice versa.
How can I assign hex values to variables to build UTF-EBCDIC and EBCDIC-UTF table and get hex or binary value of data to compare it to value of in the table?
I did a conversion like this with PL/1 before. I do not know how can I do it with Java. Because I am new to Java.
Thank you in advance.I will run java code in mainframe and java uses
unicode for data in default and mainframe environment
is EBCDIC. So I have to translate the data from
unicode to ebcdic.I said I think String supports EBCDIC encoding...
String ebcdic = new String(ebcdicBytes, "Cp500");
http://java.sun.com/j2se/1.4.2/docs/guide/intl/encoding.doc.html -
I've only had my iphone 5s for a week. I keep getting an error message of "Server has stopped responding." I need the server to work. Does anyone know if there is a "fix" for the problem? Other wise, I probably best return for a refund and get a Samsung. Thanks
sandyzotz wrote:
Other wise, I probably best return for a refund and get a Samsung.
Unlikely. Based on the complete lack of detail of the issue provided it is entirely possible the same issue would occur.
Unless and until the user provides some actual details of the problem, there is nothing the indicate that the issue is with the iPhone. -
I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it this about and how do I get my product back
Hi there
I have version 5.7 and every time I opened it I was told that updates are available and to click on the icon to access these. Instead it just took me to the
adobe page with nowhere visible to update. I then sought to download lightroom cc and this is when I could not access the 'develop' section due to reduced
functionality It was apparent that my photos had been put in cc but no way to access them unless I wanted to subscribe.
I have since remedied the problem as my original lightroom 5.7 icon is still available on the desktop and have gone back to that. I do feel that this is a bit
of a rip off and an unnecessary waste of my time though.
Thank you for your prompt reply by the way.
Carlo
Message Received: May 04 2015, 04:52 PM
From: "dj_paige" <[email protected]>
To: "Carlo Bragagnolo" <[email protected]>
Cc:
Subject: I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have
reduced functionality what it this about and how do I get my product back
dj_paige created the discussion
"I have just sought to update my lightroom and am now unable to access the develop function and get a note stating that I have reduced functionality what it
this about and how do I get my product back"
To view the discussion, visit: https://forums.adobe.com/message/7510559#7510559
> -
How do i upgrade my hard drive and get it to boot in Mountain Lion?
I have a Late 2009 Macbook 6,1 and want to install a new, larger capacity hard drive. Currently I am running Mountain Lion and don't have any install disks, so the question is, what is the process to change out the drive and get the Mac to boot after the new drive is installed. Since it is a new drive it won't have a recovery partition or any operating system files. My plan is to migrate my data using my Time Machine backup, but I worry that when I try to boot after the new drive is installed, all I will be greeted with will be a flashing question mark. I'm really having a hard time finding a step-by-step set of instructions for someone attempting what I'm trying to do. I do have an external enclosure I could put the new drive into before I put it into the Mac. Would I try using something like Migration Assistant to transfer all of the files to the new drive and then just swap out drives afterward? Would the OS migrate as well, or would I still not have a bootable drive? Or is there some kind of minimal boot disk I could burn onto a CD or flash drive and then once the machine boots go with a restore from Time Machine Backup? I'm open to any ideas anyone may have on the least painful way to go about this process. Maybe use some (hopefully free) software of some sort to clone the current drive onto the new drive while it's still in the external enclosure? Any help or ideas would be greatly appreciated!
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
Something was hidden in a download and now these double green underlined hyperlinks show up everywhere, and pop ups too whenever I click on ANYTHING. I can't figure out how to find it and get rid of it.
You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised the value of Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
When I plug me ipad to itunes i get the error message that it is not supported and that i have to go to itunes and get "itunes installer" and re-install. if i do this will i loose my files and music?
No, you should not lose anything.
Maybe you are looking for
-
.OAM file in Muse - invalid block type (type==3)
Every time I try to insert an Edge .OAM file in muse and try to publish I keep getting an "invalid block type (type==3)" error, over and over... it doesn't matter even if the OAM file is empty, it still displays this problem... could someone please
-
Is it possible to override built-in forms procedures like call_form?
hi, is it possible to override built-in forms procedures like call_form? i want to override an existing built-in procedure so i don't need to change all my .fmbs. thanks in advice
-
The computer has been running very slow and so I decided to run techtool. It has locked it up with the HD picture with a red cross on it on the screen. I am confused as to what to do next. Any suggestions. Thanks in advance.
-
Hi gurus I have created a report in ALV and it runs fine in the foreground and when the enduser runs it in background it should save the output to excel file on some h:/reports/report.xls and iam using WS_EXCEL functionmodule to download to excel. It
-
I am writting a Crystal application, where users could run adhoc reports and schedule them. My AdHoc options works fine, but I am having some issues with the Scheduling portion. In my project, to read the parameters, I am using CrystalReportsPartsVie