Cannot able to assign Operation number for Order for Change cost assignment in Travel

All dear Gurus,
During the creation of travel request in NWBC suppose if an employee opted to change cost assignment. And he selected order from Accounting Object and given an order. He is not able to select it because he is getting an error when he click on Accept.
The error is " Order 1000000160 requires assignment to an operation number "
In ECC we have an option called Enhance Cost assignment through which we can choose the operation number. But no such option is available in NWBC.
Kindly help me to solve the issue.
Regards,
Namsheed.

Hi,
Business Area is a Required entry for G/L account 1180 300000.
So
Go to FS00, and check Filed Status Group,for G/L account 1180 300000
Go to OBC4, check the Filed Status Group, what u have mentioned for the G/L account 1180 300000.
Go To material management segment and put optional entry for the field of Business Area and save.
Now try ur transaction.
Regrads,
Biju K

Similar Messages

Changing cost assignment after posting advance

Hi Friends,
I have a problem;
I create a travel request (TRIP) with some advance request
Cost is charged to Cost center 100%
Settle the request, post the adance(PRFI, PRRW)
Enter expenses,
Change cost assignment to WBS element in PR05
Post the trip
it posts to same cost center, not to WBS element
Please note that i post the trip in accounts depending upon activity type. For WBS, we have different account
If there was no advance posted, the WBS change takes place correctly.
any solution please!
Thanks and regards!

Hi,
Till you create an expense report you will be able to change cost assignment, but once expenses is created no changes can be made to the cost assignment.
And also, while posting you can change the cost assignment either from cost center --> cost center or WBS --> WBS and not vice versa.
Hope this helps.
Regards,
S.Srikanth

Account Assignment Category in Rework Order for non valuated material

Friends,
We created non valuated material for rework. I want to accumulate the rework cost. When i am trying in CO02 = Header = Settlement Rule where the category is MAT but I want it to be ORD.
How that category is changed to ORD, so that I can able to accumulate cost with respect to order?

Hi,
Whether you are creating the rework order with material? Actually rework order is supposed to be created without material with transaction CO07. Here in this case you have to define the account assignment category ORD in settlement rule.
In some cases to meet the requirement we can create the rework order with material also through transaction CO01/CO08, but in this case the account assignment category will be MAT by default. Therefore you cannot change it to ORD.
Hence you need to create rework order to have account assignment category ORD w/o material only.
Regards,
Sandeep

Assigning mic in operations of production order for newly inserted oprt

Hi, Please advise how to assign mic to the newly inserted operation of the prod order?i mean say 3 operations copied form master data. we added a 4th operation manully. i want to assign new inspection characterstics to the 4th opration. plese advse.

Dear Raju
1) Go to CA02
2) go to header
3) Maintain inspection Point as 150
4) Maintain partial Lot Assign as partial lot assignment according to plant default
5) At Operation level maintain a QM work center ( testing ) with Control key QM04 ( as per your requirement)
6) double click on the control key and go to Quality Management : Inspection points
7) Maintain Inspection point completion : Quantity , Valuation and confirmation ( as per your need , you can select other options also) press F1 and see the impact of each
8) choose time related and keep Tfac 1 and Unit as HR ( As needed)
9) You can select quantity - related also and then maintain the quantity.
10) Select the QM operation and maintain in the MIC
Regards
Gajesh

Cannot see pick list on releasing production order for WH managed material.

Hi guys
I created workcenters, routing, bom, control cycle record and prod. verison for the material before creating the Prod. order. Now, I am neither able to see the Pick List nor Material Staging (Simulation) after releasing my Prod. Order. The exact error is "No WM relevant components exist". All my materials are warehouse managed.
Any help gurus??
Regards,

Hi
you are mentiuoning that control cycle .
Have assigned the coponents to the storage location which is assigned to ware house.
pl. chk this.
Regards
YMREDDY

Assigning informations in Sales Order for Sales BOM components with DI Server

Hi,
We are adding sales order in SAP B1 using DI Services(Order Service). In the Documents row, we are assigning only informations of the BOM parent and the child components are getting automatically added by the system, petty much the expected behaviour so far. But now, we want to assign a warehouse to the BOM parent and all of its children. How this information can be added? Is there any way to do so with the Add operation?
Regards,
Victor

Dear Sanju,
Could you please explain what you have done for the same?
Thanks & Regards
Piyush

RE: Cannot use my skype online number have pay for...

You should be able to start using your purchase immediately. However, in some cases, you may have to wait up to an hour for it to be activated. If you're still having problems, visit our help section. Have try to use my online number is not working have pay for one year my #is 229 515-4522 please i need help.

Please contact customer Skype customer service: https://support.skype.com/support_selection

How do I find my account number in order to change carriers?

I need to know my account number to transport my telephone number to another carrier but I can't find it or find out how to find it? Does anyone have a clue?

Look at a past bill or on My Verizon or make a call to customer service.

Change cost assignment (cost center) in confirmation with badi?

Dear experts,
for a certain request, we want to implement logic that will clear out the cost center when creating or saving the confirmation.
We have tried the DOC_CHANGE BADI but this does not seem to do the trick. following code:
LOOP AT acct_data into ls_acct_data.
    IF ls_acct_data-acc_cat EQ 'OR'.
      CLEAR ls_acct_data-cost_ctr.
    ENDIF.
    MODIFY acct_data from ls_acct_data.
ENDLOOP.
ET_ACC[] = acct_data
Is my code wrong, or should i use another badi?
Regards,
Tom

Hi,
I have tried the following but does not seem to change anything:
Loop at IT_ACC into ls_acct_data.
If ls_acct_data-acc_cat EQ 'OR'.
    CLEAR ls_acct_data-cost_ctr.
Endif.
MODIFY it_acc from ls_acct_data transporting acc_cat.
Endloop.
Also with the following method, it is not changing the account assignment. I am in doubt that this badi could actually change the account assignment on confirmation?
Loop at IT_ACC into ls_acct_data.
    If ls_acct_data-acc_cat EQ 'OR'.
      CLEAR ls_acct_data-cost_ctr.
      Append ls_acct_data TO lt_acc.
    Endif.
Endloop.
ET_ACC[] = lt_acc.
Edited by: Tom Seminckx on Jan 20, 2009 1:18 PM

Merging the Production order number and operation number into sequential no

Hi,
I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the sequential number which is present in the assignment tab should come as a concatenation of order number and operation number .
Thanks for the help in advance.
Regards,
Venkat.

dear,
this depends on the user buffer set.
for each user there will be a buffer set in when logeed in and create a production order.
depending on the saving the production order saving time there may be a situation as you have now.
discuss with your basis people and under stand the user buffer of numer for production order.

Merging of Prodn Order number and operation number into the unloading point

Hi,
I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the unloading point which is present in the Goods Receipt tab should come as a concatenation of order number and operation number .
Thanks for the help in advance.
Regards,
Venkat.

Hello Rachit,
The relation is as follows
AFKO-AUFPL (Routing number is Order header)
Use this routing number to get operations from AFVC
AFVC-VORNR gives operation number
AFVC-LTXA1 gives operation description
For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
AFVC-APLZL is a unique number for each operation.
Hope this helps. You can check with some existing/new orders as well.
let me know if you need anything about split operations as well.
Best Regards,
Subhakanth

Error while creating a transfer order for delivery note.

Hi Gurus,
I have already created an outbound delivery. I am creating a transfer request as a basis for goods movement in the warehouse and to print the picking list. so i use the path:
Logistics -> Sales and Distribution -> Shipping and Transportation -> Picking -> Create Transfer Order -> Single Document.
Now here i enter the warehouse number, plant, delivery. when i press enter i get error "No items that are to be picked were found".
I went to the following IMG path -- Enterprise Structure --> Assignment --> Logistics-Execution --> Assign Warehouse number to plant/storage location.
Assign the warehouse to the plan and storage location.
Still i get the same error. Could some one help me out here?
Thanks in advance
Amit

Hi,
can you check whether Warehouse number exists and transfer order creation is required or not at Delivery document under Picking tab

Sales orders for quotation do not cif to APO

Hi experts,
I face an issue I cannot cope with:
when I create an order for a quotation and order quantity is less than quotation quantity the order doesn't cif to apo. When I make another order and quotation is closed the only second order comes to APO and total requirement decreased, because the quotation disappears. If the order is created for a full quantity, the qotation disappeares and order cames OK.
In R/3 I set the rule of position completion = A (complete at first call), document flow records = '2', effect of value copied = '+', copy schedule lines = ' '.
I'll be very pleased if anybody gives an idea how to get a distribution of requirements between quotation and order in APO.
Dimitriy Karpov

Hi,
If you are replicating the sales order from R3 to CRM then you will get all the orders present in CRM. If that is not the case then you need to write one RFC in R3 to get the desired data as R3 is governed by Select queries on tables instead of Function modules in CRM.
So if you want to fetch any information from R3 then you need to create RFC and use select query to get the data.
Thank you.
Ashish

Max number of orders

Hi,
I am working on ECC 6.0.
I have been trying to use the Max number of orders for a Z condition type .
The Max number of orders it is not working even after reaching the max order even after reaching the max order. If anyone has faced such an issue before kindly help.
I had set the limits for pricing in the VK11 - additional data- Max number of order But of no use.
Thanks
Manoj

hi,
pl check if the conditin update field in the condition type definition is ticked or not at V/06.
regards
sadhu kishore

Table name for order schedule line changes

Hi Friends,
There is a background program running periodically. Sometimes line items confirmed dates changed, we want to know a way that what line items for orders are changed. Is there any table, which would give the schedule changes information for the line item or there any other method to find it. Your answered much appreciated. Thank you!
Regards
Raji
Edited by: raji reddy on Jun 5, 2008 4:24 PM

Hi Raji,
These are the standard tables where SAP stores change details for all areas of the system. The initial key is the object class and you need to enter this to get a quick access via SE16 - VERKBELEG is the key for sales documents. If you then have, for example, a sales order number you can enter that (but ensure you enter leading zeroes) and a table and/or field name.
Regards,
Brian

Cannot able to assign Operation number for Order for Change cost assignment in Travel

Similar Messages

Maybe you are looking for