Cannot access a thread after getting 46 feedbacks!

On 15 Jan 2008 I replied to a discussion topic-- and since then have replied several times; and received 46 eMails with other peoples' replies. It is thread topic: http://discussions.apple.com/thread.jspa?threadID=1342101
BUT now when I try to go to this topic, it says "YOU DO NOT HAVE PERMISSION TO ENTER THIS TOPIC" or something similar to that...
Can you tell me why I am suddenly "cut-off" from this most interesting and informative discussion topic?
THANKS--
Steve
MacUser since 1989

Because it was removed due to inappropriate content.
Joe

Similar Messages

I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I have not changed anything thankyou for any info.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, elect the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
See also: remove app
Keywords: refunded canceled

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
on the 32 bit machines I was able to apply this hotfix
http://support2.microsoft.com/kb/2738898
But it will not install on 64 bit machines.
Is there a hotfix for 64 bit? If not, what is the work around?
Thanks!
Robert

Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

Cannot access my Ipad after downloading latest download. It wont accept my password.

I cannot access my Ipad after downloading latest download. The Ipad wont accept my password. What can I do?

Try the following:
1. Restore:
http://support.apple.com/kb/HT1414
2. Recovery:
http://support.apple.com/kb/HT1808

Cannot access address book after software update

I am unable to access the default address book after doing the software update - I restored my backup and everything is there except for my contacts. When I open my address book it is labeled personal and there are no addresses and when I add a contact it does not show up, but I noticed when I go into options it shows only default under address books with 99 entries and when I try to add a contact it does not show in the list on my phone but the number of entries in the default book goes up so they are going into that one but I cannot access it? Any idea how I can get my contact list back? (hope this makes sense to someone )
Thank you
Solved!
Go to Solution.

Sdgardne, thank you so much! Using your post and links I was able to restore my address book after upgrading my software and having trouble with my address book. And I am very technologically challenged so I appreciate having something I could understand and follow.

"Site System Status Summarizer still cannot access storage object" after DB Move

After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
https://support.microsoft.com/en-us/kb/2709082
Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
Solution: Investigate and correct any problems on your network.
Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
Possible cause: You accidentally deleted the storage object or took the storage object out of service.
Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
occurs properly.
The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
to OK, providing that the storage object has sufficient free space.
I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

Was a site reset performed at all yet? This has to be done.
Torsten Meringer | http://www.mssccmfaq.de
Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

Cannot access web console after install.

Hi all.
The last day has been my first encounter with Oracle VM and it seemed to go fine until I finished. I have installed the latest VM and management tools on a bare bones machine (spec below) but cannot access the console via http://machine:8888/OVA.
I have tried installing using https and without and can gain access to neither the https 4443 or the http 8888 yet I can ssh into it quite easily. The dmesg only really complains that there are no ipv6 routers (understandable) but the xend.log in /var/log/xen does show something strange at the bottom:
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:452) Adding Domain: 0
[2011-07-13 16:04:45 3011] DEBUG (XendDomain:386) number of vcpus to use is 0
[2011-07-13 16:04:45 3011] INFO (SrvServer:177) unix path=/var/lib/xend/xend-socket
[2011-07-13 16:04:45 3011] DEBUG (XendDomainInfo:1727) XendDomainInfo.handleShutdownWatch
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_type not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: session.get_all_records not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_record not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_all not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.get_network not found <------ ?????
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_device not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MAC not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MTU not found
[2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: debug.get_all not found
The spec of the machine started out as:
Athlon 64 x2 3600+
4Gb Ram
2 Nics (1 built in Broadcom & 1 Intel MT)
1 NVidia super duper gt9500
3 Hard Disk, (1 IDE 150gb , 1 SATA 80 & 1 SATA 150 - the IDE is master boot with system on it)
After a few attempts, I removed Video and the Intel card.
The install was done via CD and never complained and in this last install, it only had 1 NIC to choose for the management console.
On this last install I also chose top use none https and therefore the system says I should gain access via http://machine:8888/OVA
I do notice though that in some tutorials, it states alternatives to OVA like OVS etc, all of which I have tried.
Oh and if I netstat -an, it shows it's listening on port 8888.
many thanks, I'm guessing it's some a bit silly that I've over looked but from the way I read the install instructions, you only need the VM and the management Disks to install and you should be able to access via web console?
BTW, systems I'm using as clients to access range from, opera, firefox (Soalris), ie 6,7,8 & 9 from Windows and Windows server. All I get is Internet Explorer Cannot Display This Page.
many Thanks, Mark

Did you install the VM Manager software as a VM hosted by OVS? Make sure the VM is running. It is probably named something like OVM_EL5U4_X86_OVM_MANAGER_PVM. Use "xm list" on the OVS server to see which VMs are running.
If it's not running, then run "xm create /path/to/vm.cfg" the path is probably something like /OVS/running_pool/OVM_EL5U4_X86_OVM_MANAGER_PVM/vm.cfg
Jim

Cannot access usb ethernet after upgrade

I upgraded from 10.5.5 to 10.5.8 via download and now cannot access USB Ethernet. Select "Network" in System Preferences & all I get is "beach ball." When I disconnect USB Ethernet, Network appears. I had to use Apple USB Ethernet adaptor because Ethernet board got fried and did not want to buy new Mac. Can I go back to 10.5.0 then to 10.5.5 combo? If so, how?

Solved my own problem. Reinstalled 10.5 then the 10.5.5 Combo updater and now USB Ethernet works. I guess I will stay away from any further updates after this. So, my ancient eMac lives for another day.

After updating itunes i cannot access the istore, after updating itunes i cannot access the istore

I have updated itunes and after updating itunes I cannot access the istore through itunes. Additionally, my Iphone 4 will not back up. When I tunes is running my compter CPU usage is operating at 100% and I've never had this problem before. HELP!

Sounds like you should reinstall itunes, i'd follow one of these, whichever is most appropriate to get it done properly because on windows there is more than just itunes that needs taken off and reinstalled.
http://support.apple.com/kb/ht1925 for windows xp
http://support.apple.com/kb/ht1923 for windows vista/7
as long as you follow these it won't mess with your content as its saved in a different location.

TS1702 Help cannot access my AppStore after updating my ipad2 to iOS 6

I updated my software into iOS 6. After the update I noticed that the you tube apps is gone and I started to open my AppStore but I can't access it... What will I do??? I tried to reset everything but still I cannot access the AppStore . Pls help me. Tnx

The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

Cannot access internal LAN after VPN connect

I know this is either an ACL or NAT issue that I cannot figure out. The nat-t config in defaulted in the IOS config for the ASA. I actually forgot the command to show the hidden default config lines. Either way, can someone take a look at my config, and let me know what I am doing wrong, again.
Thanks ahead of time.
ASA Version 8.2(2)
hostname ciscousa
enable password
names
interface Vlan1
nameif inside
security-level 100
ip address 1.1.1.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 14.14.11.5 255.255.255.0
interface Vlan3
shutdown
no forward interface Vlan2
nameif dmz
security-level 50
ip address dhcp
interface Ethernet0/0
switchport access vlan 2
speed 100
duplex full
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 100
duplex full
ftp mode passive
same-security-traffic permit intra-interface
access-list outside_in extended permit icmp any any
access-list inside_nat0 extended permit ip any 1.1.1.0 255.255.255.0
access-list inside_nat0 extended permit ip any 10.12.27.0 255.255.255.0
access-list split_tunnel standard permit 1.1.1.0 255.255.255.0
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool vpnpool 10.12.27.100-10.12.27.120 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0
nat (inside) 1 0.0.0.0 0.0.0.0
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 14.14.11.6 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 1.1.1.0 255.255.255.0 inside
http 1.1.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map inet-1_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map inet-1_map 65535 ipsec-isakmp dynamic inet-1_dyn_map
crypto map inet-1_map interface outside
crypto isakmp identity address
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy vpnipsec internal
group-policy vpnipsec attributes
wins-server value 1.1.1.16
dns-server value 1.1.1.16
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split_tunnel
default-domain value company.com
tunnel-group vpnipsec type remote-access
tunnel-group vpnipsec general-attributes
address-pool vpnpool
default-group-policy vpnipsec
tunnel-group vpnipsec ipsec-attributes
pre-shared-key *****
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512

Hello,
I have been trying to get this to work within the last week but to no avail. I changed my config altogether and started from scratch. I have Split Tunnel working well, and I can access the VPN client from the internal LAN. But I still cannot access the internal LAN from the VPN client host. Can anyone take a look at my config and tell me what ACL\Access Group I am missing. I know I am close but I cannot get over the hump.
Thanks!
ASA Version 8.2(2)
names
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address xxx.xxx.xxx.xxx 255.255.255.0
interface Vlan3
shutdown
no forward interface Vlan2
nameif dmz
security-level 50
ip address dhcp
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 100
duplex full
interface Ethernet0/4
interface Ethernet0/5
switchport access vlan 3
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list outside_in extended permit icmp any any
access-list outside_in_vpn extended permit ip 192.168.3.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
access-list split_tunnel standard permit 192.168.0.0 255.255.0.0
access-list split_tunnel standard permit 192.168.1.0 255.255.255.0
access-list inside_access_in extended permit ip any any
access-list outside_access_in extended permit ip any any
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool ipvpn 192.168.3.100-192.168.3.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
access-group inside_access_in in interface inside
access-group outside_in in interface outside control-plane
access-group outside_in_vpn in interface outside
route outside 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map internet-1_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHAESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map internet-1_map 65535 ipsec-isakmp dynamic internet-1_dyn_map
crypto map internet-1_map interface outside
crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map inside_map interface inside
crypto isakmp identity address
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy DfltGrpPolicy attributes
group-policy vpnipsec internal
group-policy vpnipsec attributes
wins-server value 192.168.1.5
dns-server value 192.168.1.5
split-tunnel-policy tunnelall
split-tunnel-network-list value split_tunnel
default-domain value company.com
tunnel-group vpnipsec type remote-access
tunnel-group vpnipsec general-attributes
address-pool ipvpn
default-group-policy vpnipsec
tunnel-group vpnipsec ipsec-attributes
pre-shared-key *
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
prompt hostname context
Cryptochecksum:7e41045c9d7c66ac2c03c3b12ae63908

I have 4 emails in junk folder, but I cannot access them, all i get is a "no message " sign

I have four messages in my junk folder but I cannot access them, when i click
on the folder I get "No message selected"
Help

You will need to erase the HDD and start over by reinstalling the OS and setting the Mac up as a new one with your own Apple ID.
Linc gives you a few options how;
https://discussions.apple.com/message/25672158

Time Machine: Cannot access old backups after migrating to a new mac

Hello,
I have bought a new Mac (With Snow Leopard installed on it). I have used it for about half an hour to have fun with it.
Then, I have decided to use Time Machine & Migration Assistant to restore all my files from my old Mac (Leopard). The restoration was successful and I was very happy to see that all my files and settings were there.
However, when I try to access my old backups (the ones I have done prior to buying the new Mac), Time Machine says I do not have the permissions to access it.
Is there an way to fix this? I would like to be able to access these old files.

I am having a similar problem and do not understand the solution. I have a new Macbook and transferred my data from my Powerbook G4. However, I cannot access anything! There is a no entry sign on the folders and if I click them I get this message: 'The folder “Pictures” can’t be opened because you don’t have permission to see its contents.'
Help - but please, in simple language
Thanks

Accessing a thread after serialization

I have a requirement where an object fires off a thread which is going to do about 30 mins worth of work, maybe more. Once the thread is set running the object which created it is liable to be serialized and stored away somewhere. At some point the controlling system will deserialize that object and have it check on its worker thread. I thought I'd create the thread, set it going, then store the Thread object in a member field of the triggering object.
First, if I then serialize the triggering object and destroy it, will the thread keep going? I assume it will, but can someone confirm?
Second, once I deserialize the triggering object, will the Thread member field it has still correctly refer to the running thread? And if the running thread has ended in the meantime, how can I test for that?
If this "just isn't going to work"(TM) what would be my options? I have a distributed system which would be complicated if I need static thread objects, but I can do that if there's no other way.

baftos wrote:
You cannot serialize a Thread or any object that has a non-transient Thread field. Therefore, the Thread field cannot be used after deserialization as such (it will be null).
What you can do is to add/remove Threads as they start/complete to a Map<unique-id, Thread>. The serializable object can have the unique-id as a field.
Upon deserialization, it will need to find the Thread in the map, based on the unique-id.Ah, OK. I understand. So the map you refer to needs to be held in my application somewhere. It can't be stored away somewhere externally and recreated when I need it. OK, I can cope with that. Thanks.

Cannot access a thread after getting 46 feedbacks!

Similar Messages

Maybe you are looking for