Cannot access ASA5510 for first time config ASDM or PING

Question

     Hi
I have a fresh out the box asa5510 with 8.4 on it.
I have built these before but for some reason cannot get this one to work. I am consoled on, have applied the following config but can still not ping to or from, can not asdm, cannot http/s. Arp table shows device it tries to ping, but device trying to pping it has incomplete arp entry.
I am really stumped, does anyone have any idea?
Please also see attached diagram for topology.
Thanks in advance
ciscoasa(config)# show run
: Saved
ASA Version 8.4(4)1
hostname ciscoasa
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/1
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
ftp mode passive
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0
access-list MANAGEMENT extended deny ip any any
pager lines 24
logging enable
logging console debugging
logging buffered warnings
mtu management 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any management
no asdm history enable
arp timeout 14400
route management 0.0.0.0 0.0.0.0 10.90.255.126 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 0.0.0.0 0.0.0.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect ip-options
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect sip
  inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
  no active
  destination address http
https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email
[email protected]
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly
  subscribe-to-alert-group configuration periodic monthly
  subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:79dc4cfc6161dcbd01a016ad9a2a2ca5
: end
%ASA-7-111009: User 'enable_15' executed cmd: show running-config
ciscoasa(config)#

Answer 1

Hi,
In this configuration:
interface Management0/0
nameif management
security-level 0
ip address 10.90.255.99 255.255.255.128
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0         // ACE1
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.0.0.0 255.0.0.0    // ACE2
access-list MANAGEMENT extended deny ip any any                                                       // ACE3
In ACE1 the network 10.0.0.0/8 in the destination is not in the same network with 10.90.255.0/25 (MGMT interface)
Can you try these ACEs:
access-list MANAGEMENT extended permit ip 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended permit icmp 10.0.0.0 255.0.0.0 10.90.255.0 255.255.255.128
access-list MANAGEMENT extended deny ip any any
I agree with Jouni, in first time use a PC directly to the MGMT interface.
and use the clear arp command to clear the ARP cache
Best regards