Cannot access backup files external drive - only unknown user can
I've been in problems since a while with the _unknown user issue. I've read several discussions like the following:
https://discussions.apple.com/thread/2290911?threadID=2290911
My problem is the following. I upgraded to snow leopard 10.6.7 and I did a clean install so I wiped out my internal harddrive, I wanted to start from scratch again. I figured that I would be able to access all the files on my external harddrive in my Timemachine backup. Everything works fine, except that I can't access the time machine backup. It says 'you have no access' under Info of these maps and only user _unknown can read and write.
I guess the solution must be that I create a new user account which corresponds with UID of the _unknown user account and that should replace it and should restore access to the files? The only thing is that it is a timemachine backup so I don't know if that poses some additional problems. It would be helpful if someone could explain me what the real problem is, I've been trying lots of thing, but I'm afraid that I would make things worse. So your help we be greatly appreciated!
Some commands which might be helpful:
Tim-Dosts-MacBook:~ timdost$ ls -ladeO /Volumes/Mybook/Backups.backupdb/Tim\ Dost’s\ MacBook/2011-06-06-140100/MAC/Users/timdost/Documents
drwx---rwx+ 15 503 staff - 510 6 Jun 10:21 /Volumes/Mybook/Backups.backupdb/Tim Dost’s MacBook/2011-06-06-140100/MAC/Users/timdost/Documents
0: group:everyone deny add_file,delete,add_subdirectory,delete_child,writeattr,writeextattr,chown
Tim-Dosts-MacBook:~ timdost$
Tim-Dosts-MacBook:~ timdost$ id
uid=501(timdost) gid=20(staff) groups=20(staff),402(com.apple.sharepoint.group.1),204(_developer),100(_lpopera tor),98(_lpadmin),81(_appserveradm),80(admin),79(_appserverusr),61(localaccounts ),12(everyone),401(com.apple.access_screensharing)
Tim-Dosts-MacBook:~ timdost$
With friendly regards,
Tim
You will have great difficulty defeating the ACLs and permissions on your backups.
Your best bet is to start over; erase your disk, install OSX, and use Setup Assistant to transfer all your stuff. See How do I set up a new Mac from my old Mac or its backups?, and note especially the green box there.
Similar Messages
-
Windows Authentication login cannot access backup files stored in Users\[User] folder.
I am currently logged in to my database engine using SSMS and Windows Authentication; specifically, I am logged in with Joe-PC\Joe, where Joe-PC is the domain name of the machine hosting the database, and Joe is the user that created the database.
If it matters, I am running all of this locally from Joe-PC.
I have a .bak backup file stored in my C:\Users\Joe\Desktop folder that I am trying to restore. However, I get an error saying 'Either the location does not exist, or the current login account does not have access to it.' I am certain the location
exists, as I am looking at it right now, and I can't see why Joe-PC\Joe wouldn't have access to it's own user folder.
I am absolutely baffled as to why this is behaving this way. I am fully aware that I can work around the issue, but I'd like to know why this isn't working as it seems like it should. Does the Windows Authentication that SQL Server uses not have
the permissions that the account would normally have? Is the Windows Authentication user even the same thing as the user that logs into Windows? What else could be going on that I don't understand?Keith
Thanks for your answer. My user account is one of two administrator accounts on this computer (the other is only set up for consistency sake, and has probably only been logged into a total of 5 times; all of our computers have the account though, so
I thought I should put it on here as well). The issue isn't that my account doesn't have restore permissions, just that SSMS can't access the user folder when logged in using Windows Authentication. Another issue that I assume is related results
in a lack of permissions on backup files until I manually set permissions to 'Everyone' under the backup file's properties\security tab. Also, not sure if it matters, the backup is taken from a customer's computer running Win 7 Pro x86 while my computer
is on Win 7 Ultimate x64.
Not sure if this helps pinpoint the issue, but my current workaround is as follows:
Copy the .bak file to the C:\Program Files (x86)\Microsoft SQL Server\MSSQL10_50.WSA\MSSQL\Backup (default backup folder)
Right-click the .bak file and go to the properties toolbox. Select the Security Tab, give full permission to 'Everyone'.
In SSMS, select 'Restore Database' after right-clicking on 'Databases' in left-hand tree.
Give the DB a name, restore from device, select my file.
This method hasn't failed me yet, but any deviation (other than setting permissions before or after moving) causes me to get access errors when I try to restore. Fortunately, this isn't a production database engine, just a testing environment, but
I'd like to get an idea of what's going on, because I know it's only a matter of time before I or a customer runs into this issue. -
I am working with a client who is attempting to backup to a NAS device
The device is a linksys NSS6000 (Cisco device).
It’s a dual 1Gbit LAN device that supports CIFS / FTP and NFS transfers. It has only 1Gbit lan connected.
The device has 4 * 500 gb sata drives in raid 1 attached.
Cables go from cat 5 to fiber back to cat5. (The NAS is located at a neighboring office) The switches are 1gbit.
Server is a win2k8r1 fully up to date.
When backing up to the NAS device, the following error occurs:
Running backup of volume Local Disk(D:), copied (86%).
Running backup of volume Local Disk(D:), copied (90%).
Running backup of volume Local Disk(D:), copied (94%).
Running backup of volume Local Disk(D:), copied (98%).
Backup of volume Local Disk(D:) completed successfully.
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The process cannot access the file because it is being used by another process.
If we redirect the backup to a folder on a 2008 share, the backup completes successfully.
Only when backing up to the linksys NSS6000 does the error occur.
No other backup processes are writing to the NAS device so I can't understand why the process thinks the file is
being used by another process.
One thing we did notice that when the backup to the NAS device occurs, throughput is about 150 mbit average
On the 2008 server shares we successfully backup to, the through put is 500 mbit. Not sure if that is important, but
might be worth mentioning.
The following event log entry was noted at the end of the backup.
The description for Event ID '519' in Source 'Microsoft-Windows-Backup' cannot be found.
The local computer may not have the necessary registry information or message DLL files to display the message,
or you may not have permission to access them. The following information is part of the
event:'2009-05-12T10:13:31.617Z', '', '2147942432', '%%2147942432'
Any ideas?
Thanks..MichaelI am also seeing the same problem backing up nightly to a brand new NAS device (WD My Book Live)
All the error codes are the same as those in this thread.
From Windows Event Viewer:
The backup operation that started at '2011-03-25T06:00:19.811302700Z' has failed with following error code '2147942432' (The process cannot access the file because it is being used by another process.). Please review the event details
for a solution, and then rerun the backup operation once the issue is resolved.
Fault bucket 659897467, type 5
Event Name: WindowsBackupFailure
Response: Not available
Cab Id: 0
Problem signature:
P1: Backup
P2: 6.1.7600
P3: 0x80070020
P4: 7
P5:
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Windows\Logs\WindowsBackup\WindowsBackup.1.etl
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Analysis symbol:
Rechecking for solution: 0
Report Id: dd480bf2-56a6-11e0-ae81-00217099bf56
Report Status: 0
From Report.wer in C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_Backup_6957d65de91fc4a853ecc7c78914bf7351fff0d1_14578325
Version=1
EventType=WindowsBackupFailure
EventTime=129455071508181139
Consent=1
UploadTime=129455071508201140
ReportIdentifier=dd480bf2-56a6-11e0-ae81-00217099bf56
Response.BucketId=659897467
Response.BucketTable=5
Response.type=4
Sig[0].Name=Operation
Sig[0].Value=Backup
Sig[1].Name=AppVer
Sig[1].Value=6.1.7600
Sig[2].Name=HRESULT
Sig[2].Value=0x80070020
Sig[3].Name=TargetType
Sig[3].Value=7
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
State[0].Key=Transport.DoneStage1
State[0].Value=1
State[1].Key=DataRequest
State[1].Value=Bucket=659897467/nBucketTable=5/nResponse=1/n
FriendlyEventName=WindowsBackupFailure
ConsentKey=WindowsBackupFailure
AppName=Windows host process (Rundll32)
AppPath=C:\Windows\System32\rundll32.exe
ReportDescription=Windows Backup failure -
I have an iMAC running Lion cannot access my Microsoft Network drive. It sees it on Finder but said connection failed. By other Macpro Laptop which run Leopard has no problem at all. It lreads and load my photos from the RAID Drive. I am sure some asked the question before but it is new to me. That was the reason I am not upgrading my Macpro to Lion yet. was it a bug in Lion networking area?
Thanks for the help !
H5N1You need to move to Windows 7, because Apple is now releasing a new OS X version annually and it's playing havoc with people's hardware and software.
Windows 7 will get support until 2020, that's 8 years of software stability, however you do need to make System Restore disks, boot disk and another on a hard drive to self restore (like TimeMachine is for OS X)
Apple has no plans to change their currrent behavior as all they care about is selling new hardware with a shiny new OS X verison on it.
If you wait to move, what will happen is you'll lose that full 8 years and will have to swtich to a newer Windows sooner
Windows 7 machines are still widely avaialble, despite Windows 8 (a failure) being pushed currently.
Running three OS X operating systems on one machine is quite a chore reserved for only seasoned computer geeks, then it's only going to last X months as the next OS X version will be released, then the next a year after that.
Another method would be to get a virtual machine software (virtualbox is free) and install Windows 7 into that to ease your transitition if you cant' spring for a Windows 7 machine, preferablly a tower that will last a long time.
Here is a method to run Snow Leopard in Parallels, however it's a unapproced hack and not for the comptuer newbie.
http://forums.macrumors.com/showthread.php?t=1365439
We have no control over Apple's OS X release cycle, nor the third party developers who make their own decisions what to support.
Our only choice as users to stop using both products and seek software/hardware stability. -
HT201250 Can I do a backup using Time Machine on a server, or it needs an external drive only?
Can I do a backup using Time Machine on a server, or it needs an external drive only?
Time Machine can back up to a server. The drive or partition used still needs to be formatted Mac OS Extended (Journaled).
(65169) -
Read/write access on external drive set to none; can't see drive to change
I was learning about profiles and permissions and set the Read/write access on my external drive to none. I wanted to protect my guests from accidentally viewing private files. I thought I was doing it for that profile only, but now I can't see the drive to change it back. I have already tried using the disk utitility and re mounting the drive, but still cannot see the drive icon on the desktop or anywhere. I know the drive is okay because I can see it in disk utility but disk utility says the read/write access is none.
thanks for anyone that can advise me. I'm more of a PC expert, than a Mac expert.
GaryFollow the instructions in this FAQ which are relevant to your situation; logging in as root is not needed.
(18945) -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
"The process cannot access the file ..." occurs when export crystal report
We are using a web application developed in VS 2005, .NET 2.0 with the bundled Crystal Reports version 10.2.3600.0 running on a Windows 2003 Standard server with 4GB Ram and Dual CPU's. Periodically we are still receiving the following error in our production environment:
InnerException:
The process cannot access the file because it is being used by another process.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
This is occuring at the point on the code where the report is being exported to a PDF. Exporting the report to Excel does not appear to cause the error.
Stream outStream = report.ExportToStream(ExportFormatType.PortableDocFormat);
byte[] charStream = new byte[outStream.Length];
outStream.Read(charStream, 0, (int)outStream.Length);
if ((charStream != null) && (charStream.Length > 0))
HttpContext.Current.Response.ContentType = "application/pdf";
HttpContext.Current.Response.OutputStream.Write(charStream, 0, charStream.Length);
HttpContext.Current.Response.End();
report.Close();
report.Dispose();
ds.Dispose();
GC.Collect();
Closing and disposing of the report and dataset (xsd) are followed by a call for garbage collection. We are unable to produce the error in our development environmennt and have not at this point been unable to pinpoint a problematic report. The development team members do have SP1 installed. The report limit has not been changed from the standard of 75 jobs. Reviewed the following document, Re: "The process cannot access the file ..." occurs when export crystal report However this applies to VS 2008. Any suggestions to resolve the issue would be greatly appreciated.
Thanks,
JoeGood morning Joe
For more details re. loading please see the following resources:
[Crystal Reports 2008 Component Engine Scalability|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412?quicklink=index&overridelayout=true]
[How Can I Optimize Scalability?|http://msdn.microsoft.com/en-us/library/ms225519.aspx]
[Choosing the Right Business Objects SDK for Your Needs|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7]
To answer your questions:
Is it correct to presume that the physical number of CPU's is not factored into the CPL? So that a Server with 2 or more processors does not increase the 3 concurrent requests? Therefore 2 CPU's would not increase the CPL limit to 6 processes?
- Server with 2 or more processors does not increase the 3 concurrent requests.
What would be an alternate solution to this limit be, considering the report requests could increase significantly?
- Only way around this would be to web farm the solution
If only only 3 reports can be processed at the same time. If one or more of the reports currently processing is taking longer due to receiving large amounts of data, how does that affect the queue? And what is stored in the queue, data and/or the report? Is this something that could consume memory?
- The report can take as much time as it needs. The result is that one license will not be released until the report is done. There is no data stored, just a pointer to the report. However queued apps will chew up memory, some times to the point of the server becoming unresponsive
I have read in the documentation on this site, that the dataset sent to the engine is copied in memory during report construction. So if a large amount of data is requested for a report (as an example 10+ MB) Could enough users requesting reports drive the memory up because memory usage doubled due to the dataset?
- Absolutely. See [Crystal Reports Guide to ADO.NET|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20].
Understanding the the CR DLL's are loaded on the first report request, do they get released at some point time due to inactivity or garbage collection? How much memory usage could be consumed when they load and stay resident?
- No they do not. Not as long as the application is running.
Ludek -
ITunes Error Code -36. Unable to BackUp to External Drive.
iTunes Error Code -36. Unable to BackUp to External Drive.
As of yesterday 9th Jan,2009, I am unable to backup up all
my 79Gb iTune tracks unto my external Iomega MiniMax Hard drive.
Which is very odd, as I never had a problem doing likewise
in the past.Each time it went smoothly and as planned.
Drag and drop procedures.
Here is the error message I keep getting every time I
try to execute the transfer:-
The Finder cannot complete the operation because some data
in"FBCIndex" could not be be read or written.
(Error code- 36)
Tried all previous soloutions including repairing and fixing
Mac Hard Drive using Disc utilities.
Should I do an Archive and Install or perhaps deleting the
iTunes preference files...all possible soloutions will be gladly
recieved.I'm in your hands.
My Music is my life... you probably
can relate to my level of anxiousness in this one?
CJ*I should have been a Genius!*
Problem solved; I can now drap and drop to update
my itunes folder without any error messages etc,.
Memo to self and others.
ALWAYS, ALWAYS, ALWAYS when updating your OS
install the COMBO update and not what Software Update selects
for your particular Mac in Software Update.
CJ -
Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Recurrent error in Win32 install logs (The process cannot access the file..
hi forum !
I'm already on my third installation of Hyperion Essbase and still getting the same error within the logs :
(Jan 31, 2008 1:48:29 PM), essbaseServer7_0_0Suite, com.installshield.wizard.platform.win32.WindowsSharedFiles, err, ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
(32)"; severity = 0)
STACK_TRACE: 23
ServiceException: (error code = -30016; message = "The process cannot access the file because it is being used by another process.
(32)"; severity = 0)
at com.installshield.wizard.platform.win32.Win32FileServiceImpl.win32SetFileModified(Native Method)
at com.installshield.wizard.platform.win32.Win32FileServiceImpl.setFileModified(Win32FileServiceImpl.java:115)
at sun.reflect.GeneratedMethodAccessor272.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(LocalImplementorProxy.java:52)
at com.installshield.wizard.service.AbstractService.invokeImpl(AbstractService.java:51)
at com.installshield.wizard.service.file.GenericFileService.setFileModified(GenericFileService.java:185)
at com.installshield.product.actions.Files.setFileTimes(Files.java:1608)
at com.installshield.product.actions.Files.install(Files.java:460)
at com.installshield.wizard.platform.win32.WindowsSharedFiles.install(WindowsSharedFiles.java:87)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
at java.lang.Thread.run(Unknown Source)
can use the products but this shouldn't be fine... do I have to stop a service or grant some permission ? any help is appreciated.
thanks & regards,not having any JAVA_HOME env var. Did some checkings and :
- one machine was having Java libraries because of DB2
- the other machine was a fresh Win2003SP1 with SQL Server 2005
guess can set JAVA_HOME to C:\Hyperion\common\JRE\Sun\1.5.0 before installing Essbase, but also guess it's a documented/automatic step... wonder what I'm missing ?
doing the most basic-mode installations (defaults, automatic deployments), once I get them clean will perform more sophisticated ones. Searched the 9.3.1 doc PDFs without useful findings. -
Hi,
I've a master package that calls other packages with an Execute Package Task. Sometimes we have an error: "The process cannot access the file because it is being used by another process" and sometimes not. It seems random.
We are working on a Terminal Server and the SQL Server database engine and the files are placed on another server. It seems that the errors doesn't occu when we run the packages on the server with a job. We can't log onto the windows server on this machine..
HennieI've seen this myself. On most occasions an immediate rerun would fix the issue. As stated this happens only when we try to run this from BIDs. From SQL agent job it always runs fine.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
The process cannot access the file because it is being used by another proc
We are exporting crystal reports into PDF using ExportToHttpResponse (code snippet below)
// Getting the type of the report file which has been selected by the user. (which will be REPORT CLASS type)
Type objType = Type.GetType("WebApplication1.Reports." + ReportName);
ReportClass SEPREport = (ReportClass)Activator.CreateInstance(objType);
// GetTypedDataSet()returns an instance of typed data set.
SEPREport.SetDataSource(GetTypedDataSet());
SEPREport.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response, true, ReportName );
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0.
Now on our machines, we have never experienced any issues.
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
The process cannot access the file because it is being used by another process. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The process cannot access the file because it is being used by another process.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80004005): The process cannot access the file because it is being used by another process.
CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +525
CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) +681
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) +105
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName) +163
CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName) +132
MSSB.FATools.UI.PlannerReport.CreatePDFDocument() +732
MSSB.FATools.UI.PlannerReport.btnCreatePDF_Click(Object sender, EventArgs e) +45
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +104
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5615A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
Using Time Machine to Backup an External Drive (RAID 1)
Is it possible to backup an external drive to another external drive using Time Machine in Mountain Lion?
The following diagram describes what I want to do. I am basically trying to use Time Machine as an external RAID 1 system. However, I don't want to buy a RAID 1 box. I want to have control of TWO OR MORE time machine setups. I don't want to backup my OS every time. I simply want to backup one external drive to another external drive. The drives are 2TB each, so the advice to buy a big hard drive to back everything up on won't work. Also, I am often swapping drives and would like to use this system for all of my projects and all of my drives. Any help would be great. Thanks for your time.
NOTE: I am on Lion and wanted to know if this was possible before upgrading.To be clear, TM can back up your external drive perfectly well, provided it's in MacOS format. What it can't do is back up the external drive alone to one destination, and everything else to a different destination.
As for what you should use instead of TM, I don't really have an opinion. SuperDuper and Carbon Copy Cloner are well regarded. You need to make some decisions about backup strategy before you choose a backup method. TM makes incremental backups, so you can revert to any of several earlier versions of a file. Those third-party products can do that too, though not as efficiently as TM. Also bear in my mind that a single backup is inadequate. You need more than one backup to be safe, and to be truly safe, at least one backup must be stored off-site at all times. -
my computer with itunes zapped by lightning. cannot access itunes files. how can i transfer my music on my iphone to a new computer. much of it was not purchased from itunes store
Did you fail to maintain a backup copy?
If so, then you can buy a third party program to extract the music not purchased from itunes.
Itunes purchases can be transferred to your computer: File>Transfer Purchases.
Maybe you are looking for
-
It doesn't even open, and the new tab just closes. I don't know what happened, it was working fine just a little bit ago.
-
So I noticed my iPod touch 4th gen. Seems to die quickley. Last night I fell asleep while it was charging and when I woke up it showed that the battery was still dead. I took it off for the day and I tried again tonight. I plug iN. It shows that the
-
Author time, attach components by drag and drop.
I want to build a component that provides a set of behaviors, the component can be added to anyone's library, and then dragged onto any movie clip on the stage in the authoring environment. When dragged onto a movie clip the component is attached to
-
I created a report with 8 data fields; I added a 9th column and included a formula that provides a 'status' for a given line item based on the data pulled within the report. There are three seperate statuses; I then inserted a break which now sepera
-
Selective drill down based on particular values
Hi, I would like to know if it is possible to enable drill down only to certain values in a column and the other values in that column should not have the option for a drilldown(hyperlink should not be enabled). PS: dimensions are established correct