Cannot access "Configure User Directories"
Hi Gurus
I am getting this error " you do not have enough credentials to...." when i click on "Configure User Directories" on user management console.
hyperion shared services ver 9.3.1.
Could you help!!
Thank You
Kumar
Hi
I found and reported this fault on my post here...
http://discussions.apple.com/message.jspa?threadID=1084956
the workaround solution I found is also listed in this post in the thread
http://discussions.apple.com/message.jspa?messageID=5145624#5145624
Could you advise if it also solves your problem for others doing search for solution for this issue.
PS
Similar Messages
-
Hi there
My client has a laptop which won’t load the desktop when disconnected from the network. When you log on (while disconnected) you get the error
“Windows cannot access \\server\users\name\desktop”
Works as expected while connected to the network.
The server is a Windows Small Business Server 2003 with active directory etc. and roaming profiles turned on. This issue does not occur on other workstations/laptops.
When I check the Users folder on the local system drive there is not a desktop folder. I assume this is the issue although I’m not sure how you would force windows to create one or why one hasn’t been created?
This is a brand new laptop so my initial reaction was to reset the laptop to factory state and then add the laptop back in to the domain. After this process the issue was still present!
I guess the only thing I should mention is that this was shipped as a Home Premium laptop and was then upgraded to Professional using an upgrade key.
I have checked Control Panel, System & Security, System, Advanced, User Profiles and the account shows as Local with Roaming Profiles greyed out.
Any ideas?
Martyn Fewtrell
[email protected]
Martyn Fewtrell TNC (IT Solutions) Ltd Email: [email protected] Web: http://www.tncit.co.ukHi,
I am just writing to check the status of this thread. Was the information provided in previous
reply helpful to you? Do you have any further questions or concerns? Please feel free to let us know.
Regards,
Alex Zhao
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Alex Zhao
TechNet Community Support -
[Solved] Cannot access non-executable directories
After I copied some folders and files from CD I had permission denied trying to access as a normal user.
So I did
sudo chown -R doctor:users folder
sudo chmod -R 777 folder
After that, the folder and files became executable.
So, in directory Music/ I had some executable folders and files.
I thought I can make it all non-executable recursively...
sudo chmod -R -x Music/
And now it's non-executable.
But wait
[doctor@doctor ~]$ cd Music/
bash: cd: Music/: Permission denied
I cannot access non executable folders?!
After I make them executable again, I can access.
[doctor@doctor ~]$ chmod -R +x Music/
[doctor@doctor ~]$ cd Music/
[doctor@doctor Music]$
wtf?
Last edited by Doctor Drive (2010-09-15 12:55:44)Didn't get how it works though..
But a way to solve is
chmod -R 775 Music
And for files...
find ./Music/ -type f -exec chmod 664 {} \;
Though still didn't get why must folders have different permissions...
Too much to study that chmod thing...
Last edited by Doctor Drive (2010-09-15 12:55:18) -
I cannot access my /User/Dennis/Pictures folder from Bridge
I has the CS3 Suite, I am trying to see some files in the above path on my C: Drive, but for some reason I cannot access thru Bridge.
If I go to PS and choose File/Open then I can navigate to that folder and open files, but I really would liket to do so with Bridge so I can open images in Camera Raw.
I've checked all my folder settings I could think of to ensure access to all, but that did not make that folder even 'visible' in Bridge.
Any words of wisdom?
Thanks
DennisNo. I did pull some folders in from an external Raid drive onto
my C: \Users\Dennis which was already on my C: Drive forever.
There are 3 Folders under User, 1)Default, 2)Dennis 3)Public and the only one Bridge finds is the Public Folder. -
Photoshop not responding and cannot access my user information from home screen.
I have Photoshop 9 when I get the home page and click on the organizer a hour glass appears and the software stops responding. I have upgraded to plus members and it will not access my user infromation so I cannot use the benifits.
I assume you are talking about Photoshop Elements 9. If so try that fourm at http://forums.adobe.com/community/photoshop_elements
-
Cannot access primary user account - even with Install CD
I’ve been racking my brain trying to figure out how to solve a OSX problem for a friend that ran into some problems on his iMac. For some reason, he wasn’t able to log onto his user account – the only one on this computer. He didn’t try to change his password, but something strange must have happened.
We tried to reset the password with an OS X install disc, but I couldn’t even find, much less access his user account. Thanks to the help of some folks at the Genius Bar of an Apple store, we were able to log onto the Root account and create a new account. I tried t recreate the original user account, but the computer wouldn’t allow it, as that account was already being used. If that user account was still active, why wasn’t I able to reset it with an install disc?
I’ve rebuilt the volumes with Disk Warrior, and repaired permissions with Disk Utilities. I’m at a loss on how to deal with accessing the original user account, which has a lot of important data. I’ve copied the user data to an external drive, and I’m thinking I might be able to import various files – email data, photographs, and various documents, but I’m hoping there be an alternative to what seems like a tedious route. Other than using an install disc to reset the password to the user account it can’t seem to recognize, are there any other ways to gain access to this account?
My friend’s computer is a G4 iMac running, I believe, 10.3.9.There are several possibilities as to why a user account may
not be correctly available or a password to it reset to fix it.
One of them may be, if the short name of the computer or of
an account was changed by the user; and later the system
may appear different or changed, with some of the user acct
settings or preferences no longer as they were prior to that.
There is a way to create a new admin level user account and
then move the older user info into the new account; then go
in and delete the other one. I am not certain as to how to do
this; but the topic has come up in these discussions, and the
general path is about the same from Panther through Leopard.
A few details may be named different, but similar as things go.
• Mac OS X: *How to change user short name* or home directory name:
http://support.apple.com/kb/ht1428
• How do I change owner's name in my Mac:
http://www.askdavetaylor.com/howto_change_owners_name_applemac.html
While these kinds of details may not be behind the exact problem in
the computer in question, directory and user account issues do often
have similar causes. Often, they are user-caused events. If the general
Directory of information on the hard disk drive has a problem, the use
of a third-party disk tool such as Disk Warrior is usually advised. If that
were needed, usually more evidence across the system would appear.
There may be a way to use a Setup Assistant to recreate a new user
experience and start over with a new admin account and user name.
Then go into the system to ferret out the old user info.
+Sorry I can't be of more help; as I am being distracted by an elderly+
+person who can't figure out why I am online or what it means to be.+
Good luck & happy computing! -
Cannot access another users mailbox via OWA 2013
Hello
I have just migrated a few users from Exchange 2010 to Exchange 2013.
If I try and access their mailboxes via OWA 2013 using "open another users mailbox" I receive the following error:
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact your helpdesk.
X-OWA-Error: SDServerErr;Microsoft.Exchange.Data.Storage.AccessDeniedException
X-OWA-Version: 15.0.995.28
X-FEServer: EX2013
X-BEServer: EX2013.company.local
Date: 07/11/2014 11:23:46I can still access any mailbox on a 2010 server via the same method.
Can anyone assist in resolving this issue please?
MattHi Amy,
Yes Inheritance is enabled.
Just to clarify this is affecting ALL mailboxes once moved to Exchange 2013, not specific users.
There are multiple 2013 databases all with mailboxes on. Each databases is displaying the same behaviour.
Here are the permissions I have checked so far:
ADSI Edit: CN=Databases,CN=Exchange Administrative Group (<>),CN=Administrative Groups,CN=Company
,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=localnet
The AD group has inherited Full Control on all of the database objects.
EAC: The AD group has full control on every migrated mailbox
EMS: The AD group has the following permissions on all mailbox databases:
Identity User IsInherited Deny AccessRights
MDB01 Company\AD Group True False {GenericAll}
I have removed permissions for the group and re-added them, this has made no difference.
The only way I can access any of the migrated mailboxes is to explicitly grant my account "Full Access" via the Add-MailboxPermission command.
Regards
Matt -
Creat new admin cannot access old user accounts
i got a macbook running os x 10.6.8 i forget the admin account's password i created new administration account using command+s and typing following commands
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
now i can not access my old data i got 80 gb hard drive i can only access 6 gb of it how can i access my old user accounts and all of its data
thanks for help in advance
regards
hardeepDoes the old user account have the same name as before , or has it been changed to 'xyz (deleted)' ?.
If it has a usable name, just go to System Preferences - Accounts & create a new one with that exact name.
Click OK when "A folder in the Users folder already has the name 'account name'. Would you like to use that folder as the Home folder for this user account?" appears. Note: This will correct the ownership of all files in the Home folder, and avoid permissions issues with the contents
You can then logout & into the 'new' one.
If the name needs changing : follow https://web.archive.org/web/20130919225809/http://support.apple.com/kb/HT1428
rather than the current version at Apple
If you want to continue using the new account you've already made, but access the old folders :
Select the old account home folder in Finder, then use Finder - File menu - Get info (command I). Open the 'Sharing & Permissions' section at the bottom, then click the padlock icon at bottom right & authenticate with an admin name & password.
Click the + button & add your new account name to the list, then select it & change 'Read only' to 'Read & Write'.
Now click the gear icon at the bottom & choose 'Apply to enclosed items...' -
I need to access a website to read research papers. I use Win7, Firefox & have to allow cookies to enter.
I am denied access using my computer with valid user name and password but can get access using IE8 on a computer located elsewhere. What must I do to access this website on my machine?
Many thanks,
skepticMany site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Fix login issues on websites that require a username and password
*https://support.mozilla.org/en-US/kb/fix-login-issues-on-websites-require-passwords -
Cannot access configuration for cisco srp527w voice
I am trying to input my SIP configuration to the cisco srp527w voice set up but there is nothing there that I can input. All I can see is info, system, user 1 user 2. When I go to system, it ask for IVR user password...I tried using admin and cisco nothing change. Appreciate if some could help. thanks
Make sure you have filled out all of the HTTP/HTTPS credential data in DCR for these devices. RME will only use HTTPS to fetch VPN concentrator configurations.
-
TS2012: Cannot access Configure Report
Hello,
i installes TS2012 and LV2012 on a fresh system.
I tried to use my previous mode-sequence from TS3.5 and get lots of errors
One problem is that i cant acces the meno point Configure+Report-options any more. I get the attached error-popup.
(I need to set the report-settings to ascii)
Whats wrong here?
thx
Attachments:
Report.jpg 32 KBHi,
meanwhile the previous error in my first posting does not appear any more.
The model is executing up to the "TestReport Callback" and then the attached popup appears.
But when i go to the menue and click on Configure + Report Options then nothing happens.
Why is the report-options-form not opened/displayed?
(I found out that when i use the default Teststand2012-sequence-model then in the Configure-menue is the point "Result Processing" instead of "Result Options" when using my model.)
Thanks for help
Attachments:
ascii.jpg 22 KB -
Cannot access some user files in TM back ups
My wife and son are additional users on my Imac. I back up using TM. I recently opened the back up folders to see, and I see the folders with their name on them, but when I click to open them, a message pops up saying I don't have permission to see the contents. The question is, how do I make sure when I go to transfer their stuff to a new machine we will be able to open them? Thanks
implantguy wrote:
Then what happens when I plug the external HD to a new machine that has no user accounts set up in it yet?
if you mean, can you use those backups to set up a new Mac, the answer is YES. See [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of the +Snow Leopard > Installation and Setup+ forum).
All the permissions from the old Mac will be preserved on the new one; one user on the new Mac still won't be able to see the data belonging to a different user, unless specifically authorized. -
HT4798 How do I gain access to Users & Groups preferences when I cannot even log in.
I only have one apple ID linked and I cannot reset my password via the pop up box and cannot access the user groups as I cannot even log in.
Can anyone help.
Thanks
MattReset Password
OS X 10.6 Snow Leopard
Follow the instructions in second and third boxes.
Reset Password using Recovery HD
OS X 10.7 Lion /10.8 Mountain Lion
Follow the instructions in the first and third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
I don't remember my original (former) account password
https://support.apple.com/kb/HT1631 -
Profile.V2 - Cannot access
I'm sure this is a simple one:
I'm using Folder Redirection and Roaming Profiles.
In Active Directory I have set the users profile path as
\\servername\users$\students\%username%\profile Although the user's base folder exists it contains no subfolders whatsoever. When the user logs on for the first time folders such as AppData, Documents, Music, Pictures and Videos are created and so
is a Profile.V2 folder. However I (as the administrator) cannot access the contents of the Profile.V2 folder.
In Group Policy I have enabled the setting...
Computer Confiiguration\Policies\Administrative Templates\System/User Profiles\Add Administrators security group to roaming user profiles
...but I still cannot access this direcotry without taking ownership.
Do I need to create the Profile.V2 folder myself? I have Full permissions on the user's base folder and I can access all the other folders (AppData, Documents etc...) without problems.
Am I missing something here?
Matt Courtman, Network Manager, Cromwell Community College, UKYou cannot access other users’ profiles because of permission problems. Therefore you cannot use any of other users’ profiles.
This statement just states the original issue..and is by no means an answer or even an attempt at an answer.
We are experiencing the same issue.
Please forgive me if I'm repeating what has already been stated.
The condition occurs when the Profile.v2 folder on the file server is first propagated by the Windows 7 machine. eg. as the user logs off the profile.v2 folder is written to by as the profile is written back to the file server, the redirected folders
policy dictates what is written.. This works fine. The issue is that the folders and files which are generated by this process are owned by the user who is logged on to the Windows 7 OS. This user has ownership and full control of the folders and file. Administrators
or users defined in the root folder can not access the Folders and Files.
Taking ownership of the file structure and assigning the correct permissions to the structure, then reassigning the user ownership again resolves the issue. BUT this is a very inconvenient and labour intensive routine to have to undertake for each user post
their first logon.
Without performing the above action the users profile is not backed up or replicated at a file level to the DR site.
What I'm after is a supported Microsoft routine to rectify this issue. Ideally via group policy. To have to do this via a script is an ardouis task and presents the issue of how can we get the HelpDesk to perform this action. They are not domain admins nor
can they take control of the data structure in question. -
Hi I have been trying to install im on both of my solaris 8 and solaris 9 the second time and I made sure all the directories, packages and prodreg and productregistry files are cleaned up. However during configuration of instant messaging (JES 2004Q2), we encounter an error: PLEASE HELP
cp: cannot access /opt/SUNWiim/lib/imService_*.propertiesHere's the details of the directory structure and install log
bash-2.05# pwd
/opt/SUNWiim
bash-2.05# ls -l
total 3154
-rw-r--r-- 1 root root 23019 Nov 18 2003 License.txt
-rw-r--r-- 1 root root 526 Nov 18 2003 README.txt
drwxrwxr-x 2 root root 512 Sep 15 19:18 classes
lrwxrwxrwx 1 root other 31 Sep 15 20:00 config -> /etc/opt/SUNWiim/default/config
-rwxr-xr-x 1 root root 1533989 Apr 17 07:04 config.class
-rw-r--r-- 1 root root 2595 Sep 15 20:01 config_20040915195921.log
-rwxr-xr-x 1 root root 18187 Apr 17 07:01 configure
-rw-r--r-- 1 root root 93 Apr 17 07:01 copyright
drwxrwxr-x 5 root root 1024 Sep 15 20:00 html
-rw-r--r-- 1 root root 33 Apr 17 06:27 iim.version
-rwxr-xr-x 1 root root 4139 Nov 18 2003 install_locale
drwxrwxr-x 2 root root 1024 Sep 15 20:00 lib
drwxrwxr-x 2 root root 512 Sep 15 19:18 sbin
-rwxr-xr-x 1 root root 7605 Nov 18 2003 uninstall_locale
bash-2.05# cd lib
bash-2.05# ls -l
total 7412
-rw-r--r-- 1 root root 138666 Apr 17 06:26 CfgResources.properties
-rw-r--r-- 1 root root 189363 Apr 17 06:26 ImResources.properties
-rw-r--r-- 1 root root 294 Nov 18 2003 charset.properties
-rwxr-xr-x 1 root root 9372 Apr 17 07:01 execdaemon
-rw-r--r-- 1 root root 5495 Apr 17 06:27 iim.conf.template
-rw-r--r-- 1 root root 3866 Nov 18 2003 imService.ldif
-r--r--r-- 1 root root 1171 Nov 18 2003 imService.properties
-rw-r--r-- 1 root root 17402 Nov 18 2003 imService.xml
-rw-r--r-- 1 root root 460 Nov 18 2003 imServiceCheckTemplate.xml
-rwxr-xr-- 1 root root 11051 Sep 15 20:00 imServiceConfigure
-rw-r--r-- 1 root root 16868 Nov 18 2003 imServiceRequestTemplate.xml
-rw-r--r-- 1 root root 7820 Nov 18 2003 imidentity.jar
-rw-r--r-- 1 root root 37827 Nov 18 2003 ldapfilt.jar
-rw-r--r-- 1 root root 268268 Nov 18 2003 ldapjdk.jar
-rw-r--r-- 1 root root 99600 Nov 18 2003 ldapsp.jar
-rw-r--r-- 1 root root 241800 Apr 17 06:28 libasock.so
-rw-r--r-- 1 root root 985712 Apr 17 06:28 libasync.so
-rw-r--r-- 1 root root 797092 Nov 18 2003 libcyrus.so
-rwxr-xr-x 1 root root 16286 Apr 17 06:27 libsetupSDKJNI.so
-rw-r--r-- 1 root root 659528 Apr 17 06:28 libyasr.so
-rwxr-xr-x 1 root root 170480 Apr 17 07:01 multiplexor
bash-2.05# -----here's the full install log------
bash-2.05# more config_20040915195921.log
Basic Install Successful: doing post installation setup and configuration
Instant Messaging Server: Setting Instant Messaging Server configuration file options
Server configuration file "/etc/opt/SUNWiim/default/config/iim.conf" created
Instant Messaging Server: Configuring Instant Messaging Server system startup scripts
Created system startup script "/etc/init.d/sunwiim"
Instant Messaging Server: Configuring Instant Messaging Server to start on system bootup
Instant Messaging Server: Setting Instant Messaging Server directory and file permissions
Instant Messaging Server: Starting Instant Messaging Server
Instant Messaging Server: Product Installation Completed: creating product uninstaller
Checking for IM and Presence Services...
Generating /tmp/im_check.xml .
Done.
Removing existing IM and Presence services LDAP schema ...
Success.
Adding IM and Presence services LDAP schema ...
modifying entry cn=schema
modifying entry cn=schema
modifying entry cn=schema
modifying entry cn=schema
IM and Presence services LDAP schema added successfully.
Importing IM and Presence Services Identity Server Schema...
Success.
Adding IM and Presence requests...
Generating /tmp/im_requests.xml .
Importing /tmp/im_requests.xml to Identity Server.
Organization: dc=mydomain,dc=com
Registered services:
SunIM
Organization: dc=mydomain,dc=com
Create service templates:
SunIM
Organization: dc=mydomain,dc=com
Registered services:
SunPresence
Organization: dc=mydomain,dc=com
Create service templates:
SunPresence
Organization: dc=mydomain,dc=com
Create Roles:
Organization: dc=mydomain,dc=com
Create service templates:
SunIM
Organization: dc=mydomain,dc=com
Registered services:
SunPresence
Organization: dc=mydomain,dc=com
Create service templates:
SunPresence
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM Regular User,dc=mydomain,dc=com
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM Administrator,dc=mydomain,dc=com
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM News Administrator,dc=mydomain,dc=com
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM Conference Rooms Administrator,dc=mydomain,dc=com
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM Allow User Settings Role,dc=mydomain,dc=com
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM Allow Send Alerts Role,dc=mydomain,dc=com
Organization: dc=mydomain,dc=com
Create Roles:
cn=IM Allow Watch Changes Role,dc=mydomain,dc=com
Success 0: Successfully completed.
Success.
Copying property file to /opt/SUNWam/locale ...
Done.
Assigning IM and Presence services to existing users ...
modifying entry uid=amAdmin,ou=People,dc=mydomain,dc=com
modifying entry uid=anonymous,ou=People,dc=mydomain,dc=com
modifying entry uid=authlessanonymous,ou=People,dc=mydomain,dc=com
modifying entry uid=testportal,ou=People,dc=mydomain,dc=com
Done.
cp: cannot access /opt/SUNWiim/lib/imService_*.properties
bash-2.05#this is harmless. It happens if you do not install any non en language.
Maybe you are looking for
-
HP Officejet Pro 8500 A909g new ink levels drop to less than half after few pages.
Installed all new HP940 ink cartridges and the levels dropped to half after only printing less 12 ink defective pages. Quality Diagnostics Page shows colors but black ink does not show up at all. Self Test Diagnostic page shows printhead status is g
-
I want to display an image (.jpg) in a JFrame. How? I'm using Containers and setBounds for the JButtons in the JFrame.
-
Hi, How can create target blank (new page open) button click. please help me
-
Problem while installing Oracle 9i (9.2.0.1.0)
I think I've gotten past most of it. I'm now at the OUI's Configuration Tools installation window. It's been trying to install the Oracle Database Configuration Assistant for the past half hour. The status for that item says "in progress...", and the
-
Working in FCE HD. I am working on a large project (16 minutes long, over 200 pictures and videos). Whenever I add a still picture, transition or a movement to picture, it requires re-rendering that picture. Sometimes it takes 10 to 15 seconds per pi