Cannot access Crystal Reports after adding SP1

On a new install of Crystal Reports 2008 I downloaded and added SP1 (cr121_clickonce.zip) to try to update my .NET to the new version of Crystal.  I now get the error message:
The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll.
I also added the update from 'cr120_redist_install.zip'  which will allow my users to access the .NET files and programs they need.  (This I did only on one machine to test its success)
I am sure it is a case of inexperience but can you help me get back in business with Crystal Reports 2008

Hmmm, "... I downloaded and added SP1 (cr121_clickonce.zip)"
That file is not the SP 1 download. Sp 1 is here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
So. At this point, I'm not really clear as what has been done and why.
E.g.; "...I downloaded and added SP1 (cr121_clickonce.zip) to try to update my .NET to the new version of Crystal"
- this sounds kinda muddled up...
And this: "I also added the update from 'cr120_redist_install.zip' which will allow my users to access the .NET files and programs they need. " also does not sound right.
I'd recommend uninstalling CR 2008 on your development system. Reinstall and then Apply SP 1 from the above link. This will update you to CR 2008 SP1 on the development computer.
Now, if you are then trying to deploy a .NET app to a client, use the MSI from here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
or you can build your own deployment project using the msm from here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
Ludek

Similar Messages

  • User cannot access Crystal reports after user was deleted and recreated

    We are using Crystal Enterprise XIr2.  We are using Windows AD authentication.  We had an issue with a user where they were deleted in Active Directory.  Now they can no longer run Crystal reports.  When I go into the CMC and open users I see this user.  When I try to open this user I get the following error
    There was an error while retrieving data from the server: Active Directory Authentication failed to get the Active Directory groups for the account with ID "8B003DF11D45B244AC3B61AB36B6C445:ALLENDG". Please make sure this account is valid and belongs to an accessible domain.
    I think Crystal is still trying to access the user's old Active Directory account.
    I cannot delete the user either in CMC.
    Is there someway I can correct this user.
    Thanks
    Adam

    Arjun - Thank you for your help.  I looked in Central Management Console but I could not find what you indicated.
    CMC--> Public Folder --> Administration Tools
    In administration tool, there are two objects
    1) Update Windows AD Group Graph
    2) Update Windows AD Group Graph and Aliases --> Right click on this Report and click on RUN Now.
    I ended up deleting the records for this user in these SQL tables and then user could access InfoView
    CMS_Aliases5 (2 records for this user)
    CMS_InfoObjects5 (1 record with both aliases)

  • Crystal Report Server 2008 SP1 redistributable printing problems

    I'm trying to print from a asp .net form after recently installing the Crystal Report Server 2008 SP1 redistributable.
    When I click on the print button it brings up a empty messagebox with 'csprintdlg' in the title in IE7.
    My installation on the Windows2003 is slighty different since my Inetpub\wwwroot folder is located on the D: drive.
    The previous installer, included the aspnet_client\system_web\2_0_50727\crystalreportviewers12
    on the C: drive but this one did not. I copied the folder from another server with just the initial version of the redistributable, everything works except printing.

    Using [Fiddler|http://www.fiddlertool.com/fiddler/] on the client web browser machine will give you a clearer idea of what's amiss on the server.
    It's a starting point for tracing back to what's missing or being denied on the server.
    Following that, [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx] on the server is useful for hunting for missing components or permissions issues.
    Sincerely,
    Ted Ueda

  • After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

    After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

  • Slow Reports after adding calculated item

    Hi All,
       I am facing a slow response after adding few calculated items in a report. Is it a normal behavior of OBIEE in terms of adding calculated items?
    Anyone faced similar issue please comment.
    Thanks,
    Muhammad Waqas

    Hi Muhammad Waqas,
    Have you run the physical query that is generated by BI Server on Database? Once executed on database, compare the execution time with OBIEE execution times, with this you will get the answer.
    Depends on the amount of data and the type of calculation, it is normal behaviour to slow down the performance of the reports after adding calculated measures.
    Please mark it Helpful/Correct, if it is.
    est Regards,
    Kalyan Chukkapalli
    http://123obi.com

  • Users cannot access removable devices after you enable and then disable a Group Policy setting in Windows 7 64 Bit

    Users cannot access removable devices after you enable and then disable a Group Policy setting on Windows 7 64 bit machines.
    on the 32 bit machines I was able to apply this hotfix
    http://support2.microsoft.com/kb/2738898
    But it will not install on 64 bit machines. 
    Is there a hotfix for 64 bit?  If not, what is the work around?
    Thanks!
    Robert

    Select "Show hotfixes for all platforms and languages", then download x64 hotfix:
    Please take a moment to Vote as Helpful and/or Mark as Answer where applicable. Thanks.

  • Accessing Crystal Reports XI from ASP

    Post Author: cutedude43
    CA Forum: General
    I need to access Crystal reports from ASP. The catch is Crstal Reports XI is not installed on the web server where the ASP application is hosted. However there is another machine where Crystal Reports XI is installed. Can you please let me know, in detail, how I could view crystal reports through the ASP application under this scenario. If this is possible please also detail the required run time files that needs to be deployed on the web server where the ASP application is hosted.
    If this is not possible, please detail the other ways through which I can invoke the crystal report from my ASP application page.
    Thanks
    Vaidyanathan

    The only code you will find on this web site is for VB 6. I have a few C++ apps. Not knowing a thing about flex, I am not sure if either of those will be of any use to you(?). Other than that, see if you can find some flex forum and ask there...
    Ludek

  • Cannot access my Ipad after downloading latest download.  It wont accept my password.

    I cannot access my Ipad after downloading latest download.  The Ipad wont accept my password.  What can I do?

    Try the following:
    1. Restore:
    http://support.apple.com/kb/HT1414
    2. Recovery:
    http://support.apple.com/kb/HT1808

  • "Site System Status Summarizer still cannot access storage object" after DB Move

    After our SCCM server was up and running, the DBAs moved the SQL Site Database to a new drive which is a supported SQL Operation according to this Support document:
    https://support.microsoft.com/en-us/kb/2709082
    Using the methods described by the above document we were able to restore functionality to SCCM but I am still seeing Informational messages in the SMS_SITE_SYSTEM_STATUS_SUMMARIZER component.
    Site System Status Summarizer still cannot access storage object "\\<SQLServer>\S$\SMS_<SQLServer>" on site system "\\<SQLServer>". The operating system reported error 67: The network name cannot be found.
    Possible cause: The site system is turned off, not connected to the network, or not functioning properly.
    Solution: Verify that the site system is turned on, connected to the network, and functioning properly.
    Possible cause: Site System Status Summarizer does not have sufficient access rights to connect to the site system and access the storage object.
    Solution: Verify that the accounts are properly configured to allow the site to connect to the site system and access the storage object.
    Possible cause: Network problems are preventing Site System Status Summarizer from connecting to the site system.
    Solution: Investigate and correct any problems on your network.
    Possible cause: You took the site system out of service and do not intend on using it as a site system any more.
    Solution: Remove the site system from the list of site systems used by this site; this list appears under Site Systems in the Configuration Manager Console.
    Possible cause: You accidentally deleted the storage object or took the storage object out of service.
    Solution: The components will eventually detect that the storage object no longer exists on the site system and will either recreate it or choose a new storage object. Monitor the status messages reported by other site components to verify that this
    occurs properly.
    The storage object has been inaccessible since "14/03/2015 1:23:20 AM". When you correct the problem and Site System Status Summarizer successfully accesses the storage object, Site System Status Summarizer will set the storage object's status
    to OK, providing that the storage object has sufficient free space.
    I have run a site reset to try and fix this but the site server still seems to be trying to access files on the old drive. Is there a method to get SCCM to start looking for these files on the NEW DB drive (H$) in my case?

    Was a site reset performed at all yet? This has to be done. 
    Torsten Meringer | http://www.mssccmfaq.de
    Yes, I tried a site reset prior to making this post. I was sure I had read that this should resolve the issue but unfortunately it seems a site reset did not resolve the issue.
    Since we are running a virtualized environment, is it possible the old drive has to still exist prior to running the site reset? If we add a small "S" drive back to the server and run the site reset again, might that help?

  • Cannot View Crystal Report Outside Company (Red X)

    I just publsihed a website to the web and when I try to run the crystal report from the net I get a red x. Internally it works fine. I copied the Virtual directories from the default website to my extranet site. E.G. Crystalreportsviewer115 and businessobjects.
    I use recrystalize which creates the .asp pages with parameters and uses active x plugins. I do not get prompted for the active x plug in outside the company.  Any help would be much appreciated.
    Jerry Kane

    Appreciate the response. I tried your first article in regards to dynamic images with no luck. I was a bit confused on granting access to the C:\Temp folder with an asp account. I cannot find the asp account is it a network account? Is it listed in AD?
    - just right click on the temp folder (C:\windows\temp). Choose properties and then go to the Permissions tab. Add the ASP net worker process and give it full control.
    I did create a new web.config file. When you say comment out do you mean remove? If so that is what I did. Nothing has changed. I am running XI R2.
    - can you give me the specific page(s) you are refering to?
    Ludek

  • Cannot access web console after install.

    Hi all.
    The last day has been my first encounter with Oracle VM and it seemed to go fine until I finished. I have installed the latest VM and management tools on a bare bones machine (spec below) but cannot access the console via http://machine:8888/OVA.
    I have tried installing using https and without and can gain access to neither the https 4443 or the http 8888 yet I can ssh into it quite easily. The dmesg only really complains that there are no ipv6 routers (understandable) but the xend.log in /var/log/xen does show something strange at the bottom:
    [2011-07-13 16:04:45 3011] DEBUG (XendDomain:452) Adding Domain: 0
    [2011-07-13 16:04:45 3011] DEBUG (XendDomain:386) number of vcpus to use is 0
    [2011-07-13 16:04:45 3011] INFO (SrvServer:177) unix path=/var/lib/xend/xend-socket
    [2011-07-13 16:04:45 3011] DEBUG (XendDomainInfo:1727) XendDomainInfo.handleShutdownWatch
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_device not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VBD.set_type not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: session.get_all_records not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_record not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: event.get_all not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.get_network not found <------ ?????
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_device not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MAC not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: VIF.set_MTU not found
    [2011-07-13 16:04:45 3011] WARNING (XendAPI:695) API call: debug.get_all not found
    The spec of the machine started out as:
    Athlon 64 x2 3600+
    4Gb Ram
    2 Nics (1 built in Broadcom & 1 Intel MT)
    1 NVidia super duper gt9500
    3 Hard Disk, (1 IDE 150gb , 1 SATA 80 & 1 SATA 150 - the IDE is master boot with system on it)
    After a few attempts, I removed Video and the Intel card.
    The install was done via CD and never complained and in this last install, it only had 1 NIC to choose for the management console.
    On this last install I also chose top use none https and therefore the system says I should gain access via http://machine:8888/OVA
    I do notice though that in some tutorials, it states alternatives to OVA like OVS etc, all of which I have tried.
    Oh and if I netstat -an, it shows it's listening on port 8888.
    many thanks, I'm guessing it's some a bit silly that I've over looked but from the way I read the install instructions, you only need the VM and the management Disks to install and you should be able to access via web console?
    BTW, systems I'm using as clients to access range from, opera, firefox (Soalris), ie 6,7,8 & 9 from Windows and Windows server. All I get is Internet Explorer Cannot Display This Page.
    many Thanks, Mark

    Did you install the VM Manager software as a VM hosted by OVS? Make sure the VM is running. It is probably named something like OVM_EL5U4_X86_OVM_MANAGER_PVM. Use "xm list" on the OVS server to see which VMs are running.
    If it's not running, then run "xm create /path/to/vm.cfg" the path is probably something like /OVS/running_pool/OVM_EL5U4_X86_OVM_MANAGER_PVM/vm.cfg
    Jim

  • Cannot export crystal report in excel format from crystal report viewer

    This problem occurs on only one workstation.
    Open Advanced Reports > Enter workorder # > Click on 'workorder work(uninvoiced)' > Work order opens.
    Click on icon "Export report"
    Save as type: change to .xls
    Error: Crystal Report Windows Forms Viewer. Error in file
    SAP.......rpt:
    Error detected by export DLL:
    Export failed.

    Try adding c:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86 to your windows enviroment variable PATH then restart.

  • Cannot access address book after software update

    I am unable to access the default address book after doing the software update - I restored my backup and everything is there except for my contacts.  When I open my address book it is labeled personal and there are no addresses and when I add a contact it does not show up, but I noticed when I go into options it shows only default under address books with 99 entries and when I try to add a contact it does not show in the list on my phone but the number of entries in the default book goes up so they are going into that one but I cannot access it?  Any idea how I can get my contact list back? (hope this makes sense to someone )
    Thank you
    Solved!
    Go to Solution.

    Sdgardne, thank you so much! Using your post and links I was able to restore my address book after upgrading my software and having trouble with my address book. And I am very technologically challenged so I appreciate having something I could understand and follow.

  • Detail sections not displayed with Crystal Reports 2010 Runtime (SP1 also)

    I have migrated a VB app from RDC 9 to Crystal Reports 2010 and I'm experiencing a very strange issue.
    In a report with 6 nested groups, the detail part is splitted in 7 section, and the whole detail has the "keep together" flag activated. At runtime, some detail sections are not displayed. There is no suppress condition on the detail section. The missed sections are those near bottom of the page. I suppose that when there is no room to print the section on the page and it should go on the next page, Crystal forget to display it.
    I exported the report in Crystal format and reopened with Crystal Reports designer and the missed section are displayed.
    The same report is displayed correctly using RDC 9.
    If I show the group tree and select the missed section group, the section is correctly displayed on a separate preview page.
    I've some screenshot to better demonstrate the problem.
    I hoped SP1 will resolve the issue but unfortunately it didn't.
    Pier Alberto Guidotti

    This issue has been escalated for a fix. tracking number is TE5000325237. For anyone wanting to attach to this thread with a similar issue, please note the behavior as decribed in the TE below. If the description does not match your issue exactly, please create a new thread.
    Description - Steps to Reproduce;
    1) Run the report in the CR 2008 designer - note the second page
    2) Run the report in VS2010 app using CRVS2010 SP1:
    CrystalReportViewer1.ReportSource = <path to report>
    3) Look at page 2 and compare to page 2 from the CR2008 designer (also, see attached compare.jpg file which is a screen shot of both views) - note missing group on page 2
    4) Export to PDF, DO, RTF - same issue
    5) Print to printer using the viewer print button - same issue
    6) Same issue print to printer using code:
    Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
    crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
    crReportDocument.PrintToPrinter(1, 1, 1, 2)
            MsgBox("Done")
    7) Same issue print to printer using code:
    Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument()
    crReportDocument.Load("C:\Crystal\Test\Forum tests\Alberto missing detail section\Crystal Issue\Distinta di Taglio CR 2010.rpt")
    Dim rcd As ISCDReportClientDocument
            rcd = crReportDocument.ReportClientDocument
            rcd.PrintOutputController.PrintReport()
            MsgBox("Done")
    8) Export to RPT file format - view this export in the CR2008 Designer - report looks as it should
    9) Add report to the .NET2010 project. trying to view the repor tin the .NET2010 IDE results in .NET crashing.
    - Ludek

  • Cannot import Crystal report to a CA DB

    Dear All,
    Our client has a Crystal report. When we import it to CA DB, we got an error: SAP B1 was not able to import the following report / layout.
    When we run the report from Crystal report >> add-ins >> SAP b1 >> preview in SAP B1, we can preview it no problem.
    We import the report to their US DB, it works fine.
    We import the report to a test CA DB we created long time ago, it works fine. This means, it is not a localization issue.
    I have another Crystal report, I cannot import to the CA live DB too.
    Since I am using manager user (super user and have pro license), it will not be a user authorization or license issue.
    Is there anything wrong with their DB? Should I log a support message to SAP? I am not too sure if this is a support issue. Thanks in advance.
    Regards,
    Yuka

    Please re-post if this is still an issue but first update to CR4E 2 and retest

Maybe you are looking for