Cannot access InDesign 7
First off I had no clue there was InDesign 7 but I have a file from another computer/user and it's InDesign 7. I'm a monthly subrsciber and my InD is up to date, however, I can't open the file. When I look at the details of the file, it says it's 6.0 but the error box says it cannot open it because it was built in 7. I went on adobe.com and I can't get to any files that say 7.
Help! I need to go to print on this file today
There is no conflict installing Adobe InDesign CS6 and InDesign CC. If you are a Mac User, and you installed Adobe InDesign CC through Adobe Creative cloud then the location of InDesign App is in
Applications -> Adobe CC folder -> Adobe InDesign
Similar Messages
-
Cannot access Adobe Folio Builder using Indesign (CS6) on Windows 7, error message is 'An error has occured while trying to sign in to the Folio Builder Panel' [IMS_ERROR_FAILURE]
Yes, I can open the DPS portal via the Folio Builder panel within InDesign. Although I have created Folios locally within InDesign CS6, the DPS portal is empty and everthing greyed out with just the text "There are no folios to display. Create folios with the folio builder in InDesign".
If I try to sign in within the Folio Builder panel in InDesign, I get the error message [IMS_ERROR_FAILURE] . In addition I am also not able to access the "Help" menu from within InDesign although I am connected to the internet.
To complicate it even further, I am working in the UK whereas all internet control (firewall) and licences are handeled by head office in Germany. I am not sure if this is a firwewall issue or not but if the IT department in Germany could get support from Adobe to understand the access requirements, this may help.
Hopefully using the forum someone out there will know the answer. -
I have downloaded both apps and the cloud does not give me an option to launch or use the applications. When I click on the name of either app, it brings me online where it says 'download now'. When I click on this, it brings me back to the cloud (where it says I have already downloaded it). It brings me back and forth and I cannot access either app in order to use it.
The applications aren't in the cloud, they are on your hard drive.
If you've downloaded the apps, they will be installed where applications are always stored on your computer. You didn't tell us what operating system you're using. If you are using a Macintosh, they will be installed into you Applications folder. Just launch them from there. -
Cannot access Photoshop CC (2014) since last major update
Since the new update, I cannot access Photoshop CC (2014). I always receive a Window message:
WER3D83.tmp.hdmp.
I have no problem with Illustrator and InDesign, only with Photoshop CC (2014).
Should I uninstall the app and install it again? Good thing I still have an older version, but would prefer to use the new one.
I'm working on an important project, don't really have time to investigate. Any hep would be appreciated.
Thank you.Hi MonArtCanadian,
Please go ahead with the uninstall and then install the application using the direct download:
Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
Regards,
Sheena -
Cannot access toolbars or palettes
I am fairly new to InDesign but formerly used Pagemaker quite a bit. About six months ago, I created a publication in InDesign and found that it worked very well. However now when I try modify this document or create new ones, the software will not allow me to access any of the attributes on the toolbars or palettes. I can select the text and modify it with a right click to choose the font or size but none of the styles I created are accessible.
I have tried uninstalling and re-installing the software and getting the upgrade to CS 5.5. The problem is the same with new documents or documents I have created before. The styles are listed but I cannot access anything on the palettes or the toolbars.
Has anyone had this problem? I know there is probably an easy fix that I am just not aware of.I assume you're on Windows 7 or Vista and have set your fonts to display at 150%. Either set it back to 100% or turn Aero off.
This is a known issue:
http://kb2.adobe.com/cps/403/kb403039.html
Bob -
Error: Sorry, your account cannot access the Adobe Digital Publishing Suite
A few days ago I ordered Creative Cloud account. Since that when I try to log in into Folio Producer I receive this message:
Sorry, your account cannot access the Adobe Digital Publishing Suite. Please contact Customer Support for help.
At the same time I do can log in into Folio Builder in my InDesign CS6 and even add folios. Might be this error by someway linked to that I had in the past DPS Pro account?
Thank you in advance.This issue does not have solution. I came up to DPS developing team, anyone does not want to fix manually each account and they do not have an automatic solution.
-
I cannot download Indesign as It says I need admin roights I have admin rights i have windows 8
I cannot download Indesign as It says I need admin roights I have admin rights i have windows 8
Does Windows 8 still use User Access Control? Try turning it off temporarily.
-
Cannot access PANTONE libraries
Hi there....I'm running Indesign CS5, and my OS has recently been upgraded to Yosemite. I cannot access the PANTONE swatch libraries any more...what gives? Help!
See Replace Your Preferences
-
When i login with microsoft account cannot access with administrative share c$
i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2 -
Cannot access my Iphone 3gs after upgrading to 5.01
Hi,
I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week
TillI connected my Iphone to ITunes and they notify me I needed to upgrade my
Software and I accept.
That was the mistake I made as it upgraded to 5.01 and I cannot access
myphone. When I put on my phone I am getting the activation screen. I try completing the activation but with no success. When I connect my phone to USB and start Itunes I am getting error message
"There is no Sim card installed in the Iphone your are attempting to
activate"
I tired the following with no success.
Itried downgrading from 5.01 to 4.33 by downloading firmware from google. Holding shift button and clicking restore onITunes, selecting the firmware but I am getting error message" Iphone“Iphone” could not be restored. An unknown error occurred (3194)
I also tried using RedSn0w program and Tiny Umbrella and no luck at all.
Please help.
Thanksyou,
Charles.Is the SIM that is installed from the carrier the device is locked to?
Was the device hacked or jailbroken? Possibly to unlock the device? -
Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.
Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers. -
I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.
It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT -
Access to SSO login when client cannot access port 7777
We have a situation in which some of our users are behind internet firewalls that only allow access to port 80.
I already have the middle tier/portal using port 80 but SSO is using 7777. Is there an easy way to make sign on available via port 80?
IMPORTANT: Both infrastructue and middle tier on are the same windows server.
Thanks.
Message was edited by:
swassocHi Doung,
I tried you method and after failed some times i found out;
inside the dads.conf
database string : localhost: 1521:ORCL ....
but when you want to loggin on your web browse, you cannot use 1521.
you need to use 7777
http://localhost:7777/pls/apex
it worked!
But I cannot access the admin page as what the manual said use the same method:
http://localhost:7777/pls/apex_admin
It said the page was not found???????????????
And I don't know how to login to the apex.
I typed in I think the right infromation:
workspace: orcl
user name: ADMIN
password: oracle( and I know it is right)
but I cannot login.
Andy idea? -
Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
bei System.Windows.Forms.Control.NotifyEnter()
bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.IO.UnmanagedMemoryStream.ReadByte()
bei System.IO.BinaryReader.ReadByte()
bei System.IO.BinaryReader.Read7BitEncodedInt()
bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
bei System.Reflection.RuntimeParameterInfo.get_Name()
bei System.Diagnostics.StackTrace.ToString(TraceFormat)
bei System.Environment.GetStackTrace(System.Exception, Boolean)
bei System.Exception.GetStackTrace(Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString(Boolean, Boolean)
bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adilDo you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
Maybe you are looking for
-
FileSelectPopup window on wrong monitor
Hello all, My application is used for display testing and calibration purposes. On the PC where my application is running, the second DVI output is attached to the display to be tested. The second display is driven by enabeling the "Extend my Windows
-
Hi All I have one SAP query which collects data from VBRK, VBUK, VBPA,, VBRP, VBFA and KONV tables. Some times it is taking a lot of time. How can I improve the performance of this query.
-
I want to learn latest Java Programming
Hello, I learned Java programming in 2006 in India. I am a student of NIIT and completed Diploma in IT. Right now, I am SEO Manager in leading IT company. I want to restart my java study at my own. So, How can I learn latest Java programming? If you
-
Hi all, I need to create a Check List for BW codification. This will help the programmers if they are doing good work. Somebody can give a list of "good practices" in BW for build this BW check list? Thanks in advance!
-
It is the little things...too cool
With all the bad stuff, what cool things have you noticed about the iPhone? For instance, I just noticed that the Calendar on the home screen actually reflects the real date. I like that when you rotate the picture actually rotates (as opposed to the