Cannot access IP

We have recently refreshed our test system and when I try to access ip>Start wizard I get a log on window, then when I enter my user name and password it says that I am unauthorized. Normally, this log on window is not present, when you click on the Start Wizard button it goes straight into the IP Workbench. Please help,
many thanks,
David

This is strange...check for host entries in your system and also for authorization on IP.
Check for JCO auth...(BASIS will do that)
[Troubleshooting SAP Java Connector (JCo) |https://wiki.sdn.sap.com/wiki/display/EP/TroubleshootingSAPJavaConnector%28JCo%29]
Also check these auth object:
S_RS_ALVL: Authorizations for working with aggregation levels
S_RS_PLSE: Authorizations for working with planning functions
S_RS_PLSQ: Authorizations for working with planning sequences
S_RS_PLST: Authorizations for working with planning function types
S_RS_PLENQ: Authorizations for maintaining or displaying lock settings
Hope it helps...
Regards,
Ashish

Similar Messages

When i login with microsoft account cannot access with administrative share c$

i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1

yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2

Cannot access my Iphone 3gs after upgrading to 5.01

Hi,
I bought an unlocked Iphone 16BG 3Gs from eBay. I used it for a week
TillI connected my Iphone to ITunes and they notify me I needed to upgrade my
Software and I accept.
That was the mistake I made as it upgraded to 5.01 and I cannot access
myphone. When I put on my phone I am getting the activation screen. I try completing the activation but with no success. When I connect my phone to USB and start Itunes I am getting error message
"There is no Sim card installed in the Iphone your are attempting to
activate"
I tired the following with no success.
Itried downgrading from 5.01 to 4.33 by downloading firmware from google. Holding shift button and clicking restore onITunes, selecting the firmware but I am getting error message" Iphone“Iphone” could not be restored. An unknown error occurred (3194)
I also tried using RedSn0w program and Tiny Umbrella and no luck at all.
Please help.
Thanksyou,
Charles.

Is the SIM that is installed from the carrier the device is locked to?
Was the device hacked or jailbroken? Possibly to unlock the device?

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP!

I copied a lot of photos from an iphone to a DVD using a Windows 7 laptop, now I cannot access those photos on the DVD. HELP! In Windows Exlporer I can see the data on the disk in the details but when I click on it nothing appears as if there is nothing on it.

It should. So they aren't shown in the Last Import smart album, right? Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

Access to SSO login when client cannot access port 7777

We have a situation in which some of our users are behind internet firewalls that only allow access to port 80.
I already have the middle tier/portal using port 80 but SSO is using 7777. Is there an easy way to make sign on available via port 80?
IMPORTANT: Both infrastructue and middle tier on are the same windows server.
Thanks.
Message was edited by:
swassoc

Hi Doung,
I tried you method and after failed some times i found out;
inside the dads.conf
database string : localhost: 1521:ORCL ....
but when you want to loggin on your web browse, you cannot use 1521.
you need to use 7777
http://localhost:7777/pls/apex
it worked!
But I cannot access the admin page as what the manual said use the same method:
http://localhost:7777/pls/apex_admin
It said the page was not found???????????????
And I don't know how to login to the apex.
I typed in I think the right infromation:
workspace: orcl
user name: ADMIN
password: oracle( and I know it is right)
but I cannot login.
Andy idea?

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Error on load: System.IO.IOException: The process cannot access the file : error in event viewer when users want to view documents from this third party deployed scan solution

Error on load: System.IO.IOException: The process cannot access the file
'\\server1\SCANSHARED\.pdf' because it is being used by another process.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
   at System.IO.File.WriteAllBytes(String path, Byte[] bytes)
   at abc.Scan.Layouts.ICC.Scan.View.Page_Load(Object sender, EventArgs e)
I faced this error in event viewer when users want to view documents from this third party deployed scan solution
here I have two WFS servers and they configured with load balancing in F5 .
when I enable both servers in F5 I receive this error messages in 2nd server,
when users want to view documents
adil

Do you have antiVirus installed on the sharepoint servers?
These folders may have to be excluded from antivirus scanning when you use file-level antivirus software in SharePoint. If these folders are not excluded, you may see unexpected behavior. For example, you may receive "access denied" error messages when files
are uploaded.
Please follow this KB and exclude the folders from Scanning.
http://support.microsoft.com/kb/952167
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Windows 7 pro client cannot access folders on server 2003 domain server

I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
I get the following "access denied" message:
[…folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The user name could not be found.
Strangely enough...
The windows 7 client
can open shared folders that reside on the XP clients in the domain
All the XP clients in the domain can access the server 2003 folders
All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
The windows 7 client can ping the server 2003 machine and vice versa
I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
by a recent windows update.
Here is what I have done/verified so far on the windows 7 client:
In advanced sharing settings for Home/Work, Public and Domain profiles:
network discovery is enabled
file and print sharing is enabled
use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
40 -56 bit encryption is enabled
In “gpedit.msc” Local Policies/Security Settings:
enabled the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
disabled the following policies:
Network access: Restrict anonymous access to Named Pipes and Shares
Network access: Do not allow anonymous enumeration of SAM accounts
Network access: Do not allow anonymous enumeration of SAM accounts and shares
What am I missing? Are there policies on the server that need to be adjusted?
Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

SharePoint Designer 2013 cannot access workflows in Office 365 Site

I have an Office 365 SharePoint site with a number of workflows that I have created on my machine with SPD 2013. After a number of weeks I was unable to access the workflows from my machine through SPD (while still being able to access pages, site assets
etc.), getting the following error: (Am restricted from submitting images)
"Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities"
Restarting SPD doesn't help, after clicking OK I get the "SharePoint Designer cannot display the item" screen, prompting me to refresh.
When I do refresh, I get the following:
"Windows Workflow Foundation, part of .Net Framework 3.0, must be installed to use this feature"
This is happening on my machine, Windows 7 64 Bit, SPD 2013 64 Bit, but on a colleague's machine, Win 7 64 Bit, SPD 2013 64 Bit I can access the workflows.
I get the same error if I try to create a new Workflow on my machine but I can create it on my colleague's machine.
I downloaded SPD 2013 on a 32 bit laptop I have access to, in which I can create a workflow. One existing workflow can be accessed, updated etc. with no issue, one opens to a prompt to "Insert a stage" and one tells me that it "Failed to load
the workflow definition for the workflow", then the "SharePoint Designer cannot display the item" screen. All of these workflows can be accessed from my colleague's machine.
Here are the actions that I have taken to date on my own machine:
Cleared the caches multiple times
Checked for updates
Installed .Net Framework 4.5
Re-installed .Net Framework 4.0 (which contains 3.0)
Uninstalled and re-installed SPD 2013
Due to issues with a workflow on the site I am in contact with MS Support who are aware of this issue, they sent me a link to a hot fix that was already installed but they have no concrete idea of what might be going on.
I was convinced that it was an issue on my machine, but I don't know what the issues that I have seen on the 32 bit SPD on the new laptop mean.
I have been searching the internet for a fix with no success, I would appreciate any help.
Thanks
Mick

Hi,
According to your post, my understanding is that SharePoint Designer 2013 cannot access workflows in Office 365 Site.
There was an issue recently when a service release was implemented that incremented the version number in the HTML header on some SharePoint online sites to '16' when SPD was expecting '15'.
I suggest to install internet explore 10 and install a patch for IE10. Then test with "open with windows explore" then opened in SPD from sharepoint online.
In addition, I suggest that in SPD go to Account > Switch Account and type in the credentials of the site you are trying to open (it defaults to your Microsoft Login).
If the issue persists, to troubleshoot this issue, you can uninstall all versions of SharePoint Designer on workstation, clear cache and then reinstalling the latest SharePoint Designer. For the detailed information, you can refer to the
article: http://support.microsoft.com/kb/2794961
Here are two similar threads for you to take a look at:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/15fd1436-3166-4e43-8b22-cdb480091548/cant-open-sharepoint-online-site-in-sharepoint-designer-2013
http://community.office365.com/en-us/forums/154/t/149314.aspx?PageIndex=2
By the way, you can also post the question in Office 365 forum and more experts will assist you.
Office 365 forums
:http://community.office365.com/en-us/forums/default.aspx
More information:
SharePoint
Designer 2013: Server-side activities have been updated:
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Best Regards,
Linda Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Excel Automation with Interop - Windows Service - Microsoft Excel cannot access the file

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file:
Unhandled exception Occured : 'Microsoft Excel cannot access the file 'bla.xls'. There are several possible reasons:
The file name or path does not exist.
The file is being used by another program.
The workbook you are trying to save has the same name as a currently open workbook.'.'
The code snippet used to open the file:
xlApp = new Application();xlApp.Visible = false;xlApp.UserControl = false;xlApp.Application.ScreenUpdating = false;xlApp.DisplayAlerts = false;xlWorkbook = xlApp.Workbooks.Open( Filename: filePath, UpdateLinks: 2, IgnoreReadOnlyRecommended: true, Editable: false);
The console app and windows service are running on a Win Server 2008 64-bit OS with Excel 2013 32-bit installed. The service is running with a special user account, which has all the right permissions on accessed files and folders. The excel process is also
started with the same account (I cheched that one).
I already tried to do the following, but to no avail:
Run excel.exe /automation -> worked fine
Created the folders and also gave full control to the account under which the service is run (even gave full control to Everyone)
C:\Windows\SysWOW64\config\systemprofile\Desktop
C:\Windows\System32\config\systemprofile\Desktop
Configured DCOM
Excel Application -> Identity -> Specific user account
Excel Application -> Identity -> Interactive User
Excel Application -> Security -> Launch permissions -> Everyone full control
Several combinations of the above
So I really am stuck with this problem right now. Any input on this is appreciated.

I have a windows console application, which automates Excel. In our scenario the application gets called from a Windows Service. If the console app is executed directly everything works fine. If the console app is executed through the Win Service, we get
the following error when trying to open the excel file
Microsoft does not currently recommend, and does not support, Automation of Microsoft Office applications from any unattended, non-interactive client application or component (including ASP, ASP.NET, DCOM, and NT Services), because Office
may exhibit unstable behavior and/or deadlock when Office is run in this environment.
If you are building a solution that runs in a server-side context, you should try to use components that have been made safe for unattended execution. Or, you should try to find alternatives that allow at least part of the code to run client-side.
If you use an Office application from a server-side solution, the application will lack many of the necessary capabilities to run successfully. Additionally, you will be taking risks with the stability of your overall solution.
You can read more about that in the
Considerations for server-side Automation of Office article.

Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

Hi, guys
I cannot view delegate mailbox in Outlook. Following is my configure.
I have two mailbox A-User and B-User
Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox.
Right click A-User's root inbox and select Properties -> Permission, select B-User and check "Folder visible".
Login Outlook as B-User on other computer, click File -> Account Settings -> Account Settings, select B-User and click Change -> More Settings -> Advanced, add A-User.
Now I can see a root A-User in Navigation Pane. But when I click it, it shows
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location."
or
"Cannot display the folder. Microsoft Outlook cannot access the specified folder location. The operation failed. An object cannot be found".
I searched some solutions from internet, but all of them don't work. Could you give some suggestions?
Thanks.

Hi,
First, please double check if you have given the right permission to B-User on your step 2.
In addition, we can try to give a higher permission to the B-user to check the result.
Please feel free to post back and let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

Mail cannot access your mailbox information because it is in use

I have my mail on a Truecrypt drive and I have an alias pointing to that drive in my library and so sometimes I get this message:
"Mail cannot access your mailbox information because it is in use."
Options are:
"Quit and rebuild Information" or "Quit"
If I rebuild then I was losing all my sent messages which is a drag and it takes a while to re-download all the messages. So what I tried was deleting the Envelope Index.lock file and then launch mail and it started up with no problems.
I think the reason this is happening is that it is possible that when I shut my computer down, Truecrypt dismounts the drive while Mail is accessing the mail folder (hence the lock file) and so when I start up again and remount the truecrypt drive that lock file is still there and I have to delete it or Mail thinks some other program is using the mail folder. Just a guess.
Hope this helps someone else if they Google this error.

I do but I do it from another computer -- that is the whole point of IMAP, by the way. I don't see how my accessing the IMAP server from another computer should cause Mail.app to think that my mailboxes on my local host, which are just copies, need to be rebuilt. I filed a bug on this and Apple gave me the annoying "Known issue" response, which means maybe they'll fix it, maybe not, thank you very much. It went away for a while, and now it's back again... sigh.

Cannot access file from JApplet

I have used the swingall.jar file with my JApplet for any
version of IE. It gives one error
i.e
Cannot access file c:\prog\project
I want to create a directory within c:\prog and also i want
to write some files there. Pls help me.

try this my friend!
1.     Compile the applet
2.     Create a JAR file
3.     Generate Keys
4.     Sign the JAR file
5.     Export the Public Key Certificate
6.     Import the Certificate as a Trusted Certificate
7.     Create the policy file
8.     Run the applet
Susan
Susan bundles the applet executable in a JAR file, signs the JAR file, and exports the public key certificate.
1.     Compile the Applet
In her working directory, Susan uses the javac command to compile the SignedAppletDemo.java class. The output from the javac command is the SignedAppletDemo.class.
javac SignedAppletDemo.java
2.     Make a JAR File
Susan then makes the compiled SignedAppletDemo.class file into a JAR file. The -cvf option to the jar command creates a new archive (c), using verbose mode (v), and specifies the archive file name (f). The archive file name is SignedApplet.jar.
jar cvf SignedApplet.jar SignedAppletDemo.class
3.     Generate Keys
Susan creates a keystore database named susanstore that has an entry for a newly generated public and private key pair with the public key in a certificate. A JAR file is signed with the private key of the creator of the JAR file and the signature is verified by the recipient of the JAR file with the public key in the pair. The certificate is a statement from the owner of the private key that the public key in the pair has a particular value so the person using the public key can be assured the public key is authentic. Public and private keys must already exist in the keystore database before jarsigner can be used to sign or verify the signature on a JAR file.
In her working directory, Susan creates a keystore database and generates the keys:
keytool -genkey -alias signFiles -keystore susanstore -keypass kpi135 -dname "cn=jones" -storepass ab987c
This keytool -genkey command invocation generates a key pair that is identified by the alias signFiles. Subsequent keytool command invocations use this alias and the key password (-keypass kpi135) to access the private key in the generated pair.
The generated key pair is stored in a keystore database called susanstore (-keystore susanstore) in the current directory, and accessed with the susanstore password (-storepass ab987c).
The -dname "cn=jones" option specifies an X.500 Distinguished Name with a commonName (cn) value. X.500 Distinguished Names identify entities for X.509 certificates.
You can view all keytool options and parameters by typing:
keytool -help
4.     Sign the JAR File
JAR Signer is a command line tool for signing and verifying the signature on JAR files. In her working directory, Susan uses jarsigner to make a signed copy of the SignedApplet.jar file.
jarsigner -keystore susanstore -storepass ab987c -keypass kpi135 -signedjar SSignedApplet.jar SignedApplet.jar signFiles
The -storepass ab987c and -keystore susanstore options specify the keystore database and password where the private key for signing the JAR file is stored. The -keypass kpi135 option is the password to the private key, SSignedApplet.jar is the name of the signed JAR file, and signFiles is the alias to the private key. jarsigner extracts the certificate from the keystore whose entry is signFiles and attaches it to the generated signature of the signed JAR file.
5.     Export the Public Key Certificate
The public key certificate is sent with the JAR file to the whoever is going to use the applet. That person uses the certificate to authenticate the signature on the JAR file. To send a certificate, you have to first export it.
The -storepass ab987c and -keystore susanstore options specify the keystore database and password where the private key for signing the JAR file is stored. The -keypass kpi135 option is the password to the private key, SSignedApplet.jar is the name of the signed JAR file, and signFiles is the alias to the private key. jarsigner extracts the certificate from the keystore whose entry is signFiles and attaches it to the generated signature of the signed JAR file.
5: Export the Public Key Certificate
The public key certificate is sent with the JAR file to the whoever is going to use the applet. That person uses the certificate to authenticate the signature on the JAR file. To send a certificate, you have to first export it.
In her working directory, Susan uses keytool to copy the certificate from susanstore to a file named SusanJones.cer as follows:
keytool -export -keystore susanstore -storepass ab987c -alias signFiles -file SusanJones.cer
Ray
Ray receives the JAR file from Susan, imports the certificate, creates a policy file granting the applet access, and runs the applet.
6.     Import Certificate as a Trusted Certificate
Ray has received SSignedApplet.jar and SusanJones.cer from Susan. He puts them in his home directory. Ray must now create a keystore database (raystore) and import the certificate into it. Ray uses keytool in his home directory /home/ray to import the certificate:
keytool -import -alias susan -file SusanJones.cer -keystore raystore -storepass abcdefgh
7.     Create the Policy File
The policy file grants the SSignedApplet.jar file signed by the alias susan permission to create newfile (and no other file) in the user's home directory.
Ray creates the policy file in his home directory using either policytool or an ASCII editor.
keystore "/home/ray/raystore";
// A sample policy file that lets a JavaTM program
// create newfile in user's home directory
// Satya N Dodda
grant SignedBy "susan"
     permission java.security.AllPermission;
8.     Run the Applet in Applet Viewer
Applet Viewer connects to the HTML documents and resources specified in the call to appletviewer, and displays the applet in its own window. To run the example, Ray copies the signed JAR file and HTML file to /home/aURL/public_html and invokes Applet viewer from his home directory as follows:
Html code :
</body>
</html>
<OBJECT classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
width="600" height="400" align="middle"
codebase="http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version=1,3,1,2">
<PARAM NAME="code" VALUE="SignedAppletDemo.class">
<PARAM NAME="archive" VALUE="SSignedApplet.jar">
<PARAM NAME="type" VALUE="application/x-java-applet;version=1.3">
</OBJECT>
</body>
</html>
appletviewer -J-Djava.security.policy=Write.jp
http://aURL.com/SignedApplet.html
Note: Type everything on one line and put a space after Write.jp
The -J-Djava.security.policy=Write.jp option tells Applet Viewer to run the applet referenced in the SignedApplet.html file with the Write.jp policy file.
Note: The Policy file can be stored on a server and specified in the appletviewer invocation as a URL.
9.     Run the Applet in Browser
Download JRE 1.3 from Javasoft
save this to write.jp
keystore "/home/ray/raystore";
// A sample policy file that lets a JavaTM program
// create newfile in user's home directory
// Satya N Dodda
grant {
permission java.security.AllPermission;
save this to signedAppletDemo.java
* File: @(#)SignedAppletDemo.java     1.1
* Comment:     Signed Applet Demo
* @(#)author: Satya Dodda
* @(#)version: 1.1
* @(#)date: 98/10/01
import java.applet.Applet;
import java.awt.Graphics;
import java.io.*;
import java.awt.Color;
* A simple Signed Applet Demo
public class SignedAppletDemo extends Applet {
public String test() {
setBackground(Color.white);
     System.out.println(System.getProperty("user.home"));
     String fileName = System.getProperty("user.home") +
                    System.getProperty("file.separator") +
                    "newfile";
     String msg = "This message was written by a signed applet!!!\n";
     String s ;
     try {
     FileWriter fos = new FileWriter(fileName);
     fos.write(msg, 0, msg.length());
     fos.close();
     s = new String("Successfully created file :" + fileName);
     } catch (Exception e) {
     System.out.println("Exception e = " + e);
     e.printStackTrace();
     s = new String("Unable to create file : " + fileName);
     return s;
public void paint(Graphics g) {
g.setColor(Color.blue);
g.drawString("Signed Applet Demo", 120, 50);
g.setColor(Color.magenta);
g.drawString(test(), 50, 100);

Cannot access IP

Similar Messages

Maybe you are looking for