Cannot access LaCie hard drives

I installed my new AEBS today. I installed all of the available software updates. I connected an HP LaserJet printer and two LaCie hard drives to the base station via a powered Dr. Bott T7 USB Hub. (My computer is a new MacBook Pro 17" running OS 10.4.10)
My wireless signal seems to be stable (using the AEBS in bridge mode connected to Qwest DSL wireless router).
The wireless printer connection works fine.
The problem is not being able to mount the hard drives. Both drives worked when connected directly to my MacBook, prior to connecting them to the AEBS.
Opening the AirPort Utility, I can see both drives listed under "Disks" (This pane shows storage devices connected to your base station). File sharing is enabled; Secure Shared Disks: With base station password; Guest Access: Not allowed.
I get the dialog box: "The AirPort Disk "name" became available. What do you want to do? Action: Connect with Password." I enter the password that I selected during set-up and select "Remember this password in my keychain." When I click OK, I get the error message "Connection Failed - unknown user, incorrect password, or login is disabled. Please re-type the login information or contact the disk's administrator." I have doubled-checked and re-entered this information.
I have tried turning the power off and on (both the AEBS and the hard drives) and restarting the computer.
What am I missing?

Hi,
I've been trying to work out the Hard Drive problems with the Airport Extreme for a few days and have had some success, so I'll share the info if its any use!
First of all, your printer and both hard drives all run off their own power supply, therefore, you don't need to have a powered usb hub, or just take the plug out and keep using the hub, save yourself a plug!
More importantly, I have had the same thing with the hard drive appearing in the Airport Utility yet whenever I try to connect, it comes up with an error and can't mount, although when I go to network and connect it appears but then goes wrong at the last part mounting, this is what I found...
the first time I plugged hard drive in all worked nicely, however, any time I have unplugged the power to the Aiport Extreme and connected again it'll show but never connect. When I went to make a few partitions I realised that if you unplug the router and repower, whatever HD name its seen before doesn't work until the HD name was changed again. For example....
I called my first HD to connect 'wifiHD', was working fine, next time i unplugged router was still showing in network but I couldn't mount it, I then plugged it to the mac and renamed it 'wifiDISK' for example and plugged it back into the router and it worked fine! Its very strange cos when I needed to unplug it last time I then had the same trouble and just renamed it back to 'wifiHD' it worked fine! Its a little flaw which is a right bugger to find so the bottom line is...
*RENAME THE HARD DRIVE EVERY TIME YOU UNPLUG THE ROUTER AND YOU CAN MOUNT IT AGAIN*
Another tip is format your HD in 'Mas OSX Extended' as it can be read by both mac and PC over the network. Then as windows isn't the best when you go to 'My Network Places' and 'Add Network Place' if you can't find the HD or even the router then enter
\\routername\\hardrivename\
in this format into the box, it'll take a mo but it'll then ask for the password! I personally have my hard drive guest access read + write so I entered
user: guest
password: base station password (or disk password as selected in airport utility)
and it all worked!
Sorry for the long explanation, hope this has helped!

Similar Messages

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help?

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help Please?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

I tried to put a copy of windows xp on a dos partition on my mac pro and now cannot access the hard drive with the latest maverics on it

I tried to put a copy of windows xp on a dos partition on my harddrive partitioned for mac pro os x maveriks 10.9.3 but with a dos partition fat32 for the windows; but when I tried to reboot I cannot now access the hard drive. Sometimes I get a white page with a question mark and sometimes I get a black screen with a blinking curser at the top. I have a backup mac with lion which I am now using to comunicate.

Windows XP has a notorious reputation for crapping on multiple partition boot blocks, including in your case, OS X.
There are three options.
Boot into Recovery (Press and hold command+R at boot)Choices
Restore from Time Machine backup
Retrieve and install current version of OS X from Apple Servers
Boot into Internet Recovery (Press and hold option+command+R at boot)
Requires Mac that shipped with OS X Lion or later
Retrieves and installs original version of OS X that shipped with the machine
Must update to Mavericks again
Restore user data from Time Machine
Apple Retail Store - Genius Bar appointmentSee if Apple will reinstall OS X Mavericks for you
When you resurrect your machine, follow Eric Root's advice about Boot Camp, or a Virtual Machine. Boot Camp v5.1 on Mavericks no longer supports Windows XP, Vista, or Enterprise versions of Windows 7 or 8.

Cannot access external hard drive on Airport Extreme (802.11n) network.

It took me many hours to even get my Lacie 320GB hard drive on the network. I went back and forth between plugging it directly into the usb port on my PowerBook and plugging it directly into the extreme or the usb hug plugged into the extreme. It would consistently tell me that I was denied access, or I was using the wrong password when I know I was not. Eventually I found a forum that suggested creating a "shared" folder on the drive. Eventually I think I had to do a get info and give myself and others permissions to EVERYTHING on the drive and the subfolders. Then I finally got access. But then the "connection was interrupted" and I lost access completely again. I am wondering if this is a "mounting" issue. I may not be clear on what I am supposed to do to mount the exernal. I have upgraded to Leopard and have not been able to access the drive through the extreme since.

What is the drive formatted in? I had problems with mine when it was formatted in FAT32.
Tom

My lacie hard drive cannot be copied to or read from

My lacie hard drive was working great for months. When it was working I had the lacie tower as an icon on my desktop. Now, I have a LaCie Disk icon that looks orange with a firewire symbol on it. And now, when I try and copy things to it, it says "Attempting to copy to the LaCie Disk Failed. The disk cannot be read from or written to." I don't know exactly when this icon appeared on my desktop, but it was within the past 2 weeks or so. Perhaps the installation of virtual pc is what caused this problem.Whatever, how do i fix this problem?

Don't write on to or use that disk until you have data recovery software ready. The more you use it, the less data you'll recover.If you search these boards there are numerous threads listing data recover software.
You could consider anotther external drive to act as a back-up rather than storage drive - which will allow you to recover the data more quickly.
mrtotes

Opening previous itunes on my LaCie Hard Drive

My powerbook was stolen recently. Just before that, luckily, I had gone to the Genius bar (trying to selectively move music from my itunes library on the laptop to my LaCie Hard Drive, to free up some space). I learned that moving your library is an all or nothing proposition, I wouldn't be able to selectively move music to the LaCie. So I copied the entire library to the LaCie HD. Then, we set up some alias folders on my desktop whereas I could switch the itunes library folder, that I wanted access to, into the Mac HD music folder. Then, when I opened itunes, I could open it on the LaCie HD, or open the itunes music library on my laptop. Then I could just delete all the music on the laptop I didn't want to carry with me for work travel. But then, the laptop got stolen. Now, I'm on my old G4 Quicksilver, trusty ol' guy, where I have an old music library on it. I've also bought a few cds from itunes using this library. Now, I'm about to go on another trip, want to update my ipod and transfer new music to it, the first time on this computer, but I can't get access to my itunes music library on the LaCie HD. I tried changing, (under preferences -advanced- location change to La Cie HD), but it still opens the Mac HD, not the LaCie. I even tried changing the location, (same pref-adv-change location), and restarting, didn't work. It would still open the Quicksilver itunes. I tried changing out the itunes music folder, moving the folder from the Mac HD music window onto the desktop and moving the LaCie itunes music folder into the Mac HD Music window/folder, but it tries to copy it there ("not enough room to copy").
So - how can I use the itunes on the LaCie, where the bulk of my music is? When I updated itunes, did it not allow me to have two libraries anymore? I'm willing to sacrifice the Quicksilver itunes library to switch to the one on the LaCie. I just need to keep itunes on the LaCie because it's too big for my Mac HD. And if I have to sacrifice the Quicksilver itunes music library, how can I save the music I've bought from itunes that's only in that library? Do I have to burn it to a disc and then re-import it? I must say, there are definite advantages to just going out and buying actual cd's!
Thanks for any help you can offer! Edward

Still a little problem. I did everything you said, and it seems itunes updated with the library on the external, and I saw that the album artwork was updating. I can play songs that I click on, the only thing now seems to be that all the albums/playlists, that go with the music, are missing. Only the playlists/albums from the old internal itunes are there.
The one link you sent "Moving you iTunes Music Folder" - talked about consolidating after moving. Should I do that? It was odd, however, because some of the steps mentioned in that procedure were not available to me - like "click the new folder button in the Change Music Folder Location Window." I just did as you said and navigated to the external.
From itunes now, should I consolidate library? Once I plug my ipod into this new computer, it will be synched to it and any mistakes will be reflected on it too right? I could loose music if I hook the ipod up with itunes not being in total working order?
Thanks. I really appreciate your help. Hopefully I can cancel my genius bar appt. tomorrow and not have to lug the tower and drives in, especially because I'm leaving town early Tues. AM and have a million things to do first. Thanks.

Lacie Hard Drives won't mount

My two Lacie hard drives won't mount on my G5 running Tiger. They were fine on my G4 iMac running Panther. I've tried using the Lacie Update Tool but the drives aren't recognised. I've tested the firewire cables on another drive that works and they're fine, so it's not cables.
Both drives power up okay and whir into action, but just aren't talking to the G5.
Lacie d2 HD 80GB FW DV
Lacie 40GB (no model number, "DESIGN BY F.A.PORSCHE", no model number).
Any ideas much appreciated.

Reply
This happened to me with a LaCie external drive as well.
The problem is that LaCie formats the drives as PC-based
and not Mac Extended, so unless you reformatted the
drives to Mac when you started using them, your access
to them on any Mac may result in a failure to mount.
Once that happens retrieval of data is made more difficult
because of this formatting incongruity.
There is no way you can get the data once your G4 quits
mounting them. If you can get the data off of the drives,
back it up and then reformat the drives using Mac's Disc
Utility. Then you can reload the data and I suspect all of
your Macs will then mount the drives via Firewire.
Good Luck!
My two Lacie hard drives won't mount on my G5 running
Tiger. They were fine on my G4 iMac running Panther.
I've tried using the Lacie Update Tool but the drives
aren't recognized. I've tested the firewire cables on
another drive that works and they're fine, so it's
not cables.
iBook G4 Mac OS X (10.4.4)

I have recently bought a LaCie Hard Drive,

I have recently bought a LaCie Hard Drive, it works fine, and I have formatted for use with Mac OS X.
I share my iMac with other users, 3 others to be exact, and I want them to be able to use the external hard drive to store their files, music etc. However, I do not want the other users to be able to view the other users information.
I have created 4 Individual folders, with the users names on it, and when I try to prevent access to the folders I seem to block access to everyone.
How can I prevent other users from accessing others users' folders on an external hard drive?

Select the drive in the Finder and choose Get Info from the File menu. Next, uncheck the box 'Ignore ownership on this volume'. When done, create the four folders on this drive. Change the Group and Other access for each folder to No Access in the Get Info window, and then change the owner to that of the account you want to be able to access the folder. You may be asked to enter your administrator password one or more times.
Some disk formats, such as Mac OS Standard, don't support file permissions; to check what format a disk is in, select it, choose Get Info from the File menu, and look at the General section.
(10597)

Cant copy to Lacie Hard drive

I have a lacie hard drive that i use mostly with my pc. I had some files on my macbook that I wanted to put on that hard drive but when i try to copy them it wont let me and says that the file cant be modified. what can i do?

Your PC-oriented drive is undoubtedly formatted NTFS. Drives in that format are read-only for the Mac OS, unless you install third-party software such as NTFS-3G (freeware) or Tuxera NTFS (commercial) that enables full access to them.

Lacie hard drive, how do I view the files in Finder so I can delete some backups?

My LaCie hard drive is full so I need to delete some backups but although the disk is mounted in Finder I cannot see the backup files to delete any. How do I do this please?
Thanks Brian

Lion Mac OS X Communities
www.apple.com/support/timemachine
MacBook Pro Apple Support
MacBook Pro
Buy another backup drive. Keep this as is. depends on what and how you do backups. TimeMachine? there are program utilities to help manage but it is 'suppose' to manage itself (have 3.5x capacity of data you backup helps). You didn't say what type of backup method was used.
This is forum for Mac tower "Pro" workstation, not notebooks.

Cannot find my hard drive connected to my extreme

Hi - I am using a Windows 7 PC and cannot find the hard drive connected to my airport extreme. I have gone into manaul set up on the extreme and asked it to share the files which it has confirmed, yet when I go into windows explorer I cannot see the drive at all ...... can I please ask for some assitance?

Just want to be sure of three things first if you don't mind:
Does the 802.11n AirPort Extreme Base Station (AEBSn) have a Base Station Name that includes a space? For example: My AirPort Extreme. If it does, rename it so that it does not have any spaces or use the underscore character between words.
Does the shared HDD have a volume name that includes a space? If it does, again, remove them or add underscore characters.
Is the HDD formatted in NTFS? If so, the AEBSn does the best job of sharing HDDs formatted in HFS+, then FAT32. It will NOT work properly with HDDs formatted in NTFS. If the HDD is very high capacity, you may want to borrow a friend's Mac to format it in HFS+ or get a utility that lets your PC format/read/write to HFS+ volumes. Regardless of it being formatted in HFS+, the AEBSn will share it out using both the AFP (for Macs) and SMB (for Windows/Linux) file sharing protocols ... so Windows PC should not have any difficulty accessing it.

TS1550 Time Machine backup error with LaCie hard drive

When trying to backup in Time Machine to a new LaCie external hard drive, I get "Time Machine couldn’t complete the backup to “LaCie". The backup disk image “/Volumes/LaCie/(owner's name’s) MacBook Pro.sparsebundle” could not be accessed (error -1)." Can anyone tell me what I need to do to fix this? Do I need to erase and re-partition the LaCie hard drive? Thanks.

Hello,
See if this from the late/great Pondini helps...
http://pondini.org/TM/C17.html

External Lacie Hard Drive Won't Show On Desktop

Hello,
I have a LaCie d2 Hard Drive Extreme with Triple Interface. I know this topic has been posted before but nothing seems to be working for me. The hard drive will not show on my desktop, but it does show up in the Disk Utility. It's there, but I can't access it.
I have disconnected the drive many times. I have repaired the permissions on both drives more than once. I have swapped cables between firewire and USB. I have tried shutting down everything, unplugging everything and waiting 15 mintues before turning everything on. (Three times) (I have tried turning the computer on before connecting the drive, no good. I tried again with the drive already plugged in, no good, and also tried turning the computer on, then plugging the drive in and turning it on.
I have another LaCie Hard Drive, The one that has the design by F.A. Porsche and is 250GB. This drive connects perfectly. I don't understand. Hope someone out there can help me out, take care,
Tom

has the Lacie HD been formatted by another computer?

My Lacie Hard Drive is no longer being recognized by my MacBook, please help.

Hi all,
I have a Lacie external hard drive (LaCie Rugged XL eSATA 3Gb/s | USB 2.0) that I have been using on my MacBook (timemachine) (late 2008, 2.4 GHz Intel Core 2 Duo with OS X 10.9.1). One day it stopped being recognized, not showing up on the desk top, the disk utility program, etc.
I Googled many articles, blogs and support communities but have yet to find any solution. I also went to the Lacie support site and followed the trouble shooting instructions - changed my power source, usb cable, and tried the drive out on 3 different computers. The results: The drive works fine on the other computers (OS X and Windows) using the same power and usb cords. So Lacie recommened I contact Apple but my MacBook is not under warranty so I have decided to try my luck with the Apple Support Community. If any one has had this problem or knows the solution, please let me know. I would like to continue to use my MacBook with this Lacie hard drive.
Thanks

Hi Dibenkorn,
Yes, both USB ports are not recognizing this lacie external hard drive. I also tried the SMC reset but that did not change anything. I have another external hard drive (smaller one) and it works on this computer fine and like I said before the Lacie works fine on my other (older) MacBook. I just can not figure out what went wrong or what happened...

How can i access the hard drive in a satellite A30?

I have just bought a new hard drive and have been startled by the lack of information on the internet with help to access the hard drive. Please help. I have the satellite a30-203. Thanks, Daniel Short

Hi daniel,
turn your A30 upside down. Then you need to remove one screw in order to remove your optical drive. After this you will see the HDD. Remove 4 screws that secure your HDD from the computer. Then pull back the hdd using the back brackets in the same way like you pull out your optical device.
Hope this will help.

Cannot access LaCie hard drives

Similar Messages

Maybe you are looking for