Cannot access Linksys Wireless GUI Page after DHCP disabled.

Ok funny situation I have here... I have another main wired router, and a Linksys WRT54GS Wireless Router. I want to use the Linksys as an access point since my smoothy has DHCP server enabled. So, I disabled DHCP on the linksys, set the router IP as 192.168.0.2 (my smoothy is 192.168.0.1). I also put the connection from the main router to the Linksys on the LAN ports, not WAN. I reset everything and my computers and everything works fine. The DHCP works properly from my main router, I get Internet etc. HOWEVER, I cannot access the Linksys GUI page when I go to 192.168.0.2...it just times out! Any ideas? I can access it if the DHCP is enabled on the linksys, but with it off I cannot. Thanks!

try assigning a static ip add on the computer ( 192.168.1.3 ) .. connect it to the router and then try to access http://192.168.0.2

Similar Messages

Cannot access Oracle BAM Start Page

Although Oracle BAM installation completed without any error and I can start BAM related services without any issue, I cannot access Oracle BAM Start Page because of the following error.
You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. [ErrorSource="ActiveDataCache", ErrorID="ADCServerConnectionError"] The requested name is valid, but no data of the requested type was found [ErrorSource="mscorlib"] Debugging information: Oracle.BAM.ActiveDataCache.ServerUnavailableException: You are unable to connect to the Oracle BAM services. Contact your system administrator if the error persists. ---> System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found Server stack trace: at System.Net.Dns.GetHostByName(String hostName) at System.Net.Dns.Resolve(String hostName) at System.Runtime.Remoting.Channels.RemoteConnection..ctor(SocketCache socketCache, String machineAndPort) at System.Runtime.Remoting.Channels.SocketCache.GetSocket(String machineAndPort) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.SendRequestWithRetry(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream) at System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at Oracle.BAM.ActiveDataCache.Common.Core.IDataStore.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) --- End of inner exception stack trace --- at Oracle.BAM.ActiveDataCache.Remoting.ServerWrapper.Exists(String strDatasetID) at Oracle.BAM.ActiveDataCache.SystemType.LoadSchema(Boolean bCache) at Oracle.BAM.ActiveDataCache.Context.LoadUser() at Oracle.BAM.ActiveDataCache.Context..ctor(String strDomain) at Oracle.BAM.Web.WebPage.CreateContext(String strUserName) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey, Object oLock) at Oracle.BAM.Common.Threading.SynchedHash.GetObject(String strKey) at Oracle.BAM.Web.WebPage.GetContext() at Oracle.BAM.StartPage.StartUp.Initialize()
Do you have any idea ?
Although I checked ActiveDataCache.log, it is empty ( looks no problem ).
My environment as below.
OS : Windows 2003 R2 Enterprise Edition Service Pack 1
Oracle version : 10.1.0.2
Oracle BAM version : 10.1.2
Thanks in advance

Hi,
I've installed BAM 10.1.2 on Windows 2000 Professional. I have IIS 5.0 and Microsoft 1.1 .Net Framework installed on my PC. I'm able to use the Design Studio and Admin from Oracle BAM Enterprise Link. The installation completed successfully but I'm still not able to open the BAM start page.
I see the error:
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error:
Line 263: 
Line 264: 
Line 265: <authentication mode="Windows">
Line 266:
Line 267: </authentication>
Source File: C:\OracleBAM\BAM\web.config Line: 265
I've checked that OracleBAM appears as a virtual directory in IIS (from Personal Web Server) and there were no errors in installation. The Access Permissions is set to 'Read' and Application Permissions to 'Scripts'
Should the authentication mode take any other parameters ?
Let me know what can be done to resolve this issue.
Thanks in advance !

Urgent: cannot access the portal home page because of problems language

I have installed Oracle 9iAS, including infrastructure with language FRENCH_FRANCE.WE8ISO8859P15 and portal and wireless type I dont have problem for access to http://machine:1810 and http://machine:7779 in French.
But when I access this url: http://machine:7779/pls/portal, there is a error : java.io.IOException:
Unsupported character encoding: "ISO-8859-15"
at oracle.webdb.page.BaseContentRequest.getResponseJavaEncoding(Unknown Source)
at oracle.webdb.page.BaseContentRequest.getReader(Unknown Source)
at oracle.webdb.page.PageBuilder.getMetaData(Unknown Source)
at oracle.webdb.page.PageBuilder.process(Unknown Source)
at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
When I install infrastructure, I select FRENCH_FRANCE.WE8ISO8859P15. I check in sql*plus in the v$NLS_PARAMETERS and NLS_LANGUAGE is FRENCH, NLS_TERRITORY is FRANCE, NLS_DATE_LANGUAGE is FRENCH and NLS_CHARACTERSET is WE8ISO8859P15. It seems all well.
But I check in the Windows registry, I find that NLS_LANG is FRENCH_FRANCE.WE8MSWIN1252 under under HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/HOME1 and HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE/HOME2. Then I correct in FRENCH_FRANCE.WE8ISO8859P15 in the Windows registry.
Also I check in EM web_site in
To check the DAD settings, in my EM Console, I go to Http Server/PLSQL Properties/DAD status. I correct NLS Language with FRENCH_FRANCE.WE8ISO8859P15.
Also I correct langinst.cmd under OH/portal/admin/plsql to replace WE8MSWIN1252 with WE8ISO8859P15
case f:
setenv NLS_LANG FRENCH_FRANCE.WE8ISO8859P15
breaksw
case frc:
setenv NLS_LANG FRENCH_FRANCE. WE8ISO8859P15
breaksw
All that I do is not useful for access the portal home page, thers is always the error java.io.IOException: Unsupported character encoding: "ISO-8859-15"
I dont have problem in language English. My page portal is running well in a another machine where I install Oracle9iAS in English, but I have always problem in the machine where I install Oracle9iAS in French.
I find there are lots of this problem in this forum, but there isnt a answer. So thanks for anyone to resolve this problem.

Hello Michael,
Thanks for your help !
I think that the problem is in the PlsqlNLSLanguage. But I couldnt check it now with the version French WE8ISO8859P15, because today Ive installed oracle902 AS with WE8MSWIN1252 and it functions well. I find the PlsqlNLSLanguage in my $ORACLE_HOME_INFRA/Apache/mod_plsql/conf/dads.conf is FRENCH_FRANCE.WE8MSWIN1252
, and in my $ORACLE_HOME/Apache/mod_plsql/conf/dads.conf is AMERICAN_AMERICA.WE8MSWIN1252. But I dont understand why it doesnt create the languages problem.
I will try again in another machine with WE8ISO8859P15.

I cannot access my emails through Firefox after having system changed from Mac to PC. I have reset the password but no luck. I get 'reason=failure'. I cannot access from other computers either.

I cannot access my emails from any work computer despite resetting password (original password unknown as before my time and had been 'remembered' in system so was always there).
== This happened ==
Every time Firefox opened
== Logging on after work done to change systems. IT person now gone.

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

When I update to the latest version I cannot access the add-ons page or request help because neither page will load. My Weather channel add-on was NOT piced up when updating to the latest version. Why problems with improved latest version?

I have twice downloaded the latest version in the last month. Each time I encountered the same problems. the Weather Channel add-on I have did NOT appear in the latest version. When I tried to access the Add-Ons page under the Tools header it would not load. When I tried to contact Mozilla from the Help header it would not load
When I open a web page from Bookmarks it is painfully slow to load.
This is NOT an improved version. I have been using Firefox for years without problems; I prefer it to Internet Explorer. However the latest 'improved' version may change my mind.

The problem is that the Add-ons Manager tab when opened the first time, is on "Get Add-ons" section and that must be downloaded from the Add-ons server which might be overburdened.
* If you need to look for new Add-ons, go directly to the Add-ons site -> https://addons.mozilla.org/en-US/firefox/
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Add-ons are disabled after updating Firefox#w_check-for-new-versions-of-your-add-ons|Check for New versions of your Add-ons]]
Check and tell if its working.
Not related to your problem but some of your Plugins are out-dated
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
* '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''

Cannot access my FF email page - just get page about newsletter. I use FF every day. Where is it?

I cannot access my ff email today. Just get screen with sign-up info for newsetter

If your Firefox just updated, there is an extra tab about the update. You should be able to close that tab and then your regular home page should be behind it. Alternately, try clicking the Home icon on the toolbar to load your homepage in the current tab. Any luck?

How to configure OC4J to force the access only to one page after the log in

Hi,
I want to know how could I force the access to only one page of the web application when the user first time accesses.
I don't want to use session. Is there another way, say by configuring the OC4J configuration files?
Thanks

Hi,
you can write a servlet filter for the we application that checks if the accessed page is the login page and if not of the login page was accessed before
Frank

After downloading OS X Yosemite I cannot access many of the pages documents or download new pages documents coming in...what is going on?

Unable to access pages documents or download from mail in pages unless I have a new version. Since I downloaded OS X Yosemite!
Must I spend $19.95 to download the new pages version?

Thankyou for the reply.
No. I have tried twice. When I turn off pages in the iCloud settings while logged into his account, then my documents in pages just are gone. They return when I turn it back on.
Is there another way I can save them to the device?

After downloading lion I cannot access documents created on pages 06/08

I have upgraded my Mac to Lion and can no longer read documents I have created in Pages 06 and 08.

Honestly I haven't run into this situation before. You can purchase the Pages upgrade from the App Store for only 19.99 so it may not be a bad idea. At least then you will be up-to-date. If you want to dig a little more before buying there is a Pages forum and also a Lion forum, you may want to ask on each of those forums. When you find out please let us know how it turns out, your experience could help others.

Cannot Access Routers Web Based Page?

I have a wireless Linksys router Model WRT54G and it will not let me access my routers web based page. When I enter the default IP address into the Address Bar nothing happens (I've checked to make sure my router is on the default IP), i just get a blank screen, no pop-up or anything. Help?

Note that the router's "web pages" are built into the router. You do not need to be connected to the Internet to see them.
To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

I cannot access my wireless internet. I just bought a macbook last night

Help cant access wireless internet

Hi Shane
I can tell that you're new to Apple discussions so welcome.
Please note that you should not start several discussions threads with the same topic - it doesn't get your question answered any quicker, it only serves to annoy the old lags like myself who hang around here
Also, you should only mark an answer as Correct if it actually answers your problem. That way other people who have the same problem won't waste time looking at the wrong answer.
Anyway, to answer your particular problem, I've discovered that this sequence of steps often helps:
System Preferences > Network
Select the AirPort from the left hand side
Click on the Locations combo box and select Edit Locations...
Click on + to add a new location, call it "Home" (or anything else you prefer)
Click on Advanced
Select the AirPort tab and enter your network name
Select TCP/IP tab.
Configure IPv4 Using DHCP
Now click on Renew DHCP Lease. After a few seconds you should get an IP address (probably 192.168.x.x)
Click on Proxies tab.
Select Auto Proxy Discovery and Use Passive FTP
Click on OK and Apply, etc.
Good luck
Bob

Cannot Access pre-repair TimeMachine files after config. new TM

Hello all...really in a bind...
My only backup is a Time Machine backup which wouldn't restore. While replacing files/folders individually manually (via finder), and then also through Time Machine (somehow became possible again), I decided to backup what I had so far (a few hours of work)...
After backing up via Time Machine, I can no longer access the original files; I am told I 'do not have sufficient access privileges'.
I noticed on the forum that there can be permissions problems with 10.5.6; I am debating either using disk utility to check the external HD the backup(s) are on, and/or doing a permissions change via Terminal (sudo chmod etc....) as recommended in another post (though I am a bit unclear about exactly how to do that)...Is there a better order? one or the other? some other way?
Final complications: The older backups (under users) I want are in a folder on the external HD under { apple's macbook pro 15" }; this has a different user and password than my current computer configuration's backup, which is unfortunately called { Apple's macbook pro 15" } ... could this difference of only a capital A or lower case a be causing a problem? Is there a safe way to change it? Anyway to merge the new and old backups into a seamless 'timeline' where I can access the entire history at once?
Any help really and truly appreciated...

Sorry, but no, a new Mac is a new Mac, and you can't fool Time Machine into thinking otherwise.
On the first backup, you should get the prompt in #B5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum). As explained there, the new backups will be "appended" to the old ones, so you can still see and restore from them. But Time Machine will still do a full backup of the new Mac.

HT4623 I cannot access appstore in my iPad after updating to iOS7. How can I access it? Pls.help

i just updated my iPad to iOS7 but when I try to access appstore to dowload, I get message"cannot accesss appstore". I cannot even update the apps that shows need to updates and cannot download games. what am I gonna do to access my appstore. I never had this problem before the upgrade to iOS7

- hard reset (hold power button and home button at same time until it resets with an apple on it)
- reset all settings (settings, general, reset)
- back up and restore (using an itunes on ur pc, make sure the itunes is updated)
try those in order. they will fix ur issue

Mx880 connected to LAN. Cannot access via wireless. ???

I have an end user on campus who has a Canon MX880 multi-function printer/copier/scanner, etc. I have it configured to a specific IP address, and connected to the college LAN via data cable, data drop. The drop is good, I have tested with a laptop. I manually set the IP4 settings on the MX880, and can ping the printer when connected via ethernet to LAN. As soon as I try to get on the the college wireless LAN, I can't ping it. I took another laptop, disconnected the data cable from the printer, plugged it into the laptop, and manually config'd the laptop to the same manual IP4 settings as the printer is set to. This time, from the other laptop, I can ping connected to the printer port wirelessly or when ethernet connected. So there is nothing wrong with the campus wired or wireless network. It's only when I try and ping the MX880, via the campus wireless network, that I have a problem. Again, I have the MX880 ethernet connected to a data drop. I have the LAN settings enabled, and IP4 manually set. I can ping the printer IP address when ethernet connected from somewhere else on the network, but I can't when I'm using the campus wireless network. And again, If I use two laptops, one used in place of the printer, but set to same IP settings, I have no problem pinging the IP address via LAN or campus wireless. Any ideas???

Most public networks (like the ones on a college campus) have built in firewalls that prevent communication between devices. They're designed primarily to give a device internet access but not to let 2 devices on the network talk to each other for security purposes (so the guy in the dorm next to you can't hack your computer). Trying to use the printer with a public network probably wont work.

Cannot access disk in Time Capsule after updated to 7.4.1

I have a macbook pro and a PC(MS Vista), both connect to the Time Capsule via LAN.
After I updated the Airport Utility to 7.4.1 in PC several days ago, I could never access the disk in Time Capsule via PC, it always said "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator". However, everything is fine when I use macbook to access the disk.
I tried to reset the password, tried to access with disk password or with accounts, but nothing worked.
Whatever the password I changed to, it always show the same dialog.
Thank you for your helping!

I had the same problem.. Updating to 7.4.2 seems to have solved the problem, for me anyway. There seem to be a lot of posts about people noticing network slow downs. Can't say I have, but currently I can't access my printer attached to the USB port on my TC from my PC. My iMac can print to it no problem. Bought printer after update installed. If someone can point me in the right direction of solving that problem that would be great.
Cheers

Cannot access Linksys Wireless GUI Page after DHCP disabled.

Similar Messages

Maybe you are looking for