Cannot access local DFS shares while VPN is active

Hi
We use Windows Server 2008 Standard as a domain controller. It also hosts DFS. Although the namespaces are hosted on the server, the data is stored on a Windows 2008 Storage Server. We do not use DFS replication.
I have several DFS shares mapped on my Windows 7 client, which has just replaced my XP client, and can access them without any problems.
However, as soon as I connect to a remote network (located on a different domain - it has nothing to do with our network at all), I am unable to access our DFS shares. If I try to access a DFS share an error message pops up stating:
Location is not available
Logon failure: unknown user name or bad password.
The first time I connected the VPN a network dialog popped up asking what type of network it was and I chose Work. After connecting via the VPN I use remote desktop to carry out daily maintenance on a server on the remote network.
Other local resources are available. I can ping machines via IP, name and FQDN. I can access the same DFS shares using UNC paths. So, although I receive the error message described above when accessing AD-name.local-backslash-share-name1 I have no trouble
accessing server-name-backslash-share-name1
As soon as I close the VPN connection normal functionality is restored and I can again access the DFS shares without any problems.
Can someone help me fix this, please? When this was setup on my XP machine I never experienced this problem.
Also, is there a way of typing LAN addresses without the forum software converting them to a customised hyperlink? Thanks!

Thank you, fupin
Sabrina's suggestion to edit the pbk file worked. I changed the setting from 1 to 0 and connected to the remote network via the VPN and am still able to access the local DFS shares.
As per the OPs comments, the username and password I am using for the remote network are both different from the credentials I am using on the local network.
... take the steps in the KB 822707 to resolve it:
1). Locate the .pbk file that contains the entry that you dial. To do so, click Start, click Search, type *.pbk in the All or part of the file name box, and then
click Search.
2). Open the file in Notepad.
3). Locate the following entry: UseRasCredentials=1
4). Modify the entry to the following: UseRasCredentials=0
5). On the File menu, click Save, and the click Exit.
Cheers!

Similar Messages

You cannot access a DFS share through a mapped network

Im running a W2K8 R2 terminal server that acesses a DFS share on a W2K3 Standard server. All of a sudden when users log in the share is disconected. I cannot use the
\\example.com\dfs\share to connect but, I can use the IP address
\\1.1.1.1\share to connect. I have tried to install KB983620 and KB2194664 but when I click on the .msu it says the update is not applicable to your computer. I've aslo changed the Network Provider Order in the registry
to start with RDPNP and LanmanWorkstation.
Any ideas would be appreciated.

Have you tried the command: dfsutil /pktflush (suggested in KB983620)?
Please mark as answer or vote
as helpful when it applies. Thanks!

Cant access a DFS share from a Windows 7 computer

I am having DFS share access issues with a Windows 7 workstation.
My setup is I have 6 windows 7 stations accessing this DFS Share.
All computers have the same Administrator password and another User/Password
All but 1 are working as they should.
The DFS share is running under Server 2008 R2 and contains files from this and another server.
From the workstation, I can see the server under Network.
I can open it and see the individually shared volumes and I have full read/write permissions.
I can see the DFS share and I can map it.
If I try to open the shared volumes within the DFS file I get a message saying I dont have permission.
Interestingly, when I look at the properties of the DFS share form the workstation, I dont see a DFS tab.
If I do this from a workstation is is able to connect fully to the share, I see a DFS tab in the properties.
I tried to include everything,
Thanks in advance

Hi,
Please try hotfix in the following KB,and check the result.
You cannot access a DFS share through a mapped network drive on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/983620/en-us
Some steps for troubleshooting DFS you can try
http://technet.microsoft.com/en-us/library/cc962144.aspx
How to troubleshoot Distributed File System Namespace access failures in Windows
http://support.microsoft.com/kb/975440/en-us
use command dfsutil /pktinfo to test the access to the DFS root and connectivity to the root shares
http://blogs.technet.com/b/askds/archive/2009/06/04/the-case-of-the-random-dfs-access-denial.aspx
Regarding to the missing dfs tab, there's a policy, locate to User Configuration\Administrative Templates\Windows Components\Windows Explorer\remove dfs tab, then users can not view or change the properties of the dfs shares
Yolanda Zhu
TechNet Community Support

Using Cisco VPN cannot find local SMB shares

I'm trying to help a colleague get remote VPN access to our office. I have a Macbook Pro and a Macbook Air which work fine. I gave my colleague a step-by-step how to and he seems to have followed it correctly. He can connect using the VPN connection just fine. However, when he goes to connect to our SMB server, he gets an error saying the server is not found.
I told him to try it using the IP address of the server on our local LAN and he says he gets the same error dialog.
Both the DNS name and the IP address work fine for me on both of my machines.
I need ideas of what else to check in his Mac configuration that might be the cause of this failure. Alturnatively, is there a way to "dump" his settings to a text file or something that I can compare to mine to give me a clue?

Thank you, fupin
Sabrina's suggestion to edit the pbk file worked. I changed the setting from 1 to 0 and connected to the remote network via the VPN and am still able to access the local DFS shares.
As per the OPs comments, the username and password I am using for the remote network are both different from the credentials I am using on the local network.
... take the steps in the KB 822707 to resolve it:
1). Locate the .pbk file that contains the entry that you dial. To do so, click Start, click Search, type *.pbk in the All or part of the file name box, and then
click Search.
2). Open the file in Notepad.
3). Locate the following entry: UseRasCredentials=1
4). Modify the entry to the following: UseRasCredentials=0
5). On the File menu, click Save, and the click Exit.
Cheers!

Access to DFS root via VPN not working - error 0x80070035 keeps popping up

Dear all,
when trying to access the DFS root via VPN from a Windows 7 non-domain member computer I always receive an error stating "Windows cannot access \\eggs.local\dfs", Error Code: 0x80070035, The Network Path was not found.
I searched the internet as well as these forums in order to get to grips with this error message but didn't find anything to solve my problem.
I made sure, that NetBIOS over TCP/IP is enabled, that I have access to the VPN adapter's DNS as well as WINS servers, that DNS name resolution is working properly, DNS split tunneling is enabled, Windows Firewall is disabled, and so forth. Still no luck.
Any ideas?
Thanks Alex
Alexander Ollischer Diplom-Wirtschaftsinformatiker (FH) Citrix & Microsoft Certified Engineer (CCEA, CCEE, MCSA, MCSE, MCDBA, MCTS) Afontis IT+Services GmbH Baierbrunner Straße 15 81379 München Deutschland Telefon (089) 74 34 55-0 Fax (089) 74 34 55-55
mailto:[email protected] http://www.afontis.de http://www.itganzeinfach.de Amtsgericht München, HRB 109 005 Geschäftsführer: Thomas Klimmer

Hi,
Though you mentioned DNS is working properly, please check if DNS forwarder is set as set correctly.
And incase it is caused by authentication, please try to force Kerberos to use TCP - by default it using UDP and on a slow VPN connection, UDP packets may be dropped.
How to force Kerberos to use TCP instead of UDP in Windows
http://support.microsoft.com/kb/244474
Also check NTFS and Sharing permission on top of the DFS Namespace. At least give users a Read permission.
If you have any feedback on our support, please send to [email protected]

Cannot access local resource file

When I run my application on browser these error comes, I have found to change right click on project>properties>flex build path>libary path> framework linkage to "Merge into code"not working,
I have also changed right click on project> properties>Flex compiler> Additional compiler arguments - -locale en_US to some -network false still its not working
and undid whatever change i made,
Help!
SecurityError: Error #2148: SWF file http://localhost/aamshare-debug/aamshare.swf cannot access local resource file:///C|/wamp/www/aamshare-debug/media/bse.png. Only local-with-filesystem and trusted local SWF files may access local resources.
    at flash.display::Loader/_load()
    at flash.display::Loader/load()
    at mx.controls::SWFLoader/loadContent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\controls\SWFLoader.as:1611]
    at mx.controls::SWFLoader/load()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\con trols\SWFLoader.as:1380]
    at mx.controls::SWFLoader/initializeHandler()[C:\autobuild\3.2.0\frameworks\projects\framewo rk\src\mx\controls\SWFLoader.as:1971]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.core::UIComponent/dispatchEvent()[C:\autobuild\3.2.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9298]
    at mx.core::UIComponent/set processedDescriptors()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\core\UICom ponent.as:1217]
    at mx.core::UIComponent/initializationComplete()[C:\autobuild\3.2.0\frameworks\projects\fram ework\src\mx\core\UIComponent.as:5395]
    at mx.core::UIComponent/initialize()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx \core\UIComponent.as:5379]
    at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()[C:\autobuild\3.2.0\frameworks\pro jects\framework\src\mx\core\UIComponent.as:5267]
    at mx.core::Container/http://www.adobe.com/2006/flex/mx/internal::childAdded()[C:\autobuild\3.2.0\frameworks\pro jects\framework\src\mx\core\Container.as:3305]
    at mx.core::Container/addChildAt()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\c ore\Container.as:2217]
    at mx.core::Container/addChild()[C:\autobuild\3.2.0\frameworks\projects\framework\src\mx\cor e\Container.as:2140]
    at mx.core::Container/createComponentFromDescriptor()[C:\autobuild\3.2.0\frameworks\projects \framework\src\mx\core\Container.as:3681]
    at mx.core::Container/createComponentsFromDescriptors()[C:\autobuild\3.2.0\frameworks\projec ts\framework\src\mx\core\Container.as:3493]
    at mx.containers::ViewStack/instantiateSelectedChild()[C:\autobuild\3.2.0\frameworks\project s\framework\src\mx\containers\ViewStack.as:1140]
    at mx.containers::ViewStack/commitProperties()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\containers\ViewStack.as:664]
    at mx.core::UIComponent/validateProperties()[C:\autobuild\3.2.0\frameworks\projects\framewor k\src\mx\core\UIComponent.as:5807]
    at mx.managers::LayoutManager/validateProperties()[C:\autobuild\3.2.0\frameworks\projects\fr amework\src\mx\managers\LayoutManager.as:539]
    at mx.managers::LayoutManager/doPhasedInstantiation()[C:\autobuild\3.2.0\frameworks\projects \framework\src\mx\managers\LayoutManager.as:659]
    at Function/http://adobe.com/AS3/2006/builtin::apply()
    at mx.core::UIComponent/callLaterDispatcher2()[C:\autobuild\3.2.0\frameworks\projects\framew ork\src\mx\core\UIComponent.as:8628]
    at mx.core::UIComponent/callLaterDispatcher()[C:\autobuild\3.2.0\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8568]

Since you are loading your swf over http, it will be placed in a remote sandbox and will not be able to access the local filesystem. You should load your png in the same way as your swf (ie. over http), or embed it into your application.

When i login with microsoft account cannot access with administrative share c$

i have a problem when i login to windows with microsoft account cannot access any network computer with administrative sharing c$,d$ with windows 8.1
but when i login with local account can access
and some people tell me create key in regedit t fix it
after enter user name and password show this error
and i apply your instruction and not fix until now
note:
my Machine windows 8.1 if another machine in network windows 7 can access a hidden share if machine in network windows 8.1 show this message in image 2
but if i login with local user can i access all machine hidden share network windows 7 and 8.1

yes this computer i want to access name poland2-work and have two users
first :administrator
second : poland 2

ASA Cannot access https device via Clientless VPN bookmark, site to site works fine

We've got two offices connected via an IPSEC tunnel. This site to site VPN works great, we can access our remote devices fine from a PC on either LAN at each office. The device's address is https://192.168.210.2
However, if we make a bookmark on the Clientless VPN for that same address the conneciton just times out if it has to go over the site to site VPN.
We plugged the exact same web enabled device on the local side of the VPN, put in a bookmark for its https address and it works fine. Its just remote bookmarks for devices on the other side of the tunnel do not work.
Looking at the debug log I see the request going out from the source to the destination on port 443 but nothing more. The NAT exemption etc are all right because people on the LAN have no problem accessing this device remotely with their browser.
I haven't been able to adequately describe this problem to find a matching Cisco example, anyone know how to fix this?

hi luis,
thank you for your reply. we've checked the smoothwall configuration, but couldn't discover anything which could cause this problem. we even tried replacing the sa520 with a draytek vigor router to set up an lan-to-lan vpn with the smoothwall. with the draytek in place we have no problems accessing the aforementioned servers, so it seems the issue is with the SA520.
what exactly do you mean by creating an ACL from the remote WAN to our LAN? i assumed you meant creating a firewall rule, allowing traffic from the remote device's public ip to our LAN. however, in that case i need to enter an ip address of a device in our LAN, or else i cannot save this rule. as a test i entered the ip address of my machine as the destination address, but am still unable to access the aforementioned servers.
here's how i set up the rule:
from zone: UNSECURE (WAN/optional WAN)
to zone: LAN
service: ANY
action: ALLOW always
schedule: (not set)
source hosts: Single address
from: public ip of one of the aforementioned servers
source NAT settings > external IP address: WAN interface address (cannot change this setting)
source NAT settings >WAN interface: dedicated WAN (cannot change this setting)
destination NAT settings > internal ip address: 192.168.11.123 (ip address of my machine)
enable port forwarding: unchecked
translate port number: empty
external IP address: dedicated WAN

Rd client via rdweb cannot access local folder

hi,
i recently installed remote-desktop web-service on Windows 2008 R2 for remote user to access a non-proprietary Microsoft application.
the installation was made in one box include the application
a. Remote Dekstop Session Host
b. Remote Desktop Licensing
c. Remote Desktop Gateway
d. Remote Desktop Web Access
i have managed to configure it to allow internal and external users to access the application by using RDWeb.
there are 2 outstanding issues here:
1. i tested the RDWeb to access MS Office (Word/Excel) remoteapp and save a doc to local folder.
tried to save it into my local folder, but it always ended-up with an error :
"Network error: Windows cannot access \\tsclient\d\(any local folder given). You do not have permission to access \\tsclient\d\.. "
2. for non Microsoft remoteapp, is there a way (by Group Policy perhaps?) for rdweb-users to locate their local drive/folder within the application?
anyone has ideas to resolve it?
thank you in advance.
rgds.

Hi,
Thank you for posting in Windows Server Forum.
Terminal service Antivirus Exclusion list is available for previous version available but for new server it’s still not published. You can go through below thread might helpful in your case.
Antivirus exclusions for RDS 2012 R2
http://social.technet.microsoft.com/Forums/en-US/3352be76-7489-4a11-be7b-50dd03f94441/antivirus-exclusions-for-rds-2012-r2?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

I cannot access my stop button while data aquistion is going on

I have written an application that aquires data from a GPS reciever over a TCP connection and displays it on a graph in "real-time" and it works except that I cannot access my STOP button to stop the connection while it is working. I think I need to do something with multithreading and have done some multithread programming before to do background processing but cannot seem to get a handle on how to make this work. I am sure it must be something qite simple as it seems like something that is quite common. Any help greatly appreciated. My application started life as the Multi XY plot example program from NI.
Thanks
DEan

You can pass a reference to the dialog class into your thread and manipulate the graph that way. The following snippet demonstrates one way of doing this using the DAQmx C API
UINT CDAQMTExampleDlg::AcquisitionThread(void* pParam)
CDAQMTExampleDlg* pDlg = static_cast < CDAQMTExampleDlg* >(pParam);
double data[1000];
int32 read;
int error;
if( (pParam != NULL) && pDlg->IsKindOf(RUNTIME_CLASS(CDAQMTExampleDlg)))
CoInitialize(NULL);
TaskHandle taskHandle = pDlg->taskHandle;
CNiReal64Vector vectorData(1000);
double *pvectorData = (double*)vectorData;
while(!pDlg->stopTask)
DAQmxErrChk(DAQmxReadAnalogF64(taskHandle,1000,10.0,DAQmx_Val_GroupByScanNumber,pvectorData,1000,&read,NULL));
pDlg->m_Graph.PlotY(vectorData);
Error:
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
pDlg->stopTask = true;
CoUninitialize();
return 0;
void CDAQMTExampleDlg:nBnClickedButton1()
int error;
DAQmxErrChk(DAQmxCreateTask("",&taskHandle));
DAQmxErrChk(DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,-10.0,10.0,DAQmx_Val_Volts,NULL));
DAQmxErrChk(DAQmxCfgSampClkTiming(taskHandle,"",10000.0,DAQmx_Val_Rising,DAQmx_Val_ContSamps,1000));
DAQmxErrChk(DAQmxStartTask(taskHandle));
stopTask = false;
AfxBeginThread(AcquisitionThread, this);
return;
Error:
char errBuff[2048]={'\0'};
if( DAQmxFailed(error) )
DAQmxGetExtendedErrorInfo(errBuff,2048);
if( taskHandle!=0 ) {
/*/ DAQmx Stop Code
DAQmxStopTask(taskHandle);
DAQmxClearTask(taskHandle);
if( DAQmxFailed(error) )
printf("DAQmx Error: %s\n",errBuff);
void CDAQMTExampleDlg:nBnClickedButton2()
stopTask = true;
I also wanted to make sure that you know that if you have Measurement Studio 7.x, you have access to a C++ DAQmx API. You can find examples of that API under ..\MeasurementStudio\VCNET\Examples\DAQmx. The C++ API provides asynchronous methods, which means that aquisition worker threads are automatically created for you in the background instead of you having to create them yourself. Plus the C++ DAQmx API provides error handling via exceptions and is designed for use with MFC.
I hope this helps
Bilal Durrani
NI

Accessing LAN through Ethernet2 While VPN'ed using Ethernet1

Hey everyone, I'm trying to access a network share on my LAN through the second interface on my Mac. The first interface is being utilized by Cisco VPN to connect to my office.
I'm pretty familiar with routing tables from many years of Unix experience, but I can't seem to figure out how to specify that traffic going to 192.168.1.102 (my LAN network share) should go out of Ethernet 2 instead of Ethernet 1.
Does anyone have any ideas as to how I could do this?
Thanks in advance!

Aastoran,
Thanks for the quick reply. That is my understanding too, that our IT group has setup our Cisco VPN concentrator to tell the VPN client to setup it's IP routing to send all traffic through the VPN connection.
That is what seems to be what is being done if I dump my routing when I connect to the VPN (netstat -rn):
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default utun0 UCS 2 0 utun0
default 10.0.1.1 UGScI 1 0 en1
10.0.1/24 link#7 UCS 4 0 en1
10.0.1.1 0:1f:f3:43:f3:97 UHLWI 3 438 en1 721
10.0.1.2 0:21:e9:e3:56:2f UHLWI 1 3636 en1 561
10.0.1.4 127.0.0.1 UHS 0 0 lo0
10.0.1.5 0:17:ab:e0:84:67 UHLWI 0 0 en1 725
10.0.1.255 ff:ff:ff:ff:ff:ff UHLWbI 0 2 en1
12.71.251.131 10.0.1.1 UGHS 2 1 en1
17.151.16.23 utun0 UHW3I 0 0 utun0 3587
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 0 109 lo0
150.158.41.6 utun0 UHWI 25 36 utun0
150.158.48.4 150.158.48.4 UH 0 11 utun0
169.254 link#7 UCS 0 0 en1
172.16.156/24 link#9 UC 0 0 vmnet8
172.16.184/24 link#8 UC 0 0 vmnet1
It seems to have inserted a new default route ahead of the one I have from my AirPort one (10.0.1.1).
The VPN network is 150.158.. on the utun0 connection.
My question is if there a way to change the routing to what it was before so that only traffic intended for the 150.158.. network goes through the utun0 network?
I have read some stuff on the internet that talks about this, tried some things, but haven't it got to work.
Since this kind of IP routing table stuff is controlled on the Mac itself, I don't see how the Cisco VPN router would be able to prevent me from doing this or am I missing something?
Do you or anyone have experience with setting up this IP routing stuff when you have multiple connections?
Alan

Scheduled Task to run as Local System cannot access the Netlogon Share in Windows 8.1

I've created a Scheduled Task that is setup to run as the local System Account which uses cscript.exe to execute a VBScript residing on the Domain Netlogon Share. It works perfectly on Windows 7, but fails miserably on Windows 8.1. When I open a command
prompt as the System account and try to run the script from the Netlogon share manually, I get the following error:
CScript Error: Loading script \\<FullyQualifiedomainName>\Netlogon\xyz.vbs failed (The account used is a computer account. Use your global user account or local user account to access this server. ).
Is there something different I need to set in Windows 8 to get this to run?
Thank you!!
Eric Myers

Hi Eric,
What's the result of Arnav's question?
How did you set it? Please set it as the following steps:
1.Go to Start > Administrative Tools > Task Scheduler
2.In the Task Scheduler window double click your task, and on the "General" tab, under "Security options" section, click the "Change User or Group" button.
4.Make sure "From this location" is set to the local machine name (to change click "Locations" button and select the local computer name)
5.Type "SYSTEM" in the text box and press ok . Under "When running the task, use the following user account:" you should see "NT AUTHORITY\SYSTEM".
Karen Hu
TechNet Community Support

Cannot access Windows 7 share from 10.5.8

I have a PC running Windows 7 Ultimate with a share named "share" secured to my Windows user id. I am able to connect to the share from my Macbook pro (in finder) with my id/password and I can see the share, but when I try to open the folder representing the share I get the message "The operation cannot not be completed because the original item for share cannot be found.
If I go to the PC and disable sharing the folder, and then re-enable sharing the folder I can access the files in the share temporarily. After some period of time (often after the Macbook has gone to sleep) the error returns.
Running OS X 10.5.8 on a Macbook pro.

Hi -
Sorry for not being more clear: I can only have file access from my Mac. I.e. I have no other access to the PC Server than through smb. I have no right to set or reset access rights. But if the rights are set ok for smb://server/main and I cannot open the sub-directory /a though finder, why does it then work if I use
smb://server/main/a ? And so forth? That problem did not occur before upgrading to 10.5.5.

Unable to access local machine after a VPN connection

I have been previously able to control other machine are our network after making a successful VPN connection, until we have to rebuild the server. I have configure everything as before (as I believe), but I am still unable to connect to other local machines. I am able to connect to our xserve and shared drives (via AFP). ARD ports are open as neccessary. thank you

Hi n.dave, and a warm welcome to the forums!
So, I take it all the numbers are faked?
Is the 5th number on the failed on in your Network?

Win 7 Client cannot access Win 2012 share by domain name

Hello Everyone,
We have Windows 2012 R2 Server configured as Domain cum File Server Role,
There are 20 Win7 Clients / Domain Users who access and used their specific folder on server with \\Servername\Foldername
After some hour (not fixed) for some users (not specific) the server path goes unavailable, but the same folder is accessible with IP address like \\192.168.1.1\Foldername. and after rebooting Win7 Client we can again access the server folder with name.
This happen to any users anytime and the same time other users can access their folder by name,
Please help me on this issue..
Thanks in Advance

> After some hour (not fixed) for some users (not specific) the server
> path goes unavailable, but the same folder is accessible with IP address
> like \\192.168.1.1\Foldername. and after rebooting Win7 Client we can
> again access the server folder with name.
This is a kerberos issue.
By default, tickets (especially the TGT which is issued at logon) have a
live time of 8 hours or so (can be adjustet). If this ticket expires and
cannot be renewed (due to a lack of connectivity to a DC or whatever
infrastructure issue), Kerberos fails and ressources cannot be accessed
via name.
IP on the other hand always uses NTLM and thus still works.
How the Kerberos Version 5 Authentication Protocol Works:
https://technet.microsoft.com/library/cc772815.aspx
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Cannot access local DFS shares while VPN is active

Similar Messages

Maybe you are looking for