Cannot access me22n, me22 works

Hello,
in a newly installed SAP I cannot access me22n. When I enter transaction code me22n, transaction me23n starts instead, but all input boxes are greyed out, I cannot enter anything. F7 does not work aswell.
SU53 says there is no authorization-trouble, but I do have my doubts. ME22 and ME23 work just fine.
Any ideas?
Alicia

Hi,
Whenever you newly install the SAP there will be no transaction data, if you run the T-code: ME22n how can system show you the PO if there is no transaction data at all so the screen contains blank in grey mode.
Solution:
Create a PO and then go to Me22n you can see the created PO in change mode.
Hope you got the solution.
Regards,
Kumar

Similar Messages

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

I have a new Apple TV which is working fine except that I cannot access .mov files which are in my iTunes Library. How can I get to these? I can run them on my computer and select Apple TV on the screen, but the Apple TV goes to a black screen

Mov is a container format, you'd need to look at the codec used by the movie file inside the container to know whether it will work with the Apple TV or not.

TS1398 my ipod touch worked fine on my wifi home network. After not using my ipod for a month or so, I cannot access the internet. All other devices work fine. Thus, its not my home wifi....I tried resetting...forgetting....nothing works...still cannot ac

hello - my ipod touch worked well until a couple of months of non-use. Now, I cannot access the internet thru my wifi. All my other devices have no such problem. I have tried resetting wifi, "forgetting network" turning wifi off and on....nothing works....can anyone help?

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Does the iPod see the network? Error message? Does the iPod connect to other networks?

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

HT1222 I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!!!!!!

I just installed this update and now I cannot access "Mail" at all. I tried reinstalling the program, but that does not work, either. Help!

Paldeng, thanks for the suggestion. I've done all that. I can connect to the server, but apparently they are not recognizing my ID and password. I can use the server program if I don't go through Mail (using the same ID and password). My mother in another state with another provider has had the same email issue, as also my husband on his laptop who uses the same internet connection I do. His worked fine until we had it repaired at the Apple store and all the original programs reloaded (with the required updates, I assume). We can receive email in Mail, we just cannot send.
I contacted my service provider, and we went over my connections. They said it was not their problem and connected me with Apple, resulting in a charge to me because my warranty is long expired. Apple swears it is not their problem, it is the provider, so here I sit. My son was able to fix my Mom's Mail (she's 97) and got my husband's working also, until mine went out, by tweaking connection descriptions and ports remotely. The thing is, we had not messed with any of those settings, so what changed? I just did not want to bother my son again, as he has many other demands on his time.
Since this fiasco with the Mail v4.6 update, I'm wondering if something else was updated that works well with Lion and Mountain Lion, but does not work well with Snow Leopard and Leopard. I think the problem I had with the Mail update was that my Mail program had been renamed to Mail (original), and therefore was not being recognized by the update. Perhaps they had another tweak in there somewhere that is affecting outgoing mail connections?

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item.

Working in Windows 8.1, trying to open Lightroom 3.6 64 bit, get the error message: Windows cannot access the specified device, path or file. You may no have th appropriate permissions to access the item. I have changed the permissions to everyone and it doesn't work

Any suggestions please?

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help?

My motherboard "fried" on my computer when the fan quit working. I cannot access my hard drive on my old computer. I just downloaded ITunes on my new computer; assumed it would pull all my playlists in under my Apple ID and password-no such luck. Help Please?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

I cannot access iTunes on my desktop. Works fine on my laptop. Message says "The iTunes Library .itl is locked, on a locked disk, or you do not have write permission." The disk is not locked.

I cannot access iTunes from my deskyop. Worked great until a couple of days ago, then I now get the message that "The iTunes Library .itl is locked, on a locked disk, or you do not have write permission for this file." I have not turned on any parental controls on the desktop. I have reloaded iTunes several times. No luck. I've run virus scans several times. No luck. I've restarted & tuned off the computer several times. No luck. I've uninstalled iTunes then reinstalled several times. No luck. Any thoughts?

To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!

ITunes has stopped working. Can play songs, but cannot access store. What do I do?

iTunes has stopped working. Can play songs, but cannot access store. What do I do?

Hello there, Ellen317.
The following Knowledge Base article provides some great in-depth steps for troubleshooting your issue. Start with the section titled Troubleshoot issues in Windows:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro

Server 2012 Local Shares - Cannot access using \\IP but works via \\localhost

I've been stuck on this problem for the last couple of days and I can't find a solution on the internet that works.
I have a Windows Server 2012 instance running on Amazon AWS with a public IP address. I am using it as an SCCM (System Center 2012 Configuration Manager) Server (so it is a Domain Controller also). I realize that it's probably not best practice to use a public
IP here, but I'm in a weird position where we are not connecting any of the Clients to the actual Domain (they are Workgroup computers all around the world). The goal here is to use SCCM to deploy software packages to all of the Clients, which are not on the
same LAN/VPN/Domain.
This is my first time setting something up like this, so I followed this guide. I am able to get the Workgroup computers to show up in the SCCM Server Device list (via manual client install), but these Workgroup computers need access to the Server's shares
to download the software packages. On Amazon, I opened all ports and allowed all IPs to communicate with the Server. I am able to RDP into the Server from any Workgroup computer using the IP address, but cannot access the Server's SMB shares even though I
am attempting the connection with a Domain account with access to those shares.
I decided to see if I can even connect to the shares locally on the Server. Logging in with an account with administrator privileges, I can access \\localhost\shares without
a problem. But when I try to do \\X.X.X.X\shares,
it asks for user/pass (confirming that it is able to connect) and I put in the correct credentials for the account with administrator privileges (using DOMAIN\ACCOUNT), but it continually says that the user/pass is incorrect. After I click cancel, an error
comes up saying "Error Code 0x80004005 Unspecified Error".
It is crazy to me that the administrator account that is logged in cannot access the local shares via the public IP address... obviously no remote computer would be able to access the shares if the Server itself cannot. I have tried disabling the firewall,
but this makes no difference. I am able to ping the IP from the Server and I get a response.
I have searched around the internet for a solution but nothing has worked. Here are some of the suggestions I've found (that have failed):
- Making sure "Client for Microsoft Networks" and "File and Printer Sharing for Microsoft Networks is installed and enabled for the Ethernet Adapter
- Enabling NetBIOS over TCP/IP in IPv4 properties
- Ensuring IPv6 is disabled
- Server, TCP/IP NetBIOS Helper, and Workstation (services) are all running
Any ideas? Sorry for such a long post, just wanted to get as many details as I could. All help is appreciated. Thanks!
Shawn

Hi,
Are there any anti-virus software or other third party products running on the server? If yes, please disable them to see if it resolves the issue.
Here is a similar thread below I suggest you refer to:
Shared Folder Access
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c0bbbe8e-55d8-467c-bb85-2b98f122cc15/shared-folder-access?forum=winserverPN
Best Regards,
Amy

Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?

Got help fixing my youtube problem, now that is working. In the process of making the fix, lost my aol set up. Re installed it, but cannot access the icon. How do i get my AOL back?

If it's an application, it should be in the Applications folder. If in doubt, double click on the hardrive icon to open it up, then press Command+F (find) and in the window that comes up for what you want to find, type in AOL and it should appear. You can either drag it to the Dock for easy access or make an alias of that, and drag that alias to the Dock. Oh, and just so's you know, this forum is for Desktop macs only. We may be able to answer your question about a MacBook Pro. Same kind of animal, but different breeds.
good luck
John b

Cannot access me22n, me22 works

Similar Messages

Maybe you are looking for